Organizing podcasts that have been dragged and dropped
I normally get my podcasts thru iTunes, so they are nice and organized in the Podcast section of iTunes. But I've just started getting some non-iTunes podcasts and can't figure out best way to organize.
Most of the podcasts are episodes from a series or program, but when drag and dropping them into iTunes, they show up as individual podcasts. Is there a way to create a show that nests the episodes, as iTunes does when downloading from the iTunes Store? For instance I have NPR Fresh Air and within that menu there are all the episodes, but they are nested under Fresh Air. Is there a way to create a program that I can then put episodes into?
If I already have a a program listed in iTunes (again, NPR Fresh Air) with episodes nested under that listing, is there a way to Add episodes to that listing that were NOT downloaded thru iTunes (I have some episodes my wife downloaded directly thru the NPR website).
I'm on iTunes 9.
Many thanks!!
Hi,
Please send several test emails with attachments on OWA, check if this issue will occur.
If the issue is on client only, we can start Outlook in Safe Mode to test, this can eliminate the influence by 3rd-party add-ins:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
In Outlook Safe Mode, send several test emails with attachments to see if the problem will ever occur. If no, we may suspect the issue was caused by some add-ins, go to FILE -> Options -> Add-Ins to disable the suspicious add-ins to verify which one
caused the problem.
We can also test with a new profile to setup the account, a new profile will be a new environment for the account, we can check if the problem will occur with the new profile and you don't need to remove the old profile.
To create a new profile, go to Control Panel -> Mail -> Show Profiles -> Add.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Similar Messages
-
Outlook 2010 with 365 stripping attachments off of email that have been drag and dropped
In my office we just switched to 365 and since this I've noticed that roughly 1/3 to 1/2 of my email with drag and drop attachments are having those attachments stripped off.
Several times a day I send an email that has 6 attachments, mix of excel and pdf, and the excel called 'Checklist' I attach by drag and drop often get stripped off the instant I hit the Send button.
I will literally be looking at it, as one of 6 files, hit Send, and in my sent box there are only 5 files, the Checklist is gone! It's random; about 1/3 to 1/2 of them do this. Others make it through.
Please let me know if there is a fix to this? I'm having to resend attachments about 6 times a day now!Hi,
Please send several test emails with attachments on OWA, check if this issue will occur.
If the issue is on client only, we can start Outlook in Safe Mode to test, this can eliminate the influence by 3rd-party add-ins:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
In Outlook Safe Mode, send several test emails with attachments to see if the problem will ever occur. If no, we may suspect the issue was caused by some add-ins, go to FILE -> Options -> Add-Ins to disable the suspicious add-ins to verify which one
caused the problem.
We can also test with a new profile to setup the account, a new profile will be a new environment for the account, we can check if the problem will occur with the new profile and you don't need to remove the old profile.
To create a new profile, go to Control Panel -> Mail -> Show Profiles -> Add.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!
See this -> http://support.apple.com/kb/HT2727
-
Is there a way to import images that have been edited and assign them to the original?
I am transitioning to mac and aperture. Is there a way to import images that have been edited and assign them to the original? I have 10,000 originals and about 2,000 edited images. The originals are named img_XXXX and anything modified img_XXXX_modified. I would like to be able to import the originals and then import the edited versions and assign them to the original masters. Instead of starting from here and going forward with 12,000 masters, some of which are actual originals and others not. Thanks for the help.
Ah, the vestiges of a destructive workflow! Once you "get" Aperture, (specifically Masters and Versions) you are going to love it, as all of this work goes away - the relationship that you seek to retain is automatic in Aperture; it is simply done differently.
The short answer to your question is EVERY image file that is Imported into Aperture will create a new Master and one Version. Assuming that your images are PSD/TIFF/JPEG that you created in something like Photoshop, then each one that your import will be a new Master. You have many options:
-- Stick the originals in one Project(s) and the edited versions in another Project(s).
-- Stick them all in the same Project(s) and "Stack" them.
But here is the real question: Why are you doing all of this work and what are you trying to accomplish? Seems you are trying to preserve old things that don't need preserving in a non-destructive workflow.
So, what is most valuable to you?
-- The original, out of camera files? (That is, the fear/need to revert.)
-- The edited versions? (That is the hours of work that it took you to get there.)
If the former, import the originals and ignore the edited versions. (Either simply leave them out on disk or import them into their own Projects which you ignore.) Use Aperture to recreate the work you had done previously. This will always give you the ability to revert to the original Master and create as many Versions as you want. This is the best idea if your edits are relatively simple crops and exposure adjustments,
If the latter, then import the edited versions and do as above with the originals. This makes more sense if your work uses lots of layers and, perhaps lots of clone tool type corrections.
Of course, you can do a bit of both.
Others may have better suggestions, but you will find it easy to answer your own question when you understand an image based, as opposed to a file based, non-destructive workflow.
Good luck! -
Is there a way to print something showing all the purchases that have been made and what the total cost is?
While it is not possible to directly print your iTunes account purchase history within the iTunes Store, you can take a screnshot of your purchase history on your computer, and then print that screenshot.
The following article explains how to review your purchase history:
http://support.apple.com/kb/HT2727
This articles explains how to take a screenshot on Mac OS X:
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26782.html
and this does on windows:
http://windows.microsoft.com/en-CA/windows-xp/help/setup/take-a-screen-shot -
How can we restrict the type of components that can be dragged and dropped from the sidekick CQ
how can we restrict the type of components that can be dragged and dropped from the sidekick CQ
Generally drop the components at parasys. The components allowed on the parsys is control via the design mode of the page.So restrict components at the design of the parsys. http://dev.day.com/docs/en/cq/current/wcm/working_with_cq_wcm/using_edit_designandpreviewm odes.html#Design%20Mode
-
I have tried dragging and dropping and have also tried creating a file called iPhone.
Maybe you should read the manual:
iPhone User Guide (For iOS 5.0 Software)
If you want to drag and drop, then check the Manually manage music box. Otherwise sync your content. -
Using MouseMotionListener in order to have a drag and drop effect
Hello,
How is the exact syntax in order for the following code to work even for Drag and Drop effects of the drawn figures.
package tpi;
import java.awt.*;
import java.awt.event.*;
public class Desenare extends Frame{
private Panel selPanel;
private Choice sel;
private Choice fond;
private Choice lista;
private MyCanvas canvas;
public Desenare(String titlu){
super(titlu);
selPanel = new Panel(new GridLayout(6,1));
Label label1 = new Label("Culoare");
sel = new Choice();
sel.addItem("Alb");
sel.addItem("Albastru");
sel.addItem("Verde");
sel.addItem("Negru");
sel.select(0);
Label label2 = new Label("Figura");
lista = new Choice();
lista.addItem("Dreptunghi");
lista.addItem("Linie");
lista.addItem("Cerc");
lista.select(0);
Label label3 = new Label("Culoare Fond");
fond = new Choice();
fond.addItem("Negru");
fond.addItem("Verde");
fond.addItem("Albastru");
fond.addItem("Alb");
fond.select(0);
IL itemListener = new IL();
sel.addItemListener(itemListener);
fond.addItemListener(itemListener);
lista.addItemListener(itemListener);
selPanel.add(label1);
selPanel.add(sel);
selPanel.add(label2);
selPanel.add(lista);
selPanel.add(label3);
selPanel.add(fond);
selPanel.setBackground(Color.LIGHT_GRAY);
canvas = new MyCanvas();
add("West",selPanel);
add("Center",canvas);
addWindowListener(new WA());
setSize(400,300);
setVisible(true);
class WA extends WindowAdapter{
public void windowClosing(WindowEvent e){
System.exit(0);
class IL implements ItemListener{
public void itemStateChanged(ItemEvent event){
canvas.repaint();
Color genCuloare(String culoare){
Color color;
if (culoare.equals("Negru")) color = Color.black;
else if (culoare.equals("Verde")) color = Color.green;
else if (culoare.equals("Albastru")) color = Color.blue;
else if (culoare.equals("Alb")) color = Color.white;
else color = Color.black;
return color;
class MyCanvas extends Canvas{
public void paint(Graphics g){
String culoare = sel.getSelectedItem();
Color color = genCuloare(culoare);
g.setColor(color);
color = genCuloare(fond.getSelectedItem());
setBackground(color);
Dimension dim = getSize();
int cx = dim.width/2;
int cy = dim.height/2;
String figura = lista.getSelectedItem();
if (figura.equals("Linie"))
g.drawLine(cx/2,cy/2,3*cx/2,3*cy/2);
else if (figura.equals("Dreptunghi"))
g.fillRect(cx/2,cy/2,cx,cy);
else if (figura.equals("Cerc"))
g.fillOval(cx/2,cy/2,cx,cy);
ML listener = new ML();
canvas.addMouseMotionListener(listener);
public class ML implements MouseMotionListener{
@Override
public void mouseDragged(MouseEvent arg0) {
// TODO Auto-generated method stub
@Override
public void mouseMoved(MouseEvent arg0) {
// TODO Auto-generated method stub
public static void main(String []args){
Desenare d = new Desenare("Desenare 2D");
Where exactly do i have to add the MouseMotionListener , i guess that i should add it to the canvas , and the inherited metod shoul be modified in order to use canvas.repaint() at the location where the draggin effect has ended, or if there is some other way when i press the mouse on the figure and start moving around to getX() and getY() and use the repaint method at those coordinates , wich is a drag and drop effect , i think that it would be MouseMoved , but i`m not sure, and also not sure how to use the Event Listener , where exactly ?
Thanks,
PaulWhen you post a code, use code tags for propere formatting. Click CODE icon on the taskbar for generating code tag pair you need.
In order to do dragging the figure on the canvas or panel, you should use advanced Java 2D APIs, including Shape and its descendants. Example shown below might help, but beware, this version does not remember previous drag result for a figure over multiple lista Choice selection. Previous drag result is reset for the next selection of the same figure.
If you want to prevent flickering on the screen while dragging, use javax.swing and its components. If you have to use AWT, draw the figure into an Image or BufferedImage of full panel size and call g2.drawImage() in the paint() method.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.event.*;
public class Desenare extends Frame{
private Panel selPanel;
private Choice sel;
private Choice fond;
private Choice lista;
private MyCanvas canvas;
Color fcolor, bcolor;
enum Fig{LINE, RECT, CIRCLE};
Fig fig;
int xL0, yL0, xL1, yL1;
int xR0, yR0, xR1, yR1;
int xC0, yC0, xC1, yC1;
int dxL, dyL, dxR, dyR, dxC, dyC;
Shape shape;
public Desenare(String titlu){
super(titlu);
selPanel = new Panel(new GridLayout(6,1));
fcolor = bcolor = Color.white;
dxL = dyL = dxR = dyR = dxC = dyC = 0;
Label label1 = new Label("Culoare");
sel = new Choice();
sel.addItem("Alb");
sel.addItem("Albastru");
sel.addItem("Verde");
sel.addItem("Negru");
sel.select(0);
Label label2 = new Label("Figura");
lista = new Choice();
lista.addItem("Dreptunghi");
lista.addItem("Linie");
lista.addItem("Cerc");
lista.select(0);
Label label3 = new Label("Culoare Fond");
fond = new Choice();
fond.addItem("Alb");
fond.addItem("Albastru");
fond.addItem("Verde");
fond.addItem("Negru");
fond.select(0);
IL itemListener = new IL();
sel.addItemListener(itemListener);
fond.addItemListener(itemListener);
lista.addItemListener(itemListener);
selPanel.add(label1);
selPanel.add(sel);
selPanel.add(label2);
selPanel.add(lista);
selPanel.add(label3);
selPanel.add(fond);
selPanel.setBackground(Color.LIGHT_GRAY);
canvas = new MyCanvas();
add(selPanel, BorderLayout.WEST);
add(canvas, BorderLayout.CENTER);
addWindowListener(new WA());
setSize(400, 300);
setVisible(true);
class WA extends WindowAdapter{
public void windowClosing(WindowEvent e){
System.exit(0);
class IL implements ItemListener{
public void itemStateChanged(ItemEvent event){
Object o = event.getSource();
if (o == sel){
String culoare = sel.getSelectedItem();
fcolor = genCuloare(culoare);
canvas.repaint();
else if (o == fond){
bcolor = genCuloare(fond.getSelectedItem());
canvas.setBackground(bcolor);
else if (o == lista){
String figura = lista.getSelectedItem();
if (figura.equals("Linie")){
fig = Fig.LINE;
else if (figura.equals("Dreptunghi")){
fig = Fig.RECT;
else if (figura.equals("Cerc")){
fig = Fig.CIRCLE;
shape = prepareShape(fig);
canvas.repaint();
Shape prepareShape(Fig fig){
Shape shape = null;
if (fig == Fig.LINE){
shape = new Line2D.Float(xL0, yL0, xL1, yL1);
else if (fig == Fig.RECT){
shape = new Rectangle2D.Float(xR0, yR0, xR1, yR1);
else if (fig == Fig.CIRCLE){
shape = new Ellipse2D.Float(xC0, yC0, xC1, yC1);
return shape;
Shape prepareShapeDrag(Fig fig){
Shape shape = null;
if (fig == Fig.LINE){
shape = new Line2D.Float(xL0 + dxL, yL0 + dyL, xL1 + dxL, yL1 + dyL);
else if (fig == Fig.RECT){
shape = new Rectangle2D.Float(xR0 + dxR, yR0 + dyR, xR1, yR1);
else if (fig == Fig.CIRCLE){
shape = new Ellipse2D.Float(xC0 + dxC, yC0 + dyC, xC1, yC1);
return shape;
Color genCuloare(String culoare){
Color color;
if (culoare.equals("Negru")){
color = Color.black;
else if (culoare.equals("Verde")){
color = Color.green;
else if (culoare.equals("Albastru")){
color = Color.blue;
else if (culoare.equals("Alb")){
color = Color.white;
else{
color = Color.black;
return color;
class MyCanvas extends Canvas{
public MyCanvas(){
setBackground(Color.white);
ML ml = new ML();
addMouseListener(ml);
addMouseMotionListener(ml);
public void paint(Graphics g){
Graphics2D g2 = (Graphics2D)g;
setCoords();
g2.setPaint(fcolor);
if (shape != null){
g2.draw(shape);
g2.fill(shape);
void setCoords(){
int w = getWidth();
int h = getHeight();
xL0 = w / 4;
yL0 = h / 4;
xL1 = xL0 * 3;
yL1 = yL0 * 3;
xC0 = xR0 = xL0;
yC0 = yR0 = yL0;
xC1 = xR1 = w / 2;
yC1 = yR1 = h / 2;
public class ML extends MouseInputAdapter{
Shape s = null;
Point p0 = null;
Point p1 = null;
@Override
public void mousePressed(MouseEvent e) {
double dist = 0.0;
p0 = p1 = e.getPoint();
if (shape instanceof Line2D){
dist = ((Line2D)shape).ptSegDist(p0);
if (dist < 2){
s = shape;
else{
s = null;
else{
if (shape.contains(p0)){
s = shape;
else{
s = null;
@Override
public void mouseDragged(MouseEvent e) {
int dx, dy;
if (s != null){
p0 = p1;
p1 = e.getPoint();
dx = p1.x - p0.x;
dy = p1.y - p0.y;
if (s instanceof Line2D){
dxL += dx;
dyL += dy;
else if (s instanceof Rectangle2D){
dxR += dx;
dyR += dy;
else if (s instanceof Ellipse2D){
dxC += dx;
dyC += dy;
shape = Desenare.this.prepareShapeDrag(fig);
canvas.repaint();
public static void main(String []args){
Desenare d = new Desenare("Desenare 2D with Dragging support");
} -
How do I copy music downloaded from Cd or Itunes to differnt folders? Have tried drag and drop
How do I copy music downloaded from Cd or Itunes to differnt folders? Have tried drag and drop
How to use your iPod to move your music to a new computer
-
90% of pictures disappeared after adding Maverick. My Time Machine folders were in the right order but mostly empty so useless for restore. Repair and rebuild attempts were not effective. Downloaded my Carbonite file which is now sitting on my desktop. Is there any way to use the restore command to rebuild my portfolio or do I have to drag & drop approx 20,000 pictures? Can album groupings and faces be retained?
Do you still have the original library that was present at the time you upgraded to Mavericks? If so apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy Holidays -
HT5085 can i see i history of apps that have been download and dates of when download
need 2 know how or f i can see a history f all my app download even when they been deleted and redownload ???
You can see your purchase history on your computer's iTunes. If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it which you can click on
Viewing purchase history : http://support.apple.com/kb/HT2727 -
Hi,
I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
I am almost lost to find the operating tools.
1. How can I copy files from hard drive to computer and vis-a-versa?
2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
3. No right click works on track pad?
4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
I will very much appreciate if you could email me the with the solution/answers please.
Regards,
Khagendra Limbu1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera. -
I have a handfull of songs in my library that are not showing up bold like the other songs. When I click the icon to download from the cloud nothing happens and they will not load onto my ipod. When I look for them in the purchased area they show up as purchased and downloaded.
Welcome to the Apple Community.
So far as I am aware, books haven't been available for 6 years, so I'm wondering if you mean audiobooks.
Audiobooks are not currently part of the content that can be re-downloaded. -
When I imported the photos, I thought I had it set to import them into folders but it didn't happen. I have one file of 10000+ photos in the same folder. I would likede to start over, remove what has been imported (not delete) and start over importing them into folder that I choose rather than all in one.
Okay - but after that..
I followed the instruction in the tutorial and did the following:
Click Import (Existing Files)
Select source - (pictures appear in grid)
include sub-folders if appropriate
Select “add”
File Handling - Changed build preview to standard
Apply During Import - Nothing added
Add keywords - Added keywords
Import (Tutorial says to click “Import” but import is greyed out and not available)
What am I missing? The destination information does not appear. I tried selecting that before I clicked "Import" but that didn't help.. -
Pls Help! Drag and Drop problem, identical symbols acting differently - same code! WHY?
In the attached file, I have a series of symbols that have a drag and drop command to change colour at different sections of a bullseye, and that are also text editable (html).
However, some of the symbols get stuck and will not be moved after moving once or at all, and some get stuck once their text has been edited.
I have poured over the code and it appears to be the same for each symbol - can anyone explain as to why this is happening?
I also cannot now edit the text properly on the ipad (it is really fiddly to change between different symbols to edit their text -- is there maybe a better way to do this? A button to change between symbols to then edit their text, can you help with this too?)
THANK YOU SO MUCH!!!
File here:
https://www.dropbox.com/s/g71gnfichjgyehn/NEW%20RISK%20RADAR.zipHi, I think I undertsand what you mean now, so the code is as below, btu I am not sure what a handler is? but some of my risks still get stuck once the text has been changed on them:
// Use for loop for attr
// deleted yepnope since you load with scropt loading
// added pos for each symbol so we can replace them there.
document.ontouchmove = function(e) {
e.preventDefault();
var risk = ;
var Pos = [
{'x':-9,'y':806},
{'x':27,'y':854},
{'x':72,'y':894},
{'x':71,'y':934},
{'x':231,'y':811},
{'x':231,'y':853},
{'x':231,'y':894},
{'x':231,'y':934},
{'x':388,'y':811},
{'x':388,'y':852},
{'x':388,'y':893},
{'x':388,'y':934},
{'x':543,'y':811},
{'x':543,'y':853},
{'x':543,'y':893},
{'x':543,'y':934}
var myText = ;
for (i=0;i<risk.length;i++){
sym.getSymbol(risk[i]).$(risk[i]).attr("contenteditable",true);
sym.$('Quadrant_text').attr("contenteditable",true);
sym.$('Quadrant1_text').attr("contenteditable",true);
sym.$('Quadrant2_text').attr("contenteditable",true);
sym.$('Quadrant3_text').attr("contenteditable",true);
// apply the draggable JQuery UI plugin to the MyDraggableSymbol symbol on your stage
sym.$('Risk1').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk1").stop("Initial");
sym.setVariable("symName","Risk1");
//adding for risk3_orange similarly add for other symbols
sym.$('Risk1').draggable();
sym.getSymbol('Risk1').$("Risk1").bind('click tap',function(ev) {
sym.$('Risk1').draggable('disable');
}).unbind('dblclick tap',function(ev) {
sym.$('Risk1').draggable('enable');
sym.$('Risk2').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk2").stop("Initial");
sym.setVariable("symName","Risk2");
//adding for Risk2 similarly add for other symbols
sym.$('Risk2').draggable();
sym.getSymbol('Risk2').$("Risk2").bind('click tap',function(ev) {
sym.$('Risk2').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk2').draggable('enable');
sym.$('Risk3').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk3").stop("Initial");
sym.setVariable("symName","Risk3");
//adding for Risk3 similarly add for other symbols
sym.$('Risk3').draggable();
sym.getSymbol('Risk3').$("Risk3").bind('click tap',function(ev) {
sym.$('Risk3').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk3').draggable('enable');
sym.$('Risk4').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk4").stop("Initial");
sym.setVariable("symName","Risk4");
//adding for Risk4 similarly add for other symbols
sym.$('Risk4').draggable();
sym.getSymbol('Risk4').$("Risk4").bind('click tap',function(ev) {
sym.$('Risk4').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk4').draggable('enable');
sym.$('Risk5').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk5").stop("Initial");
sym.setVariable("symName","Risk5");
//adding for Risk5 similarly add for other symbols
sym.$('Risk5').draggable();
sym.getSymbol('Risk5').$("Risk5").bind('click tap',function(ev) {
sym.$('Risk5').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk5').draggable('enable');
sym.$('Risk6').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk6").stop("Initial");
sym.setVariable("symName","Risk6");
//adding for Risk6 similarly add for other symbols
sym.$('Risk6').draggable();
sym.getSymbol('Risk6').$("Risk6").bind('click tap',function(ev) {
sym.$('Risk6').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk6').draggable('enable');
sym.$('Risk7').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk7").stop("Initial");
sym.setVariable("symName","Risk7");
//adding for Risk7 similarly add for other symbols
sym.$('Risk7').draggable();
sym.getSymbol('Risk7').$("Risk7").bind('click tap',function(ev) {
sym.$('Risk7').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk7').draggable('enable');
sym.$('Risk8').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk8").stop("Initial");
sym.setVariable("symName","Risk8");
//adding for Risk8 similarly add for other symbols
sym.$('Risk8').draggable();
sym.getSymbol('Risk8').$("Risk8").bind('click tap',function(ev) {
sym.$('Risk8').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk8').draggable('enable');
sym.$('Risk9').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk9").stop("Initial");
sym.setVariable("symName","Risk9");
//adding for Risk9 similarly add for other symbols
sym.$('Risk9').draggable();
sym.getSymbol('Risk9').$("Risk9").bind('click tap',function(ev) {
sym.$('Risk9').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk9').draggable('enable');
sym.$('Risk10').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk10").stop("Initial");
sym.setVariable("symName","Risk10");
//adding for Risk10 similarly add for other symbols
sym.$('Risk10').draggable();
sym.getSymbol('Risk10').$("Risk10").bind('click tap',function(ev) {
sym.$('Risk10').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk10').draggable('enable');
sym.$('Risk11').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk11").stop("Initial");
sym.setVariable("symName","Risk11");
//adding for Risk11 similarly add for other symbols
sym.$('Risk11').draggable();
sym.getSymbol('Risk11').$("Risk11").bind('click tap',function(ev) {
sym.$('Risk11').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk11').draggable('enable');
sym.$('Risk12').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk12").stop("Initial");
sym.setVariable("symName","Risk12");
//adding for Risk12 similarly add for other symbols
sym.$('Risk12').draggable();
sym.getSymbol('Risk12').$("Risk12").bind('click tap',function(ev) {
sym.$('Risk12').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk12').draggable('enable');
sym.$('Risk13').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk13").stop("Initial");
sym.setVariable("symName","Risk13");
//adding for Risk13 similarly add for other symbols
sym.$('Risk13').draggable();
sym.getSymbol('Risk13').$("Risk13").bind('click tap',function(ev) {
sym.$('Risk13').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk13').draggable('enable');
sym.$('Risk14').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk14").stop("Initial");
sym.setVariable("symName","Risk14");
//adding for Risk14 similarly add for other symbols
sym.$('Risk14').draggable();
sym.getSymbol('Risk14').$("Risk14").bind('click tap',function(ev) {
sym.$('Risk14').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk14').draggable('enable');
sym.$('Risk15').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk15").stop("Initial");
sym.setVariable("symName","Risk15");
//adding for Risk15 similarly add for other symbols
sym.$('Risk15').draggable();
sym.getSymbol('Risk15').$("Risk15").bind('click tap',function(ev) {
sym.$('Risk15').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk15').draggable('enable');
sym.$('Risk16').draggable(,
drag: function(e,ui)
sym.getSymbol("Risk16").stop("Initial");
sym.setVariable("symName","Risk16");
//adding for Risk16 similarly add for other symbols
sym.$('Risk16').draggable();
sym.getSymbol('Risk16').$("Risk16").bind('click tap',function(ev) {
sym.$('Risk16').draggable('disable');
}).bind('dblclick tap',function(ev) {
sym.$('Risk16').draggable('enable');
sym.getSymbol("Drop").$('Outer').droppable(
sym.getSymbol("Drop").$('Middle').droppable(
sym.getSymbol("Drop").$('Target').droppable(
sym.$('resetBtn').click(function(){
sym.$('Quadrant_text').html('Quadrant');
sym.$('Quadrant1_text').html('Quadrant');
sym.$('Quadrant2_text').html('Quadrant');
sym.$('Quadrant3_text').html('Quadrant');
for (i=0;i<risk.length;i++){
sym.$(risk[i]).css({"left":Pos[i].x,"top":Pos[i].y,"position":"absolute"})
sym.getSymbol(risk[i]).stop(0);
sym.getSymbol(risk[i]).$(risk[i]).html("Challenge");
But is still doesn't work,
Subject: Re: Pls Help! Drag and Drop problem, identical symbols acting differently - same code! WHY?
Maybe you are looking for
-
Nothing more to add
-
How can I change a column name in table (JDeveloper 10.1.3.3)?
I'd like to change a table column name, for example instead of "FirstName" I'd like "Name". Here is the preview: http://img208.imagevenue.com/img.php?image=86575_firstname_122_578lo.JPG Thank You in advance!
-
Multiple Insertion with substitution Variable
Hi, I want to insert multiple values with single substitution variable in single column. I mean my query is as under. Add a column to infobb02 called 'Wife' and populate it with first names. If there is no wife, enter null. Write a PL/SQL loop to gat
-
Acrobat dc installed without my permission
I implicitly installed a version of Acrobat XI 30 day demo on my machine for testing and evaluation. Now this Adobe Acrobat DC appears in my CC menu. I never installed this, as I want to buy the standalone version. Also there is no uninstall, only up
-
Touchscreen calibration issues on palm tx after hard reset
my palm tx touchscreen stopped working.so i did hard reset and deletted all data.now when it reboots, i see the screen with the bullseye target and stylus.i am unable to calibrate the screen with stylus.if i keep touching the screen with my finger,th