Organizer (Bridge) won't connect to Android Lollipop

My carrier without my consent upgraded my LG G3 to Android Lollipop. Now Adobe Bridge won't connect to my device. After 1-2 minutes I get the Error code: c0000005 Address: abb6f3c
Is there an update on the horizon?

I came across this problem with my Galaxy Note 3. First I plugged into my phone and got the same error as you. When i plug my phone in, it says "connected as media device (MTP) ". On my phone, I clicked on that and changed it to "camera PTP". I tried it again and the files were able to download with no errors. Hope that helps

Similar Messages

Cannot Connect to Android Lollipop Device

My carrier without my consent upgraded my LG G3 to Android Lollipop. Now Adobe Bridge won't connect to my device. After 1-2 minutes I get the Error code c0000005 Addres: abb6f3c
Is there an update on the horizon?

I came across this problem with my Galaxy Note 3. First I plugged into my phone and got the same error as you. When i plug my phone in, it says "connected as media device (MTP) ". On my phone, I clicked on that and changed it to "camera PTP". I tried it again and the files were able to download with no errors. Hope that helps

Macbook Pro won't connect to Android Phone via Bluetooth (Tether)

I am trying to set up the "Tether" app that will turn my Android phone into a wifi hotspot. I have a Macbook Pro running 10.7.3.
I've done everything suggested in the Tether setup, for using an Android Phone with a Macbook.
Problem seems to be with Bluetooth. Using the Bluetooth setup assistant, I am able to successfully pair the computer and phone, or so it seems. The phone shows the pair, and the computer says yay, we're paired.
However when I exit the assistant, the phone is shown as "not connected" in the list of connected Bluetooth Devices.
I see from searching forums that there have been similar Bluetooth connectivity issues with audio devices such as speakers.
Has anyone been able to successfully troubleshoot?
Has anyone set up Tether successfully with a Macbook and Android phone? I have a Samsung Nexus S 4G. Yeah I know, time for an iphone. As soon as the contract is up in June.

I don't think you have to change anything on your home network. It is your MBP that is confused - it appears your computer is trying to connect to the network at your mother's place.
I suggest you go to System Preferences / Network and delete all the networks. (Select the name on the left and click -)
Then restart the computer and setup the network connection as if for the first time. You can use the Assistant to guide you.
(All of the above assumes you are running Yosemite. The details with older OS may be different, but the basic idea is the same for any OS.)

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this?

We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems. And the Wii did connect before the switch.

Hello and thanks for the reply. I gave this a try, turned off Airport on one of the computers and tried the Wii again. Still no connection. I should say that we're also running an old G4 (wired) off the Airport as well, with no problems. I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck. The Wii "sees" the Airport but won't connect to it. I'm at a loss for anything else to try, so any help is appreciated.

HP 6520 wifi won't connect

Just took a 6520 out of the box, trying to set it up/print to it from a windows 8.1 computer, after returning a 4620 printer that had the same problem.
Ran the setup software. Setup software can't even manage to figure out what wireless network the computer it's running on is connected to - useless.
Printer can find the wireless network, and when using the wrong password, won't connect, citing wrong password.
When I use the right password, it just fails to connect.
I've rebooted my router, rebooted my computer, rebooted the printer. No good. Print doctor software is useless as it can't even find the printer.
I've turned off MAC filtering on my router, and disabled Windows Firewall. Nothing.
I have an epson printer that has no problem connecting, and every other wifi capable device I own can connect to my wifi with no problem, from both Android and apple phones to tablets to four different PCs and laptops to my freaking nest thermostat. Why can't my printer manage to just work over wifi?
I do not have a USB cable for the printer (it wasn't sold with one), btw, so trying that is out (besides, I bought this as a wireless printer, not a wired printer).
Help please.

Hi MattMihaly,
Welcome to the HP forums!
I see you have a Photosmart 6520 and a Windows 8.1 computer that don't seem to want to talk to one another. I'm sorry to hear this, but I will certainly do my best to help!
I would suggest you start by following the steps for Windows 8 in this 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati... document (make sure to follow the Option two: Connect with the Wireless Setup Wizard under Step five). If that doesn't resolve it, please try the steps under Your printer has never worked over the network in the HP Wireless printing center.
I realize you may have tried some of these steps, perhaps all of them, before but often trying them in a specific order is what makes the difference
Let me know how this goes for you!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Time Capsule won't connect to anything

I was using my time capsule for about a year and never had an issue until I moved. Now that I'm in the new house, no devices will connect to it except my MacBook Pro. Hard wired LAN or over WIFI my smart TV won't connect neither will my PlayStation or my iPhones or iPad. Nothing. Again... My computer connects over WIFI but nothing else. And nothing works directly hooked up from the Time Capsule to any device via LAN cable.

TC needs a full factory reset when put in a new network.
It remembers far too much from the previous setup.
So.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Do do a new setup .. if the modem you have is cable pure type modem.. the TC must be in bridge.. you MUST turn off the cable modem for 20min for the MAC address capture to time out.. then power up the modem and power up the TC which is in DHCP + NAT mode.
If the modem is a router.. put the TC in bridge mode..
If you run into troubles give us more info.
what modem.. make and model and type.
What model is the TC.. A1xxx from the base.
What version firmware?

Tablet won't connect with static LAN IP address

Today I updated my Xperia tablet (model SGP311) to Android 4.4.2 (kernel version 3.4.0-perf-g32ce454).
My tablet no longer connects to my home wi-fi network if I assign it a static LAN IP address. It connects fine if I use DHCP. But I prefer to assign my devices static IP addresses when possible.
I have tried forgetting and re-connecting to my LAN several times without success. The static IP address worked fine until today's update.
Any ideas?

sunnhausl wrote:
I tried that already, too! New development...I have the same problem in my office now. So, clearly, it is a problem with my iTouch. It recognizes the networks, won't connect, and when I go into look at the network, there is not data (IP address, etc.) It's just blank. HELP!
You could try restoring the S/W on your iPod Touch. If that doesn't work you may need to talk to Apple about repair.

Bluetooth connection with android

So I've been trying to connect my iPhone 5c with my galaxy s3 to transfer some stuff over but it won't connect. It connects to my car and the speakers I use in my room via Bluetooth but it won't connect to any android phone. Is there a way to fix that or am I just SOL?

SOL, iOS devices do not have the BT File Transfer Protocol profile.

Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

Hello, I hope somebody can help.
I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
What could the problem be?

99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
Ring your ISP and make doubly sure you have exactly the correct username and password.
If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

My airport extreme shows a green light, but won't connect to the internet.

I have an airport extreme, and it stopped working one day, so I reseted it and it's not connecting to the internet now. It's showing a green light, however, it won't connect to the internet. I live in an apartment complex, so I don't have a cable modem. The router is directly connected to the wall via ethernet. I had the ports checked by connecting the ethernet cord directly to the computer, and the internet is working fine. I tried resetting the router, but it still doesn't connect.

Your problem is typical Yosemite network.. just reboot the Time Capsule.. no luck reboot the network.. do a restart in correct order.. modem.. wait 2min.. TC .. wait 2min.. clients.
No luck then do a full reset of the TC and setup in a way that Yosemite can cope with.
Start from a factory reset. No files are lost on the hard disk doing this.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 for basestation and TCwifi wireless name.
If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
Same thing applies to the Airport Extreme or the Express if used as router.. just replace TC in the instructions with AE.

I'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

i'm having trouble setting up my new 5s. it won't connect to phone service and my old phone is still getting all my messages

According to http://en.wikipedia.org/wiki/IPhone_5
the iPhone5 has 1GB of RAM, and internal storage of 16, 32, or 64GB.
It does not use SD cards.
Fake iphones are really Android phones using the skin of iOS6.
Click on the App Store icon. If it takes you to Apple's App Store, then it's a real iPhone.
But if you are directed to Google Play, then I'm afraid you've gotten a copy.

"another device is using the same ip address.." - iOS devices won't connect to AEBS wifi.

I've got a Motorola modem/gateway - 3360 from WalMart. I have the AEBS working in bridge mode connecting my iMac & Printer fine, but my iOS devices won't connect.
While troubleshooting & trying all types of settings, I was able to get EITHER the iMac or the iOS devices connected to internet, but not both at same time.
Then I noticed I am getting "another device is using the same ip address.." message.
I have changed the AEBS ip address & had been able to get either the iMac or iOS devices working depending on which ip address I use.
BUT now, all my iOS devices dont connect to the internet regardless of the ip address of the AEBS.
All my iOS devices see the network, and accept the network password, but they do not connect to internet, circle just keeps spinning...
Any assistance is GREATLY appreciated.
Thanks for any assistance,
Dave

It looks like may have to go back to square one and delete my network & set it up from scratch if I don't figure it out.
If you do go this route, I would like to make a suggestion for your consideration, and that is to assign static IP addresses to devices that are "permanent" on your network or ones you want to make sure can be reachable at all times. These (again) would be servers, routers, wireless access points, network printers/scanners, NAS devices, etc.
I would recommend the following IP addressing scheme as a baseline and you are certainly free to deviate in any way you see fit to meet your networking requirements:
Reduce the number of IP handed out by DHCP. By default, most routers will provide 100-200 private IP addresses within their DHCP leasing scope. The AirPort, by default, assigns 10.0.1.2 thru 10.0.1.200 via DHCP. Your Motorola may assign 192.168.0.2 thru 192.168.0.150. Either way, I would reduce this to no more than fifty (50) total which should provide you with plenty of addresses even if you are hosting gaming convention at your home.
I use the following IP address scheme for the "permanent" network clients:
Network Printers: 10.0.1.200 - 209
NAS Devices: 10.0.1.210 - 219
Wireless Access Points or routers reconfigured as bridges: 10.0.1.220 - 229
Servers: 10.0.1.230 - 239
With the "permanent" devices pre-assigned with static Private IP address that are outside of the DHCP range, you shouldn't ever get an IP address conflict again.

IP Address Is Duplicate and iPhone Won't Connect

Everything was working for last 2+ years, then my modem died yesterday. I replaced it, but can't get back to where I was. I ended up restoring network to factory settings and then doing connection.
I have AT&T DSL service. When setting up the connection with my AirPort Extreme, have Ethernet with Bridge Mode. I receive message that "another device on the network is using your computers IP address." I didn't have this issue when setting up 2+ years ago. So, I manually changed the IP address, but this caused a message about DNS not being correct, which I ignored, because this at least gave me access to Internet, and I didn't have to "borrow" from one of my neighbors unprotected networks. I have implemented WPA2 security (which I had prior to this also).
Issues I now have are:
- iPhone won't connect, and it did before all this
- HP Photosmart printer (which is wireless) also won't connect, as it did before
I assume that all my issues are from not configuring correctly, and that it revolves around the IP address conflict.
Any assistance?

You need to do a Factory Default Reset on the AirPort Extreme (AEBS) to clear out all the old settings and IP conflicts.
Pull the power plug on the AEBS
Hold in the reset button and while you continue to hold it in, plug the power back in to the AEBS
Release the reset button after 10 seconds.
Open AirPort UTility and set it up again to Create a wireless network.
It's easiest to click Continue and follow the guided setup.
Ignore the Double NAT message when/if it appears.
I know this works. I have the exact same equipment on my desk now.
Message was edited by: Bob Timmons
Message was edited by: Bob Timmons

When I try to connect to a link I receive the message "Search bookmarks and history" and FF won't connect to the link requested

When I try to connect to a link I receive the message "Search bookmarks and history" and FF won't connect to the link requested. VER FF 3.6.6. Windows7; 64 bit.

I have currently FF 3.6.8 running under Windows XP 32 bit. I am using Multiproxy Switch ver 1.33 add-on to switch between multiple proxies.
My FF starting page is http://www.google.com/ncr . When I start Firefox and the actually configured proxy is unreachable, I get the usual message that the page cannot be opened ("Try again"). Then I switch to another proxy or to direct connection. Normally the desired page (google) opens. But in case I switch the proxy before the error message appears, this grayed message "Search Bookmarks and History" appears instead of the URL in the URL input field and I have to retype the URL.
Remark: I would really like to have this function "Searching Bookmarks and History" available in Firefox, because I often do this kind of search and need 4 clicks to get there (Bookmarks-Organize Bookmarks-Bookmarks Menu-and then input my search criteria).

Why my Mac won't connect automaticly to Wifi from boot or when waking from sleep?

Hi!
I have 2TB Time Capsule with bridged WiFi.
When I reboot or wake up my MBP from sleeping it won't connect automaticly to my Home WiFi network. I allways need to connect by hand. This problem has been in the Os X Lion and Os X Mountain Lion.
Any other WiFi networks don't have this problem, only with Time Capsule.
Time Capsule has 7.6.1 software and also older software's had this exact same problem
My MBP is:
2.3GHz Intel Core i5
8GB 1333 Mhz DDR3
And the WiFi chip is:
Card Type: AirPort Extreme (0x14E4, 0xD6)
Firmware Version: Broadcom BCM43xx 1.0 (5.106.98.81.20)
Does anybody else run in to this kind of problem?
Oh and everything else with WiFi is working normally (Phones, iPad's etc even PC's =) )

I was having this same issue with a brand new 2012 MacBook Air after updating to Mountain Lion and using an AirPort Extreme. Most times waking from sleep would result in a lockup as the system would continously try to find my network (the WiFi menu would just keep cycling). After going to 10.8.1 it still continued so I started looking at other possibilities. I noticed that the security setting on my AirPort Extreme (current generation) was set to WPA/WPA2. I changed it to WPA2 and the problem so far (2 days in a row) has gone away.

Organizer (Bridge) won't connect to Android Lollipop

Similar Messages

Maybe you are looking for