Organizer Timeline - Does not go to first picture in a chosen month.

Hi.
I have recently bought Photoshop Elements 8, after using version 4 for years.
Question - Why, in Organizer, while displaying the Timeline at the top of the screen in 'Date (Oldest First)' order with thumbnail view & I click on any month in the timeline, it doesn't go to the first picture in that month, either when showing 'all' or while filtered on a tag, as it used to in Version 4?
It could flash on a picture at any point in the month, rather than the first, but it seems constant as to which picture it goes to for a specific month.
Any help appreciated.

The problem mentioned above still seems to be present in PSE13. I find this so frustrating that I am considering abandoning the organizer in spite of having 14000 organised and tagged photos in my catalog. SURELY there must be a fix to this problem!

Similar Messages

  • Premiere Element 13 The progress bar on the lower right for Indexing has frozen and when asking to open a video file in the organizer, Premiere does not open.

    The above says it all.

    I can't really answer you first question. What has happened is: when I moved an mpg file from my assets to the movie (I have added already a mpg file in the first part of the movie) a message box appears telling me the file is being "indexed" and then this Indexing progress appears in lower right of screen and it processes up to 99% and then freezes. The file appears in the time line, but the frame appears that says "media pending" and then nothing happens. I can go into the Widows media player and the mpg file plays okay, with audio. That is best I can tell you.
    Though I did not say this earlier, when I try to open this mpg file from the Organizer, Premiere does not open.
    My operating system is Windows 7 on a Dell computer with lots of ram and plenty of space on my hard drive.
    Properties of movie file
    These properties are the same as a file I already inserted in the timeline.
    I look forward to your help and thanks..
    JC

  • ITunes does not recognize my first generation iPod Shuffle

    iTunes does not recognize my first generation iPod Shuffle (512MB).  Windows 7 sees the iPod as an empty external drive although the iPod has music on it.  The iPod plays the music fine.  iTunes does recognize a similar first generation iPod Shuffle.
    What can be wrong with the iPod Shuffle?   How can I fix?
    Thanks,I
    Jay

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    -Griff W.

  • "Organize Bookmarks" does not appear under Bookmarks menu, even though Help advises to go there.

    I've needed to eliminate Bookmarks. Because I have no "Organize Bookmarks" or "Manage Bookmarks" option under the Bookmarks menu, I've tried dragging bookmarks off the list onto my desktop. I've tried right-clicking to get a "delete" option (but there is none). I've gone to "Help" where I'm advised to click on the Bookmarks menu item, select "Organize Bookmarks," and proceed from there. An image of the items in "Organize Bookmarks" appears in this "Help" instruction. BUT -- "Organize Bookmarks" does not appear when I click the Bookmarks menu item.

    That menu item was changed to '''Show All Bookmarks''' in Firefox 4.0.

  • I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

    I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

    And I cant work out why all of my pictures are not diplaying in iphoto?
    Is this iPhoto on your Mac?  Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11?  If so then apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
    Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
    OT

  • Premiere 1.5 to CS4 - timeline does not display previous setup PLEASE

    New to the forum:  (Had to upgrade SW; Updated to VISTA.  Premiere 1.5 would not reload.)
    Opening older Premiere 1.5 files into Premiere CS4.
    After relocating all the files, the timeline does not show the videos, audios, cuts and oranization that was previously done in Premiere 1.5.
    Nothing is in the timeline.
    What can be done?   PLEASE Help
    Thanks

    Double click on the imported sequence in the Project Window.
    PS: welcome to the forums.

  • IOS 7 - Does not allow to resize picture

    IOS 7 - Does not allow to resize picture to its original size when setting the picture as a wallpaper.    Please test and verify software before release.  This seems like a pretty silly mistake.  Fix this wallpaper resize issue and release new OS.

    While you are waiting for the fix, have you tried this User Tip? It might work on your phone too:
    Fix for wallpaper scaling in iOS 7 on retina display iPads  https://discussions.apple.com/docs/DOC-6261

  • Does not look like the picture on your site. i have xp professional

    i downloaded ff v.4, but it does not look like the picture on your website. lots of missing components/tabs?
    i use windows xp professional.

    The orange Firefox menu button is hidden by default on Windows XP.<br />
    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance.<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
    You can place the Tab Bar on top.
    * View > Toolbars : [ ] Menu Bar
    * View > Toolbars : [X] Tabs on Top

  • Timeline does not show any pictures

    I have a HP computer with 1.2 TB and 8 MB memory Intel Core I 7 64 Bit. There is no problem importing from my DV Camcorder and the video plays well and the cursor line moves along the timeline.
    The problem is that there is only a black box showing on a small part of the timeline. No pictures at all and it refuses to expand out like it should so I cannot edit anything.
    I have been using PE for a number of years (and versions) but this is a new problem. The opening potion of the 11 version is not as intuitive as the 10 so perhaps i did something wrong at the advanced edit stage.
    I tried importing the approximately ten minute movie with one of the automatic movie makers in Adobe and that worked well but I want to edit my own movie and can't.

    Hi ATR and thanks for your assistance. Here is my response to Bill. I don’t think you need a screen shot now and also, I do not know how to do one anyway.
    Regards,
    Alan
    Hi Bill,
    Thanks for the prompt response.
    1                     I couldn’t find the place in the video track header with anything about thumbnails.
    2                     The video card is an AMD Radeon HD 6450 1GB. I updated the drivers.
    3                     I uploaded the video again from the camera.
    4                     At the beginning of the upload I get the message – “Your current camera setting is different from your project setting. Results may not be optimized. Click here to learn more”.
    5                     That just took me to the whole HELP screen and I cannot find anything there about the settings etc. It does not say where to find the information it is supposed to be guiding me to. I just clicked OK on the original message and continued on.
    6                     It started uploading the video ( I had left it to split the video at the pauses) and then stopped with the message – “unknown error” – ( I used to get that with older versions of PE too) I just clicked “OK” than it analyses the clip and away it goes again for a short while until I had to repeat the process, over and over again. This for a 12 minute video.
    7                     After that the upload appears normal and – although there are blank spaces in the expert timeline – the clips go all the way to the end, The movie plays but stops along the way. The stops at the last playing were at 30secs -1min 20secs – 3 min 12 secs – 7 min 28 secs – and 11 min – 44secs.
    8                     This was after I tried rendering it but I don’t think that happened because nothing told me it was rendering or that it had rendered. Also it seemed to start rendering – the cursor started moving along the timeline – but it only got just over 1 minute along the timeline and then shot back to the start. I tried 4 or 5 times and gave up.
    9                     I now have a semi workable video
    10                 I also had a response from ATR with a couple more questions which I will also answer here. I was working in “EXPERT” and have windows 7 – 64bit.
    Alan

  • TS3274 Camera does not save photos to picture roll

    I snap pictures and shoot video but it does not save to "Photos" camera roll.  This is a newly restored IPAD since I broke the screen on my old one.  Everything worked as expected on old one. I have everything "on" under privacy.

    If you are sure that all privacy settings are correct including anything in Photos in restrictions, did you try quitting the camera app and rebooting the iPad?
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Ark in KDE 4.8.1 does not want to show pictures

    Hello! My Ark does not show the preview of selected picture in archive.
    To see some picture, I have to unzip it first. Also, Gwenview works fine and installed.
    What can be wrong? Thnx
    Last edited by awesomenickname (2012-03-19 17:16:41)

    Sounds like a question for Microsoft...

  • TS3116 After updating, apple TV does not work. A picture is one TV screen which ask to use mini USB.

    Hi... I am not sure what generation I have
    After updating, I does not start at all, no light signal.
    Just picture show to me to use mini USB for Song logo.
    How can I do?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Weekdays option in alarm does not correspond to first day of the week option in calendar

    I am based in Oman where the week is Saturday to Thursday and Friday is weekly off instead of Sunday. Inspite of changing first day of the week to saturday in calendar option and choosing weekdays option in Alarm, it rings on Fridays and does not ring on Sundays. Its very upsetting. Can anyone suggest a solution for this?? Thanks in advance.

    i just did this on my Blackberry curve 8330 to make sure my answer was correct, and what i was able to do was.
    Go to your calender, select the first day you would like it to start i i will start monday for example, Recurrence set to weekly. when selecting weekly another option will appear below it ( S M T W T F S ) highlight and select a letter that marks the day  Saturday , Monday , Tuesday Ect.  and the letting will become BOLD meaning it is selected. Thus giving you the option to select any , and as many days per week you wish, and have the recurrence as often as you want

  • How can i change the lync settings so that the body of the conversation does not pop up first?

    Hi, when my colleague gets an IM, she does not see "xxx is inviting you to a conversation" but the conversation  itself pops up on her screen. My Lync does not do that, i get the invite first. We have gone through all settings and hers are exactly
    the same as mine. Question is could this be down to some other Microsoft Outlook settings for example?

    Hi,
    It looks like there is not setting about it in outlook for example.
    How do you fix the issue in lync side? 
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Elements Organizer 9 does not install with PS Elements

    I have installed Photoshop Elements Version 9 on a Windows 7 64 bit system. Photoshop Elements installs and works good... but the Organizer does not install and of course will not load either. I have uninstalled installed and reinstalled several times... still no luck.
    I can tell it is not installed because when I look in the Program Files (x86) under Adobe... the Photoshop Elements 9 folder is there but the Elements Organizer 9 is not there.
    How can I get organizer installed?
    Thanks...
    Rod

    Follow the below link, remove all the entries for PSE 9 from the machine and then try to install again. This time the organizer should get installed.
    http://kb2.adobe.com/cps/859/cpsid_85966.html
    Regards,
    Ankush

Maybe you are looking for

  • How can I transfer files from my macbook pro hard drive to another target drive

    The hard drive on my Macbook is corrupted and so I am trying back up files from the hard drive on my Macbook to a target disc so that I can wipe the hard drive on my Macbook and re-install the system software. I am only able to access the Macbook via

  • Bizarre-My saved changes keep disappearing

    I have separate domains in a folder, a system that has worked for me for over a year. Yesterday I did work on a school support site and a new school site for my district. Both are (site name) Domain 2.xsites 2. When I reopened the sites, any changes

  • Create iPPE data in APO

    Hi everybody, We have ECC 6.0 system and implementing APO 5.0. We realized that Model Mix Planning meets the production planning requirements. However, we do not have DI system (which uses iPPE data). Is it possible to create iPPE data directly in AP

  • Urgent - need help, Powerpoint images require quicktime???

    Hi guys, I'm a lecturer and I prepared a powerpoint on my G5 to show to students last week. the text loads on the Dell PC they have in the classroom, but the images come up with a message "requires Quicktime and a decompressor". As far as I know thes

  • Suggestion for appropriate Battery for Compaq 610 model

    Hi I am using HP compaq 610 model. I have to replace my battery. I read your HP_NB_Battery_Compatibility_Chart pdf file.But I could not find my model no. in this pdf. So could you suggest me which battery should I purchase? Thanks in advance.