'organizer does not support the colorspace in the file' PSE 9

Does anyone know how to fix th eproblem of PSE 9 Organizer not importing a jpeg picture because 'The organizer does not support the colorspace in the file', short of a reboot?
And no the obvious 'fix the colorspace' is not the solution. This has happened to me twice in quick succession. First it was one of a batch of photos all taken at the same time, with the same camera, with the same settings. I missed checking the first of the batch when downloading them to PSE, then when I came back to this photo after downloading the rest of the batch I got the colorspace error.
The second time it happened was when I deleted a file from the catalog (but not the hard drive) and tried to import the smae file (that was previously in the catalog0 and all of a sudden the colorspace is not good enough for PSE.
Actually when this happens PSE is not prepared to recognize the colorspace of any picture file (well ok, gif, png, jpg and psd) and a reboot is required.

Please open one such file in PSE9 Editor? Does it open fine. Do a save as if it does.
Another solution could be opening this file in IrfanView which is freely downloadable. Did you happen to edit these files in between? Sometimes, file headers get corrupt due to edits and hence Organizer or Editor refuses to open them. From my observation on this forum, opening the file in IrfanView once and doing a save operation there fixes the problem most of the times.
Thanks
Andaleeb

Similar Messages

The Organizer does not support the color space in the file

I just purchased and installed PSE 8 as an upgrade to PSE 6. My catalog correctly shows all of my existing images. However, when I try to import photos into the Organizer, I get a message that nothing was imported. The reason given is that "The Organizer does not support the color space in the file." This happens with photos taken on my iPhone as well as those from my Canon PowerShot A1100 IS. Any suggestions?
Here is my system information:
Elements Organizer 8.0.0.0
Core Version: 8.0 (20090905.r.605812)
Language Version: 8.0 (20090905.r.605812)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:/Documents and Settings/All Users/Application Data/Adobe/Elements Organizer/Catalogs/My Catalog
Catalog Size: 83.9MB
Catalog Cache Size: 459.8MB
System:
Operating System Name: XP
Operating System Version: 5.1 Service Pack 3
System Architecture: AMD CPU Family:15 Model:11 Stepping:1 with MMX, SSE Integer, SSE FP
Built-in Memory: 2GB
Free Memory: 829MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.65
Adobe Reader Version: 9.2
Adobe Acrobat Version: Not installed
CD and DVD drives:
J: (SONY DVD BUS: 3 ID: 3 Firmware: RW)

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Error when trying to re-mount a VHDx (the version does not support this version of the file format)

Hi,
I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
it tells me this:
No matter what I try, I can't mount it. Double clicking just says this:
Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start. The data contains the error code.
How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
Thanks for the help
Cheers
Maike

Hi Maike,
Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
In the meantime, check if destination partition is NTFS formatted.
Problem with Attach VHD function: The version does not support this version of the file format
http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Hi Mandy,
I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
So I consider this dealt with ;)
Thanks anyway!

I bought an iphone 5 in December. However my iPhone does not support 1700 HSPA . The current iphone 5 does. Is there any way I can trade my iPhone to get the current iPhone since they are both iphone 5?

I bought an iphone 5 in December. However my iPhone does not support 1700 HSPA . The current iphone 5 does. Is there any way I can trade my iPhone to get the current iPhone since they are both iphone 5?

No, you have to sell yours and buy the new iPhone 5 with the proceeds.
Please do not double post. Asking many times does not change the answer.
Message was edited by: ckuan

Folio Builder does not support proxy authorisation on the mac.

Folio Builder does not support proxy authorisation on the mac.
Which’s solution to connect ?

It does not work because the Folio Builder tries to connect to the proxy as "anonymous". I don't know any solution up to now... Anyone?

Your organization does not support this version of lync

Hi.
Have - Lync 2013 server.
Connect from Lync 2010 mobile clients - all ok.
Try to connect from Lync 2013 mobile clients - can't.
Write - your organization does not support this version of lync.
Please, help.
Thanks.

Hi there,
Lync Mobile Client 2010 connects to lync server using mobility services, where lync Mobile client 2013 requires the Unified communications Web API to be active in order to connect.
UCWA and Mobility services are part of the CU1 for Lync server 2013 therefore you should make sure that you have applied at least CU1 and followed the installation instructions properly in order to make sure that Lync 2013 mobile clients are able to connect.
here are some resources to help you
This one contains January 2014 updates
http://support.microsoft.com/kb/2809243
This is a detailed article for the installation process
http://www.zerohoursleep.com/2013/07/lync-server-2013-cumulative-updates-cu2-july-2013-installation-workflow/ although it is written for CU2 it can be used for any cumulative updates
Regards,
Charbel Hanna
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Webelements : does not support when i add the data sourcce& view in HTML

hi Masters,
i am using sap crystal reports 2008 and when i add the data source and add tables to the report and i use web elements functions as my selection screen then it does not show i mean the script remains as it is and when i take out my data source
then it works when i view it in HTML VIEWR.
how can i make it to work despite me using the data soruce.
thank you,
pasala

hi Pasala,
this is due to the sap integration kit which does not support pass-through html. webelements require pass-through html in order to show up as html.
here's what you can try though:
1) install the latest sap integration kit on your boe system machine(s)
2) if the above does not solve the issue follow the steps at the bottom of [this thread|WebElements: HTML not rendering when using Bex Query as Source]
3) if 2 above doesn't work then see [this thread |Re: WebElements only show HTML tags (even after following WebElement guides)]as a last resort
hopefully step 1 & step 2 will solve the issue.
jamie

My Satellite A100 does not support SDHC cards with the internal card reader

Hi,
My satelite A100 does not support my sandisk 4 GB SDHC card.
"normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
is there a software solution?
regrads,
Itock

I do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available.

The Exchange organization does not support this version of exchange - EXCHANGE 2010 on 2008 R2

Hi,
I am currently trying to install 2010 exchange on 2008 R2 after an unsuccessful run with 2013 install.
I am getting this error with the readiness checks.
I have uninstalled 2013 exchange and removed the folders in /Program Files but it seems that it is still picking up the 2013 install.
Is there something in AD that i need to delete so it forgets about 2013?

Hi nikala,
Thank you for your question.
I agree with Hinte. So if we want to install Exchange 2010 on present organization, we could recover the AD to time which is before to prepare AD schema for Exchange 2013.
I suggest we post error information when we install Exchange 2013 to
[email protected] for our troubleshooting.
In addition, there are a link for us to deploy Exchange 2013 on Window server 2008R2:
https://technet.microsoft.com/en-us/library/aa998636%28v=exchg.150%29.aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Firefox RC does not allow me to use the zoom in and zoom out function on Apple Touchpad

A couple of weeks ago, I tried out Firefox 4 Beta version, but soon I realized that Firefox 4 Beta does not support certain functions of the multi-touch pad, of the Apple Macbook I bought in 2010. The two finger scroll works. The three finger swipe to go forward or back in the web browser also works. But what does not work, is the two finger zoom in and zoom out function.

In the address bar type without quotation "about:config" then hit enter. Be careful about what you type. I would suggest copy/paste.
Scroll down to
"browser.gesture.pinch.in"
right click and in the small window under value type without quotation "cmd_fullZoomReduce"
Scroll down to
browser.gesture.pinch.in.shift
right click and in the small window under value type without quotation "cmd_fullZoomReset"
Scroll down to
browser.gesture.pinch.out
right click and in the small window under value type without quotation "cmd_fullZoomEnlarge"
Scroll down to
browser.gesture.pinch.out.shift
right click and in the small window under value type without quotation "cmd_fullZoomReset"

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

Lumia 1520 does not support Bluetooth Keyboard (HI...

I would very much like to buy a Lumia 1520 as it would spare me from carrying both a phone and a tablet.
However, I am not going to as, for reasons which utterly defeat me, the Bluetooth stack does not support a keyboard. The HID (Human Interface Device) aspect has not been included.
I am utterly baffled by this simple omission. From my Nokia N95 through to my N8 I was able to use a keyboard. I even still have a Nokia one which folds.
Would someone from Nokia be good enough to:-
a. let me know why this bit of simple but basic functionality has been left out?
b. when, if ever, it is likely to be included in an update?

Agreed on all points -
1. Lack of HID support is a glaring omission that needs to be fixed
2. Microsoft is responsible for omitting HID support (which existed in Windows Mobile 6.5!)
3. There is hope for the future when Nokia/Microsoft collaboration is tighter after the merger.
As mentioned above, a WP device can see a bluetooth keyboard - it can even perform the pairing handshake. It generates a random code, you enter the code on the BT keyboard, the two become paired. But then nothing.
I can add a little insight to this conversation: If you were to ask Microsoft folks, the answer would probably go something like this: "We have a finite number of resources. So to support one feature, we'd have to cut something else. What feature would you be willing to lose in exchange for HID support?"
I am basing this on similar conversations I've seen on MSFT discussion boards about support for entire-device backups - not piece-meal app-supported "in the cloud" data storage, but total backup/restore functionality.
I personally think it is embarassing that Windows Phone does not support the HID profile. I know we're getting close. The code is already on Windows RT for tablets. So I sure hope it's in the pipeline for WP. Time will tell I suppose.

IChat - Host does not support Kerberos authentication

Hi all,
I have been trying but with no success to set up an iChat server on 10.6. Our OS X server is bound to AD and will hopefully be using AD to authenticate the iChat clients. I have followed Apple's guide on commenting out the  section of the c2s.xml file which hasn't solved our problems. Open Directory isn't running as a master it is connected to another directory (our AD directory), and as a test I set up a Wiki server on the same box and this does allow us to authenticate against AD.
The error message we are receiving in iChat is "The host example.com does not support Kerberos authentication. The client is set to use Kerberos, the username format is [email protected] all I think the correct settings.
Under iChat General Settings on the server the Host Domain is example.com, SSL Certificate: No Certificate, Authentication: Any Method, and Enable XMPP server-to-server federation is enable for all domains.
This is our jabber fullstatus:
jabber:state = "RUNNING"
jabber:readWriteSettingsVersion = 1
jabber:logPaths:PROXY_LOG = "/private/var/jabberd/log/proxy65.log"
jabber:logPaths:MUCSTDLOG = "/var/jabberd/log/mu-conference.log"
jabber:logPaths:JABBER_LOG = "/var/log/system.log"
jabber:proxyState = "RUNNING"
jabber:currentConnections = "0"
jabber:currentConnectionsPort1 = "0"
jabber:currentConnectionsPort2 = "0"
jabber:pluginVersion = "10.6.100"
jabber:serviceMode = "CHATSERVER"
jabber:domainName = "example.com"
jabber:mucState = "RUNNING"
jabber:servicePortsAreRestricted = "NO"
jabber:servicePortsRestrictionInfo = emptyarray
jabber:hosts:arrayindex:0 = "example.com"
jabber:setStateVersion = 1
jabber:startedTime = "2010-10-07 16:12:01 +0100"
jabber:jabberdState = "RUNNING"
This is our changeip -checkhostname:
Primary address = 192.168.1.20
Current HostName = ichat.example.com
DNS HostName = ichat.example.com
The names match. There is nothing to change.
dirserv:success = "success"
Any help with this would be much appreciated, and I can supply further logs details if needed. I have used example.com to protect our domain name but i kept the format identical.
Cheers,
Chris

From the console:
08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16a16a].com.apple.iChat[2873]) The USER environmental variable changed out from under us!
08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16a16a].com.apple.iChat[2873]) In a future build of the OS, this error will be fatal.
08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16b16b].com.apple.iChatAgent[2875]) The USER environmental variable changed out from under us!
08/10/2010 13:00:52 com.apple.launchd.peruser.2027651558[416] ([0x0-0x16b16b].com.apple.iChatAgent[2875]) In a future build of the OS, this error will be fatal.
08/10/2010 13:00:52 iChatAgent[2875] [Warning] JConnection: Error: Error Domain=XMPPErrorDomain Code=122 UserInfo=0x10020b680 "The host corepublishing.co.uk does not support Kerberos authentication."
The iChat server log shows this at the same time:
Oct 8 13:00:52 ichat jabberd/c2s[1051]: [7] [::ffff:192.168.2.170, port=50624] connect
Oct 8 13:00:52 ichat jabberd/c2s[1051]: [7] [::ffff:192.168.2.170, port=50624] disconnect jid=unbound, packets: 0

Confirmation that 5.0.2 does not support MIPS

Hi,
Can any one confirm that the latest version of 9i Lite (5.0.2) does not support MIPS processors on the handheld devices.
Thank,
Michael Bayings

https://discussions.apple.com/message/21546508#21546508 check this out

'organizer does not support the colorspace in the file' PSE 9

Similar Messages

Maybe you are looking for