Organizational Model Generation

What is the procedure for generating an Organizational Model using a report?

Hi Everyone,
I want to generate the Org. Model for sales in CRM with data in R/3. Normally, the sales offices are assigned to multiple sales area. I understand that this is possible in CRM through the enhance Enhanced Backend Integration Version. I was wondering which task should I perform first: switch to Enhanced Backend Integration Version or generate the sales Org. Model from r/3? I'd appreciate your reply. Points would be rewarded. Thx

Similar Messages

Issues with Organizational Model in CRM

Hi guys,
           We are implementing CRM 5.0 and I generated Organizational Model in system using Report: CRM_ORGMAN_R3_ORGDATA_GENERATE. This report generated organizational model with no errors. But there is a issue with org model:
In our R/3 system same sales office are assigned to multiple sales area and same salesgroups are assigned to multiple sales office due to this in CRM when the org model generated it only assigned the sales office and sales group to sales org 1000 however sales org 2000 and 3000 left unassigned.
eg:
R/3:
Sales office assigned to
sales area: 1000   10   10
                       001
                       002
                       003
                 2000   10   10
                      001
                      002
                      003
And after generation in CRM:
Sales org: 1000
                  sales office: 001
                                    002
                                    003
Sales org: 2000
                   no sales office or sales org assigned.
When I am trying to create it manually then it gives me an error: "attribute_R/3_SA_ORG with value xyx already assigned".
Did anybody faced similar issue?
I even ran the report for to change the org model to enhanced version but it didnt helped.
Please give your suggestions.
Thanks
Ankit

Hi Ankit,
Its common that the sales office are only assigned to the first sales organiz unit in
CRM structure in PPOMA_CRM. The same for the sales groups that are only assigned under the first sales office unit in CRM structure in PPOMA_CRM.
No mather, the important thing is that under Function tab > Sales office tab, for a sales office, the system has all the possible combinations for R/3 sales org, R/3distribution channel and R/3 division.
And the same under Function tab > Sales group tab, for a sales group, that must contain the possible combinations for R/3 sales org, R/3 sales office, R/3distribution channel and R/3 division.
In this way, you have the structure like:
SALESORG1001
   SALESOFFICE 1100
       SALESGROUP 100
   SALESOFFICE 1200
   SALESOFFICE 1300
SALESORG1002
SALESORG1003
But inside SALESOFFICE 1100 details you have something like:
Sales office tab:
R3 sales org | R3 DC | R3 Div
1001              10         01
1002              10         01
1003              10         01
And under Sales Group 100 you have something like:
Sales group tab:
R3 sales org | R3 Sales Office | R3 DC | R3 Div
1001              1100                  10         01
1002              1100                  10         01
1003              1100                  10         01
1001              1200                  10         01
1002              1200                  10         01
1003              1200                  10         01
1001              1300                  10         01
1002              1300                  10         01
1003              1300                  10         01
Hope it helps,
Susana Messias

Transferring Organizational Model

After the organizational model has been generated in CRM, can we transfer the sales structure to ECC (using delta upload), if at all if we modify the generated sales structure in CRM? Also if there are any changes made in ECC sales structure after the organizational model has been transferred to CRM, can we transfer the changes to CRM by installing the enhanced backend integration version of the CRM organizational model and copying entire sales structure from ECC to CRM?

Hi Namrata,
I believe this generation of Organizational model has been done using report:
CRM_ORGMAN_R3_ORGDATA_GENERATE.
Once you downlad an org structure from ECC, you cannot change it in CRM system. It can only be changed in the source system that is ECC.
Once you change the org structure in R/3, the changes wont be replicated back in CRM!!! Well, this is a disadvantage of doing it this way.
A better way is:
Create Org structure in R/3 and CRM independantly and then link them in CRM;
PPOMA_CRM-->Open your Org Unit >Functions Tab> select R/3 Sales org
In this case, you can make changes to org Units on both sides.
Hope the information is useful to you!
Sharif.

Number range of BP in the Organizational Model

Hi
I created in the transaction PPOCA_CRM my Org.Model when i save de data the system assign a number of BP to the unit, but i have two different Number Range; one to create BP's type 3 that is internal range and the second one i want to use for de Organizational Model but when i save de data the system assign the first one. (Note that the second one is internal too)
Do you know any transaction where i could configure what number range the system have to take when i create the Organizational Model??
Thanks in advanced
:P

Hi Susana,
Unfortunately there is no unique transaction that allows the system to distinguish between CRM Organizational Unit and Business Partner assignments. Transaction BUCF is the transaction that you would go to create the number range assignments to busines partners. Whatever range you designate as the Internal Standard Grouping will be used to assign Org Unit BP Numbers as well as other business partners that utilize internal number assignment. What happens is that once you designate an internal standard group assignment in CRM that number range will be used for all assignments whether that is for Business Partners, Org Units, etc. You do not have the option to create multiple Internal Standard Group references.
If you have a requirement to assign a unique number range to an Organizational Unit different than the business partners you create, some development will be necessary. I'm not sure how complex this will be, but I can imagine it won't be easy as you are restricted to only one internal standard grouping. Hope this helps.
Gil

Business Partner in Organizational Model Missing

Hi
I have added an Org Unit in Development Server and the ID and BP number is generated.
I have Transported from Dev to Quality server by using RHMOVE50 to move the org unit.
The Org unit and ID are transported successfully but the BP number is missing.
Note: Earlier for all other Org Units in Qulaity the BP Number exist.
Please prove me solution and points will be rewared.
Thanks and Regards
Masthan

Hi,
Apart from the above steps given by others you can also follow these steps as they did work in my scenario, this generally take some hours for the system to generate the BP ids so its better to schedule these activities in the evening so that when the Ids would be visible the next day I dont know whether this is a standard but this did happen in my case as i had to create the org structure twice so i had this experience twice.
Scenario when the buffering is not done and the Business partner id is not getting created in ppoma_crm
Check Settings for Attribute Maintenance
Check the consistency of the attribute assignments to the organizational units.
1. Access the activity using the following navigation options:
Transaction code SPRO
SAP CRM IMG menu Customer Relationship Management  Master Data  Organizational Management  Organizational Model  Tools  Check Settings for Attribute Maintenance
2. Execute the check.
Organizational Data Settings Check
See documentation of the IMG activity for details about this check
1. Access the activity using the following navigation options:
Transaction code SPRO
SAP CRM IMG menu Customer Relationship Management  Master Data  Organizational Management  Organizational Model  Tools  Organizational Data Settings Check
2. Execute the check.
Setup Buffering for Sales Scenario
Report HRBCI_ATTRIBUTES_BUFFER_UPDATE is used to buffer the attributes of organizational management objects. To enable buffering you have to maintain view T77OMATTR.
Enable Buffering for Sales Scenario
1. Access the activity using the following navigation option:
Transaction code OOATTRCUST
2. Select the structure node Scenarios.
3. Check the checkbox in the column Buffering for the scenario SALE.
4. Choose Save.
Update Buffers for Sales Scenario
1. Access the activity using the following navigation option:
Transaction code SA38
2. Call transaction SA38.
3. Select the report HRBCI_ATTRIBUTES_BUFFER_UPDATE
4. Select the checkboxes for Delete All Buffers and Restructure buffer on Date.
5. Choose Execute (F8).
In note 737315 further details regarding this topic are described. Note you can also schedule a job in transaction SM36 to run this report regularly.
Hope this helps.
Regards,
Amit

Restore standard organizational model in CRM

Just out of interest: if I were to convert the organizational model in CRM into an enhanced one, is there any possibility to later restore the standard organizational model, for instance via a backup?

Just out of interest: if I were to convert the organizational model in CRM into an enhanced one, is there any possibility to later restore the standard organizational model, for instance via a backup?

Is there a way to use EJBs directly inside WDJ without Model generation?

Hello,
Is there a way to use EJBs directly inside WDJ without Model generation, to avoid producing tonnes of code and reuse the JPA Entities?
Thanks
Sebastian
Edited by: Sebastian Lenk on Nov 3, 2010 7:01 PM

of course, you can.
it's pure java programming.
Context ctx = new InitialContext();
   Object o = ctx.lookup(
"sap.com/HelloWorldEAR/REMOTE/HelloWorldBean/com.sap.sdn.ejb.HelloWorldRemote");
   HelloWorldRemote helloRef = (HelloWorldRemote)
    PortableRemoteObject.narrow(o, HelloWorldRemote.class);

Customer name is not updating in Organization model

Hi All,
One employee is created with the name "test customer" in ECC and it is assigned to organization model in CRM. After that the the employee name is changed fom test customer to __customer test. Now same changes is updating in CRM but not updating in Organization model?
can you plz tell me why the employee is not updating in Organization model?
Edited by: prajesh24 on Jun 16, 2011 11:08 AM
Edited by: prajesh24 on Jun 16, 2011 11:32 AM

Hi
The changes to the business partner data flows through the middleware in run time.
But if you assigned the user with some initial name as XYZ. Then change the name of the business partner to X1Y1Z1, then you need to remove the earlier entry in the name of XYZ and assign the new entry X1Y1Z1 manually.
As a standard, it will not update the name in the organisational data in CRM.
Hope this will be helpful.
Regards

What is the latest model/generation for ipod touch?

what is the latest model/generation for ipod touch?

Stedman1
I'm not sure how all of this works but I read a few of yur comments and figured you'd be the person to ask! I have an iPod touch as well as my iPhone 4. I'm trying to find an otter box for the touch because I truly love it on my ip4, not to mention ive given the touch to my 6 year old and NEED the protection. Anyway, I'm not positive which generation it is and don't want to order the wrong one. The model # is A 1367.
Any help?? Please!!!!

How to transport organization model

Hi Experts...
how to transport organization model from development server to testing server in CRM FUNCTIONAL MODULE.
Thnx..

Hi ,
Refer to this thread:
[Transport of Organization Structure;
Cheers, Satish

Web Dynpro Model Generation for Application Services

Hi Experts,
I'm currently experimenting with the new functionality provided by CE, but there is one thing that I can't seem to figure out. How does the new Web Dynpro model generation work with regards to CAF Application Services? I'm trying to call an application service from a web dynpro application, but it seems as if models are completely different from Netweaver 7.0. What type of model do I need to create? Do I have to expose the application services as web services?
I've tried creating an EJB model and then binding the model to the context, but I kept receiving null pointer exceptions when doing this and I'm not sure if this is the correct way to do this. Can anybody point me to some good documentation on Web Dynpro/CAF interaction in CE?
Thank you,
JP

Hi JP,
You are right, the CAF models are completely different in NW CE 7.1 compared to NW 7.0.
CAF Application Services in CE 7.1 are in fact EJBs. So the EJB model importer is the way to go. You can find <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/45/dd45e4bc295595e10000000a1553f7/frameset.htm">documentation</a> and some <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/45/f7f744aea471fae10000000a1553f6/frameset.htm">tutorials</a> on help.sap.com. If you still have troubles after you go thru these, please post your concrete issues and I'm sure we'll be able to figure out what's been going wrong.
HTH!
-- Vladimir

Problem to assign BP in organization model

Hi sap
I have configured the service desk in solution manager.
I create my organization model from transaction ppoma_crm.
Now I think that I must assign business partner to organization units (first level support, second level support ..) but I can't do it.
Anyone know can please tell me if exist a document that show step by step procedure to create a oranization model, assign business partners and cretate automatic assigment of message?
thanks in advance
best regards

Hi Giovanni,
have a look at /people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Regards

Organization Model download from R/3 to CRM

Hi Guys
We are maintaining the complex Organization model in R/3 system and we need to Download the complete organization Model from R/3 to CRM and its relevant Organization structures too. I could not found a way what is the download object to be used to download the Organization model from R/3 to CRM .
will the Transaction CRMC_R3_ORG_STRUCTURE download the Organization model also , and what is the prerequisites for this organization model download
Thanks in advance
Warm regards
Rajasekhar

Dear Jayesh
1) Do the ALE specific settings like creating Logical systems , Rfc destination,
Distribution Model .
2) Specify the filters in the distribution model as per the note 312090, 550055
3) below link will be usefull to u
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1
Warm regards
Rajasekhar

Attributes value in Organizational Model

HI,
Iu2019ve created a new attribute for a org unit in scenario service. Itu2019s attribute REGIOGROUP based on values of this field of table ADRC.
Now, I need to maintain attribute values for this attribute for each OU to get BP determination.
The problem is that I need to have many different values in each OU for this attribute; for a several value entries, I need to automatically determine a OU for each BP.
Is there any way to set this values from a pre-created table or do I need to set this manually (all values in tx PPOSA_CRM for eah OU) ?
EX: OU 1 values 100101, 100102, 100103u2026 100999
OU 2 values 010110, 010111, 010112, u2026010199
Best Regards,
Teresa Lopea

check this link for [attributes values in organizational model|http://sapcrmlearn.blogspot.com/2009/02/organization-model.html]

Organizational Model Determination Rule

Hello !
I am looking for an organizational model determination rule which is looking for the Org Unit of the given employee responsible. Could anybody help?
Maybe a little more explanation. I created a partner determination procedure which looks for the employee responsible via the business partner. The system should then look for the organizational unit in the org model, which belongs to the employee responsible. Therefore I need an organizational model determination rule.
Thanks a lot!
Astrid

Hi Prajit ,
We want to determine Org based on employee responsible but not on basis of USER.
Employee responsible will be assigned to a particular position in Organization .
We want to determine Organization unit where Employee is assigned to that particular position.
When employee resposnsible is changed Org unit (Service ) should be changes .
Please suggest solution.
Thanks & Regards,
Anup Reche

Organizational Model Generation

Similar Messages

Maybe you are looking for