Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.  What to

Hej!
Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.
What to do?
/yoel

Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
After setting up the setting up the system.
I ensured the following : (although begrudingly) so I could do a system restore if needed.
-I disabled Anitvirus & Firewall
-enabled Volume Shadow Copy Service
I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
i also downloaded and installed the 32 bit versions of :
C++2008 redistributable (32 bit)
C++2008 SP1 redistributable (32 bit)
I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
I installed Photoshop Elements (32 bit)
I started both apps and updated them to 12.1.
Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

Similar Messages

  • Photoshop Elements does not start under Windows Vista

    The Twain-Module of my Canon CanoScan FS4000US Filmscanner works only under Windows Vista (no newer OS!). Fortunately I own an older Notebook with Vista as OS, so I have PSE Version 5.0.2 installed and use it to import my old color negatives via the twain module. Fine! It even works with 42 bit. But suddenly, PSE refuses to start and freezes at the window loading the libraries. At this stage it can only be stopped with the help of the task manager. A little search in the internet informs me that I am not the only user with that specific problem. Any help from Adobe?

    After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.

  • Photoshop elements 6 not starting up after install. Any ideas whats wrong?

    I Have just installed Photoshop 6 on my new computer, Windows Vista home basic with service pack 1  32-bit os. It installs fine. However, when I click on the icon to start it up nothing happens. Can anyone help me.

    Try installing the license-service update:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice

  • Adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I cou

    adobe starter edition has photo numbers by the picture such as DSCO0283.JPG , where can I find that number on the pictures in PHOTOSHOP ELEMENTS 12--reason being that photoshop elements will not convert my catalog to version 12. If i had that number I could manually rebuild my collections into the photoshop elements 12, but all that i see in photoshop elements is dates and i have multiple pictures from the same dates. HELP! I

    finally getting back to this project---adobe starter edition 3.2 is on a windows XP computer
    ADOBE PHOTOSHOP ELEMENTS 12 is on our Windows 8.1 computer.
    error messages--- had to give up trying to convert---I copied all our pictures to our windows 7 laptop and I installed adobe photoshop elements 12 (my bought program)
    I wanted to try to convert there first. also I copied our catalog to this computer also. Everything was working fine I could see the collections just as they where on the XP computer.
    then I tried to convert on the laptop. I believe the error said something about corrupt file, so I gave up that day. Next day I tried to open ADOBE STARTER EDITION 3.2  and it wanted an unlock code, no such code exists. and my copy of Elements 12 turned into a trial version which has expired. So I am a little hesitant to try to convert on the XP  computer and mess up the existing catalog,
    unless there is a fool proof way. I have tried manually making collections/ albums on Windows 8.1 and PHOTOSHOP ELEMENTS 12  and coping pictures into the new albums. sloooow!!
    I probably have about 4500 pictures and 150 collections/ albums to go. So any suggestions would be appreciated.

  • Photoshop CS4 will not Start

    Hi, i'm usually quite responsible when it comes to making sure my system can coap with what i am asking of it, but i've ran into a problem that my computer just can't seem to get around, and means that photoshop cs4 will not start up.
    I've been making .PAT files from a few pattern sourcebooks i've recently brought. The first two went fine, but a japanese sourcebook contained 250 reasonably hi-res pattern images which i put through an automated action which set them all as patterns for me for the Pattern Overlay option in beldning options. When i did this i noticed my computer started to slow down near the end of the process, so i saved out the .PAT file from them, and quit photoshop to free up over 2.10GB worth of data. I have 4GB on a 32bit XP, but only 2 and a half-ish is seen by windows due to the hardware installed aswell. Of course i plan to chnage this to 64bit soon, but anyway, when photoshop now is told to start up, it reads everything normally, then gets to "Reading Preferences", and crashes with an error report, which watching my task manager, i belive to be linked to memory shortage from having to load the patterns up.
    I reset my preferences to see if it would set them all back to default and not read the added pattern files, but that made no difference. Any ideas?
    Thanks in advance!!

    I'd look into doing a couple of tests:
    1.) Move those PAT files elsewhere
    2.) Eliminate all programs and Processes, that are unnecessary. Task Manager>Processes will give you a list of all that load, and you can probably stop half of them with no ill effects. I'd use MSCONFIG, so you can go back and easily activate them later.
    3.) Reboot and see what happens.
    Note: John's suggestion on the Presets folder might address #1, but I'd also physically Move them. It sounds like you're running totally out of resources to run PS, so Textures, and such, might be an issue too.
    A question: how are your Scratch Disks setup and please tell us about your I/O sub-system, i.e. the internal HDD's, their size, free space, speed, controller type and how these internal HDD's are allocated. Especially tell us if you have any physical HDD's partitioned.
    Good luck,
    Hunt

  • My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

    My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

    Did you download the Basic/Free version?
    I also thought the Trial period was as long as you needed!?
    What is your Warranty and Return Policy?
    You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
    All sales are final and there are no refunds.
    Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
    http://www.hamrick.com/sup.html#q

  • Photoshop CS5 will not open raw files from Nikon D810. What do I need?

    Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch?  Is there something I can do? 

    YAY!!! Success. Thanks Jim.  I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather   I'm such a noob, I hadn't even set up the correct date on the camera.
    ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
    View on open.abc.net.au
    Preview by Yahoo
          From: JimHess <[email protected]>
    To: Fran McFadzen <[email protected]>
    Sent: Monday, 26 January 2015, 10:20
    Subject:  Photoshop CS5 will not open raw files from Nikon D810. What do I need?
    Photoshop CS5 will not open raw files from Nikon D810. What do I need?
    created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Photoshop elements 11 not installing in windows 7 x32

    photoshop elements 11 not installing in windows 7 x32
    downloads ok then on install it gets to almost the end and a message appears can not continue and it uninstalls itself.

    Hello, thank you for your prompt reply. I have downloaded  v12 of Photoshop Elements and installed to my Win 7 x64 machine and its working like a charm. Perhaps v11 did not like the spec of my x32 machine.
    Thank you again from a satisfied customer.
    Regards William.
    Date: Sun, 9 Mar 2014 09:58:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: photoshop elements 11 not installing in windows 7 x32
        Re: photoshop elements 11 not installing in windows 7 x32
        created by Bill Hunt in Photoshop Elements - View the full discussion
    Can you list your computer hardware specs.? Special attention needs to be paid to the I/O (Input & Output), or the HDD's (Hard Disk Drives), their size, speed, amount of free-space, etc.Are you attempting to do the installation to the default location, or to a custom location? Good luck, and let us know a bit more please.
    Hunt
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6193137#6193137
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6193137#6193137
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6193137#6193137. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My computer says that this version of photoshop elements is not compatible with windows 7

    my computer says that this version of photoshop elements is not compatible with windows 7. What do I do?

    Care to give us some details of exactly what it is that you're trying to do?  Telling us the version of PSE would also help.
    Ken

  • I just "upgraded"????? to Lightroom CC, now it will not start on Windows 7.  can someone help me?

    I had Lightroom 5 and the creative cloud photographer bundle.  upgraded (some joke) to Lightroom CC and no lightroom will not start on Windows 7.  just dead in the water. any help?

    The fix was to completely remove all Apple Software following guides in previous posts.
    Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
    This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

  • Lightroom 4 will not intall on windows XP!!!    What is going on?  CS6 is compatible with XP!!!

    Lightroom 4 will not intall on windows XP!!!
    What is going on?  CS6 is compatible with XP!!!

    Tom Hogarty seems to think it might be somewhat code-related, John.
    Developing and testing across Operating System versions and platforms to ensure that we’re achieving this goal is a significant effort that takes time and resources.  XP is substantially different from Windows Vista and Windows 7, and requires a independent testing matrix, which increases the complexity of our development efforts.
    Adobe's Brett N had this to say on the same subject (with my emphasis):
    Vista made many very drastic changes away from Windows XP (although Windows Vista and Windows 7 are very similar).
    So, your computer (the physical hardware) being able to run Windows Vista is not the same thing as your OS (Windows XP) being able to run Lightroom 4.  It is simply too old and lacks much of the programming to run LR4.

  • Photoshop Elements does not start for the second time

    Hello,
    our customer has problem with PS Elements 12. He can start it for the first time and everything works fine. But when he closes the program and tries to start it again, it will not start. It doesnt even say anything. No error mesages or anything. He tried to instal a trial version of PS E 13 and it does the same thing.
    He's running Win 7 SP1 64 bit
    Any sugestions? Thank you.

    Hi,
    It has been known that the Welcome screen sometimes fails to close properly and prevents a second load.
    Most people have overcome the problem by creating a shortcut direct to the two main applications.
    Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
    Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    Brian

  • Photoshop Elements 12 not starting

    I recently bought a copy of Photoshop Elements 12, but it just won't start. Sometimes the splaschreen is loaded, but the editor won't launch.
    I'm running Windows 7.
    Can you please advise?

    Hi Brian,
    Thank you for the advice, I will keep that in mind.
    If I succeed, I will let you know.
    I am living in The Netherlands.
    Ineke
    Verstuurd vanaf mijn iPad
    Op 25 jun. 2014 om 19:29 heeft "Little_Pale_Face" <[email protected]> het volgende geschreven:
    I just bought Photoshop elements 12, installation was no problem, starting organizer is no problem, but editor will not start up. What do I do wrong ?
    created by Little_Pale_Face in Photoshop Elements - View the full discussion
    Hi,
    I meant create a new user account on your laptop. There are some settings that are stored on a per user basis so creating a new user may clear a setting.
    However, that may not help in your case - I have been trying to help someone else and got your two problems mixed up.
    The only reason that I had the editor fail before was resolved by running the disk cleanup and check tools.
    As you have returned the product, you could try installing the trial version. If you get it to work, then you may be able to buy a boxed version from Amazon or similar. I'm not sure where you are but the boxed version can often be on special offer from the big stores at a cheaper price.
    Brian
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6496317#6496317
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Photoshop CS5 will not start after Outlook

    If I start Outlook (Office 2007) as the first application after loading OS (Win 7 Ult, 64 bit), Photoshop CS5 will not open (message: "needs to close down). I then have to log off and in again and start Photoshop before Outlook to get it to work. I seem to remember having this kind of problem some years ago - but do not remember whats caused this problem. Is there anybody out there having the same kind of trouble? Or even better - the solution?

    Hmm... I have CS5 Master Collection, and MS Office 2007, and I have never had any problems opening ANY program, in ANY order
    My hardware and OS is linked here... http://forums.adobe.com/thread/652694?tstart=0 - you might want to post details in case someone is able to spot a problem based on more information

  • Photoshop CC will not start

    I recently added a dual monitor setup and now photoshop CC will not open. Here is my event log error
    Log Name:      Application
    Source:        Application Error
    Date:          4/30/2014 10:30:48 AM
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      SDA4034845.asurite.ad.asu.edu
    Description:
    Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a1d7
    Faulting module name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a1d7
    Exception code: 0xc0000005
    Fault offset: 0x00124f80
    Faulting process id: 0x2c4
    Faulting application start time: 0x01cf6499ebddd40f
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Photoshop.exe
    Faulting module path: C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Photoshop.exe
    Report Id: 2a6cbe1a-d08d-11e3-baf6-d067e502481e
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-04-30T17:30:48.000000000Z" />
        <EventRecordID>21147</EventRecordID>
        <Channel>Application</Channel>
        <Computer>SDA4034845.asurite.ad.asu.edu</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Photoshop.exe</Data>
        <Data>14.2.1.570</Data>
        <Data>52f4a1d7</Data>
        <Data>Photoshop.exe</Data>
        <Data>14.2.1.570</Data>
        <Data>52f4a1d7</Data>
        <Data>c0000005</Data>
        <Data>00124f80</Data>
        <Data>2c4</Data>
        <Data>01cf6499ebddd40f</Data>
        <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Photoshop.exe</Data>
        <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Photoshop.exe</Data>
        <Data>2a6cbe1a-d08d-11e3-baf6-d067e502481e</Data>
      </EventData>
    </Event>

    You could try renaming or deleting the Adobe Photoshop CC Settings preferences folder.
    This page describes where to find that folder...
    Preference filenames and locations in Photoshop CC
    -Noel

Maybe you are looking for

  • Create a single tall image from a multi-page pdf file

    I would like to take a multi-pake pdf file, and have all of the pages "appended" from top to bottom edge to create a single tall image. I am a teacher, and I currently do this by hand, I am then able to annotate the entire page and croll down an enti

  • Can't launch Acrobat 9 - HELP!

    Can anyone help: I have just installed a legal, purchased copy of Acrobat 9 Standard, but after I accept the user agreement, the program shuts down... no error messages or anything. Here is my history: I initially downloaded the trial version of Acro

  • Exporting Frame content to Word?

    Hi, I am working on manuals that have been done in both Frame 7.2 and Word 2003 and am hoping to migrate to a newer version of Frame some day. Right now I'm trying to update a few Word-based manuals with some content from Frame docs but it's slow and

  • NW2004s Sneak Preview Java install never starts up

    I've installed NW2004s Sneak Preview Java on Windows XP Media Centre Edition with 2Gb RAM and 8Gb swapfile but the server never finished starting up properly. I've tried with JSDK 1.4.2_09, _11, _12 and with the recommended Sun JDK parameters but alw

  • Creating Simple transformation for an XML data having deep structure

    Hi I have the following XML structure.. <REQUESTS>   <REQUESTNAME>REQ123</REQUESTNAME>   <REQUESTID>1234</REQUESTID>   <CITY>NEWYORK</CITY>   <ZIPCODE>123456</ZIPCODE> <COMPETENCIES>    <LANGUAGES>      <COMPETENCY>         <SKILL>SAP</SKILL>