ORIGINAL and AP set..

hello...what the different between with ap set..
****Moderator Note****
Edited Email address.
Message Edited by linwood on 30-Apr-2008 11:15 AM

AP sets are grey imports and therefore are not covered by the manufacturers warranty. However, there is a huge saving in purchase cost.

Similar Messages

I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup

I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup in itunes or on my computer

Did you fail to import them to your computer before restoring?
Not good.
They are likely gone.
You can try restoring from backup.

VeI have edit set in iphoto to use in photoshop. When i save in photoshop the photo returns as the original and not the edited rsion.

I have edit set in iphoto to use in photoshop element 9.
When i save the edited photo in photoshop it returns to iphoto as the original and not the edited version.

Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu.
OT

I am trying to "personalize my cs2 software online download with the serial number from my original boxed cd set and it didn't work. I tried using the download serial number and that doesn't work either. Need help!

I am trying to "personalize" my cs2 software online download with the serial number from my original boxed cd set and it didn't work. I tried using the download serial number and that doesn't work either. Need help!

I understand that you have also used the download link & serial number from Adobe - CS2 Downloads, if still the CS2 is not working, then please refer to the system requirement for e.g System requirements | Photoshop
The issue can be that the present operating system might not be compatible with the CS2.
Regards
Rajshree

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

Iphoto and pse elements 9 events original and modified

Hi I am new to iphoto and adobe elements 9 so please accept my apologises if this is answered eleswhere.
I have set up iphoto with the library to store my photos and set up in prefs. to use elements as editior. I can click on edit when on a photo in either events or photos and edit with elements then save and the photo is sent back to iphoto. All this is ok. When I view my photos in either photo or event i see two photos the original and the edited one. I have follwed the path of each photo back the photo on the left for example can be revealed in finder as the original, the photo on the right can be revealed in finder as the orginal and the modified. Both orignals are revealed as the same photo so only in one place. Can I get events to only show the modified photo not both oginal and modified. The only way I can see is to hide the original. I have followed carefully all the editing instructions in the discussions and i believe to be doing this correct. As soon as I click on edit I see a duplicate photo apear then elements opens and I do my editing and then save (not save as) and the photo goes back to iphoto as modified image. To sum up I have only one original and one modified stored in iphoto but both are in events when viewing events.
Thanks for any help given.

Suggest that you delete preferences:
Preference settings control how Photoshop Elements displays images, cursors, and transparencies, saves files, uses plug‑ins and scratch disks, and so on. If the application exhibits unexpected behavior, the preferences file may be damaged. You can restore all preferences to their defaults.
Press and hold Alt+Control+Shift immediately after Photoshop Elements begins launching. Click Yes to delete the Adobe Photoshop Elements settings file.
A new preferences file is created the next time you start Photoshop Elements. For information on a specific preference option, search for the preference name in Help.

Bigger difference between original and corrected footage than in Fcp?

I have tried asking this on the color forum, but have been very unsuccessful, maybe someone here knows why?
Why is it that when Im color correcting In COLOR and enable and disable the grading I get a bigger difference between the original and corrected footage than when I send it back to final cut and compare the result of the cc with the original footage.
In Final cut sometimes it looks almost the same as the original but when Im in Color the difference is always bigger?
When I send it back to FCP its like I get 80 or 85% percent of what I had in color.
Any ideas???

Maybe if you had read what I wrote to you you would have noticed me saying that this happens independent of infrastructure. I tried several different set ups it happens in all of them
Im telling you its not the setup but here goes, the last one I worked on was a mac pro, inked through Fiber Jet SAN with 14TB of usable storage. fully integrated control surface giving DaVinci type ease of operation and control of multiple parameters simultaneously.
latest eCinema 23" LCD HD Reference Monitor.
Again i tried different configurations (Blackmagic, AJA,) and different monitors
Funny thing I have the same exact problem on my simple Macbook Pro.
I first thought set up, but it wasent
I tought it could be the codecs but it wasent. (or maybe it is the xd cam footage)
Now Im wondering if these two softwares manage color and the color space in a different way?

Upgrading to 3G - selling original and SIM card confusion

A few days ago, I upgraded my original iPhone to the 3G. I'd now like to sell the original.
If it matters, the 3G is a refurb from ATT - part of the process was to call ATT's automated service which simply transfered my existing number to the new phone. (I did not swap SIM cards). The old phone now shows "No Service".
When I set up the new phone in iTunes, I used the "New Phone" option and simply re-synced my information.
I've used the secure Erase function on the original and the phone shows the connect-to-computer symbol as when new.
Everything I've read has said to remove the SIM before selling. Given the info I've provided, is that really necessary. What is the risk, or more specifically, what information could still be stored on the SIM card?
-phil

The old SIM card can be tossed out. As it was written to, and then deactivated and can not be touched again with another account.
All the new buyer needs to do is obtain a new SIM card from at&t and they can assist with activation of the new buyers iPhone.
I hope this clears things up a bit

Maintain new inspection lot origin and assign inspection types

Hi,
I want to Maintain new inspection lot origin and assign inspection types .For Ex: 90, NoRange: 90 DCr :001 ,TL Type : S and Stat : 4 because i want to maintain TL Tpe S- reference operation set.
Please provide me the solution.
Regards,
Niyas.

Hi
As per SAP std You can not create a Inpsection lot origine but you can certainly create a Inspection type.
Just a suggesion..
Try Inspection lot origin: 89 (Misc) NoRange: 90 DCr :001 ,TL Type : S and Stat : 4
and create Inspection type 90 with varient 01/02 in inspection lot origine 01.
This will solve your purpose
Regards
Sujit

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

When I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

when I open a raw file (NEF Nikon 7100) and apply setting then click save, I get an error ( could not complete your request because of a program error ). Ideas?

Oh, dear.
If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

Can't see original and edited Pic in My Catalogue

I started using Photoshop Album Starter Edition yesterday. And I'm pretty sure that when I edited a picture, the catalog would insert the edited version right next to the original.
Now, I cannot see both the original and the edited version. I see in the catalogue only originals I have not edited and the edited versions of all the others.
In Windows Explorer it is clear that the original picture is there. Also, I can click on it and open with Starter Edition (Viewer), but that only lets me see a slide show version - no editing.
I've tried reconnecting and finding (using menus and buttons) and I get an error message that the file(s) is/are already in the catalogue.
The Show All option is on in the catalogue, BTW, and I have tried this on two different computers with separate downloads of APA SE (downloaded at separate times) with the same result
If I change the filename slightly - e.g. file001.jpg => file001a.jpg, then I can import the picture, but renaming all the files would be a burdensome process.
How can I view and edit both the original versions and the edited versions right next to each other?
Thanks!

Thanks for the prompt reply. I'm glad I wasn't going crazy, and there's a reason the originals weren't viewable. If I understand you correctly, the original can come back into view in PSA SE if I choose to "revert."
Question:
Does "Revert" mean that (1) the edited image disappears altogether - i.e., is deleted - or (2) the image doesn't show up in PSA SE's catalog any more, but still exists physically on the drive?
As to why I'm trying to fight PSA's help: Sometimes I just want to see the original and the edited versions to see if I really prefer the edited version better, or want to try different editing options. I know you can do this side by side in the "before & after," but the images there are not very large.
And I guess you're right about duplicating if I want to do different things with the same image, but that requires planning ahead, a trait which I ....
So, Question:
Is there some way to fight back and win, i.e., get the catalog to show both the originals and edits, other than individually renaming each original file and importing it again?
If not, then I'll have to look at the images side by side in windows explorer or do the duplicate option.
Thanks again!
- Ileana

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

Can you save your own theme and button set up so I can use the same format

Can you save your own theme and button set up, so I can use this same format for similar content. I want to keep the button content and the theme the same without having to create it everytime? I am trying to streamline the process for multiple dvd's with the same menu and buttons but different content. Does that make sense?

I am only new to this caper too, but I am pretty sure you can save a theme as a favourite by pressing the "save theme as favourite" button under file. If you have edited an existing theme but don't want to lose it, make sure you untick the replace existing button.

Jabber 9.2 and StartCallWithVideo set to false not taking

The StartCallWithVideo option doesn't seem to working in Jabber 9.2 (tried 9.2.0 and 9.2.2). Tried false and FALSE for value.
The jabber-config file downloads fine and has all the settings below on PC and the DockedWindow is not visible so the settings are working, but the calls start with video still and on the Jabber GUI under call section the start calls with video is selected.
When I make call to someone else it starts with video unless I manually set to not start calls with video.
Not finding any bugs on this.
Anyone seen this before or know how to get it working if it isn't a bug?
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Client>
</Client>
<Directory>
<DirectoryServerType>UDS</DirectoryServerType>
</Directory>
<Options>
<StartCallWithVideo>FALSE</StartCallWithVideo>
<Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
<DockedWindowVisible>FALSE</DockedWindowVisible>
</Options>
<Policies>
<Screen_Capture_Enabled>true</Screen_Capture_Enabled>
<File_Transfer_Enabled>true</File_Transfer_Enabled>
<Disallowed_File_Transfer_Types>.exe;.msi;.rar;.zip;.mp3</Disallowed_File_Transfer_Types>
<Video_Disabled>false</Video_Disabled>
</Policies>
</config>

Anyone have fix to this issue with IM&P 9.1.1, I have UC Service profile setup right and the setting set to false and my client is getting current XML file but still starts calls with video. I've tried both upper case and lower case for the false value. Other settings from my jabber-config file are working just fine.
FALSE
I've been thru the links above and documentation again but not seeing a option anywhere on CUCM UC profile pages or IM&P to disable this.

ORIGINAL and AP set..

Similar Messages

Maybe you are looking for