Orientation wrong and printing error
A couple days ago suddenly when I want to print something the default is landscape in the visual of the document Im wanting to print but it show Im in portrait mode. Then when I print I get an error. Anyone have a clue. I tried removing preferences but same thing. Im using the latest OSX and it doesnt seem to matter which application Im in. Thanks
When print in Mail, look in the printer dialogue box. Every printer's dialogue box is different, almost certainly the answer is in there, you just may have to look for it.
Similar Messages
-
Not Enough Memory or Something Wrong with Printer error
My Epson 820 printer works fine and I can print a nozzel check pattern from the printer utility software. However, I can't print from any of my software. I keep getting the error "Something Wrong with Printer" or from some software I get "Not Enough Memory".
I'm not having any other problems and can do complex graphics in Photoshop without any memory issues. I've checked my printer setup and it clearly sees my printer. My Epson 820 also shows up in the Printing Options dialog box.
Any suggestions?Thanks for these suggestions. I believe it's my computer. I've started having additional problems. I opened a .pdf in Acrobat Reader and tried to print. After that I couldn't shut down my computer. Alarmed, I connected my firewire backup disk and backed up my hard drive. Then when I tried to eject the external drive, it didn't allow me to disconnect. It reappeared with the disk icon and a second folder labeled as the external drive but showing the drive was empty. I shut down and rebooted; all my files are in tact on the external drive but there's definitely a computer issue here.
Any suggestions how I should proceed? -
Crystal Report Preview and Print error
Hi,
I am trying my first Crystal report in SAP; I have created one report using OITE table and run it in Crystal Designer without any problem; Then I added it to SAP / Manager Crystal Report / New Report, but I get the following error message when I click the Preview and Print button every time;
The file does exist and the location is setup correctly; I dont understand why SAP can not find the file; Any comments?
SAP Crystal AddOn
Could not load file or assembly 'CrystalDecisions.Windows.Forms, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
OKHi,
When you google on "[Could not load file or assembly CrystalDecisions|http://www.google.com/search?q=CouldnotloadfileorassemblyCrystalDecisions]" you will find quite some hits.
One that might be important for you could be http://social.msdn.microsoft.com/Forums/en-US/vscrystalreports/thread/b0fc930f-5fc8-4475-bfe7-ad56616e838d/
That is depending on how the report is made.
Another option might be
http://www.velocityreviews.com/forums/t382557-could-not-load-file-or-assembly-crystaldecisionsweb.html
Best regards,
Peter -
Export PDF creates 0kb file and Print Error.
By "Print Error", I mean a simple pop-up window with the pages logo and the sentence "Print. Error while printing" even though I haven't asked for anything to be printed. The resulting pdf file is zero k in size and useless.
I had this problem in iW '06 and thought that '08 might fix it. No dice though.
Deleating prefs did not fix the issue. ['06 or '08]
Anyone? Thanks.
CSK
Burbank, CAI suspect that you've turned off a couple fonts with Font Book (or perhaps removed them from the Fonts folder). Pages expects certain fonts to exist - even if we don't use them or even want them.
-
Yosemite and Printer error 79.00FE
Just upgraded to Yosemite and now I can't print on my Hewlett Packard Laserjet 8150n.
All I can get is "Printer Error 79.00FE" or "Printer Error 79.01FE".
Any ideas?
--BillGood question, John. Thanks.
Printer works fine (like always) printing Excel page, Microsoft Word page, this page from Firefox, QuarkXpress page.
I only got the error when trying to print the page of an email from Apple about a product at the Store. Other email prints fine.
Isn't that just bizarre?
I printed the page as a PDF, and when I tried to print that, got the 79.00FE error again.
So the only thing it doesn't want to print is the email from Apple. But when I take a screen shot of the email, I can print that (but not a PDF).
Whew! I thought bad things had happened. (I remember the release of System 7 back in the old days, a six-month nightmare.) -
OS X 10.8.5 and printer errors
I have OS X 10.8.5 with a Dell 2150cn Printer, but receive the error message "Printer does not support IPP/2.0. trying IPP/1.1" when attempting to print a document. What do I need to do to make the connection work?
Had same problem.
Possibly the easiest way is to get the printer to use a different protocol. I have HP CP4025DN.
The solution for Windows works for Mountain Lion for me - all depends on whether the printer permits selectable protocol.
See
http://support.apple.com/kb/ts2236
Printer web page permits a choice of prioroty for Bonjour protocol. Choosing something other than IPP and then adding new Bonjour printer should fix it. -
Then documents library box comes up showing file name *.xps. Help!
You have selected your default printer as the Microsoft XPS Document Writer. To solve this, go to Devices and Printers, right-click your printer of choice, and select 'Set as default printer'.
-
ORA-00001: unique constraint: How to discard the insert and print error
Hi: I have a table with a constraint on a single field. The application that is inserting into this table is a multithreaded application. Sometimes two inserts could come with the same value for this field. Is it possible in oracle to configure it to ignore the request which causes this error instead of throwing this error back to the application?
Thanks
RaviWhat type of application are you developing in which it's ok for you to ignore a users request?
As a user i'd be a little upset if i submitted a request, and the proper response was suppressed, i go along about my day assuming the application did what i told it to do....never knowing that it just decided to ignore what i'd asked it to do. -
I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now. -
My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?
I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
com.oxsemi.driver.OxsemiDeviceType00 Version: 1.28.7
com.rogueamoeba.InstantOn Version: 6.0.2
com.rogueamoeba.InstantOnCore Version: 6.0.2
com.Cycling74.driver.Soundflower Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.bombich.ccc.plist
[not loaded] com.dymo.pnpd.plist
[not loaded] com.intego.BackupManagerPro.daemon.plist
[not loaded] com.micromat.TechToolProDaemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.orbicule.witnessd.plist
[not loaded] com.sierrawireless.SwitchTool.plist
[not loaded] com.stclairsoft.AppTamerAgent.plist
[not loaded] org.macosforge.xquartz.privileged_startx.plist
[not loaded] pcloudd.plist
Launch Agents:
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.lacie.raidmonitor.daemon.plist
[loaded] com.lacie.safemanager.daemon.plist
[loaded] com.micromat.TechToolProAgent.plist
[loaded] com.orbicule.WitnessUserAgent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[not loaded] .DS_Store
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
[loaded] com.divx.agent.postinstall.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.propaganda.dejavu.dvmonitor.plist
[loaded] com.valvesoftware.steamclean.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
Synergy
TomTomHOMERunner
Dropbox
3rd Party Preference Panes:
Déjà Vu
Flash Player
Flip4Mac WMV
GR-55
Paragon NTFS for Mac ® OS X
Perian
Printopia
TechTool Protection
Witness -
I am getting a "printing error" message on my Pixma M432 and a lightening icon at the right
I am getting a "printing error" message on my Pixma M432 and the lightening shaped icon in the triangle beneath the stop button is flashing. My documents won't print and are backed up onscreen on my computer. I have turned it off and on. What is wrong?
solution?
-
Printer error ICC message what is wrong?
Printer error ICC comes up when I try to print. What is wrong?
I am having trouble printing the scrapbook pages that I have created. There is an error message that pops up saying that I need to install a printer before I can print! I have a printer installed! I went to Help, it suggested that I uninstall the printer, which I did twice! And I also, insalled the Photoshop onto another laptop, which also gives me a similar message!
Seems like a glitch or something! Any help you could give me will be most appreciated! -
Bonjour printing error in console.log and cups error_log
Hi everyone,
I have a client who has been successfully printing to an HP LaserJet 4000 over his home LAN for some time now. However, this evening he was no longer able to print, with the print queue stopping immediately when he would try.
iMac (Intel) Core Duo, Mac OS X 10.4.8, connected through a D-Link DI-524 wired/wireless router. There is a D-Link DP300U print server connected to one of the LAN ports on the router, to facilitate printing to a printer that has not been connected to the LAN recently.
After using Printer Setup Utility to reset everything, repair permissions, etc., the system still would not print. No updates have been installed since the last week of January 2007, and printing has been fine since then.
The only clue I was originally able to come across was found in console.log:
~ ~ ~ ~ ~
No log handling enabled - turning on stderr logging
snmpInk: Unknown host (SMB-Maui\0321.local.)
~ ~ ~ ~ ~
Then, I looked under /var/log, under the cups disclosure triangle, at error_log:
E [14/Feb/2007:20:50:44 -0800] [Job 2] Unable to locate printer 'SMB-Maui\0321.local.' - Unknown host
E [14/Feb/2007:20:50:44 -0800] PID 282 stopped with status 1!
~ ~ ~ ~ ~
There is only the one Mac on the LAN, which is not named "SMB-Maui"-anything. I was able to get printing to function via AppleTalk once it was enabled, but the client has been printing successfully via Bonjour for some time and so there seemed no reason why this should simply "happen". No new software has been installed, as he's really quite good about leaving the system alone to do its thing.
Disk Utility repaired multiple print-related permissions errors before I began using Printer Setup Repair.
I'm looking for troubleshooting steps to take beyond this point. While the client is satisfied that he can now print via AppleTalk, I am not and would very much like to resolve the lower-level problem. Please advise?
Thanks much for your time,
MBJHi Phil,
Thanks much! I think you might be on the right track, as I got some unexpected results from Bonjour Browser.
First of all, there's no Internet Printing Protocol (IPP) entry at all—in fact, several others I have present on my own, local system are not to be found on the remote iMac. What the iMac does show is the following:
local - 3
Apple Remote Desktop (net-assistant.udp.) - 1
iMac
(IP address):3283
[(IPv6 MAC address)]:3283
Remote Frame Buffer (rfb.tcp.) - 1
iMac
(IP address):5900
[(IPv6 MAC address)]:5900
Workgroup Manager (workstation.tcp.) - 1
iMac [MAC address]
[(IPv6 MAC address)]:9
(IP address):9
I have reapplied the 10.4.8 Combo Update, with no effect to the problem itself, nor to what is showing in Bonjour Browser.
One other possible clue: A visitor on the home LAN did attempt to print from Virtual PC 7 on a portable they had brought with them. They were unable to do so from Windows XP, but could print properly from Mac OS X. There is no known, causal relation to the problem at hand here - I mention it to be thorough, no more or less.
I'll standby for your further thoughts!
Thanks much for the assist,
MBJ
Hi Mike,
Bonjour is a service discovery system. It doesn't
print. For
that you use ipp or lpr, etc. The reason why
Appletalk works
is that it has its own discovery system. It's older
and
apparently more reliable. Bonjour uses muticast ip
but
unless muticast requests are forwarded can't get
outside
a local subnet.
Once on your net was a machine - probably a samba
server -
named "maul". Must have been, it's in a mib
somewhere. Oh
wait - maybe it's cached in the dlink from its old
days on
the dark side!
Judging from the direction of the slash it was a
Windows
machine (I don't think that's an octal 321). CUPS
thinks
that's where the printer is. Normally cups discovers
the
printers via bonjour, and bonjour must be coming
back
with the wrong info!
But bonjour isn't that smart, something must be
tricking it.
There's a wonderful free utility called "Bonjour
Browser"
which will show you which services are being
announced.
Give it a try:
http://www.versiontracker.com/dyn/moreinfo/macosx/2162
2
Let me know what it shows under ipp.
-Phil
Powerbook G4, iMac
(Intel), and tons of hardware sitting in the closet
Mac OS X (10.4.8)
Power Mac G4 (QuickSilver 2002), 20" Cinema Display (ADC) Mac OS X (10.4.8) Dual 1.0 GHz G4/1.5 GB RAM/2x160 GB HD/SuperDrive/GeForce4 Ti/PCI USB 2.0&FW400 -
Error in Preview and Print in Crystal Report Viewer 2.0.0.7 in Workstation
Hi Guys,
I am encountering a problem when clicking preview and print in Crystal Report Viewer 2.0.0.7. It returns an error
Unhandled exception has occurred in your application. If you click Continue the application will ignore and attempt to continue. If you click quit, the application will close immediately. Load report failed.
I already install the runtime crruntime_120_mlb, . net framework 3.5 sp1 and the add-on itself. The viewer is working properly in SAP Server. My version of SAP is SBO 2007 A SP00 PL10.
Regards,
Michaelhere's the detailed error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text
CrystalDecisions.Shared.CrystalReportsException Load report failed. --- System.Runtime.InteropServices.COMException (0x80004005) The device is not ready.
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_Database()
at SAP_CR.MyForms.frmReportViewer.ConfigureCrystalReports()
at SAP_CR.MyForms.frmReportViewer.frmReportViewer_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies
mscorlib
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3620 (GDR.050727-3600)
CodeBase fileCWINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll
SAP_CR
Assembly Version 2.0.0.7
Win32 Version 2.0.0.7
CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRSAP_CR.exe
Interop.SAPbouiCOM
Assembly Version 8.0.0.0
Win32 Version 8.0.0.0
CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRInterop.SAPbouiCOM.DLL
System.Windows.Forms
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Windows.Forms2.0.0.0__b77a5c561934e089System.Windows.Forms.dll
System
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3614 (GDR.050727-3600)
CodeBase fileCWINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll
System.Drawing
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll
CustomMarshalers
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase fileCWINDOWSassemblyGAC_32CustomMarshalers2.0.0.0__b03f5f7f11d50a3aCustomMarshalers.dll
Interop.CR_Crypto
Assembly Version 6.0.0.0
Win32 Version 6.0.0.0
CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRInterop.CR_Crypto.DLL
System.Data
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase fileCWINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll
System.Configuration
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll
System.Xml
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3082 (QFE.050727-3000)
CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll
System.Transactions
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase fileCWINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll
System.EnterpriseServices
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase fileCWINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll
CrystalDecisions.Windows.Forms
Assembly Version 12.0.2000.0
Win32 Version 12.0.2000.840
CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.Windows.Forms12.0.2000.0__692fbea5521e1304CrystalDecisions.Windows.Forms.dll
CrystalDecisions.Shared
Assembly Version 12.0.2000.0
Win32 Version 12.0.2000.840
CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.Shared12.0.2000.0__692fbea5521e1304CrystalDecisions.Shared.dll
CrystalDecisions.ReportSource
Assembly Version 12.0.2000.0
Win32 Version 12.0.2000.840
CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.ReportSource12.0.2000.0__692fbea5521e1304CrystalDecisions.ReportSource.dll
CrystalDecisions.CrystalReports.Engine
Assembly Version 12.0.2000.0
Win32 Version 12.0.2000.840
CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.CrystalReports.Engine12.0.2000.0__692fbea5521e1304CrystalDecisions.CrystalReports.Engine.dll
System.Web
Assembly Version 2.0.0.0
Win32 Version 2.0.50727.3618 (GDR.050727-3600)
CodeBase fileCWINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll
CrystalDecisions.ReportAppServer.CommLayer
Assembly Version 12.0.1100.0
Win32 Version 12.0.1100.840
CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.CommLayer12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.CommLayer.dll
CrystalDecisions.ReportAppServer.ClientDoc
Assembly Version 12.0.1100.0
Win32 Version 12.0.1100.840
CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.ClientDoc12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.ClientDoc.dll
CrystalDecisions.ReportAppServer.DataSetConversion
Assembly Version 12.0.2000.0
Win32 Version 12.0.2000.840
CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.ReportAppServer.DataSetConversion12.0.2000.0__692fbea5521e1304CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.DataDefModel
Assembly Version 12.0.1100.0
Win32 Version 12.0.1100.840
CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.DataDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.Controllers
Assembly Version 12.0.1100.0
Win32 Version 12.0.1100.840
CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.Controllers12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.CubeDefModel
Assembly Version 12.0.1100.0
Win32 Version 12.0.1100.840
CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.CubeDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
Assembly Version 12.0.1100.0
Win32 Version 12.0.1100.840
CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.ReportDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.ReportDefModel.dll
BusinessObjects.Licensing.KeycodeDecoder
Assembly Version 12.0.1100.0
Win32 Version 12.0.0.840
CodeBase fileCWINDOWSassemblyGACBusinessObjects.Licensing.KeycodeDecoder12.0.1100.0__692fbea5521e1304BusinessObjects.Licensing.KeycodeDecoder.dll
JIT Debugging
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example
configuration
system.windows.forms jitDebugging=true
configuration
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box. -
I have a simple label document in Pages which I print to my label printer. The label is 1.49 x 3.47 inches and needs to print in Landscape, and it needs to print to my Dymo label printer. How do I set up the Page Setup or Print Setup so it defaults to this document size, orientation, and printer, every time, without me having to manually enter those settings every time?
Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.
Maybe you are looking for
-
Indesign Bug with Auto-Size and fitting in Anchored frames
Hi, Steps to reproduce: 1. Create a text frame with 2 Anchored text frames with the same width. 2. Make the anchored frames Auto-Size --> Vertical only 3. insert text to the first frame, when type enter to the next line the frame become higher but th
-
Disabled combo boxes don't display properly after loading a movie.
Hi, I have a main movie that contains some combo boxes. Some of them may be disabled. By pressing a button I load another movie using loadMovie. The loaded movie also contains combo boxes. When the button is pressed, the clip that shows the combo box
-
Syncing Palm Photo conduit with Treo 650
After much troubleshooting I have finally, successfully synced my Treo but only after I disable the Photo conduit. If I try to sync with it on everything syncs fine until I get to Media and then iSync crashes. I get a window asking me if I want to se
-
Okay, so I have had problems with my hard-drive in recent months so I backed up my videos I bought from the Music Store and I copied them (which actually erased them from my CD, so it was more like it 'Cut' them) back to iTunes when I had it up and r
-
P.R NOT RELEASE.
Dear Sir, A user had previously rerl a p.r worth 15 lakh , now a second line item is added of Rs 8750, but now this p.r is not release , in ME 54N the user clicks on change / disp icon then a msg comes --this p.r can not be