Orgmodel more than one email adress per orgunit

Hi experts,
is it possible to add more than one e-mail adress to an orgunit? My customer wants to enable users that are only in one orgunit to have more than one email adress to sent mails from. In the orgmodel (ppoma_crm -> select orgunit -> GoTo / Detail object / Enhanced object description) I only can add one email adress in the infotype email adress per orgunit.
[Screenshot|http://imageshack.us/photo/my-images/27/infotypeemailadress.jpg/]
Adding a second email adress to the bp changes nothing. The current workaroung is adding a user to a second orgunit with another email adress, but this is not very efficient.
The used CRM system is 5.0.
If you need more information, do not hesitate to ask. I am thankful for every hint or suggestion!

Could use aliases in iCloud mail, but you won't be able to set up various inboxes for them and you cannot set up email addresse of other providers or personal domains.

Similar Messages

  • How do I select more than one email address on a Contacts card. I did it before but trouble with Yosemite

    Cannot select more than one email address at a time from Contacts. Before I upgraded to Yosemite, I could view all mail addresses in "All Contacts" and select multiple or single email addresses by "command and tap" for mail. Now I have to open each card and select one address at a time. I don't want to create groups just want to select the addresses I need at the time.

    i dont pay for hosting at all.. i just pay every two years to keep my domain name and with that i get free email forwarding and web forwarding... so i can create email addresses but need to forward them to somewhere else...
    i forward them to one of the POP3 email addresses i was given by my ISP...
    in entourage i set up two email accounts on the one identity so i can send email from the ISPs email or from my domain name email... now if someone sends me an email to my domain name email i get it twice... it only does this on my new mac though, it didnt do it on my old one...
    if i stop forwarding my emails then where will they go? i dont think ill get them, will i?
    very confused!
    Message was edited by: wob

  • HT4207 how do i delete more than one email in ios7

    How can I delete more than one email at the same time in ios7?

    Select Edit at the top in the left hand pane, tick the small circle against each email you wish to delete,  select trash at the bottom of the left hand pane.

  • HT204053 can I use more than one email address on icloud (using iphone and mac)?

    I have an email account which seems to be using icloud, and I want to add another email account so that I can access it via icloud.  Is it possible to have more than one email address on icloud?  I have an iphone 5 and a macbook.

    You can only have one email account for each iCloud account.  You can create up to three alias addresses, but these will still receive email in the current account inbox.  This explains how to create an alias if you want to do this: http://support.apple.com/kb/PH2622.
    You can create a second ("secondary") iCloud account on your device by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud and entering a different iCloud ID.  This will give you second iCloud email account but it will only be fetch email (not push).  Also, you can only create a maximum of three iCloud accounts on each device so this would use one of your allotted accounts.

  • TS3899 How do I delete more than one email at a time from my i phone 5C

    How do I delete more than one email at a time from my i phone 5C

    With your Mail app open and the listing of the messages, tap Edit at the top right.  Then check each circle on the left side of the messages to delete.  When you have checked those to delete, tap Trash at the lower right.
    Next tap Mailboxes upper left, under accounts select the account, then for the account tap Trash.  Select Edit upper right, and at the bottom, Delete All, and confirm Delete All and all will be removed at one time.

  • How to send more than one email while creating Order

    Hi,
    after upgrade from 4.5 to 4.7 we have following problem. In 4.5 in XK03 t-code we could enter for our vendors more than one email address (divided by ";" sign). In 4.7 it is impossible. When we create Purchase Order, the output of the created document is email (our own defined Z*) and we would like that this document prinout should be sent to more than one vendor's email addresses.
    And in our R/3 4.7 we cannot input in XK03 more than one email address because program SAPFM06P, which prints Purchase Orders, runs function module SX_INTERNET_ADDRESS_TO_NORMAL, which checks if there are ";" in the address and if yes - it causes error.
    How to make vendor data so that the email is sent to more than one email address?
    any help would be appreciated.

    Hi Dorota,
    I think there is no such option to disable in SPRO as far i am aware of.
    May be you might want to use a distribution list instead of an email? Or try to misuse any unused field( you can enable many other fields from SPRO which are really not used generally).
    Cheers
    VJ
    Btw if you wish to explore here is the path in SPRO
    Fiancial Accounting --> Accounts Receviable and Accounts payable --> Vendor Accounts --> Master Data --> Prepareations for creating vendor master data --> Define account groups with screen layout.
    Select the account group for your vendor and from the next screen double click on General data section and then again double click on communication section.
    Cheers
    VJ
    Message was edited by: Vijayendra  Rao

  • Is it possible to have more than one Tax code per line item in Billing docu

    Is it possible to have more than one Tax code per line item in Billing document ?

    Hi,
    I have a different perspective there.
    If an item is applicable for two different taxes which are represented by two different tax condition types and these tax conditions are configured in the tax procedure, FTXP and so on....then these two condition records can have two different tax codes.
    We actually have this scenario in EU now, where EU talks about service tax in 2010 apart from the normal VAT. So now we have MWST and ZWST(Say)
    Now there are some materials which come with a service associated with it. So a service charge is also levied when the material is sold. So the material price will become applicable for VAT and the service charge becomes applicable for service tax. In this case, the tax classification of the customer will have two entries in sales orders updated in the fields VBAK-TAXK1 and VBAK-TAXK2 based on the sequence number of these condition types.
    Now based on different tax classification of the customer, we have 2 different tax codes representing different %of tax.
    Hope it helps

  • Cant use more than one authorization group per report with SBO CR Basic

    Cant use more than one authorization group per report with SBO CR Basic.
    I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
    i have defined two users, manager and supervisor.
    I have defined two groups, M and S.
    Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
    i enter to one report, disable the public option to enable group authorization, and then check M group.
    Manager can see the report, but Supervisor is not allowed. So far good.
    Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
    But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
    It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
    So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

    Cant use more than one authorization group per report with SBO CR Basic.
    I have installed on SAP Business One SBO 2007 SP00 PL49 the Crystal Reports Basic 2.0.0.7.
    i have defined two users, manager and supervisor.
    I have defined two groups, M and S.
    Manager belongs in managers (M), and supervisor is assigned to the supervisors (S).
    i enter to one report, disable the public option to enable group authorization, and then check M group.
    Manager can see the report, but Supervisor is not allowed. So far good.
    Then i uncheck M, then check S in the report properties, and Manager cant get in, supervisor opens the report, So far good.
    But when we check both Groups or more, only the M group authorization appears to work, and S group users cant acess, even the report is allowed for that group, also happens with all the groups appart the first (2nd, 3rd, 4th, etc.).
    It seems that a report can manage a single group, but i have to be shure to tell this to the customer.
    So far we have included all Manager users to the S group in order that only S group is used and authorized users can use, but this is duplicating user participation in groups, and it would be much easier to check the desired groups for a single report.

  • Can you use more than one email address on one account as to enable two or three devices to use imsg????

    Can you use more than one email address on one account as to enable two or three devices to use imsg as when i add new email address's in settings it just says veriyfying and nothing happens????

    If I read your question right, yes.
    My pad has two e mail addresses, and my phone has a phone number as well as a e mail address.  For each device you can add additional 'receive at' addresses in settings.
    Note, when you add a new address, apple will send an e mail to that new address that you need to respond to, to show that it is a valid address.  So look in the inbox of that e mail account for the verification e mail.  Note further, some spam filters think that the verification e mail might be spam, so if it does not show up in your in box, look in any spam file you might have.
    in my case, the verification e mail came within a few minutes of declaring the new address.
    The multiple address are useful if you have more than one device under your apple id, and want to be able to send stuff to that particular device.

  • I use Exchange to sync my iphone4S with Outlook.  On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

    i use Exchange to sync my iphone4S with Outlook.  On my iphone, my contacts are split into multiple records if they have more than one email address - how can I consolidate them on the iphone

    I have loaded my Firefox bookmarks into Internet Explorer Favorited. I also uninstalled Safari.
    I go to iTunes on my phone and see no wat to connect my iPhone to my laptop. I see Music, Shows, etc., the kind of stuff I would expect, but no clue as to how to proceed.
    Would you please be so kind to fill me in on how to "That syncing is done via iTunes. Connect the device to iTunes, select it, then go to the Summary page and select to sync bookmarks."?
    I am not sure what you mean by "Summary Page"
    Thank you

  • Permit more than one document type per series

    Hi folks,
    Please let me know what is the precise use of :
    "permit more than one document type per series"
    Cheers...
    Jitu

    Hi
    Certain country regulations permit document numbering series that contain more than one document type.
    All of these documents are part of the same numbering series.
    Select this option if these regulations are relevant for the company.
    This setting determines the settings that are displayed in certain Document Numbering windows,
    and cannot be changed after it has been selected.

  • Can I run more than one Node Manager per machine?

    Hia,
    We have a situation in our project where we need to run different domains on a Solaris machine in different java modes.
    Say Domain1 should be running in 32bit version of java where as Domain2 should be running in 64bit mode due to the nature of testing currently going on in different domains.
    We could successfully get the two domains running in different java modes in parallel by modifying the start scripts to decide which Sud data model to start the servers based on certain parms. However, the pain here is with the Node Manager.
    My understanding is that there should be one Node Manager running per machine for all the domains running on that machine. So when ever I have to run a domain in a java mode different to that of what Node Manager is running on, I had to kill the node manager and start it in the same version that I want to start the other servers in since Node Manager uses its starting parms internally to start the Managed Servers (Note: there is no issue in running the Admin Server regardless of the node manager mode as expected).
    Can somebody advise me if there is any way to get around this hassle?
    I want to know if we can run more than one node manager per machine.
    Below are the details of my env.
    Weblogic Server 10.3
    Solaris 10 SPARC 64 bit (SunOS 5.10 Generic_142900-14 sun4v sparc)
    java version "1.6.0_20"
    Hope all this makes sense...
    Cheers,
    Satish.
    Edited by: apsnaidu on Mar 15, 2013 3:29 PM

    You can run as many node manager as you want in a particular machine.
    At the time of starting the node manager you need to pass hostname & Port.
    This will start the nodemanager on different ports of a machine.
    sh startNodeManager.sh <hostname> <port>
    eg:- sh startNodeManager.sh dev_machine_01 5556
    sh startNodeManager.sh dev_machine_01 5557
    sh startNodeManager.sh dev_machine_01 5558
    After starting your node manager in different ports you need to change machine details from admin console.

  • TS3276 As an email is being send the mail activity indicator is showing that more than one email is being send....what is going on here? Thanks

    Question: As I send an email, the mail activity indicator is showing that more than one email is being sent! Last time it was 5 even though I was only sending one and there were no other emails in the out box! What's going on here I ponder?

    Several time in the past, similar question was asked in the forum, for example check the link and reference OSS notes mentioned in it. You can also search the forum, if you need further info on this topic.
    http://scn.sap.com/thread/3230103
    Regards,

  • Is there a way to delete more than one email at a time on my iPad?

    Is there a way to delete more than one email at a time on my iPad?

    At the same instant?  No.
    Can you select five or six emails within about 5 seconds?  Yes - one at a time.

  • How do I log into more than one email account and view at the same time?

    In the past, I could log in to hotmail.com and open and view more than one email account in firefox. I must have closed something, so now I can't do that?
    HELP???

    Hi Shasanka,
    ofcourse it's possible to control more than one instrument at a time.
    You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
    So I suggest to read the manual and to look at the examples that come with LabView!
    And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

Maybe you are looking for