Original picture changed while saving the edited one

Hi,
I am an absolute beginner using Camera Raw.
I just edit a picture in Camera Raw 5.7. When I was finished I saved the edited picture using a new name. Unfortunatly the original picture has also changed. So now I have two identical edited pictures with different names but the original picture is gone. How can I keep the original?
Regards, Nicole

The original image is still there...it's just had processing parameters added to the raw file. If you really don't want them you can either go into Bridge, Edit, Develop Settings and hit clear. But if you do that you will loose all the work you put into making the adjustments...you might be better off going back into Camera Raw and create a snapshot of the settings them you can reset the image to it's default settings...

Similar Messages

  • When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

    When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

    Hi
    Try in iDVD
    • Save as a DiskImage
    • Play this by use of DVD-player tool
    Still OK or problems ?
    If OK - Burn it by use of
    • Apple Disk Util tool - or -
    • Roxio Toast™ (if You got this - I love it)
    Yours Bengt W

  • Problem While Saving the editable ALV GRID

    Dear Experts,
    I have a scenario in which i am display the ALV(using class) with some data in the custom container of module pool screen in the non-editable mode.Also i have save and edit buttons.If i click the edit button i have written the code to edit the some columns in the ALV grid, it is working fine.After editing it,when i click the save button then ALV has to refreshed with edited data and then it should go to non editable mode but it is not working.I have written the code for changing the editable ALv to non editable mode as follows :
      call method c_alvgd->set_ready_for_input
        exporting
          i_ready_for_input = 0.
    *****Row and column of the alv are refreshed after changing values
      stable-row = 'X'.
      stable-col = 'X'.
    *REfreshed ALV display with the changed values
    *This ALV is non editable and contains new values
      call method c_alvgd->refresh_table_display
        exporting
          is_stable = stable
        exceptions
          finished  = 1
          others    = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    Could you Suggest me solution for this issue ?
    Thanks & Regards,
    R.Dhineshraj.

    Dhinesh,
    I suppose that you are able to get your changes values on screen but not able to get your field in DISPLAY mode from editable mode, let me know if this is not your problem.
    When you press SAVE, after the PAI, again PBO will run and hence the editable code for that field will overwrite which will keep it editable.
    So, do something like this.
    data: gv_edit value 'X'.....  "global variable in TOP include
    PBO....
    loop at ...
    if gv_edit = 'X'.
    CALL METHOD lo_alv->set_ready_for_input
      EXPORTING
        i_ready_for_input = 1.
    else.
    CALL METHOD lo_alv->set_ready_for_input
      EXPORTING
        i_ready_for_input = 0.
    endif.
    endloop.
    PAI.
    when 'SAVE'.
    gv_edit =  space.
    When 'EDIT'.
    gv_edit = 'X'.
    Regards,
    Diwakar

  • Process order date changes automatically while saving the order

    Hi All,
    While creating a process order in COR1, system proposes the scheduled start date and finish date as current date (today's date), but while saving the order, the dates automatically changes to previous day's date (one day before). Can any one help in what config change needs to stop this auatomatic date change..?  Thanks in advance.
    Regards,
    DS.

    Dear,
    I would suggest you to carrout Master reciepe scheduling and update the Inhouse production time to the material master, this would enable the basic start dates and sheduled start dates to be same.
    If you dont want to carrout scheduling of order, then in OPUZ transaction for the plant/order type combination deactivate the check box for automatic scheduling.
    Regards,
    Prasobh

  • To set an error while saving the order when the item categor changed in CRM

    Hello SAP Gurus,
    As per our current system set up, whenever the order created in CRM once replicated to ERP should not change the item category in CRM .If the item category is changed( allows the system) and saved, it gives an error as u201CItem category should not be changedu201D. We have been encountering  this type of issue since long back
    To avoid this type of issue, an error should through while saving the order when the user changes the item category in CRM.
    Can someone help me to achieve this.
    Thanks in advance.
    Cheers
    Sreedhar

    Sreedhar,
    Can't you control it by Item Category determination?
    JD

  • Wanted to change the Exchange rate while saving the PO

    Hi,
    I have a requirement that i have to change the value of Exchange rate while saving the PO.
    Even i checked with more BADI's. but i am not able to update the new value.
    Can you tell me any specific user exits available for this.
    Thanks in Advance,
    Best Regards,
    Prabu

    Solved

  • Changes in the material, the order should be blocked while saving the order

    Hi,
    A sales order is already there and delivery is not yet done. The requirement is, If I make any changes in the material, the order should be blocked while saving the order.
    Is there any indicators or some fields which tells material is changed in the order. How this can be realised.
    I thought of table CDPOS, but this can be used only after Order is saved.
    Please provide your inputs.

    Use user-exit MV45AFZZ, form-routine USEREXIT_SAVE_DOCUMENT_PREPARE.  Compare the values in XVBAP-MATNR(New Values) and YVBAP-MATNR(Old values).  If the values are different, update the value VBAK-LIFSK to block the order.

  • How can I change the time shown that the picture was taken on the edit panel - it is an hour slow

    How can I change the time shown that the picture was taken on the edit panel - it is an hour slow

    Thanks!  I can't believe I missed that!

  • PSE7 is not saving the edits I make to my pictures

    I'm working in the Editor and I am saving the edits I make as a jpeg file.  I then go back to Organizer and my edits were not saved.
    Any ideas why this might be happening?

    Usually, File->Catalog->Repair and Optimize will fix the problem for future edits

  • Dump while saving the project

    Hi all,
    System is giving dump while saving the changes in the project.
    Short text
         The current application triggered a termination with a short dump.
    What happened?
         The current application program detected a situation which really
         should not occur. Therefore, a termination with a short dump was
         triggered on purpose by the key word MESSAGE (type X).
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         Short text of error message:
         Profitability segment number 0026636665 does not exist in operating conc
         ern XXXX!
         Long text of error message:
          Diagnosis
              The system discovered a serious inconsistency in the data basis of
              Profitability Analysis (CO-PA) This message should never occur in
              the course of normal operations.
              The system tried to find characteristics from the segment table
              CE4XXXX using the segment number 0026636665 in operating concern
               This profitability segment number does not exist.
              This can occur if you have deleted data from table CE4XXXX and have
              already assigned data to profitability segments in this operating
              concern.
              Another cause may be that you have changed the assignment of your
              controlling area to an operating concern. When this happens, the
              system tries to interpret the segment numbers in the new operating
              concern.
          System Response
              Do not continue processing.
          Procedure
              The data in the segment table needs to be reconstructed. It may be
              possible to re-enter the assignments to profitability segments.
              Look in OSS for notes regarding error message KE499. You may find
              information there that could help you solve the error.
              Otherwise contact your CO-PA consultant or create a problem
              message.
         Technical information about the message:
         Message class....... "KE"
         Number.............. 499
         Variable 1.......... 0026636665
         Variable 2.......... "XXXX"
         Variable 3.......... " "
         Variable 4.......... " "
    Process -
    From WBS element user fields, charactertics value are assigned to profitability segment through derivation rule
    WBS element values settles to Profitability segmnet.
    WBS element has system staus REL  ACPT RESA SETC
    System is giving dump while saving any changes in the project. can anybody tell what is root cause and solution for this issue?
    Thanks,
    Sudhir

    Request you to refer this note 199959.  Take help of you CO cosultant.
    Edited : Request you to check with your CO consultant as PSG has been deleted, take help fo ABAP as well. ( May be above note may not help you much,  WIth help of ABAP and CO define problem and than seach with your message KE499 in Service market place )  That would be better  approach.
    With Regards
    Nitin P.
    Edited by: Nitin  Patoliya on Mar 10, 2010 5:02 PM

  • While saving the delivery no in VA02 dump error showing (Arithmatic overflo

    Hi,
    while saving the delivery no in VA02, one dump error getting displayed.
    Arithmatic over flow occurs.
    Can any one can say how to rectify the program to avoid dump error
    The below lines are showing in dump.
    Waiting for quick response.
    Error analysis                                                                 
                   An exception occurred that is explained in detail below.                                                       
                   The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not                                                       
                    caught in                                                       
                   procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", nor was it propagated by a                                                       
                    RAISING clause.                                                       
                   Since the caller of the procedure could not have anticipated that the                                                       
                   exception would occur, the current program is terminated.                                                       
                   The reason for the exception is:                                                       
                   An overflow was discovered in an ongoing arithmetical operation with                                                       
                   operands of type P. Possible causes are:                                                       
                   1. The result field of type P is too small for the result.                                                       
                   2. The result or a intermediate result has more than 31 decimal places.                                                       
         How to correct the error                                                                 
                   The result field must be enlarged, if this is still possible. It may                                                       
                   also be possible to break up the current process into subprocesses so                                                       
                   that only smaller values occur.                                                       
                   There may already be a solution to the error in the SAP notes system.                                                       
                   If you have access to the SAP notes system first try searching with the                                                       
                   following keywords:                                                       
                    "COMPUTE_BCD_OVERFLOW"                                                       
                    "BCD_FIELD_OVERFLOW" (Until release 4.0a, this runtime error occurred at this                                                       
                    position)                                                       
                    "SAPMV50A" or "ZSDI_MV50AFZ1_CRPC_CALC_4QA"                                                       
                    "USEREXIT_SAVE_DOCUMENT_PREPARE"               ***----
         Information on where terminated                                                                 
                   Termination occurred in the ABAP program "SAPMV50A" - in                                                       
                    "USEREXIT_SAVE_DOCUMENT_PREPARE".                                                       
                   The main program was "SAPMV50A ".                                                       
                   In the source code you have the termination point in line 666                                                       
                   of the (Include) program "ZSDI_MV50AFZ1_CRPC_CALC_4QA".                                                       
                   The termination is caused because exception "CX_SY_ARITHMETIC_OVERFLOW"                                                       
                    occurred in                                                       
                   procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", but it was neither handled                                                       
                    locally nor declared                                                       
                   in the RAISING clause of its signature.                                                       
                   The procedure is in program "SAPMV50A "; its source code begins in line                                                       
                   208 of the (Include program "MV50AFZ1 ".
    657                           ADD: xvbap-brgew TO l_w_tot_list_vals-brgew,                                                  
         658                                xvbap-zzlogpoint TO l_w_tot_list_vals-zlogpoint,                                                  
         659                               xvbap-zztotgrossvalue TO                                                  
         660                               l_w_tot_list_vals-totgrossvalue.                                                  
         661                                                                 
         662                                                                 
         663                           l_w_tot_list_vals-gewei = xvbap-gewei.                                                  
         664                                                                 
         665                           IF NOT xvbap-pstyv IN zzt_free.                                                  
         >>>>>                             ADD xvbap-volum TO l_w_tot_list_vals-volum.                                                  
         667                           ELSE.                                                  
         668                             ADD xvbap-volum TO l_w_tot_list_vals-volum_f.                                                  
         669                           ENDIF.                                                  
         670                           ADD 1 TO l_w_tot_list_vals-zw_nbitem.
    Best Regards,
    BDP
    Edited by: Bansidhar Padhy on Jan 26, 2010 8:24 AM

    ADD xvbap-volum TO l_w_tot_list_vals-volum.
    Declare l_w_tot_list_vals-volum as  "like vbap-volum" or (preferably) "type volum_ap".
    If you're using a packed decimal, you've done something like....  volum(5) type p decimals 2, which is a great way to get an overflow...if you use packed decimals in a program...declare <field> type p decimals <n> without a length attribute, so that SAP can use the full 8 bytes for the calculation.....the put it into a alpha field for display, if needed....

  • Sales order Price change while releasing the credit block using VKM3

    Hi,
    Please advice me on the following issue I am facing:
    I am creating a sales order, which is having automatic pricing. The price is getting picked up using the condition records correctly in the order. The pricing condition can be manually changed in the order (setting according to the condition type).
    So I am changing the price manually in the sales order (system determined price $230 and I changed it to $270) and saved the order. Cross checked the order while saving to make sure the price of the order is now $270.
    As the customer credit limit is exhausted, the system blocked the sales order (credit block). I released the sales order using VKM3, but when I checked the sales order, the system reset the price back to $230 (condition record value).
    Is this a standard SAP behavior?
    My requirement is: the system should not change the value back to the original condition value while releasing the sales order using VKM3.
    Please guide..
    Regards,
    Prasanth

    In the condition type definition T Code V/06, fin your manual condition type definition- for the field "Manual Entries" - Have option C "Manual entry has priority".
    In the pricing procedure, T Code V/08 in the initial screen - for your pricing procedure - under the column "pricing Type" have Option C - copy manual pricing elements and redetermine others.
    Try with these settings. Hope this helps
    Regards
    Sai

  • Communication exception occured while saving the thresholds data to the emd

    Hi All,
    I have a 2 node installation of R12 running on HP-UX whereby one node is the application tier and the second node is the database tier....
    I have configured Enterprise Manager Database console on the db tier.
    Am trying to edit the metrics but i keep getting the error below.I have enough disk space and my permissions are setup correctly but am still getting the same error.
    I have tried editing on different browsers but still i have failed.Could anyone please help me out.]
    Error occurred while editing the metric thresholds.
    Communication exception occured while saving the thresholds data to the emd.

    2008-10-20 17:43:35,075 [SeverityLoad http://erpdb.zantel.com:3938/emd/main] WARN jdbc.ConnectionCache _getConnection.303 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
    2008-10-20 17:43:35,075 [SeverityLoad http://erpdb.zantel.com:3938/emd/main] WARN jdbc.ConnectionCache _getConnection.306 - Io exception: Got minus one from a read call
    java.sql.SQLException: Io exception: Got minus one from a read call
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:145)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:254)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:386)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:518)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:164)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:34)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:767)
         at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:324)
         at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:114)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:694)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:540)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:346)
         at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:324)
         at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:296)
         at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:423)
         at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:156)
         at oracle.sysman.emSDK.svc.conn.ConnectionService.getPrivateConnectionNoWait(ConnectionService.java:659)
         at oracle.sysman.emdrep.receiver.FxferRecv.markFileAsError(FxferRecv.java:1083)
         at oracle.sysman.emdrep.receiver.FxferRecv.loadSeverities(FxferRecv.java:1216)
         at oracle.sysman.emdrep.receiver.FxferRecv.receiveFile(FxferRecv.java:1509)
         at oracle.sysman.emdrep.receiver.FxferRecv.doPost(FxferRecv.java:820)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:282)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    2008-10-20 17:43:35,192 [HttpRequestHandler-9114403] ERROR eml.FxferRecv doPost.828 - Upload repsonse header :-ERROR-400|Io exception: Got minus one from a read call-

  • Address details while saving the order

    hello experts
    i am having the requirement where i wanted to fetch the Ship-to Address details that is changed by the user while saving the order.
    I tried using different FMs like BAPI_BUPA_ADDRESS_GETDETAIL but these fetch the address from master data. What i want is the new address entered by the user.
    In CRM_ORDER_READ i am getting a new ADRNR for the newly entered address (itab_partner-addr_nr)but not able to find any FM to get the details out of it.
    did anyone know how to get the same?
    Thanks in advance.
    regards
    rajeev

    Hi,
    I tried FM BUA_BUPA_ADRC_GET. This one returns address details from memory but doesn't have partner relation in it.
    basically it populates partner's name into NAME1 field of ADRC.
    regards
    rajeev

  • Error while Saving the report

    Hi,
    i have created some reports which are working fine,
    but now i am facing some errors while saving the files.
    Also the reports does show only one record while there are many records in the database.
    The error messages are as follows:
    REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
    REP-1070: Error while opening or saving a document.
    Please help me to find out the exact problem.
    Also tell me how can i show all the pages of Database records in a report( while one record on each page)

    As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
    Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
    Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
    As you'll discover, Reports is not the most robust application ever written.

Maybe you are looking for