Organizer 12 - how to: zoom over 100%, use the Trackpad, compare images?

English Version below.
Hallo zusammen. Ich bin von Apple Aperture auf PSE 12 gewechselt. Nun habe ich meine 11500 Fotos im Organizer und ein paar Startschwierigkeiten.
Ich habe in den Voreinstellungen angegeben, dass man Fotos auf über 100% skalieren darf. Das funktioniert aber nicht. Fotos werden immer nur im Fenster eingepasst, wenn der Zoomhebel ganz nach rechts steht.
Einzig in der Vollbildansicht kann man über 100% skalieren. Dies funktioniert aber auch, wenn ich die Voreinstellung dazu nicht gesetzt habe.
ie vergleiche ich mehrere Bilder? Im Handbuch steht beschrieben, dass man dazu aus dem Menü Ansicht -> Bilder Vergleichen wählen soll. Diesen Menüpunkt gibt es bei mir nicht.
Auch bei dem Druck auf F12 geschieht bei mir nichts. Kann ich die Tastenfunktionen irgendwo neu zuweisen?
Zu guter Letzt: kann ich die Zoom & Pinch Funktion des Magic Trackpads irgendwie einschalten? Das vermisse ich sehr. Da war Aperture sehr Bedienerfreundlich.
English Version
Hi there. I switched from Apple Aperture to PSE 12. Now I have my 11500 photos in the Organizer and a few teething problems.
I have specified in the preferences that you can resize photos to over 100%. This does not work. Photos are always fitted only in the window when the zoom lever is all the way to the right.
Only in the full-screen view you can scale over 100%. However, this also works if I have not set the setting in the preferences.
How do I compare multiple images? The manual describes to select from the View menu -> Compare images. This menu item does not exist for me. (German Version)
Also by pressing F12, nothing happens. Can I re-assign the button functions somewhere?
Last but not least: How can I use the zoom & pinch from the Magic Trackpad? I 'm missing that very much. Aperture was very user friendly with that.

You cannot zoom in on an more that fitting the screen space will looking at images in the Organizer's image well. This size may be much smaller than 100%.
There is no preference to "resize photos to over 100%".
There is also not a Compare option in the View menu.
To do either of these options (from the Organizer) you have to be in the Full Screen mode. From here, you can use the mouse wheel (or trackpad) to zoom up to 1600%. You can also compare images by selecting the Side-by-Side or Top/Bottom display from the "View" Options button on the Full Screen options bar.
To use the F-keys, you have to add the Command key, so Command+F12 will open the Full Screen Mode in side-by-side compare view.
If you purchased Photoshop Elements as a replacement for Aperture, there are a lot of differences that you will have to adjust to. Photoshop Elements and Aperture are hardly complementary applications. If you were looking for something like Aperture, you should try Lightroom instead.

Similar Messages

Organizer 12 - how to zoom over 100%, compare images, use the Magic Trackpad?

English Version below.
Hallo zusammen. Ich bin von Apple Aperture auf PSE 12 gewechselt. Nun habe ich meine 11500 Fotos im Organizer und ein paar Startschwierigkeiten.
Ich habe in den Voreinstellungen angegeben, dass man Fotos auf über 100% skalieren darf. Das funktioniert aber nicht. Fotos werden immer nur im Fenster eingepasst, wenn der Zoomhebel ganz nach rechts steht.
Einzig in der Vollbildansicht kann man über 100% skalieren. Dies funktioniert aber auch, wenn ich die Voreinstellung dazu nicht gesetzt habe.
ie vergleiche ich mehrere Bilder? Im Handbuch steht beschrieben, dass man dazu aus dem Menü Ansicht -> Bilder Vergleichen wählen soll. Diesen Menüpunkt gibt es bei mir nicht.
Auch bei dem Druck auf F12 geschieht bei mir nichts. Kann ich die Tastenfunktionen irgendwo neu zuweisen?
Zu guter Letzt: kann ich die Zoom & Pinch Funktion des Magic Trackpads irgendwie einschalten? Das vermisse ich sehr. Da war Aperture sehr Bedienerfreundlich.
English Version
Hi there. I switched from Apple Aperture to PSE 12. Now I have my 11500 photos in the Organizer and a few teething problems.
I have specified in the preferences that you can resize photos to over 100%. This does not work. Photos are always fitted only in the window when the zoom lever is all the way to the right.
Only in the full-screen view you can scale over 100%. However, this also works if I have not set the setting in the preferences.
How do I compare multiple images? The manual describes to select from the View menu -> Compare images. This menu item does not exist for me. (German Version)
Also by pressing F12, nothing happens. Can I re-assign the button functions somewhere?
Last but not least: How can I use the zoom & pinch from the Magic Trackpad? I 'm missing that very much. Aperture was very user friendly with that.

Hello Barbara and thank you for your answer.
I've ment side by side view. And it works by pressing F12 + cmd. Thanks.
Zoom & Pinch only works in the Editor, but not very well or smooth. And I couldn't tell you how often the Editior rotate my images unwanted ...
In the preferences of the Organizer, there is no point for a scroll wheel. And I'm really not able to zoom in the organizer over the "fitts in screen" size.
And I've found some more problems Sometime I'd like to export my images without any Exif/Metadata Information and resized. I haven't found any point do do so.
At the Moment, I'm thinking about switching back to Aperture, where I came from - I've tried to use PSE 'cause of Adobes Raw Converter, which is much much better with Olympus RAW Files than Apertures.

Cannot zoom in Safari using the trackpad

Hi,
I have got a MacBook Pro 13" 2011 with OSX Lion, and I've got a problem using my trackpad in safari : I can zoom once or twice, and after it doesn't zoom anymore. I can do all others multi-touch gestures...
Thanks

Espen Vestre wrote:
And at the times when it's working, it's very unstable in Safari and will quite often make the web page view "freeze" in a "half-magnified", "blurry" state. If that happens, scrolling the page or clicking links doesn't work. A double-click to zoom often "wakes" the page up again.
I haven't had this problem for a while, but it occurred once yesterday (fixed with double-click-to-zoom twice) and today in my first attempt of using Safari after upgrading to 10.7.2!! (And despite the fact that I've disabled pinch-to-zoom in the preference pane) And this last time I couldn't fix it with a double click, I had to close and reopen the tab with the "frozen page" in it.

I am unable to zoom in/out using the touch pad; yesterday i could zoom in/out of website pages, pics, etc, now today it is not letting me; how do i fix this?

i am unable to zoom in/out using the touch pad; yesterday i could zoom in/out of website pages, pics, etc, now today it is not letting me; how do i fix this?

See Here > http://support.apple.com/kb/HT1212

Running 10.8.3 on an Intel iMac 27'. The Finder keeps grabbing over 100% of the CPU which seems to stop me from opening any folders. Only quitting the Finder from Activity monitor resets it to normal. Any ideas?

My Finder keeps grabbing over 100% of the CPU which seems to stop me from opening any folders.
Only quitting the Finder from Activity monitor resets it to normal.
Any ideas?

Nope, I don't have a "/Users/charon/Library/Mobile Documents" directory, let alone anything underneath it. Is that like an iCloud thing or something? I tend to avoid the Apple-supplied services when I can (I don't use iTunes either unless I can help it).
As an update, as of about two days later this problem seems to have solved itself. Possibly sleeping and waking did something to it (though that seems unlikely given how many times I rebooted), or else there was just some long-*** kernel process that finally worked itself out. But my system CPU is back down to normal and the cursor freezes are gone.
??? it is a mystery! ???

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I have just bought a new Imac and it will not load my copy of FCE 3.5 as it says "PowerPC applications are no longer supported". So how do I get to use the version of FCE I am used to and have paid for ?

I do not have any experience with Final Cut, but if you have existing projects that you MUST access; then you are in need of a solution on your new iMac in Mountain Lion!
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. Purchase a used Mac that will run Snow Leopard (with the optional Rosetta installed) and continue to run FCE on that Mac (you can actually use Screen Sharing with a "headless" used Snow Leopard Mac Mini and use the 27" screen from your iMac to view and work FCE in the Mac Mini environment);
2. Upgrade to an Intel compatible version of FCE and hope it converts your existing projects to its newer format correctly. There is much debate that the newer version of Final Cut are eliminating many needed features; for example Final Cut Pro X vs. Final Cut Pro 6 -- many users are staying with version 6;
3. Install Snow Leopard (with Rosetta) into Parallels and then install FCE in the Snow Leopard environment:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

TS4253 I have over 100 photos, the unedited version of those photos is the only item that downloads onto Shutterfly or my computer. The Apple solution is to email each individual photo(over 100 of them)to yourself & then copy the image from the email Ser

I have over 100 photos, the unedited version of those photos is the only item that downloads onto Shutterfly or my computer. The Apple solution is to email each individual photo (over 100 of them) to yourself & then copy them to your computer? Really? This is the Iphone 5s, isn't it supposed to have great technology? It can't even recognize the photos on my iphone are all edited? Who has time to email over 100 vacation photos to get them correct? That is beyond acceptable from Apple.

Please read this article about how to go about transferring photos from iphone to computer.
http://support.apple.com/kb/HT4083

When its over 100% do the following actions

Hello,
We have a following script.
Purpose of this script is to received email notifications when FS /opt is over 90%.
PCT_USED=$(df -k /opt | tail -1 | awk '{print $4}' | sed 's/%//')
echo "Info:PCT_USED:[$PCT_USED]"
MY_THRESHOLD=90
if [ $PCT_USED -gt $MY_THRESHOLD ]; then
mail -s "/opt is Over 90% in TestNode 1" [email protected] < /home/oracle/FSwatch.log
mail -s "New Changes to the FS in Test Node 1" [email protected] < /home/oracle/NewFile.log
mail -s "Here are the Large files over 100MB from Test Node1" [email protected]
< /home/oracle/LargeFile.log
echo "Info:Sending Mail"
else
echo "Info: Usage [$PCT_USED] not greater than [$MY_THRESHOLD]"
fi
We get values from the cron job as below:
30 6,14,22 * * * ( date ; df -h / /opt /tmp /dev /bkup /var /usr /opt/oracle/clearcase_release /var/vobstore /wcmsrch) >> /home/Oracle/FSwatch.log 2>&1
45 6,14,22 * * * ( date ; find /opt -mtime -1 -ls ) >> /home/Oracle/NewFile.log 2>&1
50 6,14,22 * * * ( date ; find /opt -size +100000k ) >> /home/Oracle/LargeFile.log 2>&1
00 7,15,23 * * * /home/Oracle/callover90
Now I would like to add logic when its over 100% do the following actions.
1) send message to the users to contact system administrator
2) remove /opt/oracle/headdump/javacore (remove all javacore files)
How to add this logic?
D

I have added following logic in our existing program to find FS size, new files, size over certain numbers:
mail -s "Action1:Please remove javacore files" [email protected]< /home/oracle/action1
mail -s "Action 2:Please contact System Administrator" [email protected]< /home/oracle/action2
# more action1
Please remove javacore files from /opt/oracle/AppServer/profiles/AppSrv01
#Here is the command to remove all javacore files from the System, cd to above p
ath and run the command as
# rm javacore*
#more action2
Please contact System Administrator for further assistance
Do u have any better thought?
D

How am i able to use the same itunes account on a different ipod?

How am I able to use the same iTunes account on a different iPod?

By just using the same iTunes account. If you set up the iPod on your computer just make sure that iTunes is signed your account. Of settingup via wifi, just enter your existing account. Do not create a new one.

When I put a website Icon on my desktop, how do I make firefox use the Icon native to that website instead of the default Firefox Icon?

When I drag and drop a website onto my desktop, how can I make Firefox use the icon native to that website instead of the default firefox icon?
I have even gone painstakingly (SEVERAL TIMES) to the sites with IE, dragged the site onto my desktop in order to obtain the site native icons for my desktop (and deleted the ones with the Firefox icon) .... but they all soon revert to the default Firefox icon.
E X T R E M E L Y F R U S T R A T I N G !!!!!!!!!

I don't want icons from the Firefox library.
I want the icon that comes from the website I'm making the shortcut for.
(If you go to a site in IE you will see the site generated icon at the left end of the URL in the address field.)
If I make IE my default browser I am able to get (and keep) those icons as shortcuts on my desktop without a problem.
I want to keep Firefox as my default browser.
So I want to know how to make Firefox accept the icon that comes from the website like IE does.
I have even gone to the trouble to use IE to create the shortcuts with the site specific icons.....but after I do that...... FIREFOX CONVERTS THEM TO THE FIREFOX DEFAULT ICON as soon as I re-boot or refresh my desktop.
I generally prefer Firefox as a browser....but If there's no fix.....I'm going to dump Firefox.

How do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?

how do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?

Hi john,
Yes, you would sign out of iTunes & App Store: Settings>iTunes & App Store, click on the Apple ID, click on Sign Out. Then sign back on with the new Apple ID. Also, if you have an iCloud account with the other Apple ID, you would delete that iCloud account, and then sign on with your new ID: Settings>iCloud>Delete Account.
Cheers,
GB

How many times can you use the serial number to download the cd

help how many times can we use the serial number to download the cd photoshop elements 11

Download Photoshop Elements products | 13, 12, 11, 10
Mylenium

How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

How many times can i use the limited warranty on my Apple iPhone 5, I just broke mine after getting a brand new one. Also, can I extend my warranty?

If you purchased AppleCare + within 30 days of getting your iPhone 5 you are allowed 2 instances of breakage replacement with a $49 deductible. If you do not have AppleCare + accidental breakage is not covered under you warranty, you can do an out-of-warranty replacement for $229.

How come I can't use the back gesture in certain apps with my magic mouse on certain applications in Lion OS?

How come I can't use the back gesture with my magic mouse on certain applications in Lion? I figured out that in Safari i have to use a 1 finger swipe to go back a page instead of 2 fingers like i used to do in Snow Leopard. But apps like iTunes and iPhoto and i can't do that. Any ideas? is there a setting im missing to make this work? It works in Safari but not any other applications, so im assuming theres no setting for this. Just want to know if this is just a bug that will be fixed in the next update or if its something I can fix now. Any help would be appreciated because its kind of annoying. Other than this minor issue I love Lion. Full screen apps are unbelievable.

Hi.
I managed to compile open-vm-tools and the kernel module against 3.14.5 kernel. Here is the tarball with the all the files.
I still have an issue : With vmware-player 6.0.2, I can't acces my shared folder :
root@P146S011b ~ # lsmod | grep hgfs
vmhgfs 41622 0
vmw_vmci 47960 2 vmw_vsock_vmci_transport,vmhgfs
root@P146S011b ~ # vmware-hgfsclient
R
D
C
root@P146S011b ~ # mount -t vmhgfs .host:/R /mnt
Could not add entry to mtab, continuing
root@P146S011b ~ # tail -1 /etc/mtab
.host:/R /mnt vmhgfs rw,relatime 0 0
root@P146S011b ~ # cd /mnt
cd:cd:6: not a directory: /mnt
1 root@P146S011b ~ #
Forgot to add an install file with a depmod -a inside. You will have to run it by yourself

How do I find and use the "Spotlight Effect" in PS6?

How do I find and use the "Spotlight Effect" in PS6? I was using it yesterday and now I can find it ... help!

Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting.

Organizer 12 - how to: zoom over 100%, use the Trackpad, compare images?

Similar Messages

Maybe you are looking for