Original MBP giving "not connected " message, connects after diagnostic

Forgive me for not being super savvy about the technical ins and outs of my original MBP...
I recently got a new wireless router (Belkin N) and that's when my issues began. Though the Airport signal is at 100%, safaru gives me the "not connected to the internet" message with the diagnostics button below. It was happening about every 15 minutes, so I called Belkin customer service and spent an hour on the phone, and the guy said the things we did (again, apologies for not remembering specifics...) should solve it. Though it did HELP (I can go up to about 2 hours without an issue now...), I still get the message.
I click the diagnostcs button, pick my signal, and either 1) it re-connects instantly ('you're connection appears to be working normally") or 2) makes me re-enter my password (and I always re-tick the 'remember in keychain' box) and THEN connects fine...
So ***? Can someone help me, with step by step instructions and layman's terms...?
THANK YOU ALL!!!!!
<Post Relocated and Edited by Host>

How do I do that? I don;t see anything on the router IP that seems like the obvious thing to do... (I's only moderatley tech savvy, P.S....)
THANKS!

Similar Messages

Internet not connecting after ios 7.0.2 update on iphone 5

Internet not connecting after ios 7.0.2 update on iphone 5

Hi there PompasJr,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
-Griff W.

MBP does not connect to a hotel WiFi

Hi All,
I'm here in Germany since 6 days. My MBP is not connecting to a free hotel WiFi. The Airport shows full bars but the webpage is not opening. Then, i tried to restart the machine but i didn't work out. The Network Diagnostics shows that every thing is GREEN but the internet and server, they are RED (failed). However, I can join the same network using my iphone and other Windows laptop.
Now, about the diagnostics,
-In the 1st step, I choose the Airport.
-In the 2nd, I selected the "PARKHOTEL". The network i'm trying to connect.
-The 3rd step is the question of having a DSL or cable modem and my answer is NO.
-The 4th step is there any device connected directly like switch or router and my answer is YES.
-The 5th step is to restart the router device and click CONTINUE when it is done restarting. Frankly, i can not restart the router bcoz I'm in a hotel and i'm connecting to the internet from my windows laptop and my iphone. So, i assumed that it has no issue. So, i clicked CONTINUE and the connection singe starts rotating.
-After a while, the 6th step is about any other device i can restart as a router or firewalls or managed switches connected directly to the device that just restarted and my answer is NO. Finally, the diagnostics said "Network diagnostics cannot fix the current networking problems".
(NO RESULT ACHIEVED)
Then, I googled a pit trying to find a solution and i found the same issue. The solution was to disable the firewall and i found it already disabled in my MBP.
(NO RESULT)
In the meantime, i deleted all other networks except for the network & the wifi connection I am trying to connect to.
System Preferences/Network/Advance/Airport
And i restarted my computer.
(NO RESULT)
Finally, i found something today.
The IP address of the Windows lap is 10.1.10.xx
But the IP address of the MBP is 10.0.11.xx
I changed the IP address of the MBP manually and i got the same issue.
Also, (NO RESULT)
Any ideas? Plz..

When this happens to me (top part green, bottom red), it's always dns... At check-in the hotel should have given you some info, including the IP address of the router, and the dns if it's different than the router. You know the first 3 parts -- 10.0.11 -- so you just need to figure out the fourth. Usually it's either 1 or 253, but if it's some random address then you are not going to guess it.

I have a MacBookPro 5.5 and an iPad 2 32GB 3G; both items are pretty recent. Today I tried connecting them via blootooth. MBP state "pairing success" whereas the iPad seems to be still searching and indicates the MBP as "not connected". That over and over

I have a MacBookPro 5.5 and an iPad 2 32GB 3G; both items are pretty recent.
Today I tried connecting them via blootooth. MBP states "pairing success" (only after NUMEROUS attempts!!!) whereas the iPad seems to be still searching and indicates the MBP as "not connected". That over and over.
Also, the iPad does not seem to recognize ANY bluetooth device in the house (they ARE discoverable since my MBP DOES "see" them) like, for instance, my mini-Mac.
Any help would be appreciated; (I hope the problem lies NOT in the bluetooth antenna, in other words not in hardware.)
P.S. The MBP seems fine since it DID connect to Mac-mini.

Hello:
Was the iPad paired with another device? If so, you need to "unpair" it from the previous device. Bluetooth devices may be connected with only one thing at a time.
Barry

HT1424 IPSec VPN connection brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help? thanks

IPSec VPN brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help?

Uggh, it's so frustrating! I've googled every search phrase I can think of and this seems to be the only thread describing this exact issue. I'm always automatically logged into Facebook on my MBP but just to be sure I logged out and back in and it worked fine.
I gotta say, I wasn't a fan of the Droid I had preceding this iPhone, and from what I hear the iPhone app for FB is a thousand times better - not that I'd know personally because I can't log in!! - but I could always access my FB account on the droid. Just sayin...

I PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

i PHONE 4S WIFI NOT CONNECTING AFTER UPGRADING TO iOS7.1.1

Sorry to hear that.
Do you have a technical support question? If so, please don't hesitate to ask. Also, please let us know the troubleshooting steps you've taken so far.

ISCSI initiator not connecting after upgradation

HI,
iSCSI initiator not connecting after upgradation from windows 2003 STD to windows 2008 STD R2 server, upgradation was successfully completed, except Microsoft iSCSI initiator connectivity, the initiaor interface show it as 'reconnecting'....!!!!!
Kindly guide on this.
Thanks in Advance

HI Shaon Shan,
Thanks for the info.
While searching for the file names start with iscsi in c:\windows\system32 folder the file version is 5.2.3790.3825 in working windows 2003 server.
Recently I've downloaded (Not yet installed) iSCSI initiator for Windows 2008 from Microsoft website in that iSCSI initiator file version shown as 6.3.4.1, instead of using inbuilt Microsoft iSCSI initiator in W2K8, shall I try installing the downloaded
version,
because when I checked in Windows 2008 (Upgraded version) the iSCSI file version remains the same as 5.2.3790.3825 which was found in windows 2003.
Post to our previous discussion
While I'm trying to install the new iSCSI initiator for Windows 2008 downloaded from Microsoft website, it shows some error "Setupcould not find the update.inf file needed to update your system" then I've updated my server, but no luck still showing the
same....!!!!

TS1538 Still not connecting after all these steps were done, what is the solution?

Still not connecting after all these steps were done, what is the solution?

Tried a different cable, this cable will now charge the ipod, but will not be recognized by the computer as even being a drive.
haven't tried a different computer because I really don't want itunes instaled on it.

IOS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this.

OS 6 Facetime not connecting after upgrade in UAE It was before on an Ipad purchased in Uk, I am miserable, I know its the carrier Etisalat, I sincerely some one finds a fix for this help.

I attempted to uninstall QT and reinstall- the QT 7.4 installer failed to install (it said a more up to date version was present, even though I'd trashed the old one). I downloaded and reinstalled 7.5 but itunes still did not work.
While my solution wasn't ideal
1) It was what Apple told me to do!
2) It seemed preferable to A) A complete system reinstall, B) removing 264 .plist files one at a time, rebooting, and seeing which one was causing the problem.
I still have the old .plist files in another folder, and can replace them in my preferences folder if I decide I need them. Most apps will create a new .plist file on start-up if there is not one present, so unless it is a program where I have gone to great lengths to change preferences from default, I'm guessing I will not notice much difference (and if I do, I can always go to my archive of .plists, or on Time Machine for that matter...)

MacBook Air Camera is not connected after mac OS update

MacBook Air Camera is not connected after mac update
I have a MacBook Air OS X version - 10.9.4 . I updated my mac 1 week before but todayI check that my mac in built camera is not working Even I try to check in this thing in all the apps. Please provide the way how to sort out this issue asap.

Use the suggestions here: http://support.apple.com/kb/HT2090
The SMC reset often fixes your problem.
Be sure you follow the instructions for your particular Mac model.
If your problem continues, restart Mac. Then download and install OS X Mavericks 10.9.4 Update (Combo).
If that does not correct the problem, reinstall Mac OS X.
If nothing else works, contact your Apple Service provider or Apple MacBook Support for help.

Firefox would not connect after upgrade. Did system restore (XP) and not firefox wont even start

Firefox would not connect after upgrade from verion 6 to version 7. Did system restore (XP) and now firefox wont even start

Sometimes Firefox will hang during startup or shutdown, and still be running invisibly in the background. Usually in that case, you need to "kill" it either by restarting Windows or using the Windows Task Manager. It sounds as though you are familiar with opening the Processes tab, finding firefox.exe, and using End Process.
If you use an advanced firewall or other security software that tracks which programs are permitted to use the internet, please see these articles:
* [[Fix problems connecting to websites after updating Firefox]]
* [[Configure firewalls so that Firefox can access the Internet]]
A couple of other suggestions:
(1) Can you start Firefox in its Safe Mode? Hold down the Shift key when starting Firefox. You should get a two-button dialog. Click "Start in Safe Mode" (''not'' Reset). Any difference?
(2) In case your regular software missed something that is interfering with Firefox, try the scanning and clean-up tools listed in this article: [[Troubleshoot Firefox issues caused by malware]]

Saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

saving after editing in elements 8 - this is painfully slow, including waiting through the "not responding" message, though after quick editing in organiser saving is very quick - what is the problem?

None of my pictures that I uploaded into iPhoto are in my Finder under Pictures. Should I copy and paste my folders from iPhoto into here, in case something happens to my iPhoto program (in addition to backing them up onto an external hard drive like I already do)?
No, that's just wasting space. A back up needs to be on a different disk.
Your photos are within the iPhoto Library.

After recent apple update MBP will not connect to wireless internet

After running recent Security and Airport upgrades my Mac Book Pro (Intel) will not connect to wireless home router supplied by Verizon (GTE) and several public wi-fi's. Cannot get IP but sees networks. My iMac PPC still works fine. Prior to upgrade everything worked fine at home and abroad to other public wi-fi's. MBP still connects at work with AppleBase wireless. Can the upgrade be removed? Is there a simple fix? Should I wait for apple to fix this and break something else.... If not broken don't fix it..

I'm having similar issues.
I have 2 MBP's. The newest one is about 1 month old and has never been able to connect to a WPA network. The older MBP is 20 months old and was originally installed with Tiger and gradually updated via Software Update and a retail copy of Leopard and subsequent Software Update updates to 10.5.2. Interestingly, this MBP was always able to access my WPA network until I decided to do an erase and install. I installed the retail copy of Leopard and was subsequently unable to access my WPA network. So, I went back to my Tiger install disks - but I'm guessing that whatever Leopard did *possibly* updated the firmware of the airport card as, even under Tiger, I could not access my WPA network (yes, I agree it seems unlikely that an OS update would/should update firmware but I am grasping at straws).
Trying to further understand the problem , I noted that the Network utility in System preferences would always show either a connection error or a connection timeout whenever I attempted to join my WPA network. I turned on syslog in my router and attempted to rejoin the network and saw the following errors:
<150>Apr 30 21:25:17 Vigor: WLAN_DBG - MLME Disassoc MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
<150>Apr 30 21:25:17 Vigor: WLAN_DBG - MLME Disassoc MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
<150>Apr 30 21:25:17 Vigor: WLAN_DBG - athgdeauthclient 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:17 Vigor: WLAN_DBG - Wpatimeouthandler
<150>Apr 30 21:25:14 Vigor: WLAN_DBG - WPA handshake timeout, disconnect 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:14 Vigor: WLAN_DBG - Wpatimeouthandler
<150>Apr 30 21:25:13 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
<150>Apr 30 21:25:13 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:13 Vigor: WLAN_DBG - Wpatimeouthandler
<150>Apr 30 21:25:12 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
<150>Apr 30 21:25:12 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:12 Vigor: WLAN_DBG - Wpatimeouthandler
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - send 3rd packet in 4-way handshake
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - Rx message 2 in 4-way handshake
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - parseEAPOLKey
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - EAPOL_KEY
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - WpaEAPoLhandler, from 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - EAPoL_handler, from 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - send 1st packet in 4-way handshake
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - RSN, Send key to: 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - WPA handshake start for 0:1e:c2:c0:9c:3b
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - WPA2 capable client
<150>Apr 30 21:25:11 Vigor: WLAN_DBG - MLME Associate MAC 0:1e:ffffffc2:ffffffc0:ffffff9c:3b
Strongly suggesting that the MBP is not completing the WPA handshake.
Any ideas as to where my investigations could progress? (The router manufacturer tells me that the WPA timeout handler is not configurable on the router).
TIA
Pat

Ipod not connecting after upgrade to itunes 8

After upgrading to itunes 8 my ipod (nano) will no longer connect to my computer and is not recognised by itunes. When I connect the ipod I get the windows 'install new hardware wizard' running but however I try to work through this I get nowhere. Looking at Device Manager in Windows says there are no drivers for the ipod - it has a little exclamation mark next to it.
My wifes brand new ipod will also not connect and its straight out of the box.
Not at all sure what to do next. The support pages don't seem to cover getting the install new hardware wizard. Any help or advice please!.

Ben888
Having reported this to my dealer, and them agreeing to supply a new lead to try, I had one final attempt at resetting the iPod.
Having restored, reset and updated the iPod half a dozen times before without success, a reset as described here:
http://www.apple.com/uk/support/ipod/five_rs/classic/
worked and it is now merrily playing again in the car with the original lead.
It would seem that Apple have developed another piece of spectacularly temperamental equipment........and people slate Microsoft!
Hope it works for you as well!
Message was edited by: petejigsaw
Message was edited by: petejigsaw

Airport Express (latest version) not connectable after waking Macbook

Hey Guys, my Airport Express (latest version) is not connectable via airplay, when I want to connect after I shut down my Mac for a while. Since now I always solved the problem with a reboot of the airport. Is there another opportunity to avoid this problem?

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

Original MBP giving "not connected " message, connects after diagnostic

Similar Messages

Maybe you are looking for