Organizer 12 - how to zoom over 100%, compare images, use the Magic Trackpad?

English Version below.
Hallo zusammen. Ich bin von Apple Aperture auf PSE 12 gewechselt. Nun habe ich meine 11500 Fotos im Organizer und ein paar Startschwierigkeiten.
Ich habe in den Voreinstellungen angegeben, dass man Fotos auf über 100% skalieren darf. Das funktioniert aber nicht. Fotos werden immer nur im Fenster eingepasst, wenn der Zoomhebel ganz nach rechts steht.
Einzig in der Vollbildansicht kann man über 100% skalieren. Dies funktioniert aber auch, wenn ich die Voreinstellung dazu nicht gesetzt habe.
ie vergleiche ich mehrere Bilder? Im Handbuch steht beschrieben, dass man dazu aus dem Menü Ansicht -> Bilder Vergleichen wählen soll. Diesen Menüpunkt gibt es bei mir nicht.
Auch bei dem Druck auf F12 geschieht bei mir nichts. Kann ich die Tastenfunktionen irgendwo neu zuweisen?
Zu guter Letzt: kann ich die Zoom & Pinch Funktion des Magic Trackpads irgendwie einschalten? Das vermisse ich sehr. Da war Aperture sehr Bedienerfreundlich.
English Version
Hi there. I switched from Apple Aperture to PSE 12. Now I have my 11500 photos in the Organizer and a few teething problems.
I have specified in the preferences that you can resize photos to over 100%. This does not work. Photos are always fitted only in the window when the zoom lever is all the way to the right.
Only in the full-screen view you can scale over 100%. However, this also works if I have not set the setting in the preferences.
How do I compare multiple images? The manual describes to select from the View menu -> Compare images. This menu item does not exist for me. (German Version)
Also by pressing F12, nothing happens. Can I re-assign the button functions somewhere?
Last but not least: How can I use the zoom & pinch from the Magic Trackpad? I 'm missing that very much. Aperture was very user friendly with that.

Hello Barbara and thank you for your answer.
I've ment side by side view. And it works by pressing F12 + cmd. Thanks.
Zoom & Pinch only works in the Editor, but not very well or smooth. And I couldn't tell you how often the Editior rotate my images unwanted ...
In the preferences of the Organizer, there is no point for a scroll wheel. And I'm really not able to zoom in the organizer over the "fitts in screen" size.
And I've found some more problems Sometime I'd like to export my images without any Exif/Metadata Information and resized. I haven't found any point do do so.
At the Moment, I'm thinking about switching back to Aperture, where I came from - I've tried to use PSE 'cause of Adobes Raw Converter, which is much much better with Olympus RAW Files than Apertures.

Similar Messages

Organizer 12 - how to: zoom over 100%, use the Trackpad, compare images?

English Version below.
Hallo zusammen. Ich bin von Apple Aperture auf PSE 12 gewechselt. Nun habe ich meine 11500 Fotos im Organizer und ein paar Startschwierigkeiten.
Ich habe in den Voreinstellungen angegeben, dass man Fotos auf über 100% skalieren darf. Das funktioniert aber nicht. Fotos werden immer nur im Fenster eingepasst, wenn der Zoomhebel ganz nach rechts steht.
Einzig in der Vollbildansicht kann man über 100% skalieren. Dies funktioniert aber auch, wenn ich die Voreinstellung dazu nicht gesetzt habe.
ie vergleiche ich mehrere Bilder? Im Handbuch steht beschrieben, dass man dazu aus dem Menü Ansicht -> Bilder Vergleichen wählen soll. Diesen Menüpunkt gibt es bei mir nicht.
Auch bei dem Druck auf F12 geschieht bei mir nichts. Kann ich die Tastenfunktionen irgendwo neu zuweisen?
Zu guter Letzt: kann ich die Zoom & Pinch Funktion des Magic Trackpads irgendwie einschalten? Das vermisse ich sehr. Da war Aperture sehr Bedienerfreundlich.
English Version
Hi there. I switched from Apple Aperture to PSE 12. Now I have my 11500 photos in the Organizer and a few teething problems.
I have specified in the preferences that you can resize photos to over 100%. This does not work. Photos are always fitted only in the window when the zoom lever is all the way to the right.
Only in the full-screen view you can scale over 100%. However, this also works if I have not set the setting in the preferences.
How do I compare multiple images? The manual describes to select from the View menu -> Compare images. This menu item does not exist for me. (German Version)
Also by pressing F12, nothing happens. Can I re-assign the button functions somewhere?
Last but not least: How can I use the zoom & pinch from the Magic Trackpad? I 'm missing that very much. Aperture was very user friendly with that.

You cannot zoom in on an more that fitting the screen space will looking at images in the Organizer's image well. This size may be much smaller than 100%.
There is no preference to "resize photos to over 100%".
There is also not a Compare option in the View menu.
To do either of these options (from the Organizer) you have to be in the Full Screen mode. From here, you can use the mouse wheel (or trackpad) to zoom up to 1600%. You can also compare images by selecting the Side-by-Side or Top/Bottom display from the "View" Options button on the Full Screen options bar.
To use the F-keys, you have to add the Command key, so Command+F12 will open the Full Screen Mode in side-by-side compare view.
If you purchased Photoshop Elements as a replacement for Aperture, there are a lot of differences that you will have to adjust to. Photoshop Elements and Aperture are hardly complementary applications. If you were looking for something like Aperture, you should try Lightroom instead.

How do I select similarly colored text using the magic wand?

I converted a large document from RGB to CYMK (File | Document Color Mode). I'd like to select all of the text that was RGB(0,0,0) and is now CMYK(75.02,67.97,67.02,90.16) so I can change it to CMYK(0,0,0,100). I think the magic wand is the way to do this (correct me if I'm wrong).
I have text in a dozen or more text areas. Many of the text areas overflow text into another text area. Some of the text in the text areas is "black" but there is also text with other colors that I'd like to remain unchanged.
For example, I'd like to select all of the black text in the following two text areas without selecting the red text. I thought that I could click on the black text and have all the black text (but not the red text), selected, but the entire text box is selected (and nothing in the second text box is selected). Can the wand select some text within several text boxes? If not, how should I go about changing the black? Thanks.

Thanks Mylenium.
If I use the Same Fill command, it does select both text areas. But if I then choose a replacement color (e.g., CMYK(0,0,0,100)) all of the text in both text areas is changed to black (i.e., the red text in my above illustration also changes to black).

How do I open a raw image with the Photoshop raw plug in as opposed to the Bridge raw plug-in.

I read in a book on adobe raw that it is often useful to open an image at the same time with the adobe camera raw bridge plug in and the Photoshop camera raw plug in.
I can open a raw image in photoshop but I suspect I am not actually getting access to the camera raw plug in as none of the controls present in the bridge raw plug seem to be available from within Photoshop.
Of course I can access bridge and the bridge raw plug in by opening bridge from within Photoshop but this is not what I want to do. I would like to open the image using the photoshop raw plug in not the bridge plug in.
Clueless . . . and confused.
--Kenoli

Thanks for the discussion. It is interesting. Let me clarify a bit regarding my issue.
I am using Mountain Lion OSX on a mac, of course, and CS6. I have been using Aperture, a piece of Apple Software similar to Light Room to organize my images, opening them from Aperture in Photoshop to edit them, as I am both familiar with Photoshop and like the way it does things better than Aperture. I recently started using CS6 and working with Adobe Camera raw 7, which I think is the version that comes with CS6. All the info I can get from the web site, including a very nice tutorial from Adobe on camera raw, simply tells me to open it from Bridge. When I do this, I get a nice set of sliders and other adjustments specifically associated with Adobe Camera Raw and the camera I am using.
I can open a file in Photoshop using the method SkillRooster suggests and, sure enough, it opens it with the camera raw plug-in (if I simply open the image by double clicking on it it opens in photoshop, no plug-in). If I then go to bridge and open it from there, I don't get a second instance of Camera raw, it simply points me at the instance opened through Photoshop.
However, when I open a raw image in Photoshop from Aperture (raw images open with no problem) I simply get the Photoshop interface, not the camera raw plug-in, the same as if I had double clicked on the image to open it from outside of Aperture. I am trying to figure out if there is some way to open an image from Aperture in Photoshop so that it opens in the camera raw plug-in. One possibility I could imagene is to open it in Photoshop and from there open it in the plug-in. The only thing I see regarding this in Photoshop is a menu item that lets me close the image and open Bridge, which doesn't help me with my Aperture issue. I could decide to switch to bridge, but with the thousands of images I now have in Aperture, this would be quite a bit of work. I may just have to work with both going forward.
The root of my original question comes from something I recently read in a book by Bruce Fraser on Camera Raw which is excellent, but it focues on CS 5.5 as he died before being able to update it. In that book he describes a trick he uses where he opens the raw image in a plug-in in Bridge and then opens it a second time using a plug-in in Photoshop. This give him a chance to compare adjustments between the two open images. As I mentioned above, when I try to do this by starting with Photoshop and then going to Bridge, it points me at the same instance. I can't open it in Bridge and then Photoshop since once it is open in Bridge, it won't let me into Photoshop without closing the image in Bridge. I was thinking there might be something in Fraser's method that would help me with my Aperture issue, but can't reproduce what he describes.
Perhaps this was possible in CS5.5 but no longer in CS6.
Another work around I can imagine is to do all my raw editing from Bridge and then save the file as a DNG file in Aperture. I suspect that after that, I am stuck with doing any more raw editing using the Aperture camera raw funcions, which are a bit lacking compared with Adobe Camera Raw.
Hope I am being clear here about my dilemma. Any help would be welcomed.
--Kenoli

TS3276 cannot receive mail after i sent a large photo. A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out. i have read apple support and done everything they suggest. Help!

I cannot receive mail after i sent a large photo. A new folder appeared called "recovered messages" with the over 100 recovered emails of the same email of the one i sent out. i have read apple support and done everything they suggest. Help!

How large is 'large'?

I have installed a trial of Adobe illustrator on my macbook pro. I want to trace an image using the custom trace button but can't. Does anyone have any ideas how I could custom trace?

I have installed a trial of Adobe illustrator on my macbook pro. It is the 2014 release of adobe illustrator. I want to trace an image using the custom trace button.
I start a new document. Then I place my scanned pencil/colored pencil drawing, in to the document. I have tried scanning and then placing it as a jpeg, bitmap, and tiff file. I have tried scanning and then placing it, in color and in black and white. The scan mode I use is flatbed. Adobe illustrator allows me to select the default button and one of eleven preset buttons (e.g high fidelity photo), but it does not allow me to click the custom trace button. The custom trace button is grey while all the other buttons are white.
Does anyone have any ideas how I could custom trace?

It seems pointless to adjust it afterwards because it is then only a couple a pencil lines rather then a full drawing. And how do I adjust it afterwards? Would I do this using the different buttons under the window button?

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

You're welcome.
Going back to your original post:
5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
tt2

How to add byte[] array based Image to the SQL Server without using parameter

how to add byte[] array based Image to the SQL Server without using parameter.I have a column in table with the type image in sql and i want to add image array to the sql image column like below:
I want to add image (RESIM) to the procedur like shown above but sql accepts byte[] RESIMI like System.Drowing. I whant that sql accepts byte [] array like sql image type
not using cmd.ParametersAdd() method
here is Isle() method content

SQL Server binary constants use a hexadecimal format:
https://msdn.microsoft.com/en-us/library/ms179899.aspx
You'll have to build that string from a byte array yourself:
byte[] bytes = ...
StringBuilder builder = new StringBuilder("0x", 2 + bytes.Length * 2);
foreach (var b in bytes)
builder.Append(b.ToString("X2"));
string binhex = builder.ToString();
That said, what you're trying to do - not using parameters - is the wrong thing to do. Not only it is insecure due to the risk of SQL injection but in the case of binary data is also inefficient since these hex strings are larger than the original byte[]
data.

Firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link

firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link.

You can right-click the image and use "Save Image As" to save that image.

How do I create a duplicate image inside the same page? Then how do I change the color of that image

how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

Hello there!
Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
My layers panel looks like below.
To duplicate your image, click the downward arrow on the right side of your Layer Panel.
Select Duplicate Layer. This will duplicate the layer that the image is on.
Select "OK" to approve the duplication.
As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
Now to colorize your image, go to Window > Adjustments.
The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
As you can see below, the image is now red.
Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
Select the move tool, so I can now move the image layers so we can see both of them.
With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
I hope that helps. i have also included helpful links.
Please post back with any questions,
Janelle

How do I create a single image using PSE12 from multiple originals where each original is still separate?

How do I create a single image using PSE12 from multiple originals in which the originals are still separate (i.e. side by side or arranged in a square)? I could do this in PSE2, but can't find how to get PSE12 to do it.
Grecophile55

In PSE2 there was a single photo-merge. I browsed all my images and I could then click and drag each to its new position before saving. There doesn’t seem to be a similar facility in PSE12.

I have an iPad 2 and a Nikon DSLR. How can I transfer RAW/Tiff images using a compact flash card

I have an iPad 2 and a Nikon DSLR. How can I transfer RAW/Tiff images using a compact flash card? Plugging in the camera at the ipad connector doesn't seem to work, possibly due to lack of power.

This may apply.
Fix (for Nikon D800)
http://www.georgewheelhouse.com/blog/2012/10/ipad-ios-6-update---camera-connecti on-kit-fix
Are you using an SD, SDHC, or SDXC card? And what capacity?
 Vheers, Tom

HT3696 How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

How to know if your mac is using the latest Haswell architecture processor or not? and how to know the difference between the new imac and the 2012/13 imac?

Sorry to reopen an old post, but I've just purchased a 2nd hand late-2013 iMac (or so thats what the seller said).
I'm always sceptical though, and just wanted to know if there is a way to check if my iMac is indeed the late-2013 model that included Haswell?
I've attached screenshots of the About This Mac section hoping it may help shed some light.
Thank you in advance for your help!
PS - I can't compare to the iMac specs link you posted above because its now showing the late-2014 models.
<Image Edited by Host to Remove Serial Number>

Capture an image using the web camera from a web application

Hi All,
Could anyone please share the steps what have to be followed for capture an image using the web camera from a web application.
I have a similar requirement like this,
1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.
3) Upload the Image to the server from the temporary location.
Please share the details like, what can be used and how it can be used etc...
Thanks,
Suman

1) Detect the Webcam on the users machine from the web application.(To be more clear when the user clicks on 'Add Photo' tool from the web application)There's not really any good way to do this with JMF. You'd have to somehow create a JMF web-start application that will install the native JMF binaries, and then kick off the capture device scanning code from the application, and then scan through the list of devices found to get the MediaLocator of the web cam.
2) When the user confirms to save, save the Image in users machine at some temporary location with some unique file name.You'd probably be displaying a "preview" window and then you'd just want to capture the image. There are a handful of ways you could capture the image, but it really depends on your situation.
3) Upload the Image to the server from the temporary location.You can find out how to do this on google.
All things told, this application is probably more suited to be a FMJ (Freedom for Media in Java) application than a JMF application. JMF relies on native code to capture from the web cams, whereas FMJ does not.
Alternately, you might want to look into Adobe Flex for this particular application.

How do you select multiple words using a Magic Trackpad?

I know how to select multiple words with my mouse, but cannot figure out how to do it using my new Magic Trackpad. Here's the deal:
Let's say you want to select "cannot figure out how to" in the sentence above. With my mouse, I'd place the cursor somewhere over the word "cannot," double-left-click and keep holding the button down. Then, dragging to the right, it would select each word in its entirety as I moved along the sentence. I do this all the time since it is a very quick way to select text.
Okay, so how do you do this with the Magic Trackpad?
I try a similar behavior, but it doesn't work. If I double-tap on "cannot," for example, one of two things happens. Either only the word "cannot" is highlighted and dragging does nothing to highlight more text. Or, if I'm quicker with the drag (aka swipe) right, it will select one character at a time starting from the cursor position when I double-tapped and not entire words, as I want.
I'm stumped. Anyone?

Jeffrey,
The only good way seems to be by using the physical click on the Trackpad. Double physical click then drag. Much the way it's done on the mouse.
Regards
Captfred

Organizer 12 - how to zoom over 100%, compare images, use the Magic Trackpad?

Similar Messages

Maybe you are looking for