Organize by Thread message counts gone?

OK, I must be missing a pref somewhere. Tiger's Mail.app would show me the number of messages in a thread if I chose 'Organize by thread'. That count is gone under Leopard. Is there a pref somewhere to turn it back on?

Answering my own question: It's the width of the '•' (read/unread) column, which somehow got reset on my machine.

Similar Messages

My iPad Air was getting messages. I was able to send messages. Now my message thread is almost gone but I can't send or receive messages anymore

My iPad Air was getting messages. I was able to send messages. Now my message thread is almost gone but I can't send or receive messages anymore

Kamboss wrote:
... Now my message thread is almost gone ...
What exactly does that mean?

Email failure - The following organization rejected your message

Hi,
We are getting failures in receiving emails from two client specifically (email from other clients are received successfully).
I can confirm that our SMTP server is configured NOT to check for reverse DNS.
I am attaching below the notification message from one of the failed emails.
Delivery has failed to these recipients or groups:
[email protected]
A problem occurred during the delivery of this message to this e-mail address. Try sending this message again. If the problem continues, please contact your helpdesk.
The following organization rejected your message: xxxxxxxxx.com.
Diagnostic information for administrators:
Generating server: server519.appriver.com
[email protected]
xxxxxxxxx.com #<xxxxxxxxx.com #4.0.0 smtp;connection with xxxxxxxxx.com is broken> #SMTP#
Original message headers:
Received: by server519.appriver.com (CommuniGate Pro PIPE 5.4.8)
with PIPE id 517414458; Wed, 12 Mar 2014 06:10:06 -0500
Received: from [4.28.183.90] (HELO hullmail.hullco.com)
by server519.appriver.com (CommuniGate Pro SMTP 5.4.8)
with ESMTPS id 517414455 for [email protected]; Wed, 12 Mar 2014 06:10:01 -0500
Received: from ATL-EXMB03.HULL.COM ([2002:c0bd:6d9a::c0bd:6d9a]) by
atl-exht04.HULL.COM ([2002:c0bd:6d8c::c0bd:6d8c]) with mapi id
14.02.0298.004; Wed, 12 Mar 2014 07:10:00 -0400
From: Joe Failla <[email protected]>
To: "'[email protected]'" <[email protected]>
Subject: Test Submission
Thread-Topic: Test Submission
Thread-Index: Ac8945alas54Yp+WQ4eldDiAOdcpKA==
Date: Wed, 12 Mar 2014 11:10:00 +0000
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator:
x-originating-ip: [192.189.109.5]
Content-Type: text/plain
MIME-Version: 1.0
X-Note-AR-ScanTimeLocal: 3/12/2014 6:10:01 AM
X-Policy: hullco.com - hullco.com
X-Primary: [email protected]
X-Note: This Email was scanned by AppRiver SecureTide
X-Note: VCH-CT/SI:0-2630/SG:1 3/12/2014 6:09:20 AM
X-Virus-Scan: V-X0
X-Note: Spam Tests Failed:
X-Country-Path: ->UNITED STATES->UNITED STATES
X-Note-Sending-IP: 4.28.183.90
X-Note-Reverse-DNS:
X-Note-Return-Path: [email protected]
X-Note: User Rule Hits:
X-Note: Global Rule Hits: G327 G328 G329 G330 G334 G335 G445
X-Note: Encrypt Rule Hits:
X-Note: Mail Class: VALID
Any assistance will be gratefully received.
Regards,
Vishakha

Hi Vishakha,
From the NDR information, the email was scanned by AppRiver SecureTide and then Spam Tests Failed. I think the issue is related to AppRiver SecureTide. If possible, I recommend you disable the AppRiver SecureTide temporarily and check the result.
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Organize By Thread not working in iOS 5 Mail

Since my iOS 5 update, viewing mail messages by thread no longer works for me (both on an iPhone 4s and an iPad 2). This happens with an imap account. (I don't know whether POP accounts are affected.)
It's easy to test this:
Send yourself a mail message with subject "Test".
Reply to the message, so there are now two messages with subject "Test" and "Re: Test".
Check that the "Organize By Thread" option for mail is enabled on the iOS 5 device.
Look at your inbox.
On my iPhone and iPad, I see the two messages displayed as separate items but, with Mac Mail on OS X, they are shown as a single entry.
Is anyone else seeing this or am I the only one? Any known work-around?
Thanks,
Michi.

Actually I also see the opposite as you say, i.e. messages that should be in the same thread are shown as separate threads, even though they are properly grouped in Mac Mail on OS X.
Thank you for having submitted a bug report to Apple, and for letting me know that Apple has since acknowledged it as a known problem and is working on it.
Good to know that I'm not alone here - obviously others are also faced with the same issue, though one would not have known based on the short... thread here!
(Eeeeek, I take it back! I just saw in Mac Mail on OS X that some messages aren't properly grouped, either. Sigh...)
Message was edited by: ecc.sd

How to get Uniform distributed queue message counts with help of JMX

Hi,
Is there any way to get given queue message count, pending message counts using JMX. I can get all queue names and counts using JMX... after that i have to show only selected queue details.
Thanks,
-Som

Hi,
Following is the WLS snippet from an upcoming WLS JMS message management white paper that you can use to get the message statistics for a given destination.
With appropriate command line parameters, this script can be used to poll and dump the statistics of any destination on a specified interval.
Note that the WLST uses JMX API under the cover, so you can easily convert this into a pure JMX java program.
Hope this helps.
Kats
WebLogic JMS Message Statistics Script for weblogic.WLST
This script can be used for dumping message statistics of a given JMS Destination.
Based on the arguments, the script creates can print out message statistics
Usage: java weblogic.WLST msg_statistics.py [options]
Options:
username=...           username to connect to WebLogic Server       - defaults to "weblogic"
password=...           password to connect to WebLogic Server       - defaults to "weblogic"
url=...                Provider URL of the Administration Server    - defaults to "t3://localhost:7001"
wlsServerName=...      WebLogic Server Name                         - defaults to "examplesServer"
jmsServerName=...      JMS Server Name that hosts the destination   - defaults to "examplesJMSServer"
jmsModuleName=...      JMS Module Name that defines the destination - defaults to "examples-jms"
jmsDestinationName=... JMS Destination name to get the statistics   - defaults to "exampleQueue"
pollingIntervalInSeconds=... Time interval between statistics dump - defaults to "60 secs"
redirectStdout=...     File name to redirect the stdout of WLST     - defaults to no redirect and the results wil be printed out to stdout.
help                   Prints out this usage help
Note that all the defaults are set based WebLogic Examples domain that is part of WebLogic Server installation.
The "examples" server can be started from "C:/Oracle/Middleware/wlserver_10.3/samples/domains/wl_server" using startWebLogic.sh
To try this script OOTB, start the "examples" server and run the JMS sample as described below.
cd :/Oracle/Middleware/wlserver_10.3/samples/domains/wl_server/bin
. ./setDomainEnv.sh
cd $WL_HOME/samples/server/examples/src/examples/jms/queue
javac -d . *.java
export CLASSPATH=".;$CLASSPATH"
java examples.jms.queue.QueueSend t3://localhost:7001
Follow the prompts to populate the queue
Examples:
msg_statistics.py - Dump the message statistics of the exampleQueue for every 1 min
msg_statistics.py user=weblogic pass=weblogic url=t3://localhost:7001
                      wlsServerName=examplesServer jmsServerName=examplesJMSServer
                jmsModuleName=examples-jms jmsDestinationName=exampleQueue
                pollingIntervalInSeconds=30
For more details on JMS Message Management using WLST, see "WebLogic JMS Message Management In a Nutshell" whitepaper.
from weblogic.jms.extensions import JMSMessageInfo
from weblogic.messaging.kernel import Cursor
from javax.jms import TextMessage
from javax.jms import DeliveryMode
from java.io import ByteArrayOutputStream
from java.io import StringBufferInputStream
from java.util import Properties
from java.util import Date
from java.lang import *
import jarray
import sys
# shows_messages() definition
def dump_statistics(wlsServerName, jmsServerName, jmsModuleName, jmsDestinationName, pollingIntervalInSeconds):
pollingIntervalInMillis = long(pollingIntervalInSeconds) * 1000L
domainRuntime()
cd ('ServerRuntimes')
spath = wlsServerName + "/JMSRuntime/" + wlsServerName +".jms"
cd (spath)
fullDestName=jmsServerName+'/Destinations/'+jmsModuleName +'!'+jmsDestinationName
cdPathForDestName='JMSServers/'+ fullDestName
cd (cdPathForDestName)
while 1:
    print "========================================================================================================================"
    print "Messages     Messages      Messages      Messages      Bytes        Bytes        Bytes           Bytes    "
    print "Current      Pending      High          Received      Current      Pending      High           Received "
    print "Count         Count         Count         Count         Count        Count        Count           Count    "
    print "========================================================================================================================"
    s = "%8d     %8d     %8d     %8d     %8d     %8d     %8d     %d" % (cmo.getMessagesCurrentCount(), cmo.getMessagesPendingCount(), cmo.getMessagesHighCount(), cmo.getMessagesReceivedCount(), cmo.getBytesCurrentCount(), cmo.getBytesPendingCount(), cmo.getBytesHighCount(), cmo.getBytesReceivedCount())
    print s
    print ''
    Thread.sleep(long(pollingIntervalInMillis))
# Function to handle script arguments of the variety 'n=v', where
# arguments are placed into a dictionary of nv pairs and returned
# to the caller
def argsToDict(args):
d = {}
for arg in args:
    #print "arg: " + arg
    pair = arg.split('=', 1)
    #print "pair: " + str(pair)
    if len(pair) == 2:
      # binary argument, store as key pair
      key = pair[0]
      val = pair[1]
      d[key] = val
    else:
      # Unary argument, story with empty (non-null) key
      d[arg] = ''
print "Arguments: " + str(d)
return d
# Returns the value found in the provided map, at the location
# specified by 'key'; if no entry exists in the map for 'key',
# the provided default is returned.
def getValue(dict, key, default=None):
ret = default
if dict is not None:
    try:
      ret=dict[key]
    except KeyError:
      pass
return ret
# Connect to the target server specified in the provide args
def connectIfNecessary(argsDict=None):
# connect if necessary
if connected == "false":
    user=getValue(argsDict, "user", "weblogic")
    passwd=getValue(argsDict, "pass", "weblogic")
    url=getValue(argsDict, "url", "t3://localhost:7001")
    print "Connecting with [" + user + "," + passwd + "," + url + "]"
    connect(user,passwd,url)
# Retrieve a positional argument if it exists; if not,
# the provided default is returned.
# Params:
# pos   The integer location in sys.argv of the parameter
# default The default value to return if the parameter does not exist
# returns the value at sys.argv[pos], or the provided default if necesssary
def getPositionalArgument(pos, default):
value=None
try:
    value=sys.argv[pos]
except:
    value=default
return value
# Main
argsDict = argsToDict(sys.argv)
redirectOutputFileName = getValue(argsDict, "redirectStdout")
if redirectOutputFileName is None:
pass
else:
redirect(redirectOutputFileName, 'false')
print "The output from this program gets written into file " + redirectOutputFileName
sys.stdout = open(redirectOutputFileName, "w")
isHelp = getValue(argsDict, "help")
if isHelp is None:
pass
else:
print __doc__
exit()
connectIfNecessary(argsDict)
wlsServerName = getValue(argsDict, "wlsServerName", "examplesServer")
jmsServerName = getValue(argsDict, "jmsServerName", "examplesJMSServer")
jmsModuleName = getValue(argsDict, "jmsModuleName", "examples-jms")
jmsDestinationName = getValue(argsDict, "jmsDestinationName", "exampleQueue")
pollingIntervalInSeconds = getValue(argsDict, "pollingIntervalInSeconds", "60")
dump_statistics(wlsServerName, jmsServerName, jmsModuleName, jmsDestinationName, pollingIntervalInSeconds)
disconnect()
print 'End of script ...'
exit()

Message count incorrect

I'm using 10.8.2 on an iMac, together with Fastmail as an email provider. The Get Account Info function in mail shows message counts in my IMAP mail boxes that match Fastmail's various webmail interfaces. The actual messages displayed don't reach these totals, however. They're always 5-20 messages short, even with all conversation features turned off. Postbox 3.06 and Outlook 2011 don't have these issues. Is this some sort of known Mail issue, and some esoteric problem with Fastmail? Any hints would be welcome. I don't much care for Outlook, but I also don't want to accidentally lose some email I'll need later.

Mine has an unread count of 6, and it's really annoying. This would definitely be my favorite new feature of the new Mail by far if only it worked correctly.
I've been using a "new mail" smart mailbox for some time now, so that doesn't take care of it. I've also deleted all my RSS feeds (use Google Reader anyway), gone through every mailbox and marked everything as read, and restarted Mail several times. The weird thing is that this happened before (unread count was 2), went away for a few days, and now it's doing it again. Unless there are some mail messages getting diverted somewhere else that aren't showing up in Mail, I'm not quite sure what the problem is, but it really is mighty distracting.
Message was edited by: nosugrefneb

Unread message count is wrong in Mail and Dock

Just last week I noticed that both my Email Inbox & Mail Dock Icon is showing an incorrect unread message count on both my MacBook & iMac. I am using a Microsoft Exchange Hosted account (Office 365) and it is the only email account tied to both of my Macs. My iPhone shows the correct unread message count as well as Outlook Web Access, and on a seperate windows-based computer, Outlook is showing the correct unread message count of 3. Both Mac systems are using OS X 10.7.3 and I have never experienced this issue before.
The MacBook is showing 39 unread messages, and the iMac is showing 16, in actuality there are 3 unread messages. If I create a smart mailbox that shows only unread messages - it shows up with the correct number (3), when I sort by "Unread Messages" for Inbox, it only shows that I have three unread messages.
I have rebuilt the inbox, I have deleted the email account from the computer, restarted the computer and then readded it, all it did was bring the unread message count from 19 to 16 on my iMac (still - it should be 3).
I have also gone to Mail -> Preferences -> General and verified that Show Dock Unread County is set to "Inbox" but oddly enough, when I click "All Mailboxes" the unread count on the Dock changes to 3.
Is there a file I can delete to reset that unread message count? I feel like I've done everything that's suggested to no avail.
Thanks!

There is a small glitch, and you guys are close.
In Mail Preferences under General, there is the option for:
Dock Unread Count --
Your choices in the dropdown are either:
None
Inbox Only
All Boxes
The problem is that I've often seen the Inbox Only is checkmarked, and stays as checkmarked, even when you last told it to use either None or All Boxes.
It is possible that Alconic see's Inboxes Only checkmarked, when in fact it's All mailboxes that are set to be showing.
Try to re-check "Inbox only" even though it's already checked and see what happens...

The following organization rejected your message: ESMTP.

Using SBS 2008 with Exchange 2007. I am getting this message from 2 different organizations, but only 2. All other emails go out fine. The bounce back occurs immediately, almost as if it does not even go out. This is a new problem that just surfaced. Any help would be appreciated.
Here is the detail of the error:
Delivery has failed to these recipients or distribution lists:
William O'Dell
An error occurred while trying to deliver this message to the recipient's e-mail address. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or provide the following diagnostic text to your system administrator.
The following organization rejected your message: ESMTP.
Sent by Microsoft Exchange Server 2007
Diagnostic information for administrators:
Generating server: PASVR.SynACT2.local
[email protected]
ESMTP #554 Transaction Failed Spam Message not queued. ##
Original message headers:
Received: from PASVR.SynACT2.local ([fe80::d93:c007:477c:9952]) by
PASVR.SynACT2.local ([fe80::d93:c007:477c:9952%10]) with mapi; Tue, 5 May
2009 11:34:43 -0400
From: Ken Compter <[email protected]>
To: William O'Dell <[email protected]>
Date: Tue, 5 May 2009 11:34:41 -0400
Subject: Sales Process Modeling Update
Thread-Topic: Sales Process Modeling Update
Thread-Index: AcnNlwIyBChaPXVdTSmQFWv+VlXTxw==
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator:
acceptlanguage: en-US
Content-Type: multipart/related;
            boundary="_007_F3D2E271BE29C3488DA401393DC0099B23F8498B52PASVRSynACT2l_";
            type="multipart/alternative"
MIME-Version: 1.0

Delivery has failed to these recipients or distribution lists:
[email protected]
An error occurred while trying to deliver this message to the recipient's e-mail address. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message, or provide the following diagnostic text to your system administrator.
Diagnostic information for administrators:
Generating server: spamkiller.xxxxxx.com
[email protected]
#< #5.0.0 X-Spam-&-Virus-Firewall; host scoular.com.inbound15.mxlogic.net[208.65.144.12] said: 553 mailbox
[email protected] is restricted (Mode: normal) (in reply to RCPT TO command)> #SMTP#
Original message headers:
X-ASG-Debug-ID: 1335282850-024e85090bb090b0001-eby5OG
Received: from xxxxx.xxx.xx ([192.192.xxx.xxx.xxx]) by xxxxx
with ESMTP id M0Eaq5damCASV5SJ for <[email protected]>; Tue, 24 Apr 2012
10:54:10 -0500 (CDT)
X-Barracuda-Envelope-From: [email protected]
Received: from xxxxx.xxx.xx ([192.192.xxx.xxx.xxx]) by xxxxx
([192.168.10.5]) with mapi; Tue, 24 Apr 2012 10:54:10 -0500
From: "Patel, Arpit" <[email protected]>
X-Barracuda-BBL-IP: 192.xxx.xxx.xxx
X-Barracuda-RBL-IP: 192.xxx.xxx.xxx
To: "'[email protected]'" <[email protected]>
Date: Tue, 24 Apr 2012 10:54:09 -0500
Subject: test
Thread-Topic: test
X-ASG-Orig-Subj: test
Thread-Index: Ac0iMnxtNM4J+DwnSx66abOpTtjmuA==
Message-ID:
FBD890831CAF5048B00FFDDD02D55A640C04310C34@xxxxx
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
acceptlanguage: en-US
Content-Type: multipart/alternative;
boundary="_000_FBD890831CAF5048B00FFDDD02D55A640C04310C34xxxx_"
MIME-Version: 1.0
X-Barracuda-Connect: UNKNOWN[192.xx.xx.xxx
X-Barracuda-Start-Time: 1335282850
X-Barracuda-URL: http://192.xx.xx.xx:000/cgi-mod/mark.cgi
X-Virus-Scanned: by bsmtpd at rlcx.com
X-Barracuda-Spam-Score: 0.00
X-Barracuda-Spam-Status: No, SCORE=0.00 using global scores of TAG_LEVEL=1000.0 QUARANTINE_LEVEL=1000.0 KILL_LEVEL=9.0 tests=HTML_MESSAGE
X-Barracuda-Spam-Report: Code version 3.2, rules version 3.2.2.95041
Rule breakdown below
pts rule name              description
0.00 HTML_MESSAGE           BODY: HTML included in message
Can someone help me? I am having a same issue and not sure what to look for.
Can someone explain how to check this stuff and where?
> Find out which DNSBL lists your IP address.
>
>sir now my Q. is that, where I can found my DNSBL oprator.
That information should be in the text of the 5xx or 4xx status code
returned from the server that rejected your e-mail.
Thanks again for looking.
Arpit Patel

The destination message count limit (maxNumMsgs) of 100000 has been reached

So I seem to be getting this error when trying to send JMS messages in Glassfish to a topic after our application has been up and running for about 18 hours. We're using a topic, so a message is being published to the topic and one of two things should be happening if I understand things correctly: 1) Subscribers on the topic should receive a copy of the message, then the message is deleted from the topic or 2) there are no subscribers so the message doesn't get stored in the topic. However, based on the stack trace below, it is quite clear that the topic queueing up messages. The messages we send are non-persistent and the subscribers are non-durable so if no one is listening to the topic there's no reason to queue up the message. And if someone is listening, when the message is sent to the subscriber then it should be removed from the topic. Maybe I'm not understanding how topics work.
Here's the stack trace:
[#|2012-07-18T08:47:58.976-0400|SEVERE|oracle-glassfish3.1.2|javax.jms.Session.mqjmsra|_ThreadID=47;_ThreadName=Thread-2;|MQJMSRA_DS4001: JMSServiceException on send message:sendMessage: Sending message failed. Connection ID: 5710626523942584577|#]
[#|2012-07-18T08:47:58.976-0400|INFO|oracle-glassfish3.1.2|javax.enterprise.system.std.com.sun.enterprise.server.logging|_ThreadID=47;_ThreadName=Thread-2;|2012-07-18 08:47:58,976 [Session5710626523942588672] ERROR com.foo.ejb.session.RealtimeCacheEJB$RealtimeCacheResourceChangeListener.onMessage(RealtimeCacheEJB.java:328): Failed to resend the resource change message
javax.jms.JMSException: MQJMSRA_DS4001: JMSServiceException on send message:sendMessage: Sending message failed. Connection ID: 5710626523942584577
                at com.sun.messaging.jms.ra.DirectSession._sendMessage(DirectSession.java:1844)
                at com.sun.messaging.jms.ra.DirectProducer._send(DirectProducer.java:1085)
                at com.sun.messaging.jms.ra.DirectProducer.send(DirectProducer.java:453)
                at com.foo.jms.JMSPublisher.send(JMSPublisher.java:81)
                at com.foo.ejb.session.RealtimeCacheEJB$RealtimeCacheResourceChangeListener.onMessage(RealtimeCacheEJB.java:324)
                at com.sun.messaging.jms.ra.DirectSession._deliverMessage(DirectSession.java:1895)
                at com.sun.messaging.jms.ra.DirectConsumer.deliver(DirectConsumer.java:369)
                at com.sun.messaging.jmq.jmsserver.service.imq.SessionListener.process(IMQDirectService.java:2928)
                at com.sun.messaging.jmq.jmsserver.service.imq.SessionListener.run(IMQDirectService.java:2866)
                at java.lang.Thread.run(Thread.java:662)
Caused by: com.sun.messaging.jmq.jmsservice.JMSServiceException: sendMessage: Sending message failed. Connection ID: 5710626523942584577
                at com.sun.messaging.jmq.jmsserver.service.imq.IMQDirectService.sendMessage(IMQDirectService.java:1955)
                at com.sun.messaging.jms.ra.DirectSession._sendMessage(DirectSession.java:1839)
                ... 9 more
Caused by: com.sun.messaging.jmq.jmsserver.util.BrokerException: [B4120]: Can not add message 800910-192.168.21.136(da:25:a2:a:c8:c6)-1-1342615678976 to destination fooRealtimeChange [Topic]. The destination message count limit (maxNumMsgs) of 100000 has been reached.
                at com.sun.messaging.jmq.jmsserver.core.Destination.queueMessage(Destination.java:3202)
                at com.sun.messaging.jmq.jmsserver.core.Destination.queueMessage(Destination.java:3087)
                at com.sun.messaging.jmq.jmsserver.core.Topic.queueMessage(Topic.java:211)
                at com.sun.messaging.jmq.jmsserver.data.handlers.DataHandler.queueMessage(DataHandler.java:440)
                at com.sun.messaging.jmq.jmsserver.data.protocol.ProtocolImpl.processMessage(ProtocolImpl.java:939)
                at com.sun.messaging.jmq.jmsserver.service.imq.IMQDirectService.sendMessage(IMQDirectService.java:1948)
                ... 10 more
Caused by: com.sun.messaging.jmq.util.lists.OutOfLimitsException: Capacity Exceeded was 100001 expected 100000
                at com.sun.messaging.jmq.util.lists.SimpleNFLHashMap.put(SimpleNFLHashMap.java:359)
                at com.sun.messaging.jmq.util.lists.SimpleNFLHashMap.put(SimpleNFLHashMap.java:291)
                at com.sun.messaging.jmq.jmsserver.core.Destination.putMessage(Destination.java:3271)
                at com.sun.messaging.jmq.jmsserver.core.Destination.queueMessage(Destination.java:3137)
                ... 15 more
|#]

If no consumer on the Topic, the message will not be queued to the destination unless it's sent in a transaction in which case it will be cleaned up when the transaction completes if no consumer at time of transaction commit in GlassFish MQ. You can run 'imqcmd list dst', 'imqcmd query dst', 'imqcmd list dur' and 'imqcmd list txn' to check if any other consumer exist on the Topic that caused the messages get queued or held due to incompleted transaction. If there is a consumer client, make sure it's consuming messages and acknowledge messages if using client ack session.

HT3529 My text message count says 2, but I have no unread messages. How do I fix this?

My text message count says 2, but I have no unread messages. How do I fix this?

Ok! I went to Settings then to Messages and then turned off iMessaging and turned off everything I could in the Messaging area and then went to the Home Screen and those pesky unread messages were gone! So I went back into settings and turned everything back on, solved my problem.
The only thing I had to do was resign in for iMessaging.

Organize by Thread?

So I was looking through the mail options and saw this
http://imgur.com/Sqvp2.png
Can anyone explain to me what "Organize by Thread" is for?
Thanks.

"If you organize messages by thread, related messages appear as a single entry in the mailbox. Message threads have a number next to the right arrow, showing the number of messages in the thread. A blue dot indicates that one or more messages in the thread are unread. The message displayed is the oldest unread message, or the most recent message if all the messages are read."
In other words, all the messages from one person will show as only one entry in your inbox with a number to indicate the number of messages from that person.
See page 74 of iPhone iOS4 User Guide for a picture.

Mail: Organize by Thread

As rudimentary as it was I took advantage of the Organize by Thread feature of Snow Leopard, which seems to be missing in Lion. I get a lot of website generated emails with the same subject, which was easy to organize in Snow Leopard. In SL I would have one thread that had hundreds of emails (and I do mean hundreds) in Lion I now have hundreds of threads which I have to manage individually. Is there any way to get back to organize by thread? I've already enabled classic view but it doesn't appear to help.
Thanks,
-John

No help here, but I need to commiserate.
If I understand correctly, I am having the same problem:
Messages with the same subject, but with different senders, are not consolidated into a single thread/conversation.
I also receive emails via a web form, where each message contains the same subject. In 10.6, these messages were ALL listed as a single thread that could be expanded/collapsed. In 10.7, they are now all separate messages in the Inbox (organized by "Conversation"). What used to be a neat and condensed display is now a very long list.
Still searching for a solution/workaround...

Views/Topics/Messages counts

What is wrong with the Views/Topics/Messages counts in the Leopard forums?
Universal Access & VoiceOver: 23,657 Views, only 250 topics THAT many views?
Using Mac OS X Leopard: 7,071 views, 43,511 topics LESS views than the actual # of threads??
That can't be right!

Hi,
I would guess the first one is right
At Category level the Views versus Posts look similar in low level thread areas
Depending when the software counts a View for the category List (It may not count the Original Post) the others would seem to be right as in busy forums some posts move down the list quickly.
9:08 PM Tuesday; April 20, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Hey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

ey How Do I Get Group Message On The IPhone 4s because some reason it doesn't want to show . First i did is setting then messages it only show imessage and message count )HELP)

At the bottom of the page Settings > Messages you should have a section headed "SMS/MMS" Turn MMS messaging on then you can turn group message on.

In full screen mail, message count vanishes

I'm not sure if this is a Mavericks issue, or has always been an issue. When I use mail with the message viewer as a regular window, the count of messages in the mailbox I'm looking at shows in the window bar. But when I switch to full screen, the count vanishes. Am I missing something?

You're not missing something. When an app is made Full Screen, its title bar is removed. This is true for all apps; though most don't suffer from the loss of a feature the way Mail does.
If you want to see how many messages are in the currently-selected mailbox without leaving Full Screen, move your cursor to the top of the screen to reveal the Menu Bar, click on the "Window" menu and the very last item displayed in the dropdown will be the window title, which includes the message count in parenthesis. Alternatively, you can right-click (two-finger click if on a trackpad) on Mail's icon in the Dock, and it will show you the window name with the message count in parenthesis. Both options are less convenient than glancing at the menu bar, but at least you can remain in Full Screen.

Organize by Thread message counts gone?

Similar Messages

Maybe you are looking for