Organizational reassignment not permitted
Hi,
I have tried to change poistion,personnel area,employee group and employee subgroup, system throwing an an error "Organizational reassignment not permitted"
Can any one provide your valuable suggestions why i am not able to change them.
Thank you in Advance,
Hasini
Hi,
Please check note 116007 "PG162: Organizational reassignment not possible".
To eliminate this error message, I would ask you to run the report RPUPAV00 for all employees. Please read also the documentation of report RPUPAV00 at first.This report was created to handle the reported
problem.
Please also read carefully the documentation of feature IVWID. Probably you are using different view indicators, e.g. for varying personnel areas.
Program RPUPAV00 is setting the view indicator (VIEKN) on the basis of the IVWID configuration.
The conversion should work correctly and afterwards no PG162 message should occur any more. You can check afterwards via transaction SE16, table PA0003 if the view indicators have been changed.
With regard to running RPUPAV00, if you do not have feature IVWID defined properly, the program likewise will not update VIEKN.
I hope this helps,
Daniela.
Similar Messages
-
Organizational reassignment not possible
Hi,
When i am trying to change the employee group from active(1) to terminated(5) in the transaction code PAL3 i am getting the error "Organizational reassignment not possible".So please guide me to solve this problem.I am with ECC 6.0
Regards
Ravihi,
for the organization reeassingment you need to perfrom the action for the employee by useing T.code pa40.
and you have to create the action
1. copy the all infotypes (infotypes which you maintain previously for that employee )
2. user group ,
run the action,
RupaPrasad. -
User weblogic is not permitted to boot the server
Hi,
I am new to OES and after running the configtool, creating the ASIAuthorizationProvider and ASIRoleMapperProvider (both has Defaul Identity Directory: wls_dir and Application Deployment Parent: //app/policy/wls_app), binding the SSM, i get this error when starting the WLS admin server:
15:33:26.312 EVENT Starting Jetty/4.2.25
15:33:26.859 WARN!! Delete existing temp dir C:\BEA_HOME_10\ales32-ssm\wls-ssm\i
nstance\wls_ssm\work\jar_temp\Jetty__8000__ for WebApplicationContext[/,jar:file
:/C:/BEA_HOME_10/ales32-ssm/wls-ssm/webapp/arme.war!/]
15:33:30.515 EVENT Started WebApplicationContext[,ARMEService]
15:33:32.562 EVENT Started SocketListener on 0.0.0.0:8000
15:33:32.562 EVENT Started org.mortbay.jetty.Server@176bf9e
ARME is started now
<Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <BEA-090082> <Security initiali
zing using security realm wls.>
<Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <BEA-090404> <User weblogic i
s not permitted to boot the server; The server policy may have changed in such a
way that the user is no longer able to boot the server.Reboot the server with t
he administrative user account or contact the system administrator to update the
server policy definitions.>
<Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <BEA-000386> <Server su
bsystem failed. Reason: weblogic.security.SecurityInitializationException: User
weblogic is not permitted to boot the server; The server policy may have changed
in such a way that the user is no longer able to boot the server.Reboot the ser
ver with the administrative user account or contact the system administrator to
update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitte
d to boot the server; The server policy may have changed in such a way that the
user is no longer able to boot the server.Reboot the server with the administrat
ive user account or contact the system administrator to update the server policy
definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown S
ource)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FAILED>
<Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <BEA-000383> <A critical s
ervice failed. The server will shut itself down>
<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
from the WLS AdminServer.log:
####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000436> <Allocating 3 reader threads.>
####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000446> <Native IO Enabled.>
####<Mar 5, 2010 3:33:06 PM SGT> <Info> <IIOP> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774386531> <BEA-002014> <IIOP subsystem enabled.>
####<Mar 5, 2010 3:33:11 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774391656> <BEA-000000> <Starting OpenJPA 1.0.0.1>
####<Mar 5, 2010 3:33:17 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774397171> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413421> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413500> <BEA-090663> <The DeployableRoleMapper "com.bea.security.providers.authorization.asi.RoleProviderStub" implements the deprecated DeployableRoleProvider interface.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413531> <BEA-090662> <The DeployableAuthorizer "com.bea.security.providers.authorization.asi.AuthorizationProviderStub" implements the deprecated DeployableAuthorizationProvider interface.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm wls.>
####<Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090082> <Security initializing using security realm wls.>
####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774414234> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414234> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FAILED>
####<Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Mar 5, 2010 3:33:34 PM SGT> <Info> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414359> <BEA-000236> <Stopping execute threads.>
also, i just noticed that when staring OES admin server i get the following from the logs:
system_console.log:
2010-03-05 15:19:04,218 [JettySSLListener1-1] ERROR com.wles.soap.BLM.BlmBindingImpl - getUndistributedAttributeChanges has not been implemented properly.
2010-03-05 15:27:17,656 [Thread-31] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
Communication Error:; nested exception is:
javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme group '//bind/wls' error report, policyno = 52:
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme 'asi.null.ARME.wls_ssm.asi.SGBLM010':
2010-03-05 15:27:33,015 [Thread-32] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:33,015 [Thread-32] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
Communication Error:; nested exception is:
javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
WLESWebLogic.wrapper.log:
INFO | jvm 1 | 2010/03/05 15:27:17 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
INFO | jvm 1 | 2010/03/05 15:27:17 | Re-throwing the fault...
INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: Client has closed the connection, error not reported to client.
INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: The exception is: com.bea.wles.management.console.utils.NestedJspException: Connection reset by peer: socket write error
INFO | jvm 1 | 2010/03/05 15:27:33 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
INFO | jvm 1 | 2010/03/05 15:27:33 | Re-throwing the fault...
although, it seems that the OES admin server is up since i am able to access the OES admin console.
i have tried playing around the policies to grant the "weblogic" the priviliges for an Admin but is still get the same issue. Although, when i try to distribute the changes in the policy, "ASI ( Policy for entire Oracle Entitlements Server system ) " still appears in the list of changes.
any thoughts on what the problem is? is there a way to force the distribution of the policy? maybe through the command prompt or other console?
Edited by: user9056644 on Mar 5, 2010 12:02 AMHave you applied CP2 or CP3 to OES? There were enhancements that allows these policies to be scoped within an organization. I only ask to help guide you on distributing policies for the runtime WLS domain. The ASI domain is only for the admin. There should have been a set of resources and policies created as a result of running ConfigTool for your new instance (looks like you named it 'wls'). If no CP, it will be in DefaultApp next to ASI.
You have to distribute policies for 'wls' immediately following running ConfigTool before starting WebLogic or you will put it into a state where it can't be started. The corrective action is to remove the state.ck file under C:\BEA_HOME_10/ales32-ssm/wls-ssm/instance/wls_ssm/work/runtime, distribute policies, restart WebLogic.
If you need to re-run ConfigTool (after installing CP for instance), revert the following files:
<domain>/config/config.xml
<domain>/bin/startWebLogic.sh | .cmd
Revert from the no-ales backups created. Remove the instance folder under C:\BEA_HOME_10\ales32-ssm/wls-ssm/instance. You can then re-run ConfigTool if you have to. -
Legal Unit and Foreign Trade organization are not in same country
Hi all,
We are currently working on a Maquiladora project under which our plants in Mexico will be assigned to a US company code.
However, when we try to define this org structure in GTS, we are getting the below warning message while assigning the Legal Units (with MX address) to the FTO (US address). The system allows us to save the config, but it doesn't appear to work correctly. For example, when I simulate an import into MX plant, the system is applying the US legal regulation rather than MX.
Has anyone encounterred this error or any suggestions? (One idea we thought about is to define the FTO with a MX address, not sure if this would be the right thing to do; one additional problem is, the given FTO also includes other US plants for which we do want to apply US legal regulation, should we rather define an entirely separate company code (US address) & FTO (MX address) for the given MX plants??)..Can someone shed some light on this subject? Thanks in advance. -Raj Palanivel.
Below is the full details of the warning/error:
Legal Unit xxx and foreign trade organization yyy are not in same country
Diagnosis
You tried to assign foreign trade orgnaization yyy in in US to legal unit xxx in MX.
This is not permitted. You must create the legal unit and the foreign trade organization in the same country.
System Response
The system does not permit this entry.
Procedure
Correct your entry.Hi Raj,
In GTS we can map the company codes to FTO's as one to one and FTOs to company codes as many to one in the same way plants and legal units.
So in this case you can maintain one dummy FTO related to Mexico and assign it to the plants in mexico.But in R/3 you will map the plants in mexico to US company codes.For this SAP has provided some BADI's to implement this functionality.we have also have some similar functionality which we have implemented it at the time of transfering outbound deliveries.So use the following BADI /SAPSLL/IFEX_SD0b_R3 and method IF_EXTEND_CON_CDOC. you need to maintain one custom table for the organization units which needs to be transfered.
Regards,
HAri Challa. -
Post 03- 10 Migration multiple Relay not Permitted errors from recipient
Hello all - I recently just started a new job in an organization that just recently upgraded from an Exchange 2003 environment, to Exchange 2010. Just within the past week, we finally took down our last 2003 system. Since then, we have received
a good number of bounce back messages from recipient servers with various specific error messages, but with a common theme "smtp relay not permitted". What's strange is at my last employer, we migrated from 2003 to 2007 and I recall having a similar
situation, but I can't for the life of me recall what the solution was.
So far, through a few hours of Google searching, all I have found are sources suggesting that this issue is a recipient server config problem, but I have a very hard time believing that it isn't a problem on my end, with this many of essentially the same
errors popping up. Also - I have noticed that if a user attempts to re-send an email to the recipient that previously bounced back, it will work.
I'm not sure what sort of config info from my server / local network I should share here, but i'll gladly share whatever may be necessary.
Here are a few of the bounce message that we have received (names/email addresses removed)
From: Microsoft Outlook
Sent: Monday, May 02, 2011 8:28 AM
To: name_removed
Subject: Undeliverable: FW: Dodson upkeep
pop-borzoi.atl.sa.earthlink.net rejected your message to the following e-mail addresses:
(recipient removed)
pop-borzoi.atl.sa.earthlink.net gave this error:
Authentication required. Help at http://www.earthlink.net/go/emailsettings
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: my_server
(recipient removed)
pop-borzoi.atl.sa.earthlink.net #550 Authentication required. Help at http://www.earthlink.net/go/emailsettings ##
From: Microsoft Outlook
Sent: Monday, May 02, 2011 9:47 AM
To: name removed
Subject: Undeliverable: RE: open invoice
mustang.ws9100.net rejected your message to the following e-mail addresses:
recipient removed
mustang.ws9100.net gave this error:
webmail.twgi.net (myserver.twgi.net) [65.242.24.100]:40159 is currently not permitted to relay through this server. Perhaps you have not logged into the pop/imap server in the last 30 minutes or do not have SMTP Authentication turned on in your email client.
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: myserver.twgi.net
recipient_removed
mustang.ws9100.net #550-webmail.twgi.net (myserver.twgi.net) [65.242.24.100]:40159 is currently not 550-permitted to relay through this server. Perhaps you have not logged into 550-the pop/imap server in the last 30 minutes or do not have SMTP 550 Authentication
turned on in your email client. ##
From: Microsoft Outlook
Sent: Monday, May 02, 2011 5:10 PM
To: name removed
Subject: Undeliverable: message subject removed
UNUSED-216-37-170-254.UNUSED.epix.net rejected your message to the following e-mail addresses:
recipient removed @cargas.com
UNUSED-216-37-170-254.UNUSED.epix.net gave this error:
Unable to relay for [email protected]
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery.
Diagnostic information for administrators:
Generating server: myserver.twgi.net
[email protected]
UNUSED-216-37-170-254.UNUSED.epix.net #550 5.7.1 Unable to relay for [email protected] ##
From: Microsoft Outlook
Sent: Tuesday, May 03, 2011 12:31 PM
To: name removed
Subject: Undeliverable: RE: SMO Destwin Implementation
cpanel-2.host.chi1.int-i.net rejected your message to the following e-mail addresses:
recipient [email protected]
cpanel-2.host.chi1.int-i.net gave this error:
webmail.twgi.net (myserver.twgi.net) [65.242.24.100]:27609 is currently not permitted to relay through this server. Perhaps you have not logged into the pop/imap server in the last 30 minutes or do not have SMTP Authentication turned on in your email client.
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: twgiex.twgi.net
[email protected]
cpanel-2.host.chi1.int-i.net #550-webmail.twgi.net (myserver.twgi.net) [65.242.24.100]:27609 is currently not 550-permitted to relay through this server. Perhaps you have not logged into 550-the pop/imap server in the last 30 minutes or do not have SMTP
550 Authentication turned on in your email client. ##
From: Microsoft Outlook
Sent: Tuesday, May 03, 2011 5:29 PM
To: name removed
Subject: Undeliverable: FW: Landscaping
host.clearimaging4.com rejected your message to the following e-mail addresses:
[email protected]
host.clearimaging4.com gave this error:
sorry, that domain isn't in my list of allowed rcpthosts; no valid cert for gatewaying (#5.7.1)
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: myserver.twgi.net
[email protected]
host.clearimaging4.com #553 sorry, that domain isn't in my list of allowed rcpthosts; no valid cert for gatewaying (#5.7.1) ##
From: Microsoft Outlook
Sent: Wednesday, May 04, 2011 8:39 AM
To: name removed
Subject: Undeliverable: FW: Proof of Insurance request
n22.c07.mtsvc.net rejected your message to the following e-mail addresses:
[email protected]
n22.c07.mtsvc.net gave this error:
relay not permitted
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: myserver.twgi.net
[email protected]
n22.c07.mtsvc.net #550 relay not permitted ##Also, i FINALLY have an excerpt from our send logfile that matches up to an email bounce:
Bounce message:
From: Microsoft Outlook
Sent: Sunday, May 08, 2011 9:43 AM
To: sender removed
Subject: Undeliverable: RE: Load of gas
server1.cbayhosting.com rejected your message to the following e-mail addresses:
recipient removed ([email protected])
server1.cbayhosting.com gave this error:
<[email protected]>... Relaying denied. Proper authentication required.
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery.
Diagnostic information for administrators:
Generating server: myserver.twgi.net
[email protected]
server1.cbayhosting.com #550 5.7.1 <[email protected]>... Relaying denied. Proper authentication required. ##
Send connector log file:
2011-05-08T13:43:01.761Z,Send mail to Internet,08CDAB5926F2B37D,2,15.32.0.46:9323,69.94.111.23:25,<,"220 server1.cbayhosting.com ESMTP Sendmail 8.13.7/8.13.7; Sun, 8 May 2011 09:43:02 -0400",
2011-05-08T13:43:01.761Z,Send mail to Internet,08CDAB5926F2B37D,3,15.32.0.46:9323,69.94.111.23:25,>,EHLO myserver.twgi.net,
2011-05-08T13:43:01.761Z,Send mail to Internet,08CDAB5926F2B37F,0,,64.18.4.10:25,*,,attempting to connect
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,4,15.32.0.46:9323,69.94.111.23:25,<,"250-server1.cbayhosting.com Hello webmail.twgi.net [65.242.24.100], pleased to meet you",
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,5,15.32.0.46:9323,69.94.111.23:25,<,250-ENHANCEDSTATUSCODES,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,6,15.32.0.46:9323,69.94.111.23:25,<,250-PIPELINING,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,7,15.32.0.46:9323,69.94.111.23:25,<,250-8BITMIME,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,8,15.32.0.46:9323,69.94.111.23:25,<,250-SIZE,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,9,15.32.0.46:9323,69.94.111.23:25,<,250-DSN,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,10,15.32.0.46:9323,69.94.111.23:25,<,250-ETRN,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,11,15.32.0.46:9323,69.94.111.23:25,<,250-AUTH LOGIN PLAIN,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,12,15.32.0.46:9323,69.94.111.23:25,<,250-DELIVERBY,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,13,15.32.0.46:9323,69.94.111.23:25,<,250 HELP,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,14,15.32.0.46:9323,69.94.111.23:25,*,2722844,sending message
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,15,15.32.0.46:9323,69.94.111.23:25,>,MAIL FROM:[email protected] SIZE=8054,
2011-05-08T13:43:01.793Z,Send mail to Internet,08CDAB5926F2B37D,16,15.32.0.46:9323,69.94.111.23:25,>,RCPT TO:<[email protected]>,
2011-05-08T13:43:01.855Z,Send mail to Internet,08CDAB5926F2B37F,1,15.32.0.46:9324,64.18.4.10:25,+,,
2011-05-08T13:43:01.886Z,Send mail to Internet,08CDAB5926F2B37D,17,15.32.0.46:9323,69.94.111.23:25,<,250 2.1.0 <[email protected]>... Sender ok,
2011-05-08T13:43:01.886Z,Send mail to Internet,08CDAB5926F2B37D,18,15.32.0.46:9323,69.94.111.23:25,<,550 5.7.1 <[email protected]>... Relaying denied. Proper authentication required.,
2011-05-08T13:43:01.902Z,Send mail to Internet,08CDAB5926F2B37D,19,15.32.0.46:9323,69.94.111.23:25,>,QUIT,
2011-05-08T13:43:01.918Z,Send mail to Internet,08CDAB5926F2B37D,20,15.32.0.46:9323,69.94.111.23:25,<,221 2.0.0 server1.cbayhosting.com closing connection,
It looks like the address that exchange is attempting to connect to, to send to chesapeake.net is at IP: 69.94.111.23. However, MX lookup for chesapeaeke.net returns mx: mxsrv.chesapeake.net 216.240.101.22 -
I can not access Calender.
Keep getting blocked by message.
The server responded with error.
Access to account "virgin net" is not permitted.
The server responded:
"403"
to operation.
CalDAVAaccountRefreshQueueableOperation.Please take each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
In the Internet Accounts preference pane, delete any calendar accounts you don't use.
If there's no improvement, delete all calendar accounts and add them back. With an iCloud account, all you have to do is uncheck and recheck the box marked Calendars & Reminders in the iCloud preference pane.
Step 2
You may be trying to access an invited event that you declined, or one that was rescheduled after you accepted it. The error message should give you a clue as to what it is. If the calendar is on iCloud, you can bring up the Calendar on the website and select
Show Declined Events
from the popup menu with the gear icon in the upper right corner of the page. The declined events will appear in gray, and one of them should match what's shown the error message. [Credit for this solution to ASC member Psi.]
Step 3
If you get the error when trying to accept an invitation in an email attachment, it's because the organizer didn't properly create the event.
Step 4
Follow the instructions in this support article. Modify as necessary for a calendar that's not on iCloud. -
Plant Not permitted for selected Doc Type
I have created new plant and assigned to existing Purchase organization. i am able to create PR but while creating Purchase order i am getting error
Plant Not permitted for selected Doc Typewhat is the error message number? double click the message to obtain.
I have not seen any assignment of doucment types to plants, nor a message like mentioned. -
I am running SL Server 10.6.8 and have a problem with only one iCal server account (mine). I am unable to delete a calendar that I created. I can rename it (was called "Home" and changed it to "Delete Me"). I can create new calendars and have one called "Home" and another called "Work" which I can also rename and delete without any problem. However, when I try to delete my original "Home" calendar, now called "Delete Me" it warns me that I will loose any appointments so I know iCal thinks there are events in the calendar otherwise it would not give that prompt. However, when I go to the year view and scan forward and back approx 20 years there are no events to be seen. I then confirm that I want to delete the account and then I get the following error with the option to "Ignore" or "Go Off-line"...
Access to account “NAME” is not permitted.
The server responded: “403” to operation CalDAVRemoveCalendarQueueableOperation.
If I ignore the calendar simply reapears and if I go off-line my calendar stops syncing and remains off-line until I try to take it back on-line at which time I get the above error again.
Any ideas how to fix this? I think it is because of this calendar I am unable to access my calendar via web as well. All other accounts on the server are able to but mine but going to eat this elephant one bite at a time and then resolve the ical web access afterwards.
Any help is greatly appreciated. Thank you.Found solution!!!!
After trying to delete the calendar "family" multiple times and reading through some threads... I was able to figure out that the "Family" calendar that we can't seem to delete is corrected to FAMILY SHARING. Here is what I did:
Went on my iPhone 5S
1.Go to Settings
2. Scroll down to iCloud; and click on it
3.Click on "Family"
4. Click on your name at the top (has to be the organizer, i think)- I was the organizer so it worked
5.Stop Family Sharing
6. Stop Sharing
Now you can go to your calendar app and delete it! here is how in case you don't know
1. Click on Calendar app
2. Click on the word "Calendars" in middle of screen
3.Click on "Edit" at top left hand corner of screen
4. Scroll down to the calendar you want to delete and click on it
5. Scroll to the bottom of the screen and click "delete calendar"
DONE!!
If you are using your calendar on a mac like I was.... hence why it took sometime to figure this out. You have to stop family sharing from iPhone (if you can do it on the mac- more power to you, I didn't try figuring that out) and then you can go on your mac (if your connect to WI-Fi):
right click the calendar you want to delete,
select delete and it should go away!
yay!! hope this helps!! -
Standard Role for 000000 for role category MKK is not permitted
Hello SAP Gurus,
I am working on RM-CA and was trying to create a business partner using T-code FPP1 and BUP1.
I was trying to create a business partner as an organization.
WHen I try to save the record I get the error "Standard Role for 000000 for role category MKK is not permitted" Msg P082.
I've checked the view V_TB003 and I see that the Standard Role is assigned to the MKK category.
Has anyone encountered this problem before? What is the fix for this? What am I missing?
ThanksHi Jamal,
Please check the following steps:
1. In view V_TB003, please check if the BP role category "MKK" is assigned to the BP role "MKK".
2. In view V_TB109, please check if the BP role category "MKK" is assigned to the transaction code FPP1
I hope it helps!
Regards,
Gabriel Santana -
Elements Organizer does not install when reinstalling PSE10
I have a problem that I cannot seem to resolve. Previously Adobe Photoshop Elements 10 had been running flawlessly on my computer and was easily opened by clicking the desktop icon which had a "C:\Program Files (x86)\Adobe\Elements 10 Organizer\Photoshop Elements 10.0.exe" target. After uninstalling and reinstalling Photoshop Elements 10, when I click on the Desktop icon to start the application, I get a dialog box that says "The item 'Photoshop Elements 10.0.exe' that this shortcut refers to has been changed or moved so this shortcut will no longer work properly". If I right click the Photoshop Elements 10 desktop icon and check properties, the Target says "C:\Program Files (x86)\Adobe\Elements 10 Organizer\Photoshop Elements 10.0.exe". When I open Explorer and navigate to where the target says the application file should be, the "Elements 10 Organizer" directory does not exist. The only directory that does exist is the "Photoshop Elements 10" directory and it contains the 'PhotoshopElementsEditor.exe'. Yes if I click on that file the Editor opens, however when I try to load the Organizer workspace once the editor is open, it does not load because the entire folder and application is missing. I even tried searching the entire C-Drive to find the Photoshop Elements 10.0.exe file but it was nowhere to be found.
To be specific, I had PSE8, PSE9, and PSE10 installed on my 64-bit Windows 7 Professional w/SP1 computer. I decided to uninstall PSE8 & 9 because I had just purchased PSE12 and wanted to make room for the PSE12 installation. When I tried to first uninstall PSE8, the uninstaller stopped with the warning that PSE8 was installed in the same directory as PSE10. The uninstall then terminated when I clicked on OK. Next tried to uninstall PSE9 and received the same warning and uninstaller termination. The same thing happened when I tried to uninstall PSE10. Faced with the situation that all three products were installed in the same directory and would not uninstall individually, I found it necessary to uninstall all three applications manually according to the directions on the Adobe's knowledgebase.
To uninstall PSE8, PSE9, & PSE10, first thing I did was create a system restore point which is something I always do just in case something goes wrong. Then starting with PSE8, I first printed out the Photoshop Elements Help "Manually remove Photoshop Elements 8 | Windows that I found at http://kb2.adobe.com/cps/826/cpsid_82673.html. Subsequently I printed out the directions for each product, PSE8, PSE9, and PSE10, are all on the Adobe website. Next I followed the directions contained in each article except for running the product uninstaller as I mentioned above and removed all three applications then rebooted my machine.
Next I reinstalled PSE10 and tried to open it only to find that it did not fully install especially the Elements Organizer. As mentioned you can open the Editor by going directly to the executable file however you cannot access the Organizer because it did not install and cannot be found anywhere on the computer. I have uninstalled and reinstalled PSE10 five time now each time using the product Uninstaller plus the "Manually remove PSE10" directions and I still cannot get the Elements Organizer to install.
My question is does Adobe have a utility that can be run after manually installing a specific product that would find registry entries that were not removed after completing the manual removal process? The problem I see is the manual removal process which shows possible registry entries to remove manually is built on the assumption that you were able to run the Uninstaller which is not the case with my problem.
Secondly does anyone have any suggestions on how to install both the PSE10 Organizer and Editor?I believe I found a solution but I need help in changing some of the parameters to reflect for a United States program install.
If you go to "Elements 10 Organizer is not installed [SOLUTION]" at http://forums.adobe.com/message/4745941 you will note the Poster says it is possible to force the install of Elements Organizer 10 by using the command line:
msiexec /i "E:\Adobe Photoshop Elements 10\ElementsOrganizer\Elements 10 Organizer.msi" TRANSFORMS=1031.mst ELEMENTS_DE_DE=1 ORGANIZER_DE_DE=1 STARTWATCHSERVICE=1 SUPPRESSREBOOT=0 NOT_STANDALONE=1 /l*v "C:\Users\<username>\AppData\Local\Temp\OrganizerInstall.log".
I found that the above command line input does in fact start the setup for the PSE10 "Elements Organizer" Installer except it is in a language other than English.
Is there anyone familiar enough with coding and command line prompts to change whatever paramenters are necessary to have the installer run in English.
Hopefully there are some Adobe Staff monitoring this message that can answer the question for me.
Message was edited by: DAllenJ2215 -
An entry in field Funds Ctr is not permitted for account 401000 Message no F5394
Hi Friends,
I have done Fund Management configuration and while posting the document through FB50, I am getting error message " An entry in field Funds Ctr is not permitted for account 401000 "Message no. F5394 and I also checked Field status and Posting keys for Gl account and everything looks fine..
Please help on this..
Thanks
GoutamHi,
please check the message the error will give you the table number or Programme name
go to SE38 for programme and for table SM30
system will show where is the exact error facing.
thanks -
[webgl] sluggish performance ( /dev/nvidia0 Operation not permitted )
We (folks on #archlinux already tried helping) have been at this for hours now... no solution found yet.
summary: webgl works but performance is sluggish(20 to 30fps) which makes me assume it's falling back to software rendering for some unknown reason
already tried many things: vmalloc kernel parameters, irq control left to bios/archlinux, being in the video group, not being in the video group, having an xorg.conf, not having an xorg.conf, different AGP aperture sizes in BIOS, regular gl performance is normal (60 fps (capped to display refresh) in glxgears), only webgl slugs, card (GT 7600 256MB VRAM) should support the required shader language version for webgl (and webgl performance is only sluggish in linux... so I think it must be a configuration issue on some driver/kernel/browser setting?)
Different browsers show different messages when started from the console but I don't know what to make of those and googling them did not reveal any solutions so far either.
browsers tested: firefox, google-chrome(from AUR), chromium
window managers tested: enlightenment, fluxbox
kernel: linux-lts
driver: nvidia-304xx-lts (can not use Nouveau as Nouveau keeps locking up the GPU)
It's a fresh archlinux installation (Ubuntu had the same performance problem btw in case that might be useful to know for looking for the cause).
Everything I tried so far, did not change anything about the sluggish webgl performance problem.
One thing I noticed is that /dev/nvidia0 and /dev/nvidiactl both do not exist until after "startx". Could that be a problem?
Here are some logs, hoping someone sees something which looks suspicious and knows what else I could try to make it work.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.23-1-lts (nobody@home-andyrtr-arch64-chroots-testing-x86_64-andyrtr) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP Thu Oct 30 19:41:12 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux-lts ipv6.disable=1 vmalloc=256M root=/dev/sda1 rw initrd=../initramfs-linux-lts.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005ffbffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000005ffc0000-0x000000005ffcffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000005ffd0000-0x000000005fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff7c0000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: ASUSTek Computer Inc. K8N-E-Deluxe/'K8N-E-Deluxe', BIOS 1012.007 01/18/2006
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
[ 0.000000] e820: last_pfn = 0x5ffc0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5fa00000-0x5fbfffff]
[ 0.000000] [mem 0x5fa00000-0x5fbfffff] page 2M
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x5c000000-0x5f9fffff]
[ 0.000000] [mem 0x5c000000-0x5f9fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x5bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x5bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x5fc00000-0x5ffbffff]
[ 0.000000] [mem 0x5fc00000-0x5fdfffff] page 2M
[ 0.000000] [mem 0x5fe00000-0x5ffbffff] page 4k
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x5fc97000-0x5ffbffff]
[ 0.000000] ACPI: RSDP 00000000000f9cb0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000005ffc0000 000030 (v01 A M I OEMRSDT 01000618 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000005ffc0200 000081 (v02 A M I OEMFACP 01000618 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000005ffc0400 004524 (v01 A0055 A0055003 00000003 INTL 02002026)
[ 0.000000] ACPI: FACS 000000005ffd0000 000040
[ 0.000000] ACPI: APIC 000000005ffc0390 000068 (v01 A M I OEMAPIC 01000618 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000005ffd0040 000041 (v01 A M I OEMBIOS 01000618 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000005ffbffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5ffbffff]
[ 0.000000] NODE_DATA [mem 0x5fc92000-0x5fc96fff]
[ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005dc00000-ffff88005f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x5ffbffff]
[ 0.000000] On node 0 totalpages: 393054
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6079 pages used for memmap
[ 0.000000] DMA32 zone: 389056 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x60000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88005fa00000 s86656 r8192 d23936 u2097152
[ 0.000000] pcpu-alloc: s86656 r8192 d23936 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386890
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux-lts ipv6.disable=1 vmalloc=256M root=/dev/sda1 rw initrd=../initramfs-linux-lts.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
[ 0.000000] Node 0: aperture @ e0000000 size 256 MB
[ 0.000000] Memory: 1532388K/1572216K available (5187K kernel code, 858K rwdata, 1640K rodata, 1136K init, 1300K bss, 39828K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:8448 nr_irqs:256 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 6291456 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2210.711 MHz processor
[ 0.010032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4421.42 BogoMIPS (lpj=22107110)
[ 0.010037] pid_max: default: 32768 minimum: 301
[ 0.010061] ACPI: Core revision 20131218
[ 0.020405] ACPI: All ACPI Tables successfully acquired
[ 0.020642] Security Framework initialized
[ 0.020671] Yama: becoming mindful.
[ 0.020955] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.025410] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.027465] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.027473] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.028144] Initializing cgroup subsys memory
[ 0.028166] Initializing cgroup subsys devices
[ 0.028170] Initializing cgroup subsys freezer
[ 0.028173] Initializing cgroup subsys net_cls
[ 0.028177] Initializing cgroup subsys blkio
[ 0.028234] tseg: 0000000000
[ 0.028253] mce: CPU supports 5 MCE banks
[ 0.028279] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.034575] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
[ 0.035713] ftrace: allocating 20111 entries in 79 pages
[ 0.049994] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.150150] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 0c, stepping: 00)
[ 0.160000] Performance Events: AMD PMU driver.
[ 0.160000] ... version: 0
[ 0.160000] ... bit width: 48
[ 0.160000] ... generic registers: 4
[ 0.160000] ... value mask: 0000ffffffffffff
[ 0.160000] ... max period: 00007fffffffffff
[ 0.160000] ... fixed-purpose events: 0
[ 0.160000] ... event mask: 000000000000000f
[ 0.160000] x86: Booted up 1 node, 1 CPUs
[ 0.160000] smpboot: Total of 1 processors activated (4421.42 BogoMIPS)
[ 0.160000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.160000] devtmpfs: initialized
[ 0.160000] PM: Registering ACPI NVS region [mem 0x5ffd0000-0x5fffffff] (196608 bytes)
[ 0.160000] pinctrl core: initialized pinctrl subsystem
[ 0.160056] RTC time: 14:37:08, date: 11/06/14
[ 0.160148] NET: Registered protocol family 16
[ 0.160332] cpuidle: using governor ladder
[ 0.160334] cpuidle: using governor menu
[ 0.160347] node 0 link 0: io port [1000, ffffff]
[ 0.160351] TOM: 0000000060000000 aka 1536M
[ 0.160356] node 0 link 0: mmio [a0000, bffff]
[ 0.160359] node 0 link 0: mmio [60000000, fe0bffff]
[ 0.160363] bus: [bus 00-ff] on node 0 link 0
[ 0.160365] bus: 00 [io 0x0000-0xffff]
[ 0.160367] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.160369] bus: 00 [mem 0x60000000-0xfcffffffff]
[ 0.160397] ACPI: bus type PCI registered
[ 0.160401] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.160498] PCI: Using configuration type 1 for base access
[ 0.161627] bio: create slab <bio-0> at 0
[ 0.161792] ACPI: Added _OSI(Module Device)
[ 0.161794] ACPI: Added _OSI(Processor Device)
[ 0.161795] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.161797] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.163305] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.164921] ACPI: Interpreter enabled
[ 0.164937] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.164955] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.164958] ACPI: Using IOAPIC for interrupt routing
[ 0.164998] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.165137] ACPI: No dock devices found.
[ 0.170533] ACPI: Power Resource [ISAV] (on)
[ 0.173609] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.173619] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.173626] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.173736] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.173739] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.173742] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.173745] acpi PNP0A03:00: host bridge window [mem 0x60000000-0xff7bffff] (ignored)
[ 0.173749] PCI: root bus 00: hardware-probed resources
[ 0.173755] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.173915] PCI host bridge to bus 0000:00
[ 0.173919] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.173922] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.173925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.173928] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfcffffffff]
[ 0.173943] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
[ 0.173955] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.174087] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
[ 0.174184] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
[ 0.174192] pci 0000:00:01.1: reg 0x10: [io 0x5080-0x509f]
[ 0.174203] pci 0000:00:01.1: reg 0x20: [io 0x5000-0x503f]
[ 0.174207] pci 0000:00:01.1: reg 0x24: [io 0x5040-0x507f]
[ 0.174221] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.174311] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
[ 0.174319] pci 0000:00:02.0: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
[ 0.174342] pci 0000:00:02.0: supports D1 D2
[ 0.174345] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174378] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.174441] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
[ 0.174448] pci 0000:00:02.1: reg 0x10: [mem 0xfebfe000-0xfebfefff]
[ 0.174472] pci 0000:00:02.1: supports D1 D2
[ 0.174474] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174506] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 0.174565] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
[ 0.174573] pci 0000:00:02.2: reg 0x10: [mem 0xfebffc00-0xfebffcff]
[ 0.174602] pci 0000:00:02.2: supports D1 D2
[ 0.174605] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174652] pci 0000:00:02.2: System wakeup disabled by ACPI
[ 0.174721] pci 0000:00:05.0: [10de:00df] type 00 class 0x068000
[ 0.174728] pci 0000:00:05.0: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
[ 0.174733] pci 0000:00:05.0: reg 0x14: [io 0xec00-0xec07]
[ 0.174755] pci 0000:00:05.0: supports D1 D2
[ 0.174758] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174790] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.174854] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
[ 0.174861] pci 0000:00:06.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.174866] pci 0000:00:06.0: reg 0x14: [io 0xe400-0xe47f]
[ 0.174870] pci 0000:00:06.0: reg 0x18: [mem 0xfebfb000-0xfebfbfff]
[ 0.174890] pci 0000:00:06.0: supports D1 D2
[ 0.174967] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
[ 0.174983] pci 0000:00:08.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.175075] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
[ 0.175082] pci 0000:00:0a.0: reg 0x10: [io 0x09f0-0x09f7]
[ 0.175087] pci 0000:00:0a.0: reg 0x14: [io 0x0bf0-0x0bf3]
[ 0.175092] pci 0000:00:0a.0: reg 0x18: [io 0x0970-0x0977]
[ 0.175096] pci 0000:00:0a.0: reg 0x1c: [io 0x0b70-0x0b73]
[ 0.175101] pci 0000:00:0a.0: reg 0x20: [io 0xc800-0xc80f]
[ 0.175105] pci 0000:00:0a.0: reg 0x24: [io 0xc400-0xc47f]
[ 0.175191] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
[ 0.175286] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
[ 0.175325] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.175388] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.175468] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.175549] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.175627] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.175752] pci 0000:01:00.0: [10de:02e0] type 00 class 0x030000
[ 0.175770] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.175780] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff pref]
[ 0.175790] pci 0000:01:00.0: reg 0x18: [mem 0xfc000000-0xfcffffff]
[ 0.175821] pci 0000:01:00.0: reg 0x30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.175934] pci 0000:00:0b.0: PCI bridge to [bus 01]
[ 0.175940] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
[ 0.175943] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
[ 0.175986] pci 0000:02:0b.0: [1106:3044] type 00 class 0x0c0010
[ 0.175998] pci 0000:02:0b.0: reg 0x10: [mem 0xfeaff800-0xfeafffff]
[ 0.176005] pci 0000:02:0b.0: reg 0x14: [io 0xbc00-0xbc7f]
[ 0.176047] pci 0000:02:0b.0: supports D2
[ 0.176049] pci 0000:02:0b.0: PME# supported from D2 D3hot D3cold
[ 0.176124] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.176127] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 0.176130] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.176957] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.177043] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
[ 0.177127] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.177211] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.177294] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[ 0.177374] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *11
[ 0.177454] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[ 0.177533] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
[ 0.177612] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
[ 0.177706] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
[ 0.177786] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[ 0.177867] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[ 0.177947] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
[ 0.178035] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[ 0.178144] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[ 0.178495] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178498] vgaarb: loaded
[ 0.178499] vgaarb: bridge control possible 0000:01:00.0
[ 0.178573] PCI: Using ACPI for IRQ routing
[ 0.178578] PCI: pci_cache_line_size set to 64 bytes
[ 0.178617] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.178621] e820: reserve RAM buffer [mem 0x5ffc0000-0x5fffffff]
[ 0.178834] NetLabel: Initializing
[ 0.178836] NetLabel: domain hash size = 128
[ 0.178838] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.178866] NetLabel: unlabeled traffic allowed by default
[ 0.178945] Switched to clocksource refined-jiffies
[ 0.193118] pnp: PnP ACPI init
[ 0.193168] ACPI: bus type PNP registered
[ 0.193275] pnp 00:00: [dma 4]
[ 0.193336] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.193401] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.193439] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.193480] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.193867] pnp 00:04: [dma 2]
[ 0.193932] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.194190] pnp 00:05: [dma 3]
[ 0.194334] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.194597] pnp 00:06: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.194863] system 00:07: [io 0x0190-0x0193] has been reserved
[ 0.194867] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.194870] system 00:07: [io 0x4000-0x40ff window] has been reserved
[ 0.194873] system 00:07: [io 0x4400-0x44ff window] has been reserved
[ 0.194876] system 00:07: [io 0x4800-0x48ff window] has been reserved
[ 0.194881] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.194987] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.194990] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.194993] system 00:08: [mem 0xff780000-0xff7bffff] has been reserved
[ 0.194996] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195070] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.195231] system 00:0a: [io 0x0480-0x0487] has been reserved
[ 0.195234] system 00:0a: [io 0x0d00-0x0d07] has been reserved
[ 0.195237] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.195468] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.195722] pnp 00:0c: [dma 0 disabled]
[ 0.195790] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.196055] pnp 00:0d: [dma 0 disabled]
[ 0.196135] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.196351] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.196355] system 00:0e: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.196358] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.196360] system 00:0e: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.196363] system 00:0e: [mem 0xff7c0000-0xffffffff] has been reserved
[ 0.196366] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.196611] pnp: PnP ACPI: found 15 devices
[ 0.196613] ACPI: bus type PNP unregistered
[ 0.203623] Switched to clocksource acpi_pm
[ 0.203683] pci 0000:00:0b.0: PCI bridge to [bus 01]
[ 0.203692] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
[ 0.203696] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
[ 0.203702] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.203705] pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
[ 0.203709] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.203715] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.203718] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.203720] pci_bus 0000:00: resource 6 [mem 0x60000000-0xfcffffffff]
[ 0.203723] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff]
[ 0.203726] pci_bus 0000:01: resource 2 [mem 0xba800000-0xda7fffff pref]
[ 0.203730] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.203732] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.203816] NET: Registered protocol family 2
[ 0.204157] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.204482] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.204915] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.205152] TCP: reno registered
[ 0.205159] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.205233] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.205488] NET: Registered protocol family 1
[ 0.205869] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.290220] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 0.370210] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 0.370416] pci 0000:01:00.0: Boot video device
[ 0.370423] PCI: CLS 32 bytes, default 64
[ 0.370570] Unpacking initramfs...
[ 0.464290] Freeing initrd memory: 3236K (ffff88005fc97000 - ffff88005ffc0000)
[ 0.464451] microcode: AMD CPU family 0xf not supported
[ 0.464560] Scanning for low memory corruption every 60 seconds
[ 0.465261] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.479534] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.481578] zbud: loaded
[ 0.481785] VFS: Disk quotas dquot_6.5.2
[ 0.481858] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.482120] msgmni has been set to 2999
[ 0.482218] Key type big_key registered
[ 0.482413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.482461] io scheduler noop registered
[ 0.482463] io scheduler deadline registered (default)
[ 0.482512] io scheduler cfq registered
[ 0.482688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.482710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.482841] GHES: HEST is not enabled!
[ 0.482924] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.503487] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.524026] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.524343] Linux agpgart interface v0.103
[ 0.524401] rtc_cmos 00:01: RTC can wake from S4
[ 0.524562] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.524601] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[ 0.524617] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.524839] TCP: cubic registered
[ 0.524845] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.524849] NET: Registered protocol family 17
[ 0.525165] registered taskstats version 1
[ 0.525574] Magic number: 6:546:636
[ 0.525730] rtc_cmos 00:01: setting system clock to 2014-11-06 14:37:08 UTC (1415284628)
[ 0.525790] PM: Hibernation image not present or could not be loaded.
[ 0.529043] Freeing unused kernel memory: 1136K (ffffffff818d8000 - ffffffff819f4000)
[ 0.529053] Write protecting the kernel read-only data: 8192k
[ 0.534311] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
[ 0.536542] Freeing unused kernel memory: 408K (ffff88000179a000 - ffff880001800000)
[ 0.552237] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.560351] systemd-udevd[39]: starting version 216
[ 0.592052] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.592059] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.592875] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.596938] Floppy drive(s): fd0 is 1.44M
[ 0.614213] ACPI: bus type USB registered
[ 0.614265] usbcore: registered new interface driver usbfs
[ 0.614281] usbcore: registered new interface driver hub
[ 0.614967] FDC 0 is a post-1991 82077
[ 0.625659] SCSI subsystem initialized
[ 0.633113] libata version 3.00 loaded.
[ 0.633845] sata_nv 0000:00:0a.0: version 3.5
[ 0.634191] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
[ 0.634194] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
[ 0.635580] usbcore: registered new device driver usb
[ 0.636718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.637213] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.637384] ohci-pci: OHCI PCI platform driver
[ 0.637732] ehci-pci: EHCI PCI platform driver
[ 0.647435] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 0.647607] scsi0 : sata_nv
[ 0.652697] scsi1 : sata_nv
[ 0.652813] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 22
[ 0.652817] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 22
[ 0.653212] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.653223] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.653279] ohci-pci 0000:00:02.0: irq 22, io mem 0xfebfd000
[ 0.685200] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.700074] firewire_ohci 0000:02:0b.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 0.712351] hub 1-0:1.0: USB hub found
[ 0.712367] hub 1-0:1.0: 4 ports detected
[ 0.712766] ohci-pci 0000:00:02.1: OHCI PCI host controller
[ 0.712776] ohci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 0.712845] ohci-pci 0000:00:02.1: irq 21, io mem 0xfebfe000
[ 0.772298] hub 2-0:1.0: USB hub found
[ 0.772346] hub 2-0:1.0: 4 ports detected
[ 0.773212] ehci-pci 0000:00:02.2: EHCI Host Controller
[ 0.773228] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 0.773242] ehci-pci 0000:00:02.2: debug port 1
[ 0.773285] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[ 0.773315] ehci-pci 0000:00:02.2: irq 20, io mem 0xfebffc00
[ 0.790050] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 0.790381] hub 3-0:1.0: USB hub found
[ 0.790395] hub 3-0:1.0: 8 ports detected
[ 0.880074] hub 1-0:1.0: USB hub found
[ 0.880086] hub 1-0:1.0: 4 ports detected
[ 0.970117] hub 2-0:1.0: USB hub found
[ 0.970134] hub 2-0:1.0: 4 ports detected
[ 0.970356] pata_amd 0000:00:08.0: version 0.4.1
[ 0.973849] scsi2 : pata_amd
[ 0.974094] scsi3 : pata_amd
[ 0.974162] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.974165] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.980098] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.110030] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.190443] ata3.00: ATA-6: IC35L120AVV207-0, V24OA63A, max UDMA/100
[ 1.190446] ata3.00: 241254720 sectors, multi 16: LBA48
[ 1.190651] ata3.01: ATA-7: Hitachi HDT725032VLAT80, V54OA42A, max UDMA/133
[ 1.190654] ata3.01: 625142448 sectors, multi 16: LBA48
[ 1.190664] ata3: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c7c000) ACPI=0x3f01f (20:15:0x1f)
[ 1.190668] ata3: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc6c7c000) ACPI=0x7f01f (20:15:0x1f)
[ 1.200168] firewire_core 0000:02:0b.0: created device fw0: GUID 00e0180000b91545, S400
[ 1.250375] ata3.00: configured for UDMA/100
[ 1.265023] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1.265669] scsi4 : usb-storage 3-1:1.0
[ 1.265808] usbcore: registered new interface driver usb-storage
[ 1.290406] ata3.01: configured for UDMA/133
[ 1.310032] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.310260] scsi 2:0:0:0: Direct-Access ATA IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
[ 1.310565] scsi 2:0:1:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 1.380033] usb 3-2: new high-speed USB device number 3 using ehci-pci
[ 1.460029] tsc: Refined TSC clocksource calibration: 2210.758 MHz
[ 1.490267] ata4.00: ATAPI: PIONEER DVD-RW DVR-107D, 1.21, max UDMA/33
[ 1.490278] ata4: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc6c7c000) ACPI=0x701f (60:600:0x13)
[ 1.510193] ata4.00: configured for UDMA/33
[ 1.517016] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-107D 1.21 PQ: 0 ANSI: 5
[ 1.530745] sd 2:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.530827] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.530831] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.530860] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.530988] sd 2:0:0:0: [sda] 241254720 512-byte logical blocks: (123 GB/115 GiB)
[ 1.531050] sd 2:0:0:0: [sda] Write Protect is off
[ 1.531053] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.531145] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.536391] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.536403] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.536800] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.542997] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 1.543072] sdb: sdb1
[ 1.543976] scsi5 : usb-storage 3-2:1.0
[ 1.567204] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.575313] sda: sda1 sda2
[ 1.575840] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.660061] usb 3-3: new high-speed USB device number 4 using ehci-pci
[ 1.810652] hub 3-3:1.0: USB hub found
[ 1.810704] hub 3-3:1.0: 4 ports detected
[ 2.210057] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 2.261495] scsi 4:0:0:0: Direct-Access INTENSO USB 1100 PQ: 0 ANSI: 0 CCS
[ 2.263859] sd 4:0:0:0: [sdc] 15858688 512-byte logical blocks: (8.11 GB/7.56 GiB)
[ 2.264963] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.264968] sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 2.266088] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.266143] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.270838] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.270891] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.271726] sdc: sdc1 sdc2
[ 2.275974] sd 4:0:0:0: [sdc] No Caching mode page found
[ 2.276035] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 2.276094] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 2.446613] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.458243] usbcore: registered new interface driver usbhid
[ 2.458250] usbhid: USB HID core driver
[ 2.459628] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:02.1/usb2/2-2/2-2:1.0/0003:046D:C00C.0001/input/input1
[ 2.460237] hid-generic 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:02.1-2/input0
[ 2.465896] Switched to clocksource tsc
[ 2.514535] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.540869] scsi 5:0:0:0: Direct-Access Hama FlashPen 1.04 PQ: 0 ANSI: 0 CCS
[ 2.541837] sd 5:0:0:0: [sdd] 1003520 512-byte logical blocks: (513 MB/490 MiB)
[ 2.542457] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.542461] sd 5:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 2.543083] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.543138] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.546081] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.546131] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.546968] sdd:
[ 2.549206] sd 5:0:0:0: [sdd] No Caching mode page found
[ 2.549255] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 2.549305] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 3.215911] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 3.216179] systemd[1]: Detected architecture 'x86-64'.
[ 3.233071] systemd[1]: Set hostname to <db1arch>.
[ 4.451586] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.452340] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.452470] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.452530] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.453076] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.453109] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.453152] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.453167] systemd[1]: Starting Paths.
[ 4.453440] systemd[1]: Reached target Paths.
[ 4.453453] systemd[1]: Starting Encrypted Volumes.
[ 4.453723] systemd[1]: Reached target Encrypted Volumes.
[ 4.453743] systemd[1]: Expecting device dev-sda2.device...
[ 4.453935] systemd[1]: Expecting device dev-disk-by\x2duuid-1be23119\x2d5515\x2d4480\x2da559\x2d696105f9cee4.device...
[ 4.454136] systemd[1]: Expecting device dev-disk-by\x2duuid-385efd17\x2d3905\x2d4b8f\x2d8ec8\x2d9419a38cfcb0.device...
[ 4.454332] systemd[1]: Starting Root Slice.
[ 4.461699] systemd[1]: Created slice Root Slice.
[ 4.461738] systemd[1]: Starting User and Session Slice.
[ 4.462302] systemd[1]: Created slice User and Session Slice.
[ 4.462320] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.462665] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.462683] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.462993] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.463008] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.463307] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.463322] systemd[1]: Starting Journal Socket (/dev/log).
[ 4.463621] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.463637] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.463929] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.463954] systemd[1]: Starting udev Control Socket.
[ 4.464241] systemd[1]: Listening on udev Control Socket.
[ 4.464259] systemd[1]: Starting udev Kernel Socket.
[ 4.464547] systemd[1]: Listening on udev Kernel Socket.
[ 4.464579] systemd[1]: Starting Journal Socket.
[ 4.464874] systemd[1]: Listening on Journal Socket.
[ 4.464930] systemd[1]: Starting System Slice.
[ 4.465527] systemd[1]: Created slice System Slice.
[ 4.465560] systemd[1]: Started File System Check on Root Device.
[ 4.465574] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 4.466125] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 4.475871] systemd[1]: Mounting Temporary Directory...
[ 4.486514] systemd[1]: Starting system-getty.slice.
[ 4.487508] systemd[1]: Created slice system-getty.slice.
[ 4.487590] systemd[1]: Mounting Huge Pages File System...
[ 4.488820] systemd[1]: Starting udev Coldplug all Devices...
[ 4.491503] systemd[1]: Starting Setup Virtual Console...
[ 4.494613] systemd[1]: Mounting Debug File System...
[ 4.497220] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.557484] systemd[1]: Starting Set Up Additional Binary Formats...
[ 4.640820] systemd[1]: Started Load Kernel Modules.
[ 4.640879] systemd[1]: Starting Apply Kernel Variables...
[ 4.642456] systemd[1]: Mounting Configuration File System...
[ 4.643981] systemd[1]: Mounted FUSE Control File System.
[ 4.864249] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.865740] systemd[1]: Starting Journal Service...
[ 4.867779] systemd[1]: Started Journal Service.
[ 5.312956] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 5.624022] systemd-udevd[140]: starting version 216
[ 6.289020] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 6.289034] ACPI: Power Button [PWRB]
[ 6.289120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.289123] ACPI: Power Button [PWRF]
[ 6.352568] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[ 6.352584] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 6.352594] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[ 6.368450] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 6.486856] parport_pc 00:05: reported by Plug and Play ACPI
[ 6.486927] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.587129] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 904kHz
[ 6.688852] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 6.689198] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
[ 6.728214] random: nonblocking pool is initialized
[ 6.988022] mousedev: PS/2 mouse device common for all mice
[ 7.210562] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:11:d8:00:96:f1
[ 7.210572] forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
[ 7.210685] ACPI Warning: SystemIO range 0x0000000000005000-0x000000000000503f conflicts with OpRegion 0x0000000000005000-0x0000000000005004 (\_SB_.PCI0.SMBS.SMRG) (20131218/utaddress-258)
[ 7.210694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.210750] i2c i2c-0: nForce2 SMBus adapter at 0x5040
[ 7.210837] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.304777] MCE: In-kernel MCE decoding enabled.
[ 7.310354] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 7.310416] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[ 7.388088] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[ 7.482978] ppdev: user-space parallel port driver
[ 7.492121] EDAC MC: Ver: 3.0.0
[ 7.682441] AMD64 EDAC driver v3.4.0
[ 7.720053] intel8x0_measure_ac97_clock: measured 50279 usecs (2472 samples)
[ 7.720064] intel8x0: clocking to 46862
[ 7.720952] EDAC amd64: DRAM ECC enabled.
[ 7.720961] EDAC amd64: K8 revE or earlier detected (node 0).
[ 7.721024] EDAC amd64: CS0: Double data rate SDRAM
[ 7.721026] EDAC amd64: CS1: Double data rate SDRAM
[ 7.721028] EDAC amd64: CS2: Double data rate SDRAM
[ 7.721029] EDAC amd64: CS3: Double data rate SDRAM
[ 7.721031] EDAC amd64: CS4: Double data rate SDRAM
[ 7.721032] EDAC amd64: CS5: Double data rate SDRAM
[ 7.721371] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
[ 7.721411] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[ 7.819219] systemd-udevd[148]: renamed network interface eth0 to enp0s5
[ 8.800850] nvidia: module license 'NVIDIA' taints kernel.
[ 8.800863] Disabling lock debugging due to kernel taint
[ 8.878778] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
[ 8.878854] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 8.879632] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.123 Wed Jul 2 10:59:22 PDT 2014
[ 9.251351] Adding 2137224k swap on /dev/sda2. Priority:-1 extents:1 across:2137224k FS
[ 9.501409] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 10.518296] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.788573] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.527802] systemd-journald[119]: Received request to flush runtime journal from PID 1
glxinfo | grep OpenGL
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 7600 GT/AGP/SSE2
OpenGL version string: 2.1.2 NVIDIA 304.123
OpenGL shading language version string: 1.20 NVIDIA via Cg compiler
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 2.0 NVIDIA 304.123 304.123
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.00
OpenGL ES profile extensions:
lspci -v
00:00.0 Host bridge: NVIDIA Corporation nForce3 250Gb Host Bridge (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [c0] AGP version 3.0
Kernel driver in use: agpgart-amd64
Kernel modules: amd64_agp
00:01.0 ISA bridge: NVIDIA Corporation nForce3 250Gb LPC Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
00:01.1 SMBus: NVIDIA Corporation nForce 250Gb PCI System Management (rev a1)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: 66MHz, fast devsel
I/O ports at 5080 [size=32]
I/O ports at 5000 [size=64]
I/O ports at 5040 [size=64]
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus
Kernel modules: i2c_nforce2
00:02.0 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.1 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.2 USB controller: NVIDIA Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:05.0 Bridge: NVIDIA Corporation CK8S Ethernet Controller (rev a2)
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
I/O ports at ec00 [size=8]
Capabilities: [44] Power Management version 2
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:06.0 Multimedia audio controller: NVIDIA Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 812a
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
I/O ports at e800 [size=256]
I/O ports at e400 [size=128]
Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0
00:08.0 IDE interface: NVIDIA Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable)
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable)
I/O ports at ffa0 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: pata_amd
Kernel modules: pata_amd, pata_acpi, ata_generic
00:0a.0 IDE interface: NVIDIA Corporation nForce3 Serial ATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. K8N-E
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at c800 [size=16]
I/O ports at c400 [size=128]
Capabilities: [44] Power Management version 2
Kernel driver in use: sata_nv
Kernel modules: sata_nv, pata_acpi, ata_generic
00:0b.0 PCI bridge: NVIDIA Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: ba800000-da7fffff
Kernel modules: shpchp
00:0e.0 PCI bridge: NVIDIA Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fea00000-feafffff
Kernel modules: shpchp
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
Kernel driver in use: amd64_edac
Kernel modules: amd64_edac_mod
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce 7600 GT] (rev a2) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device 0401
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (32-bit, prefetchable) [size=256M]
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8V/A8N/P4P800 series motherboard
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at bc00 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
running browsers from a uterm shows only these console messages (nothing else):
firefox http://dennisbusch.de/software/refugeel … _rlGL.html
(process:489): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
google-chrome-stable http://dennisbusch.de/software/refugeel … _rlGL.html
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
google-chrome-stable --ignore-gpu-blacklist http://dennisbusch.de/software/refugeel … _rlGL.html
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
NVIDIA: could not open the device file /dev/nvidia0 (Operation not permitted).
chromium shows the same messages as google-chrome-stable does.
stat /dev/nvidia0
File: /dev/nvidia0
Size: 0 Blocks: 0 IO Block: 4096 character special file
Device: 5h/5d Inode: 10741 Links: 1 Device type: c3,0
Access: (0666/crw-rw-rw-) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2014-11-06 15:42:55.105702689 +0100
Modify: 2014-11-06 15:42:55.105702689 +0100
Change: 2014-11-06 15:42:55.105702689 +0100
Birth: -
That's all I know. Any ideas?Still trying...but pretty much stumbling around in the dark here.
cat /proc/driver/nvidia/agp/host-bridge
Host Bridge: PCI device 10de:00e1
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0x1f00421b:0x00000312
cat /proc/driver/nvidia/agp/gpu
Fast Writes: Supported
SBA: Supported
AGP Rates: 8x 4x
Registers: 0xff000e1b:0x1f004312
cat /proc/driver/nvidia/agp/status
Status: Enabled
Driver: AGPGART
AGP Rate: 8x
Fast Writes: Disabled
SBA: Enabled
Digging around the web I found how to enable fastwrites and did so by
creating a file /etc/modprobe.d/nvidia.conf
with this content:
options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1
after reboot, startx
cat /proc/driver/nvidia/agp/status
Status: Enabled
Driver: AGPGART
AGP Rate: 8x
Fast Writes: Enabled
SBA: Enabled
The problem of sluggish webgl performance persists though and the
browsers as described in the OP are still giving the same messages.
Here is some more data, maybe it's relevant...
cat /proc/driver/nvidia/params
EnableVia4x: 0
EnableALiAGP: 0
NvAGP: 3
ReqAGPRate: 15
EnableAGPSBA: 1
EnableAGPFW: 1
Mobile: 4294967295
ResmanDebugLevel: 4294967295
RmLogonRC: 1
ModifyDeviceFiles: 1
DeviceFileUID: 0
DeviceFileGID: 0
DeviceFileMode: 438
RemapLimit: 0
UpdateMemoryTypes: 4294967295
InitializeSystemMemoryAllocations: 1
UseVBios: 1
RMEdgeIntrCheck: 1
UsePageAttributeTable: 4294967295
EnableMSI: 0
MapRegistersEarly: 0
RegisterForACPIEvents: 1
RegistryDwords: ""
RmMsg: "" -
Posting to G/L accounts with open item management not permitted Fagl_post
Dear Expert,
When i run the foreign cur rev. through FAGL_FC_VAL then system is not post the currency rev on open item on GL account. It showing subject message and also show below mesaage:-
Message no. FAGL_POST_SERVICE012
Diagnosis
You use GL account 210012 in company code 1000 with open item management. However, posting are not permitted G/L accounts in individual ledger with open item management.
Please advice on this issue.
Thanks & Regards,
PankajHello Pankaj,
Is your adjustment account was defiined as OI management. if yes, then t is generally not permitted to use the O/I managed account as an djustment account. The adjustment account is the same as O/I
managed GL account, so the error message FAGL_POST_SERVICE012 is issued. This is justified because open items must be made valid for ALL ledgers in the client but FAGL_FC_TRANS posts ledger specific posting by having ledger group in the document header - Ledger Grp 0L.
The best solution is to assign non-O/I managed account as an adjustment account, and this is the 'standard' solution.Please also check note 884639.
Best Regards,
Gladys xing -
Account type M and G/L account with open item management not permitted
Hi,
I am getting the following error while applying VL02N (PGI) is "Account type M and G/L account with open item management not permitted". Before I got an error like posting period and I have closed those posting periods 2008/08 and 2008/07. Now I am getting this error.
Please provide the solutions to overcome this and I want to execute the full transaction.
Thanks in ADVANCE.
KishoreHi Kishore,
Please check these threads
Account type M and G/L account with open item management not permitted
Re: Account type M& GL with open item managment not permitted error
Posting to G/L accounts with open item management are not permitted
Hope this would help you.
Good luck
Narin -
Error : Reading from Aggregation Level not permitted
Hello Gurus,
Could somebody please give some help or advice regarding this?
I have a multiprovider on a regular cube and an aggregation level, for some reason the multicube gives me the following error message when I try to display data using listcube.
Reading from Aggregation Level is not permitted
Message no. RSPLS801
Also the Query on the multicube does not display data for any of the KF's in the Agg Level but when I create a query on the Agg level itself it is fine.
Any suggestions?
Thanks.
Swaroop.
Edited by: Swaroop Chandra on Dec 10, 2009 7:29 PMHi,
transaction LISTCUBE does not support all InfoProviders, e.g. aggregation level are not supported. LISTCUBE is a 'low level' to read data from the BW persistence layer, e.g. InfoCubes. Since aggregation level always read transaction data via the so called planning buffer and the planning buffer technically is a special OLAP query LISTCUBE does not support aggregation level.
Regards,
Gregor
Maybe you are looking for
-
Sale order TECO status maintain
Hi SAP Buddy can any one tell me .. how the restriction can be customized in SAP for an sale order.. Condition :: Untill unless Production order of a sale order line item ( of MTO scenerio) is not made TECO we were not able to TECO sale order line IT
-
Parse xml cannot handle first line of " ?xml version="1.0" encoding="UTF-16
Hi, I'm trying to use applescript to parse a few element values from an xml file. It only works if the xml file does NOT have an "<?xml...?>" entry on the first line. The production xml files I use will always have the <?xml...?> entry on the first l
-
Do Window Vista Dirvers exist for Apple Cinema Displays ?
I am using a 23 inch Apple Cinema Display with a windows Vista box and noticed it is using a generic HD driver. Should I have a diver specific to the ACD? Do any exist? Thanks Power Book Mac OS X (10.4.9) 23 inch ACD
-
Creating Threads : New thread doesn't run( )
Hello ! Can anyone please check the error in this code. It does not start the new thread. God bless you. NADEEM. // Create a second thread class NewThread implements Runnable { Thread t ; NewThread() { try { t = new Thread(this.t , "New Thre
-
TS3716 how do i resolve an r6034 error with my ipod classic
My ipod was connecting fine with my desktop pc last night but today it won't connect. I am getting an error C:\programfiles(x86)\itunes\itunes.exe Then I get another message saying r6034 has occurred. Anyone any ideas what the problemm is and how to