Original iPad screen resolution

I've noticed that since I upgraded my wifi to xfiniti blast, super fast wifi, my original iPad screen resolution is much crisper, and clearer, cleaner...
Is the screen resolution and images on original iPad affected by a stronger , faster wif signal?
Or is it sometimes not as crisp and clear due to overheating?

Are you using a cloud-based browser like Opera or iSwifter? This is the only way I can conceive your Internet connection affecting clarity.

Similar Messages

  • Is your iPad screen resolution good enough?

    I'm just curious. I don't have an iPad, but I am thinking about getting an iPad2 WiFi. I really like my retina display on my iPhone 4, but playing with friends iPads I don't seem to care much about the resolution difference. But, since I've only used one for +/- 10 minutes total maybe screen resolution is something that annoys you later?
    Everything I have been reading about the screen is a complaint about it not having retina display. Some people are so upset they're going to wait until a model with a better res comes out before buying their first iPad. That seems dramatic to me. I think people are asking for everything, but want the price point of half that. So, is your iPad screen resolution good enough for you? Or is it a LEGITIMATE problem that interferes with usability.

    Everything I have been reading about the screen is a complaint about it not having retina display
    And the complaint is only that it does not have one.
    It's not that the current display is poor and it needs to be better.

  • Original ipad screen font size has increased so content doesn't fit in window.

    the font on my ipad (5.1.1) screen has suddenly increased in size so all the content doesn't fit in the window. I can't figure out how to restore the default font size. Any ideas?

    That's the problem when you start new threads for the same
    question... typos
    creep in. I think you mean
    www.exornocreations.com
    Did you try what Murray suggested replying to your post
    earlier today?
    Jo
    "same_X" <[email protected]> wrote in
    message
    news:eeejf2$70d$[email protected]..
    > OK , first of all, i am a newbie, and i have to admit,
    this question was
    > posted
    > already today under different subject line.
    > It just shows, how desparately i need some help.
    > The first time I've got one reply, but it's not helping
    so far, so here is
    > the
    > question again:
    > My site is based on a Dreamweaver standard CSS template
    (left side - page
    > navigation, right side - the content. )
    > Everything looks great on my mac (in IE 5.2, Safari
    & Firefox). Everyting
    > is
    > in the right place & working fine.
    > However, on other computers, when the pages open, one
    can see only the
    > page
    > navigation on the left + the empty space where the text,
    tables & images
    > should
    > be seen.
    > The content is suddenly placed all the way down at the
    bottom of the page.
    > I try reajusting, window width, font size, class width,
    but it's not
    > working.
    > Can someone help me with some usefull tips?
    > www.exornocreeations.com
    > many thanx,
    > same
    >
    >

  • Ipad screen resolution

    Hi all,
    I had developed a app (not a game) an elearning content with the size 940(w)x620(h). When I published the content for ipad, it shows the white spaces with the size of 1024x768. How to avoid that remaining spaces over on the app? Is it possible to run the app in a specific size like a popup?

    lllaass wrote:
    People have said that when on 3G you get SD but HD on wifi when using the YouTube app on the iPad.
    You are correct.
    Try this with a wifi connection. Open Safari and use this URL for YouTube:
    http://m.youtube.com
    You can toggle between SD and HD videos on YouTube.

  • Check ipad mini 2 screen resolution

    Hello ,
    i juste bought an used ipad mini 2 and i want to check the screen resolution to make sure it wasn't replaced by a non retina one
    thank you

    So was the screen replaced? Was it the actually the display or just the glass front replaced?
    If it was replaced by apple then it will defiantly be a legit screen then same as the original
    If your just looking for the specs they are here:
    https://www.apple.com/uk/ipad-mini-2/specs/
    Retina display
    7.9-inch (diagonal) LED-backlit Multi-Touch display with IPS technology
    2048x1536 resolution at 326 pixels per inch (ppi)
    Fingerprint-resistant oleophobic coating

  • Trying to upgrade OS on an original iPad.  Screen is locked showing iTunes/USB cable icons.  Connected to iTunes and get an error 3014 message stating it cannot be restored and screen is locked in this mode.  How do I unlock?

    Trying to update OS on an original iPad.  Connected to iTunes -- screen is locked showing iTunes/USB cable icons.  iTunes says must restore to default settings, but receive an error message 3014 that this cannot be done.  Cannot unlock screen to use nor can I update or restore, so iPad not usable at this point.  How can I unlock screen so I can use iPad, how do I fix this error?  Latest version of iTunes is downloaded and I've followed all the instructions in regard to Windows.  I'd at least like to unlock iPad so it can be used.  Thanks.

    bummer. *Note that if you are actually running iOS 5.1.1, that's it for the iPad 1st Gen.
    Resolve iOS update and restore errors - Apple Support
    ÇÇÇ

  • Original iPad black screen spinning

    I still have my original ipad and it is stuck on the black screen with a spinner. I tried pressing the two buttons which will show a black screen with an apple but then revert back to the black screen with a spinner. I tried connecting it to my Macbook Pro and kept getting the error "itunes could not connect to this ipad. could not save the pairing record'
    any ideas or is it dead?

    Hey there livvylove2000,
    It sounds like your iPad keeps getting to this screen with the spinning wheel on it and you cannot even restore it. Resetting the device by holdign the Home and Sleep/Wake buttons is where I would have started as well. Next I would put the iPad into Recovery Mode with this article, to see if that then allows the iPad to be restored and used again:
    If you can't update or restore your iPhone, iPad, or iPod touch
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. 
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I have the original iPad and today 2 inches of the screen went to all color lines. Cant' work or play?

    I have the original ipad. Today 2 inches of the screen went to straight color lines. Can't change it! Can't read or work. HELP!!!! Please : )

    Sounds like hardware failure.
    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Just updated my iPad 2 to ios7 and now my screen resolution is terrible...

    I tried rebooting several times, but it didn't help. Everything else seems to be working fine. Any suggestions?

    Diavonex 
    This helped meRe: Just updated my iPad 2 to ios7 and now my screen resolution is terrible...     Jan 4, 2014 10:50 PM    (in response to Batsy2000) 
    Try restore iPad
    http://support.apple.com/kb/ht1414
    Backup before you do it.
    Just tried this...did not work. Resolution is still horrible. This is not an issue of it just not looking smooth or sharp.  It's so much worse than that.  It was actually fine right after the update.  The next morning when I turned it on it was messed up.

  • I have the original iPad was working completely fine earlier today tried to use it now screen is blacked out... What do I do?..

    I have the original iPad was working completely fine earlier today tried to use it now screen is blacked out... What do I do?..

    not sure if you are referring to a hardware failure...but here are the initial things you should try
    http://support.apple.com/kb/TS3281

  • How do I change the screen resolution on my Dell PC back to the original setting after itune change ?

    How do I change my Dell PC screen resolution back to the original setting after itune resolution changes

    Hi penguin05,
    Welcome to Lenovo Community Forums!
       First without the projector connected
               Right click on your desktop screen and select "Screen Resolution"
                 you will get this page
    Spoiler (Highlight to read)
    Now Connect your projector and make sure that the display is now on your projector.
       under Display: Set it to your projector
                 -Change the Orientation: to Landscape View then hit Apply.
    Let me know your findings
    Regards
    Solid Cruver,
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • What screen resolution in iPad 3?

    What screen resolution in iPad 3?

    Welcome to the Apple Support Communities
    A 3rd generation iPad has got a 2048x1536 resolution, the same as a 4th generation iPad. This is because both include Retina display

  • My screen resolution for iPod touch got out of spec.  Looks like iPad sized

    Tonight I was updating about 5 apps (not sure which ones) and all of sudden something changed my screen resolution on my iPod Touch. The icons look to now be sized for an iPad.  I can no longer actually access anything on my iPod as nothing fits on my screen. 
    As you one can imagine I am very annoyed. 
    Any ideas?
    Thanks
    Scott

    Scott,
    See this article for more information.
    http://support.apple.com/kb/ts3129
    B-rock

  • Changed the screen resolution, wont return to original

    Hi, i was changing my screen resolution and i made a mistake and choose a resolution that my screen doesnt support, i waited the 15 seconds to return to the normal and nothing happened. I cant seem to set it back to the original.
    Appreciate the help!

    Turn off your Mac holding the Power button. Then, turn it on and press Command, Alt, P and R keys while your Mac mini is starting, so you will do a PRAM reset. This will reset the screen resolution, so the display should be working

  • 18 month old original i-pad switches on but screen resolution not good and can only just see the icons has the screen gone?

    18 month old original i-pad switches on but screen resolution not good and can only just see the icons has the screen gone?

    No could just make this out and it is up full

Maybe you are looking for

  • SAP_FND_TC_T_X1 Catalog not showing up in Launchpad. Please Help

    Hi SCN,       Im implementing SAP Fiori Approve Request. I'm on a Hub Deployment. My problem is I'm not able to see SAP_FND_TC_TX1 Catalog on the Launchpad. I'm I supposed to create it manually? And the add the tile? On the other hand I see that I ca

  • Apple Wireless keyboard eating batteries

    I've an Apple aluminium wireless keyboard and a Magic Mouse. My keyboard's batteries last less than a week. I've seen this problem posted long time ago, but not clear solution now. Can anyone help

  • Xy graph automatically moves down

    Hi,,,, I've got a problem. I have the XY graph and I would like the graph automatically moves down while running program. If u guys have ever seen the monitor of a roller testbench, Im working with a guidance system for a driver, using LabVIEW to cre

  • Changing Payroll Areas

    Hello guys: I have 8 different payroll areas with the same periodicity and same payment date. If I change all EEs IT 0001 and use only one payroll area (the same for everybody); are there going to be any problems with the cluster? I am planing on usi

  • How to create a amplitude against freq graph?

    Hi, Iam new in labview. I measured amplitude from my DMM connected through GPIB. I also measured is freq result. How can i plot a graph of amplitude against freq plot?(something like a freq response plot). I do not know how to change the the x-axis o