Original IR samples for the Space Designer convolution reverb presets?

I would really appreciate it if anyone could point me to where I could get the original IR samples for the SD presets. For some reason mine failed to load. My logic 9 version is current.

I started with Logic 9, so my updates are not far in between, but I used to be a Logic/PC user. I have the current version but I could still boot up Logic 9 if I wanted to. I think a lot of strange things would happen if I updated from earlier versions, like say 6 or 7. But see, this was what I was saying: When you download the update, you are dowloading the whole program. So that when you install the new version you are still left with the old. For safety reasons, I do not delete the old versions.
The only problem I have are the IR files. I've compiled other IR files but I want the original ones for comparison, among other things.

Similar Messages

  • Changing sample rate corrupted space designer.... somehow.... HELP!

    This is a new one to me, so it's very difficult to explain whats happened. I'll start from the beginning.
    I created a new, blank logic file with a sample rate of 96.
    I created a new software instrument and began to fill it out, adding some compression, some eq, and a little bit of reverb. The reverb came from space designer, using the small room preset "Thicken Vocals". So far so good. No problems, everything's working fine.
    I open Reason to rewire in (and ultimately track and record) some drum samples out of reason. The sound is coming out of reason into an aux bus in Logic, and that aux bus is being used as the input for a new audio track. I lay down some midi notes, play back the drum audio out of Reason and hit record on the audio track, essentially making an audio file of the drum samples coming out of logic.
    During this, something happens. Rewire is doing a LOT of work balancing the sync, the sample rate, etc.... and somehow, SOMETHING freaks out in the space designer i was using as some subtle reverb for my software instrument in logic (this software instrument is UNRELATED to the Reason audio).
    Now, when i hit play, the space designer just produces a loud, annoying pop. If I CHANGE the space designer preset, everything is cool. If i change it back to "Thicken Vocals" under small rooms.... POP.
    Worse, it seems to be a permanent problem.
    SO --- Ive done a LOT of trying to figure out whats going on. I create a new document and recreate the software instrument. I browse to Thicken Vocals... POP! I tried to replace the IR that "thicken vocals" is referencing by overwriting the file from a system backup I have (an IR called "0.03s_Room Vocals")... still no dice.
    Here's where it gets strange. It works FINE if the sample rate is 44.1... I can browse to "Thicken Vocals" and it loads up and init's fine, and everything is golden. As soon as I go to 96, or load it up when the document is set to 96, that's when it freaks out. NOW, if i adjust the falloff curves of the reverb just enough, THEN it suddenly works again, even under 96k.
    So, in a nutshell, at 96k, when I load "thicken vocals"... it almost appears (even according to the waveform Space designer draws) to misread the IR waveform, and it plays back as a POP. If I adjust the Falloff curve, it corrects itself, and the waveform even redraws! At 44.1, there are no problems.
    I did NOT have this problem before... does anyone have ANY clue what could be tweaking my system right now? I can post more details if I haven't posted enough... including pictures.
    THANKS!!
    Chris

    You might have a corrupted song file. Possibly your autoload as well. Try trashing logic prefs and rebuilding you autoload. Also, repair permissions and maybe even try updating the prebinding in the terminal. Another possibility could be a conflict with the driver of the Audiowerk8, unlikely, but possible.

  • Problems with the Space designer

    Forgive my poor English on this, i don't really know how to explain this but:
    When i record a guitarpart with a delay made in the space designer, i hear 'cracks' in my headphones and on my monitors (looks like the sound when a recording is clipping but the input signal is low enough)
    When i play back the recorded part, or when i bounce it, i don't hear a thing.
    It's pretty annoying when your recording, because sometimes i start playing off-tempo because i get destracted to much by the cracks.
    Is there any solution to it, or is my computer just too slow?
    I'm running Logic Studio on a Macbook,1.83 Ghz, 2 gig ram, 250 gig hd, 5400 rpm.
    Should i try recording on my external 7200 rpm drive instead?

    What do you use for the arped delay? I can imagine if this is a stereo delay and the sound comes back at periods at the same time (because it is in tempo) it will crack at certain points some how (volume doubling). Maybe try to switch the phase on the delay one channel (if stereo). Still remains odd it doesn't crackle when you play it back though...

  • How can i exchange for the new design

    Last year my sister purchased a ipod shuffle 3rd gen, for my 10 yr old daughter. She bought it from Target and spent $145.00 at that time. Shortly there after i became aware apple had replace this 3rd gen shuffle with a new design. One that is more user friendly, especially for my 10 yr old. I have to say we have been very disappoint with her ipod for several reasons.
    1. there is no face so you cant see what your doing
    2. you must memorize the amount of clicks in order to operate it.
    3. we have only been able to upload new music to her ipod once since she got it a year ago. Even with online tech support,reading online forums,owner manuals, help from family and friends. To no avail.
    She has it still in the box neatly packed away. Its used as a show piece on her dresser to show that she has an (ipod). Neadless to say she does not use it,does not  like it mainly because there is no display panel which make it very difficult for her to function.
    So how can i exchange/replace the old design ipod shuffle generation 3  for the new design.

    Try disabling your firewall and try again.

  • I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download

    I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download / install them. Clicking the update button results in an error message "Application Manager has stopped working". This is a windows system running 64 bit Windows 7

    update manually:
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2014 updates:  win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)

  • Unable to reset sample for the equipment task list.

    Unable to reset sample for the equipment task list. Example: Equipment task list has been created on 01.10.2007 & inspection lot is created on 10.12.2007 which requires the changed in the inspection characteristics

    Hi Sandeep,
    You may change the Inspection charecterstucs and save the Task List.
    After that u have to reassign that task list to the Lot. for that Trasaction code is QAC3 give the lot no. and enter
    , without doing anything save it. now go to QA02 and reassign the task list and sampling procedure. and save it.
    Now u may do RR as per ur new charecterstics.
    Regards,
    Neeraj Bhadauria

  • How can I buy apple watch  for the space black stainless steel case and the black sport band for one order?

    How can I buy apple watch  for the space black stainless steel case and the black sport band for one order?

    Unfortunately no. I asked the same question when I went to the local Apple Store for my "try on" and as of now you would have to order the watch with the metal link band and the black sports band separately.

  • [svn:fx-trunk] 11540: Adding a bunch of ASDoc samples for the following classes:

    Revision: 11540
    Author:   [email protected]
    Date:     2009-11-06 14:27:40 -0800 (Fri, 06 Nov 2009)
    Log Message:
    Adding a bunch of ASDoc samples for the following classes:
        ColorBurnShader.as
        ColorDodgeShader.as
        ColorShader.as
        ExclusionShader.as
        HueShader.as
        LuminosityMaskShader.as
        LuminosityShader.as
        SaturationShader.as
        SoftLightShader.as
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo rBurnShader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo rDodgeShader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Colo rShader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Excl usionShader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/HueS hader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Lumi nosityMaskShader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Lumi nosityShader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Satu rationShader.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/supportClasses/shaders/Soft LightShader.as

  • What is the keyCode for the SPACE BAR?

    Greetings one and all. I am having trouble finding the
    keyCode for the Space Bar, does anyone know what it is? Is there a
    list somewhere for keyCodes? I have found ASCII charts but the ones
    that I have found do not list space or the arrow keys.

    bobthree wrote:
    > Greetings one and all. I am having trouble finding the
    keyCode for the Space
    > Bar, does anyone know what it is? Is there a list
    somewhere for keyCodes? I
    > have found ASCII charts but the ones that I have found
    do not list space or the
    > arrow keys.
    Hi,
    Just another 'key' application
    http://www.adobe.com/support/director/how/show/keyboardlingo.html
    regards
    Dean
    Director Lecturer / Consultant / Director Enthusiast
    http://www.fbe.unsw.edu.au/learning/director
    http://www.multimediacreative.com.au
    email: [email protected]

  • Space designer and Reverb with EWQL Goliath samples

    I'm currently using Logic 9 for sequencing.
    Alot of the samples I use in recording are from EW-QL Goliath as a plugin for Logic.
    Given the 'Play' engine has a reverb facility and other kinds of articulations and effects you can apply is there much use to using Space designer in Logic? I'm not sure if Play Engines is vastly superior or not.
    Would it be better to simply set up the reverb within the Play engine and then record to in Logic OR record an unaltered sample (e.g. violin) from Play and then add reverb using space designer/ Logic's other reverb plugins?
    Perhaps using them both in conjunction even?
    I am writing alot of orchestral music at the moment so trying to decide on how to apply reverb to my tracks at the moment.
    Thanks.

    This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
    There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
    So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
    And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
    Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way.

  • RFCs for the Query Designer

    Hello experts,
    does anyone know the RFCs which the Query Designer use? (NW04s SP10)
    Thanks in advance for your help.
    Best Regards,
    Marcel

    Hi Edwin,
    I tried to use this function modules, but it seems that they have bugs, also the transaction rscz, because I copied a query and the copy is different to the original query.
    Any suggestions for RFCs for adding characteristics to row, columns and so on?
    Thanks in advance!
    Best Regards,
    Marcel

  • With Adobe Flash, the image is looking for a "zoom" setting and does not find it. The result is that the imbedded image is too large for the space allowed. Is there a zoom setting for Firefox?

    When running FB game apps, the image loaded is too large for the FB space. The program looks for a "zoom" setting and does not find it. This was from the error screen. I have not been able to locate where the image zoom is located (found the font adjustment). I am new to FireFox and would like to sort this out please.
    Your installed plug in assume Shockwave Flash 10.3, but I thought it was Adobe Flash 10.3. Are they one and the same?
    Below is the warning message from the Error Console

    I'm not sure the CSS warning is relevant to Flash. Maybe adjust your overall zoom level on Facebook manually from the View menu?
    View > Zoom
    If you have the orange Firefox button, tap the Alt key to display the classic menu bar.

  • Local Repository User Rights for the Data Designer

    Hello,
    we are using the Data Services with 4 users and one local repository stored on the server.
    Is it possible to hide in the Data Designer foreign objects and projects from other users in the local repository? What's the best practice for that, for every user a seperate repository or to restrict the repository rights with the cmc?
    Our system:
    Windows Server 2008
    Data Services 4.0 SP1
    IBM DB2 9.7 (Repository)
    Thanks for some tips and hints!

    Hi Alexander,
    At any point in time, you should only have one user connected to one repository in Designer.
    If two users are using the same repository at the same time, then there is a risk of corruption of repository objects.
    Best practice is to have a repository for each (concurrent) developer and a central repository for version management.
    Depending how testing is organised, you might also need to have repositories for unit test / QA (UAT) and finally a production repository.
    For good measure, an additional central reposotiry for production can be valuable:
    - if development for new project start before the 'previous' project has gone into live.
    - You can prepare go-live by checking in all the objects required for live into central-production first.
    - It's the final safety measure, if objects in production are corrupted and dev/test systems have modified versions.
    So, a typical landscape would look like this:
    DEVELOPMENT:
    n number of development repositories, one for each developer
    1 test repository (local)
    1 dev central repository
    TEST
    1 UAT repository (local)
    PROD
    1 PROD repository (local)
    1 central repository
    Jan.

  • Spaces labels other than numbers for the spaces

    Seems to me that if would be nice to have custom labels for the various workspaces instead of just a number. a number prefix is fine as that helps the keyboard shortcut to jump to the space. but a name and even a color for the menu on the menu bar would help.

    Post Author: V361
    CA Forum: Formula
    Record number from CR will count all the records.  You could use a running total, and reset on change of group.

  • Logic's presets for compression/space designer, etc.

    Hey
    Do you guys/gals find the presets worthwhile or do you tend to tailor your compressors/reverbs, etc.?
    Most of my vocals feel like they need something to bring them out and I'm wondering what you all tend to do with Logic's effects.
    Steve

    hi, it's all song/style/situation specific.
    especially with comps and eq's.
    SD is a great tool, and there are many, many 3rd party IR's to download or buy.
    of these i use the knock offs from Lexicon, TC, EMT, etc.
    they're more even.
    some of the real halls and spaces are a little colored for my present projects.
    noisevault and echochamber are good sites for free downloads.
    best, DR9.
    PS: re vox, if your mic doesn't cut it, you'll waste a lot of time correcting it later.

Maybe you are looking for