Original IPAD won't turn on

My original IPAD will no longer turn on tech support suggested holding the home button and power button at same time this did not work.
At a loss if battery is dead seems to cost more to replace or repair than it  is worth.
Any ideas or subbestions?

This is Apple's support site for an unresponsive iPad. Take at look at it.
http://support.apple.com/kb/TS3281
You have tried a few steps already, but you might be able to bring it back by restoring it, assuming that the battery is not dead. Pay attention to the last link  the one that says if the iPad is not recognized in iTunes,

Similar Messages

  • My original iPad won't turn on

    I have an original iPad running on ios5 I seem to remember, and it won't turn on.
    ios5 was the last operating system I could install on this iPad I believe
    When plugged into a wall charger I get the apple logo flashing on and off.
    If I hold the home button and off button down I can get the logo asking to be connected to ITunes.
    As soon as I pull the lead out of the charger and plug it to my PC the iPad is dead, I get nothing.
    There doesn't seem to be enough charge from the pc to get the iPad up running again. (usb works just fine with my 5 other apple products).
    I have usb's on the front and back of my PC, none will bring the iPad back to life.
    It doesn't matter if I leave the thing on charge all night with the wall charger , it won't charge.
    What can I try next ? 
    Thx

    I could take it in if I wanted to pay for their expertise yes, but that's what these forums are here for...to find out how to fix it.
    It would seem that my 'fix it' revolves around finding someway to boost the charging current to the iPad whilst remaining connected to the pc.
    If I could get more current than the 100ma available to the ipad I can connect to itunes and from there install a new operating system which is the fix for the flashing logo.
    I looked at something like this : RAVPower RP-UA01. This seemed to be the answer however,
    Having viewed the youtube video it seems it only charges OR connects to upload data via a toggle switch. I need both.

  • I have a new ipad.  I can't get support without my serial number.  Ipad won't turn on.  I ordered it from Target so I have no receipt.  I can't get telephone help without serial number.  What to do?

    I have a new ipad.  I can't get telephone support without my serial number.  The ipad won't turn on.  I order it from Target and there is no serial number on the invoice.  How can I get telephone help without serial number?  Please help!

    The Serial Number is on the back of your iPad.

  • TS3274 my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    my ipad won"t turn off. there is a small window with an email text in it and it appears frozen on the screen. How can i turn the ipad off?

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • My ipad won't turn on. Have tried to reset by pressing the two button at the same time. It work. Why is this happening? For the first time it happened to me after using the ipad 4 running on ios 7, for almost a year and a halftime

    My ipad won't turn on. Tried to reset and it work. I'm using ipad 4 with ios 7 and this is the first time that this happened to me.what is wrong with the ipad?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • TS3274 What do I do? My iPad won't turn on at all.

    What do I do? My iPad won't turn on at all even if i put it to charge.

    Have you tried resetting your iPad?
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • TS3274 My iPad won't turn on and pressing the top button won't help

    My iPad won't turn off, it was charged and suddenly turned off and won't turn on on again, I tried holding down the top button but nothing happened. What will I do?

    Have you tried forcing a reboot? Hold down the sleep and home keys for about 20 seconds. If you see the silver apple it's rebooting and it may com back that way.

  • Ipad won't turn on, and reset won't work ??

    My Ipad won't turn on, tried a reset but still nothing, any ideas??

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My ipad won"t turn on and it worked this morning before work

    i used my ipad this morning before work to check emails, etc.. then turned off and went to work. Now I am home and have 10 minutes to my self and it won't turn on. I plugged it in, I think it was running low battery wise, but it is doing nothing. When I plugged into computer, the computer isn't noticing it is there.

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • I updated to iOS 8.2 on iPad 2 my iPad won't turn on. What can I do?

    After I updated my iPad 2 to iOS 8.2, my iPad won't turn on, it just stays on a loop where it shows the apple logo, does the screenshot effect then darkness. I tried connecting it to iTunes to reset it but my computer can't read it. What can I do?

    Hello David,
    Thank you for contributing to the Apple Support Communities.
    It sounds like you're not able to use iMessage on your iPad. You've tried some good troubleshooting steps, and I'd recommend these additional steps:
    Turn off iMessage and FaceTime and restart
    Go to Settings > Messages and turn off iMessage.
    Go to Settings > FaceTime and turn off FaceTime.
    Restart your device.
    Turn iMessage and FaceTime back on.
    Still not activated after an hour? 
    It might take a few minutes to activate iMessage and FaceTime. If you've waited more than an hour, try these steps:
    Make sure that your device has the latest version of iOS.
    If you're using an iPhone, contact your carrier to make sure that you can receive SMS messages.
    Contact Apple Support.
    From:
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    Best Regards,
    Jeremy

  • My ipad won't turn on and I can't restore it because itunes needs me to input my security code and I can't because it's a gray screen

    my ipad won't turn on and I can't restore it because itunes needs me to input my security code and I can't because it's a gray screen

    Try doing a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.

  • My ipad won't turn on.  i don't know why. i tried rebooting it but it didn't work. help.

    my ipad won't turn on. i tried rebooting it but it didn't work. i don't know what happened. can anyone explain why happen to my unit?

    When you say a reboot do you mean a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Happened to me once, about 6 months ago, and a reset got it working again.

  • HT4623 ?My iPad won't turn on.

    My iPad won't turn on. It was fine when i put it down and now it will not come up. It is charged and should power up.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Ipad won't turn on itunes can't connect error OxE800024

    ipad won't turn on itunes can't connect error OxE8000024

    This Apple doc has some tips that can help you fix that problem -> iOS: Unknown error containing '0xE' when connecting to a Windows PC
    If it won't turn on, you could try connecting it to another power outlet or computer.

Maybe you are looking for

  • Program speeds up System time?

    Hi, im writing an animation program in swing that loads and displays images in a seperate thread. there is a variable sleep time in between display times (because of a timestamp on the image). the wierd thing is that when I output the timestamp to a

  • How to get list of HTML5 features used by a Edge Project

    Hi All, Is there a way for me to know what all features of HTML5 does my Edge project actually use. I know there are a lot of sites which tests what all HTML5 features are supported by a browser, but I want to know which all features are being used b

  • One .png  - make some items in .png a link?

    Hi Im using Dreamweaver 8 and I am working with a .png file. I would like create a hyperlink to some of the items within the .png . For instance the picture is that of my friends and myself. We all have our own websites and I want each person in the

  • BC4J - reverse generation - not all entities and views in same package

    Hi I want to use reverse generation, but separate all entity objects in package (my.entities) and View Object and view links in (my.views) not all in one package. I can do this by generating entities first and then creating view objects and view link

  • DirectAccess Network Adapter Error

    I have setup DirectAccess on 2012R2, and keep getting the following error after setting up the configuration. Error: DirectAccess clients cannot connect to all resources on the corporate network. Causes: Routes required to send packets to the corpora