Original asset Field in Asset Master

Hi Viewers,
Field Original asset in origin Tab is available for some asset classes. Few is asset classess that field is not available.
Can any one tell me where to activate that field. I have checked in the screen layout of the asset master data. It is not available there.
Thanks
Aswin

Proceed as follows.
1. IMG --> Financial Accounting --> Asset Accounting --> Master Data --> Screen Layout
2. Click on Execute "Define Screen Layout For Asset Master Data
3. Double -Click on Create Screen Layout for Asset Master Data
4. Select the layout you to make original asset number available for
5. Double click on Logical Field Group
6. Select Origin
7. Double Click on Field Group Rules
8. Make 41 ( Asset Under Constr) as optional and then check off both Mn No. and Sbno.
9. Save.
The above solution should resolve your issue. Refer back for any further clarification.
Elias

Similar Messages

How to activate fields under origin tab in the asset master data

Hello Gururs,
While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
regds
Ramachandra

Hello Markus ,
Thanks for your reply. I checked through Group box info then system is showing the following message .
status - DISPLAY
Reason - Authorization for asset view used
In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
regds
ramachandra

Investment order field is missing in origin tab of asset master (AuC)

Dear Experts,
While creating an asset master (AuC), the Investment Order field is not shown for the input, in the Origin Tab. Whereas for Asset master for the other Asset classes are showing this field for the input.
Please advice how can I get this field in the asset master under AuC asset class.
Thanks in advance in anticipation.
An early reply is well appreciated and properly rewarded with points.
Regards
Preethi

Hi,
First check the asset Scr.layout rule for asset class by using path -
Spro>Financial Accounting>Asset Accounting>Organizational Structures>Asset Classes-->Define Asset Classes
Select your asset class and check - asset Scr.layout rule .
Then go to -
Spro>Financial Accounting>Asset Accounting>Master Data>Screen Layout-->Define Screen Layout for Asset Master Data
Click on - Define Screen Layout for Asset Master Data
Select your Screen layout which you got earlier. In Logical Field group select 'Inv. account assignment'. and double click on field group rule.Then make required changes in 'Investment Order' as required - Required, optional, display.
Then check asset master data in AS02.

WBS Field in Asset Master Record

Hi All,
Currently we are working in 4.6 C version.
The requirement of the client is they want the Field WBS to be populated in asset Master Record under the origin Tab or Time Dependent.
The standard functionality is available in ECC6
Could some body help us in knowing how to achieve this in 4.6c, do we the SAP standard Solution or do we need to go for some enhancements.
Regards,
Nitin

Hi
@ Satish - Seems you have copied the reply from one of my earlier posts which is related to a different issue
@ Nitin: Go to Screen layouts (IMG > AA > Master data > Screen layout)
Here, you need to allow WBS Element in your screen layout... Also, if you cant see WBS there, Allow to use WBS element in the IMG Step AA > Integration with GL > Define Additional account assignment objects...
I never worked on 4.6, but I guess WBS must be allowed for usage
br, Ajay M

Complete information of the field 'Original asset that was transferred'

Hi,
I need to find all the 'Original asset that was transferred' of the each fixed asset. This field is in the master data/ tab origin. The problem is that the system only saves the first one in the table anla, but I can have more than one.
Do you know in which table I can find this information?
Thanks,
Cecilia

Hi,
Thanks for te reply. I was readind the note and it refers to table ANLZ and ANLA. The field is ANLA-AIBN1, it is not saved in change documents becuase the asset master data is not changed after the first value. It is showed only the first value and I need to find all the values.
Thanks,
Cecilia

Enhancement in Asset Master - Origin Tab

Dear All,
There is a requirement to enhance the Asset Master. The details are given below:
Contact Period: From : To: required in Asset Masster>Origin Tab below the Manufacturer Field.
Is it possible?
Any fields or tabs are available to enter the Lease Assets?
Expecting valuable guidelines from the experts.
Thanks in Advane.
Regards,
GB

Hi,
May be in your case the field status might have changed for leasing tab.
SPOR->IMG->FA->AA->Master Data->Screen Layout->Define screen layout for asset master data->Define screen layout for asset master data.......
Here choose your each screen layout rule and choose logical field groups and choose LFG 5-Leasing and choose field grouyp rules.
There make field status as optional for all the fields and then check.
And go to AOLA and choose layout SAP and choose Tab page titles->7-Leasing->Postition of groups on the tab pages*
There leasing tab must have been given.
Please check
Thanks,
Srinu

Screen Layout Field in the Asset Master Record

What is the use of the screen in the asset master record, ANLA-FELEI?
We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
It seems the one defined within the asset class takes precedence.

HI
Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area. With this one can have different screen layouts per dep. area.
Hope i'm clear to you.
Thanks,
Vijay

Custom Field in Asset Master Data

Dear Experts,
I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
I'm using a new installed SAP GUI 7.3 .
The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
Thank you.

Hi Karim
You can go through the steps below to customize the field u2018Planned. retirement onu2019
1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
Alternatively
2, Use AO21 to customize the field as above.
Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
Hope itu2019s helpful
George

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

Best practice for "Quantity" field in Asset Master

Hi
I want to know what is the best practice for "Quantity field" in asset master. It should be made displayed only or required field in Asset Master creation.
Initially I made this field as required entry. So user entered 1 quantity. At the time of posting F-90, he again entered quantity. So my quantity in asset master got increased. Hence i decided to make that field display only in asset master creation.
Now i made that field as display only in asset master creation. At the time of posting F-90, that quantity field is not coming only. I check my field status group for posting key as well as GL account. Its optional field. Inspite of that user is able to make entry in F-90. Now quantity field is '0' only in asset master even though there is some value in asset.
Please help what is the best practice wrt quantity field. Should be open in asset master or it should be display only.

Hi:
SAP Standard does not recommend you to update quantity field in asset master data. Just leave the Qty Field Blank , just mention the Unit of Measure as EA. While you post acquisition through F-90 or MIGO this field will get updated in Asset master data automatically. Hope this will help you.
Regards

Addition of field in asset master record

Dear All:
              I want add a field IN HOUSE PRODUCTION in asset master data creation, Moreover i want to add a field of Iniatiator in Asset master data. Please guide where should i go in SPRO. Waiting for your reply.
Regards
              Atif

You can use for this the User Fields in the asset masterdata
Financial Accounting / Asset Accounting / Master Data / User Fields
    Define 4-Character Evaluation Groups
    Define 8-Character Evaluation Groups
    Change Key Words in the Evaluation Groups
    Develop Enhancement for User Fields in Asset Master Record

How to validate a field in Asset master?

Hi,
I have requirement like need to validate field ANLA-TYPBZ,
Data uniquely passing to this field, i need to check whether data already exist or not while creating asset master using AS01 transaction.
eg: suppose ANLA-TYPBZ = 12345' entry is there in the table, if i tried to post the data using AS01 as '12345', it should give error message.
Thanks.

hi,
Follow the below steps:
1. create a validation in GGB0 at node Assets - > Master Data
2. create a routine in program where these validations were written. It is a copy from RGGBR000
3. activate validation: append a record in transaction OACV
http://wiki.sdn.sap.com/wiki/display/ERPFI/Validations
Regards
Alok
Edited by: alpatr on Nov 21, 2011 8:12 AM

How to display field Functional Location Field in Asset Master Data

Dear Experts,
I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
Thank you
Best regards,
Frans

Dear Frans,
I am sorry this is not possible.
Note 140482:
The field was created as a precaution. However, it is not being used at
present and consequently is not supplied.
In particular, you cannot use the field as a criterion for a selection
in Asset Accounting reporting. This is still true even if this field has
been included in the selection view delivered for the dynamic selections
by modification.
regards Bernhard

Making Useful life field optional in Asset master creation(AS01)

Hi all,
I want to make 'Useful life' field in 'Depreciation area' tab as optional in AS01 (Asset master).
1. I made the screen layout changes using AO21 and made Useful life optional
2. I assigned the above screen layout in OAYZ
Despite doing this, during asset master creation, the field still shows as 'Required' and not as 'optional'.
Am I missing anything else? Kindly provide some pointers.
Thanks,
Sridevi

Hi Sridevi
Please check your depreciation key. If your depreciation is based on useful life, the key is required regardless the field status.
Thanks
Sanjeev

Scrap Percentage Field in Asset Master

Hii Experts,
scrap value in main asset and sub number different.
i want to have scrap value different between main asset and sub number
example
asset number 123-0 scrap value = 1
asset number 123-1 scrap value = 0
asset number 123-2 scrap value = 0
I want when i change the main asset i.e 123-0 with scrap value-1, it should update all the relavant sub numbers like 123-1 and so on..
is there any configuration to solve this problem. (now i have to manual change by as02)
Regards,
Abhay

Hi Abhay
In standard system, as soon as asset master is saved, then it's not possible to change sub-number's master data via changing main number mastre data because either main number and sub number are individual asset.
the possible way to realize your expectation is to use mass change combining a substitution of field 'scrap value' via T-cd:AR01.
Hope it's helpful.
Regards
George

Original asset Field in Asset Master

Similar Messages

Maybe you are looking for