Original iSight with intel Mac Pro

Just bought an original iSight off ebay (in pristine condition!) Hooked it upto to my Mac Pro, it worked for about 15 seconds then switched off... does any one know if there is a driver for intel macs to get this beautiful camera to work with it?
Many thanks,
Ben Collier

Hello Ben.
You can test your external iSight using the suggestion in How to test your iSight to ensure it is functional.
All iSight drivers, including everything you need for iChat AV, are built into your Mac OS and Apple applications, but you should be using the latest versions.
Update to 10.4.10 as follows:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• Then download and apply the Mac OS X 10.4.10 Combo Update v1.1 (iNtel).
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
If you have enabled automatic checking in System Preference... > Preferences > Update Software > Check for updates:, your OS X 10.4 system software will automatically notify you of any necessary updates required for your iSights and the software that uses them.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

Similar Messages

How can I enable 16 outs from Logic with Intel Mac Pro?

Hi everyone,
I am a bit new to the digital output world! I have a Digi002 with Logic 7 and I have a Behringer A/D converter box to recieve digital output using optical cable. My question is this: I can only see 8 normal stereo outputs plus additional 9-10 output. Is there a command in Logic (as per the old "enable 16 in/outs in 5.5)to allow the greyed out extra outputs to work? or I am being very stupid and not enabling some command on the Mac?
I thank you all in advance for any kind responses!

I see you're using a Behringer A/D converter. I had one of these once. It made a lot of noise: crackling, pops etc. I know that was the cause as they only happened on those 8 tracks.
I may have had a lemon, but if you get similar problems, (and I hope you don't) I have changed to the Alesis AI3 and now have no problems, it might be worth you making a mental note.

Anybody figured out how to get Piclens to work with Intel Mac Pro Safari ?

That doesn't work either.

The 3.0.4 and earlier Debug menue now has a different parameter name in 3.1.
Start Terminal, copy and paste in the following line and press return.
defaults write com.apple.Safari IncludeInternalDebugMenu 1
Start Safari and feel good
Additionally I restored 3.0.4 with Time Machine cause the Debug menues are a bit different.

My recent purchase of QuickTime 7 Pro for Mac OS X upgrade doesn't do "screen record" on my Intel Mac Pro with system 10.6.8. Apple won't accept responsibility and refund my money.

My recent purchase of QuickTime 7 Pro for Mac OS X upgrade doesn't do "screen record" on my Intel Mac Pro with system 10.6.8. Apple won't accept responsibility and refund my money.

QuickTime 7 doesn't offer that, but the built-in QuickTime X Player does. You may find another use for the key.
(109709)

Is OCZ Vertex Turbo 60GB 2.5" SSD compatible with my Mac Pro, or do I need

Is OCZ Vertex Turbo 60GB 2.5" SSD compatible with my Mac Pro, or do I need the Vertex Mac Edition?
I have decided to purchase a SSD to use as a boot drive in the spare optical drive bay.
There are so many brands available, and Intel X25-M 'G2' seems generally to be the most highly rated overall. However, there is virtually no stock of 80GBs in the UK at present, except at extortionate prices, and I don't need 160GB.
Kingston SSDs are very reasonably priced, but seem to be a bit of an unknown quantity, although I rate their DDR3 memory very highly.
I have visited the websites of several manufacturers, and read various online reviews, and the recently introduced OCZ Vertex Turbo has had some good reviews, albeit on PC forums.
At the moment I can buy the 60GB Turbo for £170.66 inc.VAT from ebuyer.com, whereas their price for the standard Vertex 60GB is £193.99 inc. VAT, which seems very strange!
When I googled "OCZ Solid State Drives +UK", Amazon UK appeared on the listings, but there was a footnote which said " not suitable for use on Mac".
OCZ list a Vertex Series Mac Edition on their website, and that is why I am asking this question.
Unfortunately, there are no UK listings when I google the Mac Edition, and I am hoping that somebody of the ilk of "the hatter" or "samsara" will be able to answer my question.
If anybody else is using the Vertex Turbo in a Mac, I would be very grateful for your input. Likewise if you have had bad experiences with OCZ SSDs.
If I wait 3-4 weeks I should be able to buy an Intel X25-M G2 80GB for round about the same price as the Vertex Turbo 60GB, i.e. if prices remain the same as currently being quoted by vendors who are out of stock.
All input will be very gratefully received. If it is positive, I will go ahead and order a Vertex Turbo from ebuyer, in case they run out of stock (which is 16 at present).
Many thanks in anticipation, guys!

Hi Samsara,
Many thanks for your advices once again.
60GB will be more than adequate as my boot drive. At the moment I am using a VelociRaptor 300GB, and I have used less than 30GB of space. That is after reinstalling all my applications and software, and includes all my files, folders, and printer drivers etc.
I have utilised under 50GB of the original 640GB hard drive, but that includes a lot of photo images which I imported into both iPhoto and Aperture.
When I receive my Agility EX SSD I will clone from the VelociRaptor using Super Duper, and I will then set up a 4 drive RAID 0 using 4 VelociRaptor 300GB disks. That set up should suit my needs for many years to come, even when I eventually upgrade from Photoshop Elements 8 to CS5.
I will back up the Agility EX to the 640GB hard drive using Super Duper Smart Update, and that will be my spare boot drive.
The 4 drive RAID 0 will be backed up to the My Book Studio Edition II 2TB, using Time Machine.
In your experienced opinion, do you think that set up will be satisfactory?
The Agility EX is actually the latest generation of OCZ SSDs, and it is one of only 2 models in their "Maximum Performance" range, whereas the original Agility was only a "Mainstream" model.
The key factor is that the Agility EX uses single-level cells (SLC), instead of multi-level cells (MLC). It is second only to the Vertex EX Series in terms of performance per GB in the OCZ range of SATA 2.5" Solid State Drives.
In very recent reviews it has outperformed both the Vertex Turbo and Vertex 120GB models from the OCZ "Performance" range in most of the test benchmarks.
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/24507-ocz-agility- ex-60gb-ssd-review.html
http://www.phoronix.com/scan.php?page=article&item=oczagilityex&num=1
http://www.guru3d.com/article/ocz-agility-ex-ssd-60gb-review-test/3
The above are just a few of the very favourable reviews of the Agility EX SSD.
I preferred to buy a 60GB SLC, rather than a 120GB MLC, because SLCs reputedly have 10 times more life expectancy, and performance wise per GB there is no comparison.
Only time will tell if I have made the right decision!

Help! Problem with my Mac Pro! :(

Im having a strange issue with my Mac Pro it freezes and gets stuck during startup and the OSX never starts, the spining gear gets stuck. First i thought it was the memory so i used the apple hardware test. Then i tryed the hard drive in another computer and it worked. The thing is that is not working in my machine
I have a Mac Pro (Early 2008) computer with 8 gb of Ram and a Nvidia Geforce 8800 GT
KERNEL PANIC sign twice and i couldnt do anything. The message i got is this one.
As far i could understand it has something to do with the NVIDIA driver right?
Does anybody know how to solve this problem since I dont know what to do...
Thanks a lot!
Diego
Wed Oct 19 09:18:44 2011
panic(cpu 0 caller 0x001A8C8A): Kernel trap at 0x685cb15b, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x000000bc, CR3: 0x00e7f000, CR4: 0x00000660
EAX: 0x56279630, EBX: 0x07c18004, ECX: 0x07daa800, EDX: 0x00000000
CR2: 0x000000bc, EBP: 0x56279668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x685cb15b, CS: 0x00000008, DS: 0x07da0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x56279408 : 0x12b0f7 (0x458124 0x5627943c 0x133230 0x0)
0x56279458 : 0x1a8c8a (0x461650 0x685cb15b 0xe 0x460e00)
0x56279538 : 0x19ece5 (0x56279550 0x9 0x56279668 0x685cb15b)
0x56279548 : 0x685cb15b (0xe 0x48 0x56270010 0x68600010)
0x56279668 : 0x685d2f44 (0xc1d00001 0x2000000 0x2000003 0x40)
0x562796c8 : 0x685c7ecf (0x56279858 0x6 0x0 0x0)
0x56279828 : 0x685bb012 (0x0 0x600d600d 0x7027 0x56279858)
0x562798e8 : 0x6878e54b (0xc1d00001 0x2000000 0x2000003 0x40)
0x56279918 : 0x6879798f (0x479bf000 0x2000000 0x88100090 0x3e)
0x5627b8a8 : 0x6877bc6e (0x479bf000 0x2000000 0x15 0x479bf01c)
0x5627b9a8 : 0x685b5572 (0x479bf000 0x0 0x5627bab2 0x80)
0x5627ba08 : 0x564275a5 (0x7d8e400 0x0 0x5627bab2 0x80)
0x5627bb38 : 0x56428d74 (0x7d8e400 0x5642c358 0x5627bbec 0x4)
0x5627bc08 : 0x56463133 (0x7d8e400 0x1 0x0 0x13)
0x5627bc68 : 0x5645c93a (0x7d8e400 0x5 0x5 0x83b64e0)
0x5627bc98 : 0x40ebc5 (0x7d8e400 0x83b64e0 0x83b64e0 0x0)
          Backtrace continues...
      Kernel loadable modules in backtrace (with dependencies):
         com.apple.NVDAResman(5.2.6)@0x685b4000->0x687f3fff
            dependency: com.apple.iokit.IONDRVSupport(1.5.2)@0x56421000
            dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x562fc000
            dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x56454000
         com.apple.iokit.IONDRVSupport(1.5.2)@0x56421000->0x5642efff
            dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x562fc000
            dependency: com.apple.iokit.IOGraphicsFamily(1.5.2)@0x56454000
         com.apple.iokit.IOGraphicsFamily(1.5.2)@0x56454000->0x5646ffff
            dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x562fc000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9C2031
Kernel version:
Darwin Kernel Version 9.2.1: Tue Feb 5 23:08:45 PST 2008; root:xnu-1228.4.20~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)

Are you booting from the DVD as follows:
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
What happens when you try this? Do you still get the kernel panic? If so, then there is a hardware failure. It could be the video card but it could also be caused by a defective memory module. You might try running the hardware test:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
If this fails as well, then you will need to take it in for repair.

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

Intel Mac Pro w/10.4.7 - I need to access a 2003 Western Digital hard drive

Hey another question for the gurus of Mac out there. Got an Intel Mac Pro running 10.4.7 and I need to access old information from someones else's Western Digital (internal/ external w/case) drive. It's a "WD1200JB-00RCA1" model drive from 2003. I've already tried using the case with firewire connection on both my laptop and Mac Pro, but it will not mount. I does get power though. I'm thinking of trying it internally, but know that the Mac Pro is picky about specific types and specs on drives. Just curious if anyone thinks I can make it work internaly without screwing up the drive or more importantly, the Mac Pro.
Apparently this same drive was used internally on a mac back in 2003, but obvioulsy an older Mac. Any tips appreciated.

That drive (according to WD) is a WD Caviar SE 120GB UDMA 100 IDE drive. Assuming everything is set-up correctly, external enclosures typically require the drive to be jumpered as and IDE master, then it should mount.
The fact that it doesn't mount is not a good sign.
You could try this internally in the spare optical drive bay - you'd need a 5.25" to 3.5" mounting kit. If I were to go this route, I'd disconnect the optical drive temporarily - the cables will reach better and you stand less chance of getting an IDE bus incompatability with the optical drive.
I think the default set-up for the MacPro IDE bus is Cable Select so you may need to look into jumpering the drive dor this (CSEL)

FaceTime with a Mac Pro

iSight is no longer available. Does anyone have experience with using the new FT beta with a Mac Pro? What cameras have worked, which ones have not?
thanks

any mac compatible web cam: http://www.mac-compatible-web-cam.com/
If you already have a Mac-compatible DV camcorders, it can work, too.
More info at http://discussions.apple.com/thread.jspa?threadID=2018211
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Game controller for intel Mac pro

Any suggestions for a game contoller for an intel Mac pro? I've had no luck with tatieboggle or with the Logitech f710 wireless. Running latest system. Thanks!

For three years I have been trying to get a reliable connection with the F710 for each OSX update. The macgamepads.com and tattiebogle.net solutions do not actually work for extended gaming experiances. In short OSX is lacking REAL controller support. And as long as I have had my Mac Pro it has always been that way.
There is a reason why people don't play games on Mac. I have a SSD drive dedicated entirely to Windows 8 Bootcamp because playing even the most simplistic game on a Mac is a god **** nightmare. You want the F710 to work? Get a PC or run Bootcamp - DON'T PLAY GAMES IN OSX.

Final Cut Pro 5.1 on Intel Mac Pro

Hi,
I have been running successfully Final Cut Pro 5.1 on my intel Mac Pro.
Suddenly it stopped working. While opening, it suddenly quit. Tried to fully uninstall Final Cut following Apple HOWTO and reinstall. Unfortunately, Final Cut is still not working.
I have read lots a various messages and no-one seems to have a 100% success rate.
Anyone has a suggestion?
Cheers
Ben

someone posted something on Craigslist about the intel Macs and he said that the intel just freezes up with FCP and some other programs
Older versions of FCP do NOT run well on IntelMacs because they were written to run on PPC chipped Macs only. Probably the situation you read about on Craigslist. The OP here is running the universal version of FCP so that shouldn't be an issue in this case.
-DH

Trying to load pre-2006 lso files into Logic 8 on my new intel Mac Pro

I'm trying to load pre-2006 lso files into Logic 8 on my new intel Mac Pro, but they crash the app every time. files saved 2006 and later load OK. Anybody shed any light on this or know of a fix (other than the laborious work-around of re-saving all early lso's in logic 8 on the PPC and physically moving them via a portable drive to the new machine)?
(BTW, those files also crash the Logic 7 installed on the intel Mac.)

Upon further work with my migration, I find I was incorrect in the time frame assertion of these failed files: apparently, the creation/modification dates have nothing to do with it and the reality is that some files fail at random, while others load just fine. right now it looks to be about 50/50 Beats me why this is.
Anyway, for those interested, I've discovered a very helpful key to the quick processing of file data for a plethora of files (i. e. re-saving the "bad" lso files as Logic 8 projects on the older CPU and moving them over to my new machine), and that is the 'control key/launch' of the app. I hadn't realized that Apple had added this feature to Logic to enable easier work on multiple song files when one does not require the audio.
For those who don't know about it, the 'control key/launch' provides an option to disable the core audio at app start-up, thus allowing files to load instantly without loading the plug-in library files associated with tracks - great for copying MIDI data between song files, or in this case, re-saving a batch.
Still puzzled, though, as to why so many older lso files crash Logic when they attempt to load on my new CPU.

IMovie plug ins not compatible with Intel Macs

I need a page turn transition for an iMovie 6 project I'm working on. I downloaded one from cfx, but apparently a lot of the plug ins are not compatible with Intel Macs. Anyone out there have any suggestions?

Any GeeThree plug-in that uses flash will no longer work, which include all the WildFX plug-ins. Apple did away with flash support in Quicktime 7.3.1 or newer! Now iMovie is basically unusable without the very cool & professional GeeThree plug-ins. If Apple keeps this up iMovie will probably go the way of the dinosaur. I've talked to Apple about this and they responded "why don't you buy Finalcut Pro". It's what Apple does best, Farm the base.....
Ken

FCP, Intel mac pro crashing

SO here is the set up
Dual 2.66 Intel mac pro, 4gb ram, system drive is 500gb, AV drive is over fibre channel.
OS is 10.4.8 FCP 5.1.2
all is fresh install on new system, working good for the first week.
The issues are when I go to render out I get maybe to 75% then the system crashes, get the screen that tells me I have to hold down the power button etc.
The project file contains 1 stream of DV footage and 1 Livetype movie, seems to not like the live type, but crashes with or without it, just faster with.
On a side note a second issue has been trying to burn to dvd, it will crash the same way, after completeing 25-50%, making coasters.
this isuue is present in both machines we have which are identical.
I also have one of them with the loud fans, straight out of the box, reminded me of my old g4 dual 1.25 mdd.. Firmware is up to date on it. Both machines are new within the last 2 weeks.
here is the crash report.
Date/Time: 2006-10-17 15:35:14.346 -0500
OS Version: 10.4.8 (Build 8L2127)
Report Version: 4
Command: Final Cut Pro
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Parent: WindowServer [60]
Version: 5.1.2 (5.1.2)
Build Version: 3
Project Name: FCPApp
Source Version: 609211640
PID: 244
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x000069b0
Thread 0 Crashed:
0 com.apple.FinalCutPro 0x0000a424 VEFrames2TimeCode + 292
1 com.apple.FinalCutPro 0x00020c86 DispatchHashDict(KGDictSelector, KGDictInt*, KGDictParams*) + 4336
2 com.apple.FinalCutPro 0x00105e53 KGDictTransferC(KGDictInt*, KGDictInt*, KGDictTransferType, Path*, Path*) + 177
3 com.apple.FinalCutPro 0x00105e8c pKGDictTransfer(KGDictInt*, KGDictInt*, KGDictTransferType, ...) + 50
4 com.apple.FinalCutPro 0x0034cb75 pKGClipNewFromItemsFull(KGDictInt**, KGItemSpec*, double*, long, KGClipNewFlag, KGDictInt**) + 10939
5 com.apple.FinalCutPro 0x0034d3dd pKGClipNewFromItems(KGDictInt*, KGItemSpec*, long, unsigned char, unsigned char, unsigned char) + 153
6 ...Pro.Plugins.Timeline Editor 0x08aac6bf TLSetCenterFrame(TimelineViewRecord*, unsigned char, long) + 16843
7 ...Pro.Plugins.Timeline Editor 0x08abcec6 TLShowReelDupes(KGDictInt*) + 3878
8 ...Pro.Plugins.Timeline Editor 0x08ad6d2d DisposeMenuStrings() + 53723
9 com.apple.FinalCutPro 0x001108a2 pKGDragMouseMove(KGPoint*, KGDragRefRec*) + 826
10 ...FinalCutPro.Plugins.Browser 0x0866c7db ComputeLayoutInfo(BrowserRec*) + 7745
11 ...FinalCutPro.Plugins.Browser 0x08671c39 ComputeLayoutInfo(BrowserRec*) + 29343
12 com.apple.FinalCutPro 0x00275c43 PPassMouseEvent(KGPanelRecord*, KGDictInt*, long) + 1483
13 com.apple.FinalCutPro 0x0027ed91 pKGPanelMessage(long, long, KGDictInt*, KGViewRecord*) + 97
14 com.apple.FinalCutPro 0x0023049d ServicesPanelsMessageProc(long, long, KGDictInt*, KGPanelRecord*) + 109
15 com.apple.FinalCutPro 0x00231773 BrowserMessageProc(long, long, KGDictInt*, KGPanelRecord*) + 101
16 com.apple.FinalCutPro 0x002753fb pKGPanelWindowProc(long, long, KGDictInt*, void*) + 53
17 com.apple.FinalCutPro 0x0028a09b pKGSendWindowMessage(KGWindowRec*, long, long, KGDictInt*) + 93
18 com.apple.FinalCutPro 0x00140353 HandleMouseDown(OpaqueEventRef*) + 2443
19 com.apple.FinalCutPro 0x00140b47 DoEvent(OpaqueEventRef*, KGDictInt*) + 685
20 com.apple.FinalCutPro 0x003cd341 Events(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 69
21 com.apple.HIToolbox 0x92dd686b DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1093
22 com.apple.HIToolbox 0x92dd5f10 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 304
23 com.apple.HIToolbox 0x92ddd1f0 SendEventToEventTarget + 56
24 com.apple.HIToolbox 0x92ddd683 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 1169
25 com.apple.HIToolbox 0x92dd6c22 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2044
26 com.apple.HIToolbox 0x92dd5f10 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 304
27 com.apple.HIToolbox 0x92ddd1f0 SendEventToEventTarget + 56
28 com.apple.HIToolbox 0x92e210c7 ToolboxEventDispatcher + 81
29 com.apple.HIToolbox 0x92e1fadf RunApplicationEventLoop + 165
30 com.apple.FinalCutPro 0x0013cfb4 KGMainEvent(void*) + 46
31 com.apple.FinalCutPro 0x0028dccf main + 59
32 com.apple.FinalCutPro 0x00002fc6 _start + 228
33 com.apple.FinalCutPro 0x00002ee1 start + 41
and
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x000069b0 ebx: 0x00000001 ecx: 0x30ef9a21 edx: 0xbfffdab4
edi: 0x20d211b0 esi: 0xbfffdc6c ebp: 0xbfffdad8 esp: 0xbfffda9c
ss: 0x0000001f efl: 0x00010246 eip: 0x0000a424 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
any help would be mucho appreciated!
cheers
-David

So I was getting prepared to reinstall the OS and all the software, decided to dig a bit more first. Looked at this log
Wed Oct 25 12:43:48 2006
panic(cpu 3 caller 0x003A1D25): getPhysicalSegment() out of 32b range 0x1001fd000, len 0x1000, class IOGeneralMemoryDescriptor
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x47c03398 : 0x128d1f (0x3c9540 0x47c033bc 0x131df4 0x0)
0x47c033d8 : 0x3a1d25 (0x3ed64c 0x1fd000 0x1 0x1000)
0x47c034a8 : 0x39f8b1 (0x6f27380 0x0 0x47c034ec 0x3bc21c)
0x47c03508 : 0xc8deff (0x64747a0 0x6f27380 0x0 0x5ed230b8)
0x47c03578 : 0xc7c50b (0x6472600 0x64af500 0x0 0x1a1ec0)
0x47c035a8 : 0x5fa88b (0x651e300 0x7033900 0x47c035cc 0x47c035c8)
0x47c035d8 : 0xc38cec (0x651e300 0x7033900 0x0 0xc39020)
0x47c03648 : 0xc3646c (0x6525c00 0x6f27380 0xde5e868 0x0)
0x47c036c8 : 0x51a020 (0x65a8380 0x6f27380 0xde5e868 0x0)
0x47c03768 : 0x51d38b (0x6df5300 0xcbd0d000 0x1b 0x6f27380)
0x47c037e8 : 0x522da1 (0x6df5300 0xcbd0d000 0x1b 0x6f27380)
0x47c03888 : 0x522e48 (0x0 0x0 0x47c038f8 0x1ef607)
0x47c03898 : 0x1ef607 (0x5a8cf820 0x200ba9 0x0 0x1)
0x47c038f8 : 0x1c0a02 (0x47c039d8 0x47c03954 0x16 0x62f0a2c)
0x47c03998 : 0x2fab82 (0x6e35c60 0x47c039d8 0x47c039e8 0x1bf216)
0x47c039b8 : 0x1e4362 (0x47c039d8 0x47c039c8 0x4d2200 0x63a3604) Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOSCSIBlockCommandsDevice(1.5.1)@0xc35000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
dependency: com.apple.iokit.IOStorageFamily(1.5.1)@0x515000
com.ATTO.driver.ATTOCelerityFC(2.4.1)@0xc7f000
dependency: com.apple.iokit.IOSCSIParallelFamily(1.4.3)@0xc78000
dependency: com.apple.iokit.IOPCIFamily(2.1)@0x5a1000
com.apple.iokit.IOSCSIParallelFamily(1.4.3)@0xc78000
dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
com.apple.iokit.IOSCSIArchitectureModelFamily(1.5.1)@0x5f5000
com.apple.iokit.IOStorageFamily(1.5.1)@0x515000
Kernel version:
Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
Common on both machines, both macchines have the ATTO Celerity PCI Express card for the fibre channel. So I went to ATTO's site looking for new drivers and found this
"ATTO's UL5D and Celerity PCI Express adapters will work in the MAC Pro, however; there is a temporary issue with the systems containing 2.5 GB or more RAM. Please limit the RAM to less than 2.5 GB until this can be resolved. Also, ATTO Configuration Tool version 3.6 will not function properly. Please watch our web site for solutions to both of these issues after 10/21/06."
So tomorrow I will bring both machines and hook back up to the terrablock and try it out with 2 gb ram rather than 4gb.
By looking at this panick log, am I right to assume because I see the ATTO in the log it could be the issue? Looking in google for anyone talking about this I found 1 where they said the temp issue as ATTO put it is a freeze/bomb issue. I will hopefully be able to check it out tomorrow, if I get out of training soon enough.
Any more input is always welcome.
Thanks

Usb midi driver for older Edirol sk-500 keyboard for use in Intel Mac Pro

I have just moved to an Intel Mac Pro from my old G4 Power Mac. I was using a Edirol (Roland ED) SK-500 usb midi controller in both Garageband and Logic. The old driver doesn't want to work in the new Intel machine. Checked Edirol's site and didn't find anything newer to use and nothing that addressed the Intel situation explicitly.
Does anyone have a newer compatible driver or some other solution for this issue?
Thanks,
Gord
Intel Mac Pro 2 x 2.66 Xeon, 2 gig ram, 1.2 terabyte storage Mac OS X (10.4.8)
intel mac pro 2 x 2.66 xeon, 2 gig ram, 1 terabyte storage Mac OS X (10.4.8)

SK-500 is a discontinued product and I do not think Edirol will ever release a Universal Binary driver. I'd suggest you sell it, and buy their PCR-M50/80 keyboard (these are awesome) or if you also want sounds, get the Roland Juno-G synth (128 voices polyphony, 1000+ sounds, full-blown synth and 5 effects processors). All these work as USB MIDI controllers with Universal Binary drivers.

Original iSight with intel Mac Pro

Similar Messages

Maybe you are looking for