Organizer 10 aborts

Organizer 10 aborts on startup. So far I have downloaded the install files and did several re-installs of PSE 10 and Premiere Elements 10 with no good results.
See error message below.
PhotoshopElementsOrganizer.exe - Bad Image
C:\Program Files\Adobe\Elements 10
Organizer\CognitecRecognizer.dll is either not designed to run
on Windows or it contains an error. Try installing the program
again using the original installation media or contact your
system administrator or the software vendor for support.
I suspsect the problem is the .dll file has a zero byte count but don't know where to get a good copy.
Any help is appreciated.
JWare

Thanks for your response, Ken. I just finished trying your solution and found out
Organizer was not re-installed with PSE. I am going to uninstall PSE again, along
with Elements Premier. Getting rid of all files that has anything to do with
all three applications. Then I will download and re-install all from scratch....again
to see if that will do it. If not will as for my money back and return to PSE 7.
Don't need this head ache just trying to install the software. Never had problems
with previous versions.

Similar Messages

PSE 10 organizer aborts

I installed PS Elements 10 successfully on a W7 64 bit system.
Program run well.
Suddenly organizer aborts after showing the pictures.
I tried to repair the cataloug file, still same failure.
How can make it work again?

Organizer shows its normal screen and then a message appears
“Elements 10 Organizer does not work anymore. Due to a problem the program does not run correctly.”
After some time
“You will get a message when a solution is available” (translated form German)
Richard

PSE 8 Organizer aborts generating thumbnails

Just downloaded the trial version of PSE 8.
Installation was OK.
Editor runs OK.
Right at he first time I launched Organizer it aborted after few seconds into the thumbnails generation process.
I had not have the chance of using Organizer.
It aborts always, no matter if lauched from the start screen or from inside Editor.
Already tried all procedures at: http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Troubleshooting_ Organizer_crashes
No way to contact Adobe support: I have not registered PSE 8 since I'm still in trial period with no intention to buy a license without test-driving the product.
Running Win-7 64-bit.
Any help very welcome

I have no solution for you but my version of PSE 8 sometimes fails to create a thumbnail after importing images from a card. Out of 100 images this might happen to 2 or 3. I right-click on them and recreate the thumbnail.Using WIndows 7.

How to delete multiple folders in organizer 12

I have several duplicates of photos that I somehow created. I need to delete lots of duplicates. I see how to do it one folder at a time. However I have hundereds ! There must be a way to select more than one folder at a time for deletion. Anyone know how or if it can (or cannot) be done ?

As you have probably seen, deleting a whole folder or many files in one batch is a long process. So, it makes sense to select the max amount of files to be deleted and run the deletion when you are not busy with the Organizer. It's reasonably quick to select all the files of a given folder and assign a 'to be deleted' keyword, so if you can assign that keyword to the contents of many folders, you'll be able to select by the keyword and let the deletion be processed while you are away.
Note that deleting from catalog only or also from the drive are about as long.
Another way if you want to physically delete from drive, would be to do it outside of the organizer.
- Be sure you don't have missing files (not connected ones)
- delete from the drive
- Run the 'reconnect process' and use the menu to select all and delete all from catalog.
Warning : with big catalogs (10 000 items or more), deleting many items will take a very long time and possibly abort without deleting anything.
See:
http://feedback.photoshop.com/photoshop_family/topics/elements_organizer_unable_to_delete_ a_big_number_of_files
Both ways described above take the same time and have the above limitation.
As usual, when deleting many items, doing a full backup before is highly recommended .

Premiere Elements 12.0 not starting or aborting with AppCrash

Hi,
I do experience a strange problam with PE 12.0 . Starting it either aborts with an Appcrash error message or does not start at all whenever I try to open an existing project or when creating a new project. If I leave it alone the organizer starts.
Renaming the prefs-file in C:/Users/ab/AppData/Roaming/Adobe/Premiere Elements/12.0 as has been suggested in another thread did not work.
Any hints what I can do to get a working installation again (apart from reinstalling) ?
Thanks

Hi,
I do experience a strange problam with PE 12.0 . Starting it either aborts with an Appcrash error message or does not start at all whenever I try to open an existing project or when creating a new project. If I leave it alone the organizer starts.
Renaming the prefs-file in C:/Users/ab/AppData/Roaming/Adobe/Premiere Elements/12.0 as has been suggested in another thread did not work.
Any hints what I can do to get a working installation again (apart from reinstalling) ?
Thanks

Unable to Install Windows Server 2012 R2; system aborts and reboots after first blue Windows logo appears

System: Dell PowerEdge sc1420 with dual xeon and Adaptec 2420SA SATA RAID (supported by OS); 10 GB memory (2x4, rank 2, organization x4, in DIMM1 & DIMM2; 2x1, registered, organization x8, in DIMM3 & DIMM4)
This computer is currently running Windows Server 2008 R2 Enterprise which was installed with no problems.
Objective: clean install of Windows Server 2012 R2 Standard on an otherwise unused RAID array disk set.
All attempts to boot from DVD result in loading of files (grey progress bar on bottom of screen), brief dark screen, then black screen with a blue windows logo for about 2 seconds and then a flash of about 10 lines of error notifications on a black screen
for about 1/4 second (unreadable), and then a reboot of the computer.
Coreinfo.exe confirms that cpus DO support NX and PAE; do NOT support VMX (virtual machine enhancements).
Attempts to run memtest.exe from boot disk tool-menu startup result in an error message that the memtest.exe file is corrupt.
Running memtest.exe from Windows 2008 R2 install disk results in all memory tests passed!
Attempted booting with multiple DVD's (some +R, some -R, all verified) burned from .iso. These DVD's were used successfully to install Windows Server 2012 R2 on an HP Pavilion. Also changed DVD drives just to rule out DVD hardware.
Running CHKDSK from Windows 2012 R2 on HP Pavilion shows no problems; running CHKDSK from Windows 2008 R2 on the Dell system on the same disks shows some problems. Running checkdisk on the Windows 2008 R2 install disk from the Windows 2008 R2 installed
system shows no problems. All disks burned and verified on same system.
Also attempted to boot from USB thumbdrive with copy of DVD on it. Same results: system loads files then reboots at first Windows logo. So that would rule out disk quality issues per se??
Started to try an upgrade rather clean install to see if any errors were announced. None were announced as the system went through much of the process. I aborted somewhere along the way before committing to the upgrade because 1) the most likely
outcome was it would not boot after install (I don't really need the practice in restoring); and 2) even if it did reboot, having a system that can't be repaired by booting the install disk is pointless.
All disks and raid arrays are recognized and usable by RAID controller card and by Windows Server 2008 R2. Disks are within spec for use with Adaptec 2420SA (1TB @ 300).
Is VMX (aka VT-x) actaully required for ANY install even though Hyper-V is not intended to be used? If so, it is too bad that the Microsoft system requirements (
http://technet.microsoft.com/en-us/library/dn303418.aspx ) don't make that clear. And lack of VMX support really doesn't explain the memtest.exe "corruption" issue.
Or is it maybe something unique about the files on 2012 R2 disk (or disk image on USB) that are causing some problem with the chipset processing? But why?
My vote would be for the latter of the issues, but I have no clue why or if it is remediable. Suggestions?

So here is what I think is the final understanding of this problem:
First, one additional piece of important information: The computer successfully moves into and through the Windows Boot Loader phase and succeeding phase ONLY for Windows 8.1 32-bit, but NOT for Windows 8.1 64-bit nor for Windows
Server 2012 R2 (only 64-bit).
The Windows Boot Manager phase (which precedes the Windows Boot Loader phase) is either 32-bit or 64-bit (64 –bit for this case) and is loaded by the 16-bit stub program (Bootmgr) which starts in real mode.
Windows Boot Loader of course runs in either 32-bit or 64-bit (64 –bit for this case) according to the product being installed.
By inference, the essential problem is occurring in conjunction with the loading of a WIM file to start the Windows Boot Manager.
The boot manager starts ok and generally shows its essential screens (Windows Boot Manager; Advanced Boot Options) or proceeds to load files for transition into Windows startup in the succeeding Windows Boot Loader phase (that doesn’t “boot” but rather
loads the system). This is best confirmed by the announced corruption of the memtest.exe file when selecting Windows Memory Diagnostic from the Windows Boot Manager Screen.
If allowed to continue loading files to pass control to the Windows Boot Manager, the type of abort and resulting immediate restart that occurs is that which you would associate with unhandled cpu exceptions (invalid instruction, memory out of range,
wild interrupt, etc.) that most of us have not commonly seen for 20 years (since beginning to use well behave OS’s from Windows NT 3.1 and on).
So, the problem obviously is due to a failure to properly mount the WIM file and/or properly access it (probably the latter) when running in 64-bit protected mode.
This is independent of the hardware on which the install disk is actually mounted (DVD or USB-flash), so it is NOT a hardware problem
per se.
Since the WIM is mounted early in the process, Boot Manager may well have loaded it using BIOS routines to access the physical device on which it resides rather than loading 32-bit or 64-bit drivers of its own.
Hence, if the BIOS does not “mount” the WIM in a way that is later fully compatible with access from the 64-bit systems being loaded, it could cause apparent file corruption.
If it is only partially incompatible some functionality may appear quite usable (like loading files) until later detected.
This is vague on my part, because the exact nature of the incompatibility cannot be readily determined from the information available.
But the consequence is the same: the system cannot boot from the install disk, either for initial installation or repairs.
Incidental conclusion: The 64-bit boot manager code for Windows Server 2008 does not exhibit this faulty behavior, but the 64-bit code for Windows Server 2012 does.
So the problem is not inherent with loading 64-bit server OS’s.
Expectations: If the system were to be upgraded using the features of the install disk while running an installed OS, say Windows Server 2008 R2, it might well succeed and yield a fully functional system upgraded to Windows Server 2012
R2 (because the installed operating system is started from discrete files, not from a WIM file).
However, in order to perform a disaster recovery using Windows resources (such as image backups from Windows Server Backup), one would have to presumably boot from a Windows Server 2012 64-bit install disk or Windows Server USB recovery drive.
Of course we know that the Windows Server install disk will not boot and we can be fairly sure that the problem will migrate to any Windows Server USB recovery drive that is created.
My inspection of a Windows 7 System Repair CD shows that is based exclusively on boot.wim, not discrete files!
Of course a generated image for a WIM for Windows 2012 USB recovery drive
might not have the flaw that drives this behavior, but it probably would.
Problem conclusion: A BIOS upgrade would be required for compatibility with Windows Server 2014 clean installation
and any maintenance; and none is available from the OEM.
Problem not resolved, but understood for future reference.
Thanks to Tim whose comments helped me focus my thinking.

Replication process halts and aborts

Hello all,
We have a an instance of NS Directory 4.15 running on solaris 2.6.
We have 1 Supplier and 15 Consumers.
During replication of 4 consumers, the replication process halts and aborts,
and error messages similar to the following messages appear:
[29/Oct/2001:14:32:02 +0200] - Automatic online replica
creation is turned off. Replication cannot continue until you manually
reinitialize the consumer from the replication admin screen. Aborting.
[29/Oct/2001:14:32:02 +0200] - consumer XXX.XXX.XXX.XXX/o=XXX.XXX:
REPLICATION HALTED
the above error messages occur.
Why is it happen?
What should I do to prevent it?
Please let me know.
Thanks,

Ehhh.. Real-time makes it significantly more complex. What versions of Oracle & Sybase do you have?
To achieve this level of "real-time" replication, you are realistically going to have to set up a message-passing system to send the data changes from Sybase to Oracle. If you had a window of at least a few minutes, you could use something like Sybase Replication Server or Oracle Heterogeneous Services to do the replication in batches.
At a high level, whenever a data change is made in Sybase, a message will need to be created and propagated to the Oracle database where the change is applied. You can roll this sort of thing yourself using JMS (Java Messaging System) since that is pretty standard-- you can configure Sybase to generate JMS messages and configure Oracle Advanced Queues to accept those messages. You would then need to write a process in Oracle that dequeued and processed the messages.
Sybase Real-Time Data Services may be helpful here. What isn't clear to me, though, is how much code you really end up not having to write vs. how much effort is required on the setup & maintenance side. Whether you go for a custom point-to-point solution or the message bus approach probably depends on whether this is a one-off project or whether this is something that your organization is going to want to leverage for multiple projects.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

BBP_OM_FIND_SC Brings deleted purchase Organizations

Hi,
When creating a SC in SRM 5.0 and we get an exception. After debuging LBBP_PDORGF11 we get to the point where the BBP_OM_FIND_SC is called.
with parameters : SEARCH_FOR = some_user and SEARCH_CATID = [logsys,catid] the result is [C22,50001122] (Purchase Organization)
The problem is that Purchase Organization no longer exist in PPOMA_BBP. It was deleted. But it seems that the relationship between PurgOrg, CatID and User is still present in system tables. So we need a way to update data again (perhaps runnig a report or transaction but not directly in tables) based in the actual Purchase Organizations.
Best regards.

Atul,
Here's the information on ST22
Runtime Error          UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Date and Time          19.03.2007 20:08:10
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Buffer table not up to date
Active Calls/Events
No.   Ty.          Program                             Include
      Name
   18 FUNCTION     SAPLBBP_PDH                         LBBP_PDHU08
      BBP_PD_ABORT
   17 FORM         SAPLBBP_PDORG                       LBBP_PDORGF01
      ABORT
   16 FORM         SAPLBBP_PDORG                       LBBP_PDORGF11
      CHECK_PROC_ORG_AND_GROUP
   15 FORM         SAPLBBP_PDORG                       LBBP_PDORGF01
      ORG_CHECK_SINGLE
   14 FORM         SAPLBBP_PDORG                       LBBP_PDORGF01
      ORG_MAINTAIN_SINGLE
   13 FUNCTION     SAPLBBP_PDORG                       LBBP_PDORGU01
      BBP_PDORG_CREATE
   12 FORM         SAPLBBP_PDIAD                       LBBP_PDIADF1N
      ITEM_F_CREATE_FROM_WTAB
   11 FORM         SAPLBBP_PDIAD                       LBBP_PDIADF0E
      ITEMLIST_F_UPDATE
   10 FUNCTION     SAPLBBP_PDIAD                       LBBP_PDIADU12
      BBP_ITEMLIST_UPDATE
    9 FORM         SAPLBBP_PD                          LBBP_PDF0J
      PROCDOC_UPDATE
    8 FUNCTION     SAPLBBP_PD                          LBBP_PDU04
      BBP_PROCDOC_UPDATE
    7 FUNCTION     SAPLBBP_PD_SC                       LBBP_PD_SCU04
      BBP_PD_SC_UPDATE
    6 FORM         SAPLBBP_SC_APP                      LBBP_SC_APPF14
      SC_UPDATE
    5 FORM         SAPLBBP_SC_APP                      LBBP_SC_APPF67
4 FUNCTION     SAPLBBP_SC_APP                      LBBP_SC_APPU02
   BBP_SC_APP_EVENT_DISPATCHER
3 FORM         SAPLBBP_SC_UI_ITS                   LBBP_SC_UI_ITSF05
   APP_EVENT_HANDLER
2 FORM         SAPLBBP_SC_UI_ITS                   LBBP_SC_UI_ITSF02
   SC_EVENT_DISPATCHER
1 MODULE (PAI) SAPLBBP_SC_UI_ITS                   LBBP_SC_UI_ITSI01
   SC_EVENT_DISPATCHER
Information on where terminated
    The termination occurred in the ABAP program "SAPLBBP_PDH" in "BBP_PD_ABORT".
    The main program was "SAPLBBP_SC_UI_ITS ".
    The termination occurred in line 73 of the source code of the (Include)
     program "LBBP_PDHU08"
    of the source code of program "LBBP_PDHU08" (when calling the editor 730).
I checked SLG1 and there's no hit about this issue. Alse review the notes you mentioned but I believe that apply to another kind of errors not specific to BBP_OM_DETERMINE_RESP_PGRP
regards

ERROR Opening PSE 8 Organizer Freezes

After downloading files from my camera the Organizer opens and another window opens titled “Files Ready for Import”.
Clicking on YES or NO this window goes away and the Organizer stays busy and the application freezes. The Task manager has to be used to abort the PSE8 application. The files did get downloaded but the organizer does not seem to know what to do with them.

I do not find the"APDLogs" directory. Here is what I see...
Is there somewhere else to look?
Thanks for any help you can provide!
!!!! WAIT !!!!
I just tryed it again and it seems to be working.
Is it possible that it could have cleared on it's own. I have used the editor in the meantime, without going through the Organizer, and now I open the organizer and it worked.
I am currently backing up the catalog.
Thanks for the magic you provided!

VI Organizer

Hi Everyone,
VI Organizer is recently released. It is toolkit that helps LabVIEW developers to control their working VIs quickly. Besides basic functions like opening or closing a group of VIs, it can also store VI locations and restore it later, and abort modal VI. A more detailed description is on this page:
https://lavag.org/topic/18991-cr-vi-organizer/
Suggestions are really appreciated!
Thanks in advance!
Antonio Wang
Synovus Solutions Inc.
System and Software Engineer

I am also having trouble with MediaSource. My zen shows plugged in, but the program is not recognizing it exists and I have had to completely uninstall my programs 3 times and completely erase everything off my zen and re-enter my music, videos and pics in order to use it. Now it's not working at all. I can't even sync my downloads anymore. I am fed up. This should be this hard to use a stupid mp3 player.

Organizer changes to me when accepting event made with Lotus Notes

This problem seems to happen when an event is made with Lotus Notes (8.5.2) is sent to me via email. After I accept the event I become the event organizer and emails are sent out to all the other attendees by me.
Looking at the original CalDAV event in Textedit I can see that the event has an organizer listed this way. ATTENDEE;ROLE=CHAIR;... However, once the event is brought into Calendar that person's status in the event gets demoted to ATTENDEE;CN="FIRST LAST";CUTYPE=INDIVIDUAL;PARTSTAT=TENTAIVE;ROLE=REQ-PARTICIPANT... Looking at the imported event Calendar there seems to be no organizer listed which could be why I become the organizer. A sort of default behaviour.
Has anyone seen this behaviour or have any suggestions for me.
Much appreciated.

After I had my former notebook migrated to a new one, I am back to a problem I had before.
After probing around a little bit I found: Sync of notes calendar works for the minimum interval 1 week in the past, 1 month in the future. But as soon as I change either one to more, no data gets transfered to the phone. The report says: A problem occured, therefore sync was aborted.
- What is wrong with my calendar data in the notes file?
- How can I find this and fix it? (I use my calendar extensively, e.g. I paste text-notes and sometimes images (maps) into a calender document)
My Mail and contacts (address book names.nsf) are on Lotus Notes 7.0.3. Nokia PC Suite is 7.1.18.0.
When I sync with the server notes mailfile, I see a counter on the phone screen that gets stuck at a certain number (in my case 80 out of thousandsomething). How can I find out with this information, which entry in my notes calendar creates the problem and aborts sync? Is the number on the phone screen when the counter stops useful?

CD imported to wrong folder organization Album/Artist instead of Artist/Alb

I imported (ripped) a CD and the folder convention iTunes created in my music library was like this:
AlbumName/ArtistName
instead of
ArtistName/AlbumName
How could this happen. I have ripped hundreds of CD's and this is the first time it has happened. I am letting iTuned organize my files.
Any clues?
Thanks!

Actually I know exactlty what bae77345 is referring to, because I am running into the same problem. Thus my search in the forums.
Usually Ive had no problem in importing a song into iTunes, and changing the song IN iTunes to read as follows.
Name of Song: DAYS `EUREKA OPENING MIX`
Artist: Anime
Album : Eureka seveN OST 1
Album artist: FLOW
And the Windown path would look like this
C:\Documents and Settings\Varxtis\My Documents\My Music\iTunes\iTunes Music\Anime\Eureka seveN OST 1\1-01 DAYS `EUREKA OPENING MIX`.mp3
Notice It goes Artist>Album>Song Title
Album Artist would not even be part of the path, which is exactly what I want.
but now it shows
C:\Documents and Settings\Varxtis\My Documents\My Music\iTunes\iTunes Music\FLOW\Eureka seveN OST 1\1-01 DAYS `EUREKA OPENING MIX`.mp3
Which goes AlbumArtist>Album>Song Title. it doesn't even include the artist as part of the path. How annoying.
It makes a HUGE difference to me because I need everything in "iTunes Music" library in windows to be pathed as Artist>Album: Song Title. I use a different MP3 Player so, it's almost impossible to have half one way (those that have albumartist) and half another (those that don't) BTW, Sorry apple. . .no Offense. I've had and loved an iPod. . . but it died and I got this as a gift.
I never changed any settings, and quite honestly it's been about a month since I had to update my MP3 player music (thus noticing the problem). So, there HAS to be a reason for it to change. And more importantly, a way to change it back.
Windows XP
Windows XP
Windows XP

My picture folder is missing from my laptop and I am having trouble with how to organize my pictures in folders

I have been trying to learn how to use my MacBook Pro better so I can get my photos on it. I do not like iPhoto at all because it was not letting me organize my photos the way I always did in Windows Explorer. I am now trying to use Lightroom and I have run into some issues with how my photos are showing up.
1. Whenever I removed my photos from iPhoto so I could start over, my Picture file in Finder disappeared. I do not believe I deleted it but somehow I must have. I was trying to just delete my pictures from Imgages under All My Files. I thought that All My Files was duplicating data and I don't want duplicate pictures on my computer. However, now I am just wondering if All My Files is just a link to my actual files. What is the purpose of that?
2. I imported one photo card to try to work with it and made a new Pictures folder on my desktop and arranged it using some folders and sub-folders I created.
3. I then uploaded these through lightroom.
4. Somehow, all of my photos were showing up in images, which is not where I wanted them and I deleted the duplicates.
5. Now many of my folders in the Picture file I created on the desktop are empty with no photos
6. I tried to restore my pictures from the trash to Images under All My Files and it keeps putting them into documents
7. I have been trying to learn how to use this computer but it seems so different from what I was always used to with Explorer. This should not be that complex but I search and search on the web and can't seem to find exactly what I need to help me

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

How can we assign Items from One Organization to a different Organization.

Team,
1. We have a requirement to load all the items from Organization A to Organization B. Both are in different Operating Unit.
Is there any API available to do this?
Thanks
-Karthik

As long as you have the same master org in the 2 operating units, all you have to do is
INSERT INTO mtl_system_items_interface
            (organization_code, segment1, transaction_type, set_process_id, process_flag)
   (SELECT '&new_Org', msi.segment1, 'CREATE', 100, 1
      FROM mtl_system_items_b msi
     WHERE organization_id = &old)And run the Import Items request.
Hope this helps,
Sandeep Gandhi

How do I use multiple librarys to organize my projects

Is there a way to use multiple libraries to organize my projects. I don't like having all my projects in one library. I'd like separate libraries for Family_Movies, BirthdaysandHolidays, Vacations, etc...
Thanks.

You can create multiple folders in your Project Library. I have a folder for each year. Then within the year, if I make several videos on one subject (say a trip to Europe) I will create sub folders within the year.
There is no limitation on what you name your Folders, so you could name them Family Movies, Vacations, Birthdays, etc.
When you are in the Project Library View, you can click FILE/NEW FOLDER. For a subfolder, click on the parent folder and then click New Folder.
Message was edited by: AppleMan1958

Organizer 10 aborts

Similar Messages

Maybe you are looking for