Organizer 9 often gets error adding keyword
I spent more than a week evaluating Organizer 9 for my use by playing with a test catalog with several raw photos from various cameras I have. I tried everything I could think of and posted here a few times asking questions. Everything seemed to be working well. I also saw posts saying some people had 100k photos in Organizer. All looked good. I wanted to be fairly confident before importing my 50k out-of-camera original photos and then spending a lot of time on adding keywords and star ratings since I didn't want to waste all that time and work if Organizer would not be a good fit for what I want or didn't work well. All signals were go.
A few days ago I got started on the real catalog. I turned off all the analyze stuff since I don't need it and it was likely to just slow the computer down. I imported about 50k photos. I then started adding keywords. I first made a pass through all photos and assigned a keyword for each photo that had the country or U.S. state where the photo was taken. No problems.
I then started another pass through all the photos adding one or two more keywords to some of the photos. I have been having problems with this though. I often, but not always, get a pop-up window with a message from Organizer saying it got an error adding a keyword to a photo. I click Okay and then Organizer hangs for several seconds and down at the bottom left of the screen it says Searching. Finally Organizer comes back, but now the thumbnail view doesn't show all the photos -- it shows only a subset. I then click Show all and then spend a lot of time scrolling into the 50k photos and looking for where I left off before the error. I then try to assign the keyword to the photo again and get the error again. I click okay again. This time it also says Searching for a few seconds, but when Organizer is ready again this time the thumbnail view has not changed so that is good. I then add the keyword and this time it works. Whenever I get the error the exact same sequence happens exactly like this with no variations:
1. Error adding keyword
2. Long wait with Searching shown in the lower left
3. Thumbnail view changes
4. I click on Show all and scroll down to where I left off
5. Again try to assign the keyword
6, Error adding keyword again
7. Wait with Searching shown in the lower left
8. This time thumbnail view didn't get changed
9. Try to assign keyword again and this time it succeeds
By the way, the error window I get says: Error Applying Keyword Tag(s). It always is this same sequence. Much of the time I get no errors and then I will get one and go through the above sequence. I often can do a few more with no error and then an error again. It seems to be random. Sometimes it might happen 2 or 3 times in a row and sometimes it takes a long time until it happens again.
I repaired the catalog, but it said there were no errors. I also optimized the catalog. Remember that I have just imported the photos and have been adding keywords. I have not actually made much use of the catalog. I have not been deleting or anything else. Just import and add keywords.
Any ideas? Thanks!
photodrawken wrote:
Where are the photos stored?
Where is the catalog located?
Are you running Windows?
How many drives on your computer, and how much free space on each?
Which drive are you using for your PSE scratch disk?
Ken, thanks for your reply.
The photos are on a 1tb USB 2.0 external hd. The catalog is on my computer local C: drive. I am running Win7 64-bit. The C: drive has 151gb free. The external hd has 245gb free. The PSE scratch disk is the default since I haven't changed anything, I suppose that would be the C: drive.
Adding keywords to all photos on the first round worked without problem. Adding one or two additional keywords to some of the photos on my second round works most of the time, but maybe about 20% of the time I get the error. The error always goes away after the above lengthy, very annoying sequence though and I can continue.
Similar Messages
-
PSE 9 Organizer Error Adding Keyword Tags and Other Woes
Hello, everyone. I am having a ton of problems with PSE 9 Organizer. The most frustrating and biggest problem is that I believe my catalog has been corrupted beyond repair. I spent all of yesterday tagging my photos. I had no problems and everything seemed to be going well until all of the sudden, the organizer suddenly froze up. I had to use the Windows task manager just to get it to close. This happened several times. Finally, the organizer locked up my computer and I had to restart. I opened the catalog and didn't seem to have any problems at that point. I was able to view all of the images, video files etc. I was even able to open the editor from the organizer. When I tried to add a tag to a photo it gave me an error. All it said was "error adding keyword tag" then nothing. I tried to delete the photo and all it said was "error deleting photo". This "error" shows up any time I try to make any changes to all of the images. I can't add any new photos, can't delete, or add tags. I have repaired the catalog several times. It found errors the first time, but evidently that didn't fix my problem. I also optimized and deleted my thumbnail cache to see if that was the issue. Still nothing. I have other catalogs and they work fine, so it is something to do with this particular catalog. Any suggestions on what to do next? Can I move the pictures to a new catalog without losing the tags? And no, I didn't write the tags to the images because I wasn't done tagging. Besides, PSE doesn't always write the tags correctly, as you probably know. Next problem. When I first open PSE and select the organizer, it doesn't alway open. I can see it on my taskbar (Windows 7 64 bit), but I can't get the window to maximize. I have to close and open several times to get the window to open. Sometimes it randomly jumps to my second monitor like it can't decide where to go. Very frustrating. I would appreciate any suggestions about what to do. Thanks.
Back to the original question, after thinking about this for a couple days I have had two ideas for workarounds:
1) Copy my tag names into the photo metadata and create a new catalog to bring all of my images into. This will allow me to keep all of my existing tags, and it MIGHT solve the tag display problem based on a test with a couple images in a new catalog. The downsides to this are a) permanently writes my tags into the photo metadata which will be bad if I decide to change something later, b) loses all version sets, and c) loses all albums (although I don't have that many). I found instructions for this workaround at http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Merging_Catalogs.
2) Live with the lack of color tag display in Organizer, and use reverse searches to find missing tag categories. For example, if I want to find all photos that do not have a "Places" tag, I check the box next to the "Places" category (which also selects all sub-categories and tags below this). Then I go to the Options drop-down in the Find Bar and "Hide best match results" and "Show results that do not match". This gives me every image in my catalog that does not have a tag from the "Places" category, so I can go through and tag these as appropriate.
I would have gone with #1 if it weren't for the permanence of the keywords. I guess I have a commitment problem (or I just haven't got my tag hierarchy figured out yet). Instead, I am going with #2 which should give me most of what I need for now. I will still hold out some small glimmer of hope that Adobe manages a fix for this issue down the road. -
See Inventory Organization Hierarchy, getting error APP-PER-50022
Hi friends
i need to see Inventory Organization Hierarchy. whenever i click Hierarchy in Inventory responsibility i get error APP-PER-50022. It says
Oracle Human Resource could not retrieve a value for the user type profile option. Please ensure it is it set property for your responsibility.
i have System Administrator responsibility. pls tell me what to do.
thanks in advancePl set the profile option "HR : User Type" - see MOS Doc 604432.1 (Error while setting up Inventory Organization)
HTH
Srini -
I am trying to open Cold Fusion files using Dreamweaver CC. We've never had a problem with the versions before the Cloud. My co-worker can open using a PC, but I'm using a Mac. I can connect to the server and see the files, but when I open, it opens the file in text editor. I have tried adding the extensions to the Extensions.txt file (they weren't there previously), editing the MMDocumentTypes.xml file (the file type WAS in that file), adding to the Preferences-->File Types/Editors (I can add the extension, but when I try to choose Dreamweaver CC as the editor, I get an error "You cannot use Adobe Dreamweaver CC as an external editor. Please choose a different application."). When I right-click the file, I do not see an "Open With" option, only "Open". Does anyone know of another trick that could make Dreamweaver CC more than an HTML editor for Mac? I cannot us CF Builder - no approval for loading the extra files server-side to use that IDE.
Have you tried these suggestions...
Open ColdFusion documents in Dreamweaver CC -
I keep getting errors adding toolbar or menu elements.
I receive a dialog box that says either "Error on adding toolbar element" or "Error on adding menu element" followed by ": NS_ERROR_UNEXPECTED Component returned failure code 0x8000ffff, (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id:". These dialog boxes occur in groups of ten.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
<br />
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br /> -
I am getting error from keyword not found where expected
I am unable to find the error in the following query... its giving from key word not found where expected
select ms.state_name,sum(decode(mp.status,'12',1,0)) cnt_active,sum(decode( mp.status,'12',mh.chargesheet_name,0)) sum_active,
sum(decode(mp.status,'18',1,0))) cnt_inactive, sum(decode( mp.status,'18',mh.chargesheet_name,0)) sum_inactive,
sum(decode(mp.status,'',1,'5',1,'16',1,'17',1,0)) cnt_expired, sum(decode( mp.status,'',mh.chargesheet_name,'5',mh.chargesheet_name,'16',mh.chargesheet_name,'17',mh.chargesheet_name,0)) sum_expired
from mst_pindetails mp,mst_batchno mb,mst_chargesheet_hdr mh,mst_state ms where mp.swhbatchcode=mb.swhbatchcode and mb.chargesheetno = mh.chargesheet_code
and trim(ms.state_id) = mb.statecode group by state_nameok working no problem
-
Why do I frequently get error message 408 when trying to open a page?
Recently Firefox has been running slowly and I often get error code 408 (browser did not submit a complete request in time) when I try to open a page. I have tried refreshing Firefox to the recommended settings twice, but this did not help.
Is this problem with some web pages, many, most?
Can you post a few links? No Personal Information Please !
https://support.mozilla.org/en-US/kb/server-not-found-connection-problem
https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message -
Elements 12; Error Applying Keyword Tag(s)
Elements 12; Getting "Error Applying Keyword Tag(s)" when trying to add a photo to an album
Many threads about that error message:
http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3347&rankBy=date&q=Error+Applying+Keyword+Tag%28s%29
For instance:
http://forums.adobe.com/message/5819207#5819207 -
I often get a "Page No Found" error when I click links.
After the last upgrade of Firefox, I am having problems with links in emails or websites. When I click them, I often get a 404 error, and the webmasters frequently say that they have tested the links and they are working fine. I am starting to think that is a browser problem, as the frequency of this issue is every day bigger. Am I wrong?... If I am not, please help me to fix it.
Thanks,
Monica
NOTE: I can't automatically add troubleshooting info, because the browse cut the communication after I click "allow". I did it manually.
Application Basics
Name: Firefox
Version: 33.1
User Agent: Lynx/2.8.5rel.1 libwww-FM/2.14 SSL-MM/1.4.1 GNUTLS/0.8.12
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports (including 2 pending crashes in the given time range)
Extensions
Name: Adblock Edge
Version: 2.1.6
Enabled: true
ID: {fe272bd1-5f76-4ea4-8501-a05d35d823fc}
Name: Bitdefender Wallet
Version: 2.0
Enabled: true
ID: [email protected]
Name: cliget
Version: 1.2.1
Enabled: true
ID: [email protected]
Name: EverSync - Sync bookmarks, backup your favorites.
Version: 5.0.1
Enabled: true
ID: [email protected]
Name: FireShot
Version: 0.98.63
Enabled: true
ID: {0b457cAA-602d-484a-8fe7-c1d894a011ba}
Name: IDM CC
Version: 7.3.88
Enabled: true
ID: [email protected]
Name: LastPass
Version: 3.1.1
Enabled: true
ID: [email protected]
Name: Personas Plus
Version: 1.7.3
Enabled: true
ID: [email protected]
Name: Random Agent Spoofer
Version: 0.9.3.1
Enabled: true
ID: jid1-AVgCeF1zoVzMjA@jetpack
Name: RightToClick
Version: 2.9.5
Enabled: true
ID: {cd617375-6743-4ee8-bac4-fbf10f35729e}
Name: Save as PDF
Version: 1.5
Enabled: true
ID: [email protected]
Name: Speed Dial [FVD] - New Tab Page, Sync...
Version: 6.6.3
Enabled: true
ID: [email protected]
Name: Translate This!
Version: 3.0.2
Enabled: true
ID: jid0-k75TfRGfOXPHfEZmJ9cKu5eCgLc@jetpack
Graphics
Adapter Description: NVIDIA GeForce GT 620
Adapter Drivers: nvd3dum nvwgf2um,nvwgf2um
Adapter RAM: 1024
ClearType Parameters: Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 400
Device ID: 0x0f01
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16492)
Driver Date: 9-13-2014
Driver Version: 9.18.13.4411
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Vendor ID: 0x10de
WebGL Renderer: Google Inc. -- ANGLE (NVIDIA GeForce GT 620 Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
accessibility.typeaheadfind: true
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.enabled: false
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.newtab.url: chrome://fvd.speeddial/content/fvd_about_blank.html
browser.places.smartBookmarksVersion: 7
browser.search.useDBForOrder: true
browser.sessionstore.restore_on_demand: false
browser.sessionstore.upgradeBackup.latestBuildID: 20141106120505
browser.startup.homepage_override.buildID: 20141106120505
browser.startup.homepage_override.mstone: 33.1
browser.tabs.closeWindowWithLastTab: false
browser.tabs.loadInBackground: false
browser.urlbar.maxRichResults: 15
dom.max_script_run_time: 0
dom.mozApps.used: true
extensions.lastAppVersion: 33.1
font.internaluseonly.changed: true
font.name.serif.x-western: Georgia
font.size.variable.x-western: 14
general.useragent.override: Lynx/2.8.5rel.1 libwww-FM/2.14 SSL-MM/1.4.1 GNUTLS/0.8.12
general.useragent.vendor:
general.useragent.vendorsub:
gfx.direct3d.last_used_feature_level_idx: 0
media.gmp-gmpopenh264.lastUpdate: 1413335128
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1416933906
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1416935696
places.history.expiration.transient_current_max_pages: 53650
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
print.printer_Canon_Inkjet_MP240_series.print_bgcolor: false
print.printer_Canon_Inkjet_MP240_series.print_bgimages: false
print.printer_Canon_Inkjet_MP240_series.print_colorspace:
print.printer_Canon_Inkjet_MP240_series.print_command:
print.printer_Canon_Inkjet_MP240_series.print_downloadfonts: false
print.printer_Canon_Inkjet_MP240_series.print_duplex: 1515870810
print.printer_Canon_Inkjet_MP240_series.print_edge_bottom: 0
print.printer_Canon_Inkjet_MP240_series.print_edge_left: 0
print.printer_Canon_Inkjet_MP240_series.print_edge_right: 0
print.printer_Canon_Inkjet_MP240_series.print_edge_top: 0
print.printer_Canon_Inkjet_MP240_series.print_evenpages: true
print.printer_Canon_Inkjet_MP240_series.print_footercenter:
print.printer_Canon_Inkjet_MP240_series.print_footerleft: &PT
print.printer_Canon_Inkjet_MP240_series.print_footerright: &D
print.printer_Canon_Inkjet_MP240_series.print_headercenter:
print.printer_Canon_Inkjet_MP240_series.print_headerleft: &T
print.printer_Canon_Inkjet_MP240_series.print_headerright: &U
print.printer_Canon_Inkjet_MP240_series.print_in_color: true
print.printer_Canon_Inkjet_MP240_series.print_margin_bottom: 0.5
print.printer_Canon_Inkjet_MP240_series.print_margin_left: 0.5
print.printer_Canon_Inkjet_MP240_series.print_margin_right: 0.5
print.printer_Canon_Inkjet_MP240_series.print_margin_top: 0.5
print.printer_Canon_Inkjet_MP240_series.print_oddpages: true
print.printer_Canon_Inkjet_MP240_series.print_orientation: 0
print.printer_Canon_Inkjet_MP240_series.print_page_delay: 50
print.printer_Canon_Inkjet_MP240_series.print_paper_data: 1
print.printer_Canon_Inkjet_MP240_series.print_paper_height: 11.00
print.printer_Canon_Inkjet_MP240_series.print_paper_name:
print.printer_Canon_Inkjet_MP240_series.print_paper_size_type: 0
print.printer_Canon_Inkjet_MP240_series.print_paper_size_unit: 0
print.printer_Canon_Inkjet_MP240_series.print_paper_width: 8.50
print.printer_Canon_Inkjet_MP240_series.print_plex_name:
print.printer_Canon_Inkjet_MP240_series.print_resolution: 1515870810
print.printer_Canon_Inkjet_MP240_series.print_resolution_name:
print.printer_Canon_Inkjet_MP240_series.print_reversed: false
print.printer_Canon_Inkjet_MP240_series.print_scaling: 1.00
print.printer_Canon_Inkjet_MP240_series.print_shrink_to_fit: true
print.printer_Canon_Inkjet_MP240_series.print_to_file: false
print.printer_Canon_Inkjet_MP240_series.print_unwriteable_margin_bottom: 0
print.printer_Canon_Inkjet_MP240_series.print_unwriteable_margin_left: 0
print.printer_Canon_Inkjet_MP240_series.print_unwriteable_margin_right: 0
print.printer_Canon_Inkjet_MP240_series.print_unwriteable_margin_top: 0
privacy.clearOnShutdown.cookies: false
privacy.clearOnShutdown.formdata: false
privacy.clearOnShutdown.sessions: false
privacy.cpd.formdata: false
privacy.cpd.offlineApps: true
privacy.cpd.sessions: false
privacy.donottrackheader.enabled: true
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.timeSpan: 0
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1415991586
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSMIME
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSSSL
Expected minimum version: 3.17.2 Basic ECC
Version in use: 3.17.2 Basic ECC
NSSUTIL
Expected minimum version: 3.17.2
Version in use: 3.17.2
Experimental Features
---------------------hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]] -
When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors. But if I boot off an external drive and check the same SSD, no errors are reported.
This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks). So far as I know, all of the kit I am using is in good order (despite the file corruption reports). So I am beginning to wonder if it could be due to a bug in Mavericks? Both SSD drives have been formatted to MacOS Extended (journaled) format. Should I have used a different format, I wonder?
Has anyone else encountered this issue?
Does anyone have a solution?
Or an explanation that might help my investigation of the issue?
Thanks guys,I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs.
I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try. -
just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen. When I click on it to reopen it doesn't and I get the same message again. I rebooted computer, still did it, I uninstalled and reinstalled the program and I am still getting the same error message. This is on Mac OS with yosemite. Any Ideas Please!!!
Thread 8:
0 libsystem_kernel.dylib 0x00007fff9219f4de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff9219e64f mach_msg + 55
2 com.apple.CoreFoundation 0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fff97716ffb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x00007fff97716858 CFRunLoopRunSpecific + 296
5 com.apple.AppKit 0x00007fff8e85533b _NSEventThread + 137
6 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
7 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 9:: cr_scratch
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 com.adobe.CameraRaw 0x000000012122478b 0x120c28000 + 6277003
2 com.adobe.CameraRaw 0x00000001211ad48b 0x120c28000 + 5788811
3 com.adobe.CameraRaw 0x0000000120fad001 0x120c28000 + 3690497
4 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
5 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 10:
0 libsystem_kernel.dylib 0x00007fff9219f4de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff9219e64f mach_msg + 55
2 com.apple.CoreFoundation 0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fff97716ffb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x00007fff97716858 CFRunLoopRunSpecific + 296
5 com.apple.CoreFoundation 0x00007fff977ccef1 CFRunLoopRun + 97
6 com.adobe.ols.library 0x00000001235ebc86 OLSHTTPTransaction::Execute() + 4166
7 com.adobe.ols.library 0x00000001236174f9 OLSServiceTask::PerformMessageExchangeServerPOST(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1849
8 com.adobe.ols.library 0x000000012360958a OLSServiceTask::PerformMessageExchangeServer(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1834
9 com.adobe.ols.library 0x000000012361626c OLSServiceTask::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 1804
10 com.adobe.ols.library 0x00000001235c885c OLSClientSession::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 124
11 com.adobe.ols.library 0x00000001235c6921 OLSClientSession::ProcessMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 2593
12 com.adobe.ols.library 0x0000000123608d3a OLSServiceTask::ExecuteStateMessageExchangeServer() + 426
13 com.adobe.ols.library 0x00000001236010cc OLSServiceTask::ExecuteInternal() + 1196
14 com.adobe.ols.library 0x000000012361b22e OLSTask::Execute() + 350
15 com.adobe.ols.library 0x000000012361c874 OLSWorkerThreadTaskManager::ProcessTasks(OLSTaskThread*) + 1300
16 com.adobe.ols.library 0x000000012361b454 OLSTaskThread::Run() + 36
17 com.adobe.ols.library 0x000000012363fd88 OLSThread::ThreadProc(void*) + 54
18 com.apple.CoreServices.CarbonCore 0x00007fff9c7108dc PrivateMPEntryPoint + 58
19 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
20 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
21 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 11:
0 libsystem_kernel.dylib 0x00007fff921a475a __sigwait + 10
1 com.adobe.ElementsOrganizer13 0x000000010dce1a84 0x10cc7e000 + 17185412
2 com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
3 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
4 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
5 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 12:: com.apple.NSURLConnectionLoader
0 libsystem_kernel.dylib 0x00007fff9219f4de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff9219e64f mach_msg + 55
2 com.apple.CoreFoundation 0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x00007fff97716ffb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x00007fff97716858 CFRunLoopRunSpecific + 296
5 com.apple.CFNetwork 0x00007fff8fcfac80 +[NSURLConnection(Loader) _resourceLoadLoop:] + 434
6 com.apple.Foundation 0x00007fff90df190a __NSThread__main__ + 1345
7 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
8 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
9 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 13:: com.apple.CFSocket.private
0 libsystem_kernel.dylib 0x00007fff921a43fa __select + 10
1 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
2 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
3 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 14:
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
2 com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
3 com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
4 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
5 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 15:
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
2 com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
3 com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
4 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
5 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 16:: JavaScriptCore::BlockFree
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 libc++.1.dylib 0x00007fff8fb2ad2e std::__1::condition_variable::__do_timed_wait(std::__1::unique_lock<std::__1::mutex>&, std::__1::chrono::time_point<std::__1::chrono::system_clock, std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000000000l> > >) + 126
2 com.apple.JavaScriptCore 0x00007fff99593aaa JSC::BlockAllocator::waitForDuration(std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000l> >) + 170
3 com.apple.JavaScriptCore 0x00007fff993828f4 JSC::BlockAllocator::blockFreeingThreadMain() + 84
4 com.apple.JavaScriptCore 0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
6 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 17:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 libc++.1.dylib 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2 com.apple.JavaScriptCore 0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3 com.apple.JavaScriptCore 0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
6 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 18:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 libc++.1.dylib 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2 com.apple.JavaScriptCore 0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3 com.apple.JavaScriptCore 0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
6 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 19:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff921a4136 __psynch_cvwait + 10
1 libc++.1.dylib 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2 com.apple.JavaScriptCore 0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3 com.apple.JavaScriptCore 0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff974c1268 _pthread_body + 131
6 libsystem_pthread.dylib 0x00007fff974c11e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x00007fff974bf41d thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x00000000000000b0 rbx: 0x00006080000b4460 rcx: 0x00007fff52f7da08 rdx: 0x00007fff52f7d8c0
rdi: 0x00006080001d31a0 rsi: 0x0000000000000000 rbp: 0x00007fff52f7d860 rsp: 0x00007fff52f7d830
r8: 0x00007fff52f7d9d8 r9: 0x00007fff52f7d9a0 r10: 0x0000000000000000 r11: 0x0000000110825b90
r12: 0x00007fff52f7d9a0 r13: 0x00007fff52f7e0e8 r14: 0x00007fff52f7d8c0 r15: 0x00006080000b4460
rip: 0x0000000110825ba6 rfl: 0x0000000000010206 cr2: 0x0000000000000000
Logical CPU: 1
Error Code: 0x00000004
Trap Number: 14 -
Unable to publish in Swf format. Get error message reads: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?
Hi There,
Can you tell me the Operating System and Captivate version you are using?
Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
Regards,
Mayank -
I'm using the PCI 6711 board programmed in Visual Basic. I'm working from the WFMDoubleBuf example file for VB and I've modified it for continuous output on 2 analog channels. I fill the buffers with customized waveforms from files I have previously created. I often get -10608 (noTransferInProgError, No transfer is in progress for the specified resource) and -10803 (transferStoppedError , The on-going transfer has been stopped. This is to prevent regeneration for output operations, or to reallocate resources for input operations) errors when I try to output at higher rates (about 140000samples per second and up). The -10608 error generally happens after seve
ral (sometimes hundreds) of half buffers have been transfered, whereas the -10803 error usually occurs immediately after starting output. This device is supposed to be able to output at up to 1Msample per sec per channel but I don't seem to be able to do that. I have tried increasing the buffersize (up to 16777216) with no apparent effect. Is there any other information as to what causes these errors or how they can be avoided. Any ideas?Roz,
I found two KnowledgeBase entries about the most common causes of these errors.
1. Why Do I Receive the Error -10608 When Using the PCI-6711?: http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/37752a79eb6a950886256c8b006e8870?OpenDocument
2. Why am I Getting the 10800 and/or 10803 Errors?:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/c9097c72463d215886256a700075a6ef?OpenDocument
Have a great day. -
I Often get Deployment Errors is it necessary to reinstall every time JSC2
Hi i am using JSC2 update 1, but i am not satisfied with this IDE, Because it often shows deployment error when i run my application and really it irritates me. Till Now i have downloaded and reinstalled it for Five times but it still showing errors. I am always busy with rectifying the errors in IDE rather than using it for developing applications. Even i have tried all possibilities to rectify it but it wont. Please can you suggest me a good IDE for developing Database based web applications. Its really tough to continue to work with JSC2 update 1.
Any help please i am really frustrated by using JSC2 update 1 IDE.Exception=Deployment error: Deployment timed out after 240 seconds.. See the server log file for details.
Deployment error: Deployment timed out after 240 seconds.. See the server log file for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:198)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:75)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:234)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:242)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:125)
Caused by: java.lang.RuntimeException: Deployment timed out after 240 seconds.
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.sleep(TargetServer.java:521)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.handleDeployProgress(TargetServer.java:932)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.handleDeployProgress(TargetServer.java:912)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.deploy(TargetServer.java:596)
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:188)
... 10 more
C:\Documents and Settings\SRNI\My Documents\Creator\Projects\MusicAdd\nbproject\build-impl.xml:491: Deployment error: Deployment timed out after 240 seconds.. See the server log file for details.
BUILD FAILED (total time: 10 minutes 2 seconds)
This is the error i often get and i always use to rectify it.
1) I have stopped my norton Antivirus software and restarted my sun java application server.
2) I have checked whether there is any port conflicts by typing netstat -a on command prompt. But it shows that 29080 is LISTENING. but when i try it will show again the same error.
3) i have checked for usernames and passwords also.
I was left with only one option that is if any application is corrupted or not , but i dont know how to check it.
can i use any other port no in place of 29080 or i have to use that port only. please help me Roman.
Thanking you in Advance. -
have added name to Sql server , users cannot access the report, getting error message ,
I have give all the permission to this users, so why this users still cannot look at the report,
and getting error message,
An error has occurred during report processing.
cannot create a connection to data source Ax live
for more information about this error navigate to the report server on the local server machine or enable remote errors.
can some please help me what this message means,
I really appreciate it
thanks In advanceIf "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question.
Maybe you are looking for
-
I have a text file that contains something like this: <setting name="ip_address" serializeAs="String"> <value>239.0.0.1</value> I want to be able to search through the text file and based upon finding <setting name="ip_address" serial
-
Hi all, I am having a system with 64gb ram with oracle 11g installed in it with solaris 10 as Operating system, i have assigned 16gb to memory_target with dynamic memory management, but the performance of the system not as expected can any guied me o
-
What is the audio in/optical audio port for ?
I scan thru my iMac manual & found that I have not use my audio in/optical audio port. What is that port for ? Can I connect a mic to it & do a voice over in FCE ? If yes, then is this a better method or using a USB mic is better ? Thnaks
-
WebSphere and TransactionRolledbackException Details
Hello everyone, we are currently using TopLink and WAS 5.1 to develop a "rich client" application with a Swing client. All database operations are performed on the server side within session beans using TopLink 9.0.4 and the WAS JTS transaction contr
-
Best way to export for archive, DVD
Hi, I'd like to export and "archive" my sequences, audio slide shows, (in anticipation of moving on to FCP X or whatever appears right in the next few months...) and have seen on this forum that i'm best using Quicktime, not QT conversion. For my i