Original ClockIn/Out entry alog with Corrections

Hi Team,
We are on ECC 6.0,EhP4 and EP7. we are using the report RPTCORAPP for mass approval of Clock In/Out corrections by Line manger through ESS.
I have a requirement where in the Manager wants to view the Original entry for Clock In/Out along with the errors while approving.
Request to pls suggest on this.
Thanks.

You cant show original clock in but you can add more columns in this report layout in backend try to add it
check the note 1455462
Edited by: Siddharth Rajora on May 16, 2011 5:35 PM

Similar Messages

Change of Video Frame One Sample Out of Sync with Correct Point on Timeline

Change of Video Frame One Sample Out of Sync with Correct Point on Timeline.
It has been found on the author's PC that, in Audition 3 in Multitrack View, a video file displayed in the video window will change its frame one sample later than it should do with respect to the correct point on the timeline. This has led to extra work having to be done by the author, as detailed later.
To demonstrate this issue:
Create a new multitrack session. Enable the Time and Video windows. Enable only 'Snap to Frames'.
Using an external program, render a two-frame video clip at 25fps. Let the first frame contain the letter 'A', and the second frame contain the letter 'B'. Making sure that the Display Time Format is set appropriately, in this case at 'SMPTE 25 fps (EBU)', lock this clip on the multitrack timeline, ensuring that the clip starts at time 00:00:00:00.
Create a mono audio clip of silence at 48kHz 32-bit that is two frames long. Lock it on an audio track, ensuring that the clip starts at time 00:00:00:00.
Place the cursor at time 00:00:00:01 and create a cue marker at this point by pressing F8.
Zoom into the timeline so that approximately twenty samples are visible, with the cursor lying on the cue marker in the middle of the screen. The Time window should display 00:00:00:01. The Video window should display the letter 'A'.
Move the cursor back in time (leftwards) by one sample. The Time window should change its display to 00:00:00:00, whilst the Video window should still show the letter 'A'.
Move the cursor forwards in time (rightwards) by one sample, so that it overlays the cue marker again. The Time window should change its display back to 00:00:00:01, whilst the Video window remains showing the letter 'A'.
Move the cursor forwards in time (rightwards) by one more sample. The Time window's display should remain at 00:00:00:01, but the Video window should now display the letter 'B'.
As can be seen from the above steps, the video's change of frame content occurs incorrectly one sample later than it should; the change of video frame content should occur simultaneously with the change of the frame number displayed in the Time window, which is at the point that the cue marker has been placed.
The practical effect of this issue is that it has caused the author a huge amount of extra work on an 89-minute long soundtrack-for-video timeline. There were over 1100 changes of shot which the author wished to mark by placing cue markers at the beginning of every shot. This should have been a quite simple process of enabling 'Snap to Frames', stepping through the video, and laying cue markers down by pressing F8 when the shot was seen to change.
Because currently the Video window (referencing the cursor laying over a cue marker
i that has been placed on the timeline using the 'Snap to Frames' option
) will actually display the end moments of the previous frame rather than the beginning moments of the current frame, laying down a cue marker when the shot is seen to change will actually place that marker at the beginning moments of the second frame of the new shot, not at the beginning moments of the first frame of the new shot, i.e. the cue marker placed will be one frame later in time than it should be. If it is wished for the cue marker to, as best it can, represent the beginning moments of the first frame of the new shot, it has to be manually repositioned so that it is at least a sample later in time than the time at which the shot has actually changed, in order for the Video window to correctly display the content.
The author had to manually reposition all 1100+ cue markers.
Ideally, the Video window should display a change of video frame in synchronization with the change of the frame display in the Time window, which occurs at the position of the 'Snap to Frames' point.
Part of the PC system's specification is detailed below:
Windows XP Professional Version 2002 SP3;
Adobe Audition 1.0 Build 3211.2;
Ad

obe Audition 2.0 Build 5306.2;
Adobe Audition 3.0 Build 7283.0;
ASRock 775dual-VSTA motherboard, BIOS Version P.3.00;
2.80 GHz Intel Pentium D Processor 915 2x2MB L2 Cache;
2GB DDRII 667 RAM;
Matrox G550 DualHead AGPx4 VGA card for Audition's two main work screens;
Matrox Productiva G100 MMS PCI VGA for two additional "static" information screens;
4 x PATA HDDs for OS & programs, swapfile & temp, project file sources, and guide audio;
Onboard Realtek ALC888 7.1 channel audio CODEC with High Definition audio;
Lite-On DVDRW LH-18A1P;
VIA OHCI Compliant IEEE 1394 Host Controller.
ASIO4ALL version 2.8;
Via Hyperion Drivers 5.16a - (VIA Chipsets INF Update Utility V3.00A, VIA PATA IDE Driver Package V1.90, VIA SATA IDE Driver Package V2.30A, AGP V4.60A);
Matrox PowerDesk-SE 11.10.400.03;
Matrox Millennium G550 Display Driver Version 5.99.005;
Realtek High Definition Audio System Software Version R1.91, Audio Driver Version 5.10.0.5605;
DirectX 9.0c March 2008;
Microsoft .NET frameworks 1.1, 2.0 and 3.0 with all service packs.

Just bought an iMac and use iCloud. calendar appointments on iMac are displayed 24 hours out of sync with the iPhone. the iPad and macbook air pick up the same information correctly. why is this?

just bought an iMac and use iCloud. calendar appointments on iMac are displayed 24 hours out of sync with the iPhone. the iPad and macbook air pick up the same information correctly. why is this?

Hi smokeondz,
Thanks for visiting Apple Support Communities.
If your iCloud calendar entries are not displaying as expected, start with the troubleshooting steps in this article:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Best Regards,
Jeremy

I reloading LR onto a new lap top. I have the orginal LR 1 disk with correct Serial #. I have downloaded it, every time I try to open the program I get the "Do you want to buy or I have a Serial Number Page". I fill out the page include the seria

I reloading LR onto a new lap top. I have the orginal LR 1 disk with correct Serial #. I have downloaded it, every time I try to open the program I get the "Do you want to buy or I have a Serial Number Page". I fill out the page include the serial # accept terms and enter. All fine and good seems normal. When I try to open LR I get the damn "Do you want to buy" page. I do I get past this BS?

What version of LR are you trying to activate? A serial number for LR 1 will not activate LR versions 2 - 5, but it will enable you to purchase LR 5 at the upgrade price and activate it.

Time evaluation generate check out entry

Dear Gurus,
How can we generate Check out entries thru Time evaluation?
The sales employees come to office in the morning, they punch in and leave for sales activity. They don't get overtime, but pay / absence quota deducted if they don't check in in the system.
While running Time evaluation, I am getting error in TE03 (delimiting error). I hv tried creating second entry using TF00. Its not working. Has anybody any solution for this?
Regards,
Vijay

Hi Gurus,
I am rephrasing my requirements. have 2 queries,
1. Sales Employees make only Clock In entries. System should generate the clock out entry or should not throw any error message. System should consider total working time from daily work schedule.
   - TE30 function is generated the entry in TEVEN table based on planned end time, but we need to create the entry in IT2012 otherwise, while processing next days entry, it generates error.
   - Will TF00 create an entry in Time Events IT2051 ? IF yes, how can I tweak TF00 rule to generate Time out entry.
2. General Staff working hours need to be calculated from Shift Start even if they come early. Max working time is 12 hours with 4hrs from start of end of Shift period
   - If shift start is 7AM, I have defining Start tolerance as 6AM to 7:05AM, but still the system is considering the Clock In time for hours worked.
I have to write this condition. How to write ?
   If Clock-in Time < Start Time
      Then   TIP->From = Start Time
I believe it has to be put in TL10 after rounding the Check in & check outs.. so as to update table TIP,
Please suggest,
Regards,
Vijay

My original Apple ID is associated with an email address that I no longer have access to. How do I reset the system to recognize my new email address as my primary point of contact and erase the other one?

My original Apple ID is associated with an email address that I no longer have access to. How do I reset the system to recognize my new email address as my primary point of contact and erase the other one?

If when you go to icloud.com and sign in with your current iCloud ID you see all your iCloud data there, you can safely sign out of the iCloud account on your Mac and choose Delete at all the prompts, then sign back in with the current ID. This only deletes the data from your Mac, not from iCloud. Your iCloud data will reappear on your Mac when you sign back in after a brief delay as it redownloads. If you have automatically imported your photo stream photos to your iPhoto library you won't lose them either (if you haven't, save them to your library first).
Again, only do this if when you go to icloud.com with your current ID you see your iCloud data there.

Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

Can a 128 ssd storage still effectively work if I install windows 8.1 plus msoffice and a window-based proposal system? I plan to buy a macbook air entry level with 1.7 gh i5 processor.

If you are going to use Mac OS X and its associated applications, and a BootCamp partition with Windows 8, and MS Office and all of the work created there, you will more than likely run out of space on a 128 GB SSD pretty quickly...especially if you put any music, photos or videos on it. Those things take a lot of space so you will have to be very, very careful about what you want to put on a 128 GB storage space. You would be better off going for 512 GB with what you plan on doing with it.

J_1IRG23D is not updating with Correct Excise DED Value,

Hi Friends,
I am new to the Excise duty , facing a proble in CIN -While doing MIGO, the Excise Calculation are coming correct values i(.e 10% ),but in the tables it was not updated correctly (J_1IRG23D) only one entry is showing wrong ,the other entries in the table are correct.
In table -J_1IEXCDTL the EXBED it was with correct value 10% of Base value
But In table -J_1IRG23D the EXBED It was updated with 0.006% on the base value .its gives wrong value
Kindly help in this issue.
Regards
Siva

Hi Siva,
J1IG is to create depot excise invoice.
you can update J-1IRG23D table in two ways-
MIGO > Create Rg23D
OR MIGO > No excise entry and then create RG23D entry via J1IG.
For more information on the same please gothrough -
http://help.sap.com/erp2005_ehp_06/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm
Regards,
Brinda

Why is audio out-of-synch with video on VOB files

I used a Pioneer DVR to import ~120 8mm and Hi8mm and Digital8 analog tapes to convert them to DVD's. These ~120 DVD's are in VOB format. These are 4:3 video (not HD). I did test this flow and didn't notice a few of the VOB's did not have the audio tracking properly.
When importing them into Premiere Elements 8.01 some of the VOB files have their audio out of synch with the video, yet, they play okay in the Premiere preview window.
Is there a setting so that when it 'conforms', that it will track the audio correctly?
Do I need to buy a conversion tool to go from VOB to mpeg-2 (or other format?) and then import to Premiere Elements 8?
Is there a better video editing tool to use?
I simply want to take all these 8mm tapes / DVD's to splice the best scenes.
I am running Windows 7 Ultimate 64-bit AMD Athlon II X4 630 2.8GHz processor, 4GB of DDR3 memory; and installed an ATI HD-4350 pcie gen2 graphics card. I have a memorex bluray dvd player.
Thanks, SJK.

I have NOT used those products, I only forward due to other mentions
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
$99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
$99 http://www.womble.com/products/mvw.html
$80 http://www.nchsoftware.com/prism/index.html
$75 http://www.videoredo.com/en/index.htm
$75 http://www.magix.com/us/movie-edit-pro/
$70 http://www.nchsoftware.com/prism/index.html Converter
$40 http://www.daniusoft.com/dvd-ripper.html#135
$40 http://www.deskshare.com/dmc.aspx Digital Media Converter
$00 http://www.squared5.com/ Converter
$00 http://www.erightsoft.com/SUPER.html Converter
$00 http://www.virtualdub.org/ Converter

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Media out or not loaded correctly when attempting to print since iOS 7 upgrade?

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

J_1IRG23D Table was not updated With Correct Values While Doing MIGO

Hi Friends,
I am new to the Excise duty , facing a proble in CIN -While doing MIGO, the Excise Calculation are coming correct values (i.e 10% ),but in the table it was not updated correctly (J_1IRG23D) only one entry is showing wrong ,the other entries in the table are correct.
In table -J_1IEXCDTL the EXBED it was with correct value 10% of the Base value
But In table -J_1IRG23D the EXBED,ADE,CESS It was updated with 0.06% on the base value .its gives wrong value
Kindly help in this issue.
Regards
Siva

Hi,
Go to T Code - J2I5 (not 215 it is j 2 i 5) enter details and select register PLA Check box and execute. This can be extracted many times - no problem.
After J2i5 balance will update in registers including tables.
Ramesh

Original and current budget together with PTD,ITD,MTD and YTD labor...

Hi experts:
I need a Project Accounting Report that shows Original and Current budget together with PTD,ITD,MTD and YTD labor amount, labor cost, non-labor cost, and revenue on the same line for all the task_id for a project. I know these are coming from these ,PA_BUDGET_VERSIONS V, PA_RESOURCE_ASSIGNMENTS A,PA_BUDGET_LINES L, main tables. But I am unable to break down the amounts according to PA and GL periods. Can anyone help please?
Thanks a million , in advance.

Help you with what?
No database version number.
No application name or version number.
No DDL.
Do you, for some reason, think we have any idea what PTD and ITD are? If so why?
Do you think we all have your version of a table named PA_RESOURCE_ASSIGNMENTS on our hard disks?
Perhaps you have some version of e-Business Suite. Perhaps you have SAP. Perhaps you have something we've never even heard of.
Your task is as follows:
1. If this question relates to an Oracle product change the subject of the post to "Please Ignore" and post your question in the correct forum.
or
2. Provide us with sufficient information that we can duplicate those portions of your environment required to understand what you are asking.

Entity Bean Rollback fails: caches are out of synch with the database

We are encountering a critical issue where the rollback of a session transaction rolls back any database changes, but doesn't roll back bean changes in memory. When we next access the bean, it returns information that should have been rolled back. The memory cache is out of synch with the database.
We have a simple session bean S, using container managed transactions. We also have an entity bean E using bean managed persistence. E has a single member <name>.
We implement a method s() in S with <trans-attribute> Required as follows:
public void s() {
Context lookupContext = getLookupContext();
SHome shome = (SHome) lookupContext.lookup(SHome.NAME);
S s = shome.findByPrimaryKey(thePrimaryKey);
System.out.println("-- current name = " + s.getName());
s.setName("IGNORE");
EJBContext ejbContext = (EJBContext) getContext();
ejbContext.setRollbackOnly();
Since this is BMP, the setName call issues our SQL update against the S record. When the session transaction rolls back, the database changes are also rolled back. But the entity bean in memory shows the modified name. We can see this in the next call to s() since the getName() returns IGNORE rather than the original value. We have also gotten debugged into the underlying instance cache associated with the S bean descriptor. I.e.
AbstractEJBHome ejbHome = (AbstractEJBHome) lookupContext.lookup(SHome.NAME);
AlternateHashTable aht = ejbHome.getBeanDescriptor().getCache();
Looking at this map of bean instances also shows that the bean instance for S is not rolled back.
From previous conversations with the server technologies team, we understand that during the transaction, we should be working on a cloned copy of the S bean. Upon rollback, the copies should be discarded rather than merged back to the cached bean. They seem to be merged regardless of rollback state.
We are using OC4J 10.1.3.0.0 (build 060119.1546.05277).

Actually, what one or the developers in my group found out is two things:
1) The clone is a shallow copy.They copy the references but not objects themselves. This has been causing problems for us.
2) It seems that you don't work on a copy and you work on the original and they keep a copy. Now, this is fine IF you don't have multiple threads working on the same Entity bean and we moved our application from Weblogic where it throws an exception if that Entity bean is in use to OC4J which is suppose to copy the bean and doesn't so you have multiple threads possibly modifying the same object.

AUTO PO print out creates spool with RFC user.

We have classic scenario where AUTO SRM PO print out spool is create with RFC user. While PO data is passing to R/3 is correct with correct user (created_by). Out put is created on the name with RFC user not with user who create SRM SC& PO. BADI BBP_CREATE_PO_BACK will help?

Hi Vishal,
Welcome to SDN.
Do they use custom PO SAPScript/Smartform?
If they do, you may want to check the print program (custom one) and the custom PO form. Perhaps there is some logic to set/display with the european decimal notation.
If they don't, you can also check the print program setting and do debugging (if necessary) to find out the logic to assign european decimal notation.
Hope this will help.
Regards,
Ferry Lianto
Please reward point if helpful.

Original ClockIn/Out entry alog with Corrections

Similar Messages

Maybe you are looking for