OrgUnit and card MC no merchant ID could be determined

Hello Experts,
I have maintained all the required configuration settings in IMG for merchant ID but still not able to see the merchant ID getting determined in the sales order.
How else can i get merchant ID determined automatically in the transaction?
Thanks in advance,
Jeevan

Hi,
It could be possible that you have missed the configuration for a clearing agent.
This is a standard rule that needs to be changed, where you need to assign an Organization Unit as the clearing agent to your Credit Card transaction.
http://help.sap.com/saphelp_crm50/helpdata/en/c6/0c48cc92d511d396cf00a0c9306667/frameset.htm
Let me know if it helps.
Thanks & Regards,
Nelson

Similar Messages

Payment Card Merchant ID could not be determined

In the CRM WebGUI, when I go to an In-House Repair --> payment method --> new and I enter in my credit card data I get the error "For OrgUnit and card VISA, no merchant ID could be determined." The details of this error show the following:
System Response
Without a merchant ID, the authorization module cannot be determined. Therefore, authorization for this card cannot be carried out.
Procedure
Check the relevant Customizing entries regarding organization unit and card data.
In SPRO under Assign Merchant ID (for Payment Cards) I've tried entering all sorts of OrgObjects with Card Type VISA and a valid Merchant ID the OrgObjects I've entered include all the data in the WebGUI Organizational Data and all the data from Tcode OOOT. None of these have fixed this error.
Does anyone know how to fix this error or what OrgObject to use?

Hi Loknath,
First check PPM exist or not by tcode : /SAPAPO/SCC03 - Master Data -> Production Process Model -> Production Process Model
If PPM exist than make sure it is in active status.
You can see it by status ,Status should be Active.(double click on planXX on left panel).
Or if didn't resolve the probelm go to SLG1 log and see further details of error like material and SAP suggested corrective action.
Hope it will help you .
Manish

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

I Have a iPhone 4s and I keep getting this error "Could not activate cellular data network" I have sprint and to use any internet om my iphone i have to connect to wifi. What do i do to fix my celluar connection. I took my sim card and put it back in.

I Have a iPhone 4s and I keep getting this error "Could not activate cellular data network" I have sprint and to use any internet om my iphone i have to connect to wifi. What do i do to fix my celluar connection. I took my sim card and put it back in and it still didnt work.

Davidb24 wrote:
Ok but im not the one who pays tge sprint bill
Apparently, no one pays it... That's why they shut off your service.

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?

If I put my 7300 in slot4 at 8x, and a 8800GT at slot1, 16x, could I boot 10.4.11 on my mac pro 1,1 if I unplug the monitor from the 8800GT?
I have different os's installed on my different hard drives. I'm using 10.6.8 now, but I go back to 10.5.8 and 10.4.11 on accasion. Can I run 10.4.11 with the 7300 in the 8x lane? As long as I unplug the 8800GT but leave it installed in the 16x slot1? And attach a monitor to the 7300?
What about using the 7300 to run extra monitors or a monitor while running 10.5.8 and 10.6.8? Is that a problem? I have 10GB Ram and the 1,1 original machine.

I know the 8800 requires 10.5.2, but if it is installed (at 16x) but no monitor is connected, will it allow the 7300 to control one or two monitors in 10.4.11? When the 7300 is in the 8x lane? And will it boot?
I lost part of your train of thought. Are you telling me to get just an ATI 5770 to continue using this machine into the future?
I thought the original mac pro 1,1 needed cards of the same manufacturer. If I use the 5770, that eliminates the ability to boot 10.4.11, correct?
What if I keep the 7300 handy in a box and put it in when I have to use 10.4.11? ( select the start up disc, shut down, change the card, restart) Does the 5770 require a power cable to another board that I might damage with repeated changes?

HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

What SDK for board and card games dev?

Hi,
I'm creating board and card games as a hobby. I used Windows
GDI in the past, but my experience is that my creativity is limited
by the difficulty in manipulating sprites, transparency and
scalable graphics. I don't care about 3D. I do care about
synchronization between audio and video events. I'm currently using
MS Visual Studio 6. Games available on shockwave.com surely use
some sort of SDK to help carry these tasks, but I don't know if
they all use the same or there are many flavors available. In
extra, I like the fact you can easily develop online versions and
play online with others. Can it support Mac? I can't spend a lot of
money and time on new development tools, but maybe there is an
Adobe product that would allow me to do exactly what I have in
mind. Can someone tell me which product would best suit my need and
what should be my expectations.
Thanks,
- JP

I tried to look for clovertown processors, and they are still around 250 each plus there are different models....could you give some models of processors that will work for sure on my 1st gen mac?
Regarding the video card:
I tried to use the diamond 1Gb, and on the 8X slot it works basically at half the speed of the x1900 (3dmark 06 gave me 4200 for the x1900 and 2250 for the 4650); so the gain is close to 0
Under macOs does not work at all; and when i tried to swap the 2 cards to boot the pc and use the 16x rail on the 4650, basically Vista decided to not recognize either card, leaving me with 1 monitor off and one on, without being able to recognize the video card.
I wonder why the PCI utility on mac does not allow to set which slot will get the 16X....the only place where the x1900 fits is slot 4, so even if the card would work fine , i would have to swap cards and connectors everytime that i wanna play in bootcamp, and this is not the best choice
Last attempt: tried with a 4870 and looks like the flashing does not always work (read trough 26 pages of a post on another site); so since i don't want to pay 350 for the apple version, i've got a 3rd party 3870 for less than 200 dollars (shame that the 4870 for pc cost the same price), that form the links that you guys gave me, seems the best choice for pro apps and games, compared to the 8800 (and the plus that under bootcamp i can get a second card and use crossfire is a huge plus, especially when the price of this card will go further down!).
Thanks everyone for giving your suggestions, and hope that this post will help other people that, like me, were trying to update their machine to a better video card

HT204053 i put the visa of my friend and they say me: YOU PURCHASE COULD NOT BE COMPLETED ..

i put the visa of my friend and they say me: YOU PURCHASE COULD NOT BE COMPLETED ..i try to buy gems for the clash of clans

A credit card has to be in the name of the user owning the apple itunes account.
You: Jim,
Him: Tom,
No go if credit card is in Tom's name.

Receipt and card were in stolen wallet.. Unable to return defective item in-store??

I purchased a pair of bluetooth headphones from a local bestbuy (In-store). They turned out to be defective and static-y and I need to return them. The catch is between the time of purchase (about a week ago), my wallet was stolen, which contained both the debit card that was used in the purchase and the receipt for the item. I took the item back into the original store, and after some discussion they said they could not accept a return because I did not have the original card used in the transaction. I did have a replacement card already, which is linked to the same account, but the 16-digit number obviously is different than it was.
Getting my wallet stolen was not my fault, and I think it would be ridiculous to be stuck with headphones that were sold defective to me. What can I do or say to get best-buy to accept my return?? I would even accept store credit at this point. I have been attempting to locate the numbers from the old card as they said they could look up the purchase history with that information, but I am not having much luck there.
Also, how can they not have a record of my purchase under my name, phone number, or scan of the barcode on the item? What did they take that information for if they arent using it for transaction records???
Solved!
Go to Solution.

Hello there cliMAKtic-
I don’t know a guy that doesn’t live in total fear of having their wallet stolen and having to go through all the hassles when it happens. After all, besides fashion, why else would there be chain wallets?
All kidding aside, I can only imagine how much of a pain it must have been to have your wallet stolen and not being able to return your headphones because you no longer had the receipt certainly didn’t help. That being said, Best Buy does require a receipt be present for all return and exchanges per our Return/Exchange Promise found here. However, we generally should be able to help you locate your purchase depending on what information you can provide us. Debit card purchases usually can be found, so I’m surprised the associate you spoke with at the store wasn’t able to locate it.
In the end, it sounds like the advice that autotech and RealGeorge gave you helped out and you were able to get your product returned. I’m glad to hear that everything worked out.
Thanks for connecting with us!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Java Card Coding Examples and Cards

Could some of you more experienced with Java Card programming send me an example of a Java Card code?
This stuff is pretty confusing.
Also, is their a website that has definitive prices for a sample of Java Cards, card coders, and card readers?
Thanks,
Mao

Hello,
You can search for vendors and products. G&D, Aconite, Collis and many ohers.
See this, It has also a code snippet:
http://members.tripod.com/tanmaykm/work/articles/smartcard.html
after reading that, see this for a code:
http://www.javaworld.com/javaworld/jw-11-1999/javadev/CorporateCard.html
You need a loader or simulator to test your applets. And also JDK... Download JDK from SUN for free, compile your code and load it on the card... I found also good examples here:
http://www.cs.ru.nl/~martijno/ooti/smartcards.html

APEX SSO and Load balancing: Could not determine workspace for application

We had a single HTTP Server serving APEX in a 10.2.0.2 database configured with SSO to be used by the developers. APEX has been registered as a partner application and the login url has been CA Siteminder protected so that the SM_USER details are forwarded in the header for the application to use for authorization. Everything is fine so far.
Now we have added a HTTP Server on another host and have it all set up for APEX and its pointing to the same database. APEX_ADMIN access works as normal, but applications previously using SSO now get the following error after entering the URL.
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7620 Could not determine workspace for application ().
Using HTTP Watch I find that the application is not even trying to redirect to the login page.
What is wrong here?

APEX has been registered as a partner application as described in
http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html
In the meantime I found metalink document 368746.1 which describes the cause of this problem. Please read carefully what I wrote, it all works when the the new APEX web server is turned off in the server farm on the load balancer and directed through the original web server. When running regapp.sql the hostname in the listener token was using the virtual hostname. This works fine if the request comes from the original APEX server which proofs that there is nothing wrong with the installation and set up of SSO. When directing the request to the new APEX web server the APEX_ADMIN page still works only existing work spaces using SSO don't seems to work anymore resulting in a error as described in the subject.
As for metalink document 368746.1 naming the causes of this error:
- there are no duplicate entries in WWSEC_ENABLER_CONFIG_INFO$
-LISTENER_TOKEN clearly works for requests coming from the first web server
-theoretically the web server listener port could be changed from 7777, but port 80 needs to be maintained here as production is mimiced as far down as possible.
Is there some cache table which can be cleared? How is it that the flows schema (apex engine) can not find the work space when the request comes from a new web server which can however access the APEX_ADMIN pages.
anyone?

My iPhone 5s does not send texts and calls fail, anyone know what could be wrong?

The iPhone 5s is about 140 days old, I called apple yesterday before I knew about this problem and send a diagnostic test to which they said was all good, they said the phone ismy blocked in anyway and that I got a great buy And it's second hand but in Christine condition with around 200 days left of warrenty.
can anyone help or tell my why this would be happening?
its not in airplane mode.
it does not have "do not disturb settings on.
its locked on EE and has a T-Mobile SIM installed and is showing signal bars.
what could possibly be the problem?

*the phone is not blocked in anyway

I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.

TS1398 my problem is my iphone 4s is connected to the internet(wi-fi) with full signal strength but freezes when browsing and says "Cannot Open Page, Safari could not open page because the server stopped responding".

my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.

Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network

I make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

i make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
To unhide your purchases
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button.

OrgUnit and card MC no merchant ID could be determined

Similar Messages

Maybe you are looking for