Original files not found, please help.

I am running iTunes 8.0.1.11, and I have about 11.5 gigs or so of music. Today I fired up iTunes and started skimming through songs like I often do, only to start playing a song and have the "original file not found" message pop up. I took a deeper look, and the majority of my 3200 songs show this message. There is no common factor between these songs, some are from the iTunes Store, some are from CD's, and some are from various mp3 services. In some cases, a few of the songs from a CD are missing, while others are present. Under "iTunes Music" in "My Music", the music folders (ie "Linkin Park") are present, but it appears that all the music has been deleted from in them.
I am a little miffed at this, because I had quite a few rare albums and EPs in my collection, and none of them were backed up.
Is there any way to get them back? Perhaps the file paths were changed? I hope that the music is still on the HD somewhere, and that I don't have to hunt down all these albums again. Any help would be great.

Sadly, I've been looking around for around an hour for an answer to this problem, yet to just waste time.
I have the same problem and can't find an obvious way to fix it. Nothing works without asking me to locate the file in my music folders. On my iPhone I have roughly 35-40 artists listed, on iTunes I have 9 that are listed in the music folder, only about 15 of my 349 songs work. Sadly, I can't update my iPhone until this is fixed, thank goodness for the wall charger! I've noticed that it made the songs that were "Un-checked" go missing and the "Checked" songs are perfectly fine!
This problem has been around for ages, this happened to me like a year ago on a different version of iTunes. Yet, I haven't seen APPLE mention anything about it, at least acknowledge it! If I find an answer I won't waste anytime and will post it immediately, but as for now APPLE <insert phrase>(I'm going to use the phrase 'is lazy')!
Message was edited by: King21092
Also I would like to add that it seems like my songs have disappeared from my HDD, amazingly! That or they have been moved somewhere else. I originally had the songs on my old dell, copied the songs to my new HDD for my new PC. Then that HDD went bad, so I moved it to my other HDD, so I have back-ups.

Similar Messages

Original File Not Found

I noticed after upgrading iTunes to the latest version that I am now getting the exclamation point and the error original file not found for over 70 CDs that I had in iTunes. These CDs were imported from my CD collection and the thing that I am finding is that not all tracks are deleted from every CD. The files are however also being deleted from my hard drive - when I do a search for the file it isn't found. I noticed when I import the CD again that the songs that are being deleted originally imported with different ID info (for example the album orginally said Disc 1 of 3 and now it says Disc 1.) I didn't change any of the ID info, but it seems that only songs with different ID info are being lost. It is like something is looking up the names in the background and deleting everything that doesn't match. Can someone tell me why this is happening and what I can do to keep this from happening in the future? Sorry for the long post.

I often get the same message, although mine is for a different reason I believe! I had Itunes on my H drive instead of my C drive at first and ran out of room very quickly, I moved it to my C drive and copied all the songs over to a new library, but now when I want to play them, I get the same thing as you described! ?

Moved my files to external hard drive, now files not found. Help?

My Itunes folder having outgrown my memory, I moved all the files to my external hard drive, following the directions in Itunes. I was able to play the songs as long as the hard drive was connected. However, I opened Itunes mistakenly without the E: Drive connected, and it opened blank, with no files in place. I closed, hooked up the hard drive, and opened Itunes again, holding down the shift key and choosing the library on E: (the xmp file). The files now show up, but when I try to play them, I get a message indicating that the file isn't found, do I want to find it? I can, but I don't want to go through 5000 files and add each one individually. If I try adding or importing the folder again, the file is simply in itunes twice. I can always import everything again, but I don't want to lose all my ratings, last-played, etc. It took a lot of time to listen to and rate all those songs. Any help would certainly be appreciated. Thanks.

I am having the same problem. I moved my itunes library to an external drive to free up the space on my notebook and now I "get files not found do you want to search" If I search I can find the song in Windows but have to find each song individually, I have 2600 songs I burned from my CD collection, it would take way too long. I have tried copying the file to the same drive, I have reintalled itunes multiple times. I have checked Apple and my computer is "authorized". Is there any way out of this? Otherwise I will be limited to just having the music I already have on my ipod and being unable to add any more, and if that ever bocomes compromised I would be unable to restore it. None of my music is purchased from itunes, it is all burned from my CD's.

Original File Not Found + m4a files not playing

When I try to play a song in Itunes, it says that original file no found. I have no changed anything in my setting and checked the file path in itunes properties and it is correct. Additionally, when I try to play files directly by clicking on them in the itunes files, it says an application can't be found. The files are m4a files. I was able to get them to play outside of itunes by manully setting quicktime as the application to play them, but they still don't play in itunes. Any help would be much appreciateted.

I often get the same message, although mine is for a different reason I believe! I had Itunes on my H drive instead of my C drive at first and ran out of room very quickly, I moved it to my C drive and copied all the songs over to a new library, but now when I want to play them, I get the same thing as you described! ?

"Original file not found" error after copying from removable hard drive

ok, I have all my itunes library on a removable hard drive, and I want to copy it all to my new computer. so, I plugged the hard drive in, copied all the files into itunes, and when I played one of them, it worked. then, I tried to play it again, but an error message came up saying "The song 'Re-hash'could not be used because the original file could not be found. Would you like tyo locate it?" and I clicked 'Yes'. then a browser came up, where i could select either the files itunes music, itunes library, or itunes music library. none of them work. help please?

This worked although it was very clumsy (we had almost 3,000 files that had to be deleted and redownloaded. I could not figure out a way to sort all of the 'exclamation points' together so it took an hour or so to scan through the entire library list and delete each file individually and/or in small groups.) The download was very straight forward. In my experience (with iTunes match turned on,) we did NOT loose our playcounts.
Going through all those files I noticed several common themes that may have triggered the problem: 1) multiple artists, 2) special characters in the song title, artist and/or album name - particularly umlauts (we have quite a few german songs in our library.) 3) very long title, artist and/or album names.
I hope that someone from Apple is aware of these issues and working on them....

Original files not found

Trying to free up space for more downloads, I dragged my iTunes folder over to my external hard drive. Now several (that's an understatement) files are not available because the original files can't be located. Using Time Machine, I restored the computer but the files still cannot be located. Please help!

Make sure your iTunes folder is intact and has everything you need for a library
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
In particular make sure it looks like the examples below:
Image of iTunes folder structure Dec. 2011 - https://discussions.apple.com/message/16923545
see also:
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605
This can be placed on either the internal or external drive, but it must be a complete package and not pieced together by dragginf items from different places.
If you have a complete package you can try starting iTunes, doing the option key thing as indicated earlier.

SAXParser type declaration not found - PLEASE HELP!!

I am using XML to parse an incoming string of XML. I want to use an SAXParser to do this, but I cannot create an object of this type. I have the jar file jaxp.jar, xalan.jar, and crimson.jar in my classpath.
Is there anything else that I need to do in order to get the parser to work.
This is a very urgent need so any help is appreciated. Here is the error:
Class SAXParser not found in type declaration;

I have figured out the issue. Thanks for the help. I do have one more issue though. I am trying to parse a string of xml data and I need to pass my parse() method an InputSource object that I guess I will make from my incoming String.
Any thoughts on how to do this?

I download itunes it says its successfully installed. then when i try to open it it says "apple application support not found" PLEASE HELP!!

I download itunes it says its successfully installed but then when i try to open it is says "Apple Application Support not found"

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Error: "the song...could not be used because the original file not found"?

Has anyone seen and resolved the issue from this error: "The song...could not be used because the original file could not be found"?
Thank you for your help

Yes, with no luck ... But I'm not exactly a computer tech. I searched with spotlight with no results.

Class not found********please help!

I'm trying to run my jsp application which imports two classes that i have saved in ROOT/WEB-INF/classes/business and ROOT/WEB-INF/classes/data. when I run the application by entering the url on the browser i get the following error. Does this mean the server cannot locate these two classes and what should i do to resolve this problem?
type Exception report
message Internal Server Error
description The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
/opt/jakarta/tomcat/work/localhost/_/replace$jsp.java:3: Package business not found in import.
import business.*;
^
/opt/jakarta/tomcat/work/localhost/_/replace$jsp.java:4: Package data not found in import.
import data.*;
^
2 errors
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:284)
at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:546)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:177)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:189)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:382)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:474)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:201)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2344)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:164)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:462)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:163)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1011)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1106)
at java.lang.Thread.run(Thread.java:479)

Sorry for taking long to reply but here is the code for both packages. The main aim is to write information captuired from a form into a file.
Package business
package business;
public class User{
private String Msisdn;
private String Nimsi;
public User(){}
public User(String msisdn, String nimsi){
Msisdn = msisdn;
Nimsi = nimsi;
public void setmsisdn(String m){
Msisdn = m;
public String getmsisdn() { return Msisdn; }
public void setnimsi(String n){
Nimsi = n;
public String getnimsi(){ return Nimsi; }
package data;
import java.io.*;
import business.*;
public class UserIO{
public synchronized static void addRecord(User user, String filename)
throws IOException{
PrintWriter out = new PrintWriter(
new FileWriter(filename, true));
out.println(user.getmsisdn()+ "|"
+ user.getnimsi());
out.close();
}

Trouble downloading itunes 64 bit. when i click the link it says webpage not found. please help!

Having trouble downloading itunes 64 bit on windows 7. When i click download it brings me to a "webpage not available" page. Please help!

The servers are likely overloaded. Try again in a few hours.

(OSStatus error -50.) video files not playing please help

I own a Nikon D300s, I have been downloading video from it for quite a while without any issues, but today when I tried to open some of my video clips I received the error code below...
*The movie could not be opened*.
Operation could not be completed. (OSStatus error -50.)
I am curious if anybody else has had this problem and how can I solve it?
I posted it here because all my clips are Quicktime AVI logos. All the video that works show the start of the clip.
HELP!!
thanks

I just got a new MBP yesterday and have perian, but i cannot open an .mkv file that could on my old computer. I have the most recent version of perian, this should be working. If anyone has any idea what OSStaus Error -50 means, please tell me and help me fix it because a new computer is supposed to work BETTER than the one that was four years old and couldn't run iTunes at the same time as Pages.

'Integration Class not found' - Please help

Hi Guys
My EM from browser stopped working unexpectedly.
What happens is when I start login in, I can't move over login screen, no error messages displayed on browser screen. I use IE.
Here is what I find in emoms.log:
1510 2006-10-30 14:42:32,062 [Orion Launcher] ERROR app.Co
ntextInitializer contextInitialized.256 - Integration Class n
ot found: oracle.sysman.ocs.mntr.target.OcsOvfIntegration
1511 2006-10-30 14:42:32,062 [Orion Launcher] ERROR app.Co
ntextInitializer contextInitialized.256 - Integration Class n
ot found: oracle.sysman.ocs.mntr.target.OcsWebconfIntegration
1512 2006-10-30 14:42:32,078 [Orion Launcher] ERROR app.Co
ntextInitializer contextInitialized.256 - Integration Class n
ot found: oracle.sysman.ocs.mntr.target.OcsWirelessIntg
1513 2006-10-30 14:42:32,078 [Orion Launcher] ERROR app.Co
ntextInitializer contextInitialized.256 - Integration Class n
ot found: oracle.sysman.ocs.mntr.target.OcsCalGrpIntegration
1514 2006-10-30 14:44:23,015 [HttpRequestHandler-6627600]
ERROR sec.auth doLogon.207 - Error logging on:
1515 java.lang.NumberFormatException: multiple points
1516 at java.lang.FloatingDecimal.readJavaFormatString(F
loatingDecimal.java:1067)
I tried to recompile package as it say in:
http://forums.oracle.com/forums/thread.jspa?threadID=337544&tstart=0&messageID=1356947#1356947
but only received message back:
ORA-04043: object MGMT_AUDIT_LOG does not exist
Is there anyway for me to fix this problem without database re-installation?
Thank you, Gene.

Hi guys
Thank you for your support.
Here is an answer on your question Ugonic.
( I use mks tools ksh port for windows 2k)
Here is an output: ls C:/oracle/10/Db_1/opmn/bin
ons.exe onsclient.dll
C:/oracle/10/Db_1/opmn/bin> ./ons -help
Usage: .\ons [-d]
-d Daemon mode: forks and detached OPMN server process
-a <admin command> Please type ".\ons -a" for usage
I guess ons is a replacement of opmnctl on version 10.
I could not find opmnctl on my SUSE installation neither.
Now, I tried to experiment with em by using different URLs:
http://127.0.0.1:5501/em this is a loopback ip
http://10.104.3.79:5501/em this is my current ip
http://n513gg0_d1:5501/em this is my pc name
on
netscape 8.1.2 ( by the way problem started when i - stupid me - upgraded it from 8.1 to 8.1.2)
ie 6.0.280
On netscape: all 3 commands do not work.
ie: first two commands work and display all em functionality and the last one which uses my pc name - does not.
I did not mention to you that my pc uses dhcp and from what I read em DOES NOT like it. It likes permanent address.
I beleive I came accross of 2 problems:
1. netscape 8.1.2 is an uncompatible browser for em application.
2. name resolution does not work well with em. The proof for the last is error when I use http://n513gg0_d1:5501/em on ie, it does not trunslate it to ip address.
I also went to page: http://n513gg0_d1:5501 and displayed page:
Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)
At the end of it I found test examples for:
JSP
servlets
Each group provides multiple exampls. It's interesting that no netscape neither ie are not able to work with all JSP examples.
For now I will be working with ie for em and I beleive problem is solved - you should be progmatic because dhcp/em/browser compatibility is too much to worry as long as it works.
My only concern - and I only study oracle - that I view it as a major architectural flaw in Oracle 10 - this dependence on em windows interface.
One can say: "you can do the same from command prompt" But how many of us who is learning Oracle or who used to use an old ie will be able to use command interface efficently specially when you need to react fast?
And, if Oracle provides such a great tool and wants you to use it heavily, don't they have to provide a separate installation option for just a re-installation of em itself ?
I was about to scratch my test installation and re-install it again. Would it be an option in production environment?
Thank you guys for your help and I with best to you.
Gene.

Problem saying song could not be used because original file not found

Hi,
I updated itunes to 10.1.1 over the weekend and now my libray has massive problems. Most of my older music has an exclamation mark next to it and when I try and play it, it says "Song cannot be used because orginal file could not be found".
I have tried to reload the content but the same problem persists, this is really annoying to say the least. What can I do.
Thanks

Solution may be found if you search in the "More Like This" section over in the right column.

Build of DC fails libraries on classpath are not found - Please Help

HI Guys,
I am trying to build an ejb dc.
There are no errors showing up in NWDS but when doing an Development Component -> Build the Build fails with the errors here in the log - how can I make sure the libs are found at compiletime?????
DC Model check:
   All used DCs are available locally
   validating dependency to build plugin "sap.com/tc/bi/bp/ejbmodule"
   validating dependency to public part "default" of DC "sap.com/ejb20"
   validating dependency to public part "default" of DC "sap.com/jdbc20"
   validating dependency to public part "default" of DC "acdc.de/pinguin/service/dic"
   validating dependency to public part "default" of DC "sap.com/configuration"
   validating dependency to public part "default" of DC "sap.com/connector"
   validating dependency to public part "default" of DC "sap.com/mail"
   validating dependency to public part "compilation" of DC "acdc.de/pinguin/ext/lib"
   validating dependency to public part "default" of DC "sap.com/jms_provider"
   validating dependency to public part "default" of DC "sap.com/jmsconnector"
   validating dependency to public part "default" of DC "sap.com/jms"
   validating dependency to used DC "apotheker.com/cape/base/external/lib"
   validating dependency to used DC "apotheker.com/cape/base/utils"
   DC model check OK
Start build plugin:
   using build plugin: sap.com/tc/bi/bp/ejbmodule
   starting build plugin from : D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\ejbmodule\_comp\gen\default\public\ejb\
Build Plugin 'EJBModulePlugin', Version 7.00 SP 3 (NW701_03_REL, built on 2008-12-17 16:25:56 CET, CL51263)
   development component: pinguin/service/ejb (acdc.de)
      software component: MyComponents (demo.sap.com)
                location: local
                    type: J2EE, subtype EJBModule
           build variant: default
         output location: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\gen\default
       generation folder: C:\Documents and Settings\user\.dtc\LocalDevelopment\t\F77C06E96830A119E56EFB0EDB243F25
       plugin start time: 2011-12-02 18:28:55 GMT+01:00 (CET)
                 Java VM: Java HotSpot(TM) Client VM, 1.4.2_12-b03 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Checking path lengths for sources
Path length checks finished in 0.016 seconds
Preparing data context..
No public part descriptor found for component "ejb20" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "jms_provider" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "jmsconnector" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "jms" (vendor "sap.com"), public part "default", using legacy mode.
No 'default' JDK defined, will use running VM.
Data context preparation finished in 0.094 seconds
Creating Ant build file..
Creating output file: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\gen\default\logs\build.xml
Using Java class:     com.sap.tc.buildplugin.BuildEJBModule
Build file creation finished in 0.046 seconds
Starting Ant..
Using build file:     C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\gen\default\logs\build.xml
Using build target:   build
Using Ant version:    1.6.2
compile:
      [echo] Start SQLJ Pre-processing
      [sqlj] Using catalog:xml/file/C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\dic\_comp\gen\default\public\default\lib\java\acdc.de~pinguin~service~dic~default.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\ejb20\_comp\gen\default\public\default\lib\java\ejb20.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jms_provider\_comp\gen\default\public\default\lib\java\sapjms.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jdbc20\_comp\gen\default\public\default\lib\java\jdbc.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jms\_comp\gen\default\public\default\lib\java\jms.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\ext\lib\_comp\gen\default\public\compilation\lib\java\acdc.de~pinguin~ext~lib~compilation.jar;C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\ext\lib\_comp\gen\default\public\compilation\lib\java\paygate-1.0.2.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jmsconnector\_comp\gen\default\public\default\lib\java\jmsconnector.jar;D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\servlet\_comp\gen\default\public\default\lib\java\servlet.jar
      [sqlj] translation finished
      [sqlj] 0 warnings
      [sqlj] 0 errors
     [timer] SQLJ Pre-processing finished in 0.828 seconds
      [echo] Starting Java compiler
      [echo] Settings:
      [echo]         debug: on
      [echo]      optimize: off
      [echo]   deprecation: default
      [echo]       verbose: default
      [echo]      encoding: UTF8
      [echo]        source: default
      [echo]        target: default
      [echo] source paths:
      [echo]       C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule
      [echo]       C:\Documents and Settings\user\.dtc\LocalDevelopment\t\F77C06E96830A119E56EFB0EDB243F25\gen_sqlj
      [echo]    class path:
      [echo]       C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\dic\_comp\gen\default\compilation\lib\java\paygate-1.0.2.jar
      [echo]       D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\jmsconnector\_comp\gen\default\public\default\lib\java\jmsconnector.jar
      [echo]       D:\usr\nwds\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\SAP-JEE\DCs\sap.com\servlet\_comp\gen\default\public\default\lib\java\servlet.jar
      [echo]    output dir: C:\Documents and Settings\user\.dtc\LocalDevelopment\t\F77C06E96830A119E56EFB0EDB243F25\classes
     [javac] Compiling 163 source files to C:\Documents and Settings\user\.dtc\LocalDevelopment\t\F77C06E96830A119E56EFB0EDB243F25\classes
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:21: package com.hp.cape.persistence.exception does not exist
     [javac] ERROR: import com.hp.cape.persistence.exception.FinderException;
     [javac] ERROR:                                          ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:22: package com.hp.cape.persistence.exception does not exist
     [javac] ERROR: import com.hp.cape.persistence.exception.PersistenceException;
     [javac] ERROR:                                          ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:23: package com.hp.cape.persistence.exception does not exist
     [javac] ERROR: import com.hp.cape.persistence.exception.RemoteServerException;
     [javac] ERROR:                                          ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:24: package com.hp.cape.persistence.filter does not exist
     [javac] ERROR: import com.hp.cape.persistence.filter.FilterCondition;
     [javac] ERROR:                                       ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001CustomFacade.java:96: cannot resolve symbol
     [javac] ERROR: symbol : class RemoteServerException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin001CustomFacade
     [javac] ERROR:   protected Object getHomeStub() throws RemoteServerException
     [javac] ERROR:                                         ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule
     [javac] ERROR: symbol : class RemoteServerException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin001Facade
     [javac] ERROR:   protected acdcPinguin001SB getacdcPinguin001SB() throws RemoteServerException
     [javac] ERROR:                                                   ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001Facade.java:192: cannot resolve symbol
     [javac] ERROR: symbol : class FinderException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin001Facade
     [javac] ERROR:   public acdcPinguin001DTO findByPrimaryKey(BigDecimal id) throws FinderException, PersistenceException
     [javac] ERROR:                                                               ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin001Facade.java:192: cannot resolve symbol
     [javac] ERROR: symbol : class PersistenceException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin001Facade
     [javac] ERROR:   public acdcPinguin001DTO findByPrimaryKey(BigDecimal id) throws FinderException, PersistenceException
     [javac] ERROR:                                                                                ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule
     [javac] ERROR:                                                                                ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModulePersistenceException
     [javac] ERROR:                                                                                ^
     [javac] ERROR: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\ejbModule\de\acdc\pinguin\facade\acdcPinguin002Facade.java:389: cannot resolve symbol
     [javac] ERROR: symbol : class PersistenceException
     [javac] ERROR: location: class de.acdc.pinguin.facade.acdcPinguin002Facade
     [javac] ERROR:   public acdcPinguin002DTO update(acdcPinguin002DTO data) throws PersistenceException
     [javac] ERROR:                                                          ^
     [javac] WARNING: Note: Some input files use or override a deprecated API.
     [javac] WARNING: Note: Recompile with -deprecation for details.
     [javac] 100 errors
Error: C:\Documents and Settings\user\.dtc\LocalDevelopment\DCs\acdc.de\pinguin\service\ejb\_comp\gen\default\logs\build.xml:158: Compile failed; see the compiler error output for details.
     at org.apache.tools.ant.taskdefs.Javac.compile(Javac.java:938)
     at org.apache.tools.ant.taskdefs.Javac.execute(Javac.java:758)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
     at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
     at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:58)
     at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:196)
     at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:168)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
     at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
     at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
     at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
     at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
Ant runtime 1.265 seconds
Ant build finished with ERRORS
Compile failed; see the compiler error output for details.
Error: Build stopped due to an error: Compile failed; see the compiler error output for details.
Build plugin finished at 2011-12-02 18:28:56 GMT+01:00 (CET)
Total build plugin runtime: 1.562 seconds
Build finished with ERROR

Hi Saurabh Agarwal,
I have double checked this. removed and added the relevant libraries but no luck.
the build log says that it can not find
     [javac] ERROR: C:\Documents and Settings\admitsepedollhofer1\.dtc\LocalDevelopment\DCs\acdc\some\service\ejb\_comp\ejbModule\acdc\some\facade\AcDcSome001CustomFacade.java:21: package com.ap.cape.persistence.exception does not exist
     [javac] ERROR: import com.ap.cape.persistence.exception.FinderException;
Build Path looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
    <classpathentry kind="var" path="JRE_LIB" sourcepath="JRE_SRC"/>
    <classpathentry kind="src" path="ejbModule"/>
    <classpathentry kind="src" path="gen_sqlj"/>
    <classpathentry kind="src" path="/LocalDevelopmentcapebaseutilsap.com"/>
    <classpathentry kind="var" path="TSSAP_JAVAX_HOME/lib/ejb20.jar"/>
    <classpathentry kind="lib" path="D:/Projects/some/0/DCs/ap.com/cape/base/utils/_comp/gen/default/public/compilation/lib/java/ap.comcapebaseutilscompilation.jar"/>
    <classpathentry kind="var" path="SAP_LOGGING_LIB_HOME/lib/logging.jar"/>
    <classpathentry kind="var" path="SAP_SYSTEM_ADD_LIBS/comp/SAP-JEE/DCs/sap.com/com.sap.engine.client.lib/_comp/gen/default/public/default/lib/java/sapj2eeclient.jar"/>
    <classpathentry kind="src" path="/DV2_some_Dsomeservicedicacdc.de"/>
    <classpathentry kind="var" path="SAP_EXCEPTION_LIB_HOME/lib/exception.jar"/>
    <classpathentry kind="lib" path="/DV2_some_Dsomeextlibacdc.de/libraries/paygate-1.0.2.jar"/>
    <classpathentry kind="lib" path="/DV2_some_Dsomeextlibacdc.de/libraries/commonsNet.jar"/>
    <classpathentry kind="lib" path="/DV2_some_Dsomeextlibacdc.de/libraries/jakarta-oro-2.0.8.jar"/>
    <classpathentry kind="var" path="TSSAP_JAVAX_HOME/lib/jms.jar"/>
    <classpathentry kind="var" path="TSSAP_JAVAX_HOME/lib/mail.jar"/>
    <classpathentry kind="var" path="SQLJ_RUNTIME"/>
    <classpathentry kind="lib" path="D:/Projects/some/0/DCs/ap.com/cape/base/external/lib/_comp/gen/default/public/compilation/lib/java/CapeJ2eePersistence.jar"/>
    <classpathentry kind="lib" path="D:/Projects/some/0/DCs/ap.com/cape/base/external/lib/_comp/gen/default/public/compilation/lib/java/CapeUtilities.jar"/>
    <classpathentry kind="lib" path="D:/Projects/some/0/DCs/ap.com/cape/base/external/lib/_comp/gen/default/public/compilation/lib/java/Cape.jar"/>
    <classpathentry kind="output" path="bin"/>
</classpath>
How can I make sure that the libraries are included in the build process?

Original files not found, please help.

Similar Messages

Maybe you are looking for