Original SIPURA SPA-3000 Help

Five years ago I purchased, directly from SIPURA, a new SPA-3000. I have never used it but now I want to set it up but I want to make sure that it has the latest firmware. I looked at the Linksys site (since any attempt to access www.sipura.com gets redirected to Linksys) and found the firmware for the SPA-3000. Can someone tell me if this is the same unit as mine or has it been modified from the original and the firmware will not work on mine?
 I tried to contact Linksys technical support but their automated system tells me I must contact the reseller, which ironically is Linksys, since they purchased Sipura. When I do get to a real person they just keep repeating that I must contact the original reseller, they don't want to listen to me telling them that they are now the reseller.
Can anyone help and tell me what the most current firmware is for this unit and where I can download it? The GUI setup shows the following information:
Software Version: 2.0.13 (GWg)
Hardware Version: 2.0.1 (7067)
Thanks
Solved!
Go to Solution.

Hello bsdaiwa, yes it is the same unit. SPA-3000 was never actualy produced by Linksys, they produced later SPA-3102 units. Anyway, regardless of the unit producer (SPA or Linksys) they are capable to use the same firmware.
I myself have 2 pieces of SPA-1001 units, one in the "old" Sipura box, one in the "new" Linksys box, each of them having different HW revision and both hapily run the identical firmware 3.1.19(SE) from Linksys pages.
Also, the SPA-xxxx units are protected against flash of incompatible firmware (for example from another unit model), the unit loads the firmware first to RAM, then checks the FW "signature", and only if it's the matching FW "signature" then unit will flash it to it's flash rom and reboot.

Similar Messages

  • Sipura SPA-3000 incoming calls problem

    I have a very strange problem with my SPA-3000.
    I can make any outgoing calls.
    For the incoming calls:
    1. I hear the ring
    2. Callers do not hear anything (no ringing tones)
    3. I pick up the phone and hear nothing
    4. Callers still hear nothing and call does not connect
    5. I hangup
    6. Caller disconnect
    What could cause such problems?
    I forwarded ports 5060-5061 and 16384-16482 to the adapter.
    P.S. I'm using pennytel services.
    Thanks.

    Matex2 wrote:I already had a STUN server and NAT defined.
    I'm really stuck with any other suggestions.
    I would run a quick test to see if it involves the determination of your external ip address. Determine your external ip address (run www.whatsmyipaddress.com on a pc attached to the router) and put the ip address on the Sip tab under Ext IP. This is not a permanent solution unless you have a static ip address, but if this solves the problem you know that has something to do with your router. Remove the entry after you run the test.
    The basic diagnostic tool available is a sip debug trace. To do this you need a syslog program running on your pc. See this web page for a link to download a syslog program:
    http://www.sipura.net/Documents/faq/Section_2.html#9
    You setup your pc address under debug server on the SPA3000 system tab, you set the Debug Level to 3 and on the Line tab you set the Debug Option to FULL.
    A sip debug trace will show the incoming sip invite, the responses and the startup of the rtp packets.
    Message Edited by hw on 08-06-2008 06:30 PM

  • SPA 3000 Phone Adaptor

    Hi everyone,  the issues an am having with the SPA 300, Spa 300 give fault answer to Asterisk  server. When Asterisk is passing call to SPA 3000.
    SPA3000 answer it right away and a2billing start bill my call immediately. Dose anyone know to to set Spa 3000 to wait until the other party pick up, answer the call and then start bill for it. thanks.

    Got a bunch of these in 2007... was hoping they wouldn't be bricked already. Nice device most of the time. If I were in product management and found out that one of the former flagship products has a silly little software bug that actually breaks on of the buttons on the attached phone, I'd see if there wasn't something that could be done about it. You know, it may affect how confident a potential customer would be investing in another product from that supplier...
    Anyway, anyone know of an analog telephone to SIP adapter with POTS fall-back out there that supports all buttons on the attached phone? No router needed, just an ATA. But all of 0-9, * and # has to work whether operating in SIP or POTS mode.
    For now I am indeed using 3.1.18 on the SPA-3000 boxes as a stop-gap, but 3.1.18 cannot send a proper # "tone" in a SIP invite (as %23). 3.1.20 can do that at the expense of not being able to send a # code as DTMF.

  • HT204053 I cannot update my apps on my iPhone. I have 2 email addresses and I now realize I changed my Apple ID from one email to the other. Now I cannot update on my iPhone because it is associated with the original email address. Help?

    I cannot update my apps on my iPhone 3. I think it's because I've discovered I have 2 Apple ID's, the original one for iTunes from 2009, and another one I used more recently. I think I must have changed my Apple ID to the more recent email, but my iPhone does not accept any password for the new ID. I have tried changing back but cannot. I have reset passowrds on both ID's 6 or 7 times, but that does not work either. I read I cannot undo an Apple ID, so I have 2, but they are mixed up. Help?

    Did you purchase or download the apps with your old ID?  Apps are tied to the ID that is was purchased from.
    If it is a new app you bought with your new ID, you can go into settings - appstore- apple id and then log out.

  • Cannot Locate the Original File ? ?- Help Please

    Hi ,
    I have Consolidated my Library to New folder on my External Hard-Drive. so i Know that all my music is in One palce..
    I have a Problem, If i try and play a Track, It Now get a message saying Cannot Locate the Original File..& has this ! against the track..???
    What has gone wrong ?
    Many thanks

    Unfortunately I'm in the same boat. Somehow I cannot locate over 30 GB of music that just disappeared?!
    Moved the iTunes folder from my Music folder from the HD to my 250 GB external drive. I did not rename it. Kept it the same name. Went into the Advanced folder in iTunes Preferences and chose to use the external drive as my source for music. However, I noted that an iTunes folder always reappeared in my Music folder on the HD. Didn't realize that I had to Consolidate libraries until later on, but did so the next day as I attempted to figured out why it wasn't working ("cannot locate original file"). When I open iTunes, all of my songs and playlists are listed (I assume this is cache), but none will play except for a few random artists (most have "!"). When I go back and look at the actual iTunes Music folder, it has only these random artists listed (I assume these are the (only?) original files?).
    Not sure where everything else went when I haven't deleted any iTunes files? I've read quite a few threads with this same problem without any real answers. When I use Spotlight to locate the original songs, I get zero found.
    Is there any easy answer as to where my songs went or am I looking at taking this Mac in for some file retrieval.
    Many thanks to anyone that can help.

  • HT201441 i buy to second-hand iphone 5 and i resat so i want to original owner number plz help me urgent

    i want to original owner tel: number plz help me becouse my iphone is lock

    Welcome to the user to User Technical Support Forum provided by Apple.
    Syazuan wrote:
    i want to original owner tel: number ...
    No one here can assist you with that.
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • Cannot restore original iPhone to original firmware, can someone help?

    Alright, I have tried literally everything virtually possible to fix my iPhone.  Currently it is in this state:
    And I want to fix it up and make it back to the original iPhone firmware.  It currently has no firmware installed.  It cannot install any firmware and if I try it will just fail.  Please help.

    **SOLVED***
    After wasting 6hrs and trying everything under the sun, Redsnow, TinyUmbrella, Snowblizzard, Ziphone, ect, ect..
    I was able to resolve this by simply switching usb ports..  I was dong this on an Acer netbook and just went from the 2 usb portside to the main one near the power source..  RESTORED via Itunes and I am back to a working phone...
    Not sure what caused the issue tho, as I was on a (presumebly) bone stock Iphone and simply tried to update the software from the phone...
    oNe

  • ITUNE Original Files, I need help !!

    I can no longer view the purchases I made from itunes or listen to music I've previously downloaded, it keeps giving a message of " Original File Not Found" all help appreciated.
    MACBOOK PRO   Mac OS X (10.4.9)  

    iTunes will not be able to find the original file if it has been either deleted, moved to a different location or renamed outside of iTunes. Are any of these possible?
    Other than that, I would point out that you've posted on the iTunes for Windows side of these boards and although for the most part we're a pretty nice bunch of people here - if I do say so myself - generally speaking you'll be better off if you post your question over on the iTunes for Mac side.
    Good Luck!

  • My computer has reverted back to its original state!! Help!!!

    I was using my computer and went to log into ichat, it acted like I had never logged into the program before, asking me to enter my screen name and password. I then went to go into mail and it did the same thing asking for my email address and outgoing mail servers. I decided to shut down my computer and when I logged back on, the my background image disapeared and the dock had reverted back to its original state. All my other programs do not recognize my previous preferences and my keychain is nowhere to be found in my applications menu. My documents and saved pictures, along with my itunes music is still intact, but the rest of my computer is reverted.
    Is there any way to fix this and get my computer back to my personal settings? How do I get my keychain back?
    I really need help!!

    Hello linty242,
    First of all, Welcome to Apple Discussions Forums!
    Did you happen to rename your Home Folder? If so have alook at Dr. Smoke's (of the X-Lab) FAQ found at:
    http://www.thexlab.com/faqs/renamehomerecovery.html
    Read and fully understand the advice found there before proceeding.
    If this is not the problem post back here,
    littleshoulders [:-)

  • Upgraded the firmaware for SPA-3000 and lost the dial tone

    Please help me figure out the problem with my Sipura box which has lost the dial tone after I upgraded the firmware.  All the configuration looks fine.  it is registering fine too but no dial tone. 

    Reset the device to factory default. This is usually needed after upgrading the firmware.

  • HT4061 I have an Iphone 4, which I tried to download the new IOS 7 update on, but it says, on screen, connect to Itunes! I have tried but it says i need the original cd?? Help???

    Hi can anyone help? I have an Iphone 4 which I tried to download ios7 to, but it says on screen, connect to itunes, which I have tried, but it says I need the original cd? I dont recall receiving one, so does this mean the phone has to be reset, if so how?
    Thanks in advance, Tracy.

    Do you have the latest version of iTunes installed on your computer as you will need it? It can be downloaded from the Apple site via the iTunes menu at the top of the screen.
    It sounds like your phone is in Recovery Mode, more on this here: http://support.apple.com/kb/HT1808
    Regards,
    Steve

  • In FF5, my 2 Gmail accounts log off randomly, then both tabs show same gmail 'name' asking to log back in, instead of 1 gmail name in 1 tab & the other gmail name in 2nd tab, as were originally logged in! Help, please..

    New Acer desktop, loaded FF5 yesterday. I keep personal & professional Gmail both open at same time (worked fine in earlier FF versions). Today, both Gmails log themselves off at random & ask for log-in. But then both tabs either show personal Gmail name or show profl Gmail name ! Also signs me out of Google Reader & Calendar (both logged in w/ personal Gmail account), then gives prof Gmail name to sign back in (which won't work, of course). HELP!

    instead of adding more to the already long post, I add via replying to myself:
    writing about the issue made some things more clear, so I looked and found this:
    http://lists.debian.org/debian-user/201 … 00474.html
    which looks like my issue.
    I went and tried - and a variation of it works.
    1.) I log out
    2.) GDM gets restarted - inittab method
    it gets restarted at VT8 - it was at VT7
    3.) I go to another VT - like VT1 - and log in as root
    4.) I find the pid of consolekit with:
    ps aux | grep console
    and kill it
    kill -9 <PID>
    5.) I restart GDM - which will be at VT7 now, as it should
    and then go back to VT1, because I'll be at the GDM-login screen at VT7 now...
    6.) I find and kill consolekit _again_
    7.) I can now switch to VT7 with GDM running and log in as it should be
    console-kit-daemon will be started _again_ automatically
    It seems it gets re-started at the wrong place - or with the wrong options
    I always see it running like:
    root 6439 0.0 0.3 17432 2768 ? Sl 17:18 0:00 /usr/sbin/console-kit-daemon --no-daemon
    Maybe it is the "--no-daemon" option? Or that it should not be started by GDM but only afterwards, by the Gnome-session?
    ...or something else...
    It is not a solution really, since all this takes as much time as restarting the whole system, but without all the typing and killing and switching back and forth to consoles...but it works.
    What is happening here? Is this normal? Where could my misconfiguration be?
    Cheers
    Last edited by jomen (2010-09-27 15:48:11)

  • Looking for Best Hardware solution for PSTN to PBX spa 3000 series, a plug in pc card or ?

    Hi All,
    I'm looking at the SPA3120 voip router as a possible device to connect a single analog phone line to a linux based PBX- perhaps asterisk or freeswitch. 
    Any voice mail and call routing (inter office or office to/from pstn)  should be handled via the pbx.
    VOIP is another matter,  office phones (4) are planned to be ip based and will connect via common ethernet line.
    Right now just need a low cost analog to pbx device.  is the spa3120 the device to use or should I look at perhaps a x100p pci card installed in the server?    with the spa device I don't have as much to worry about regarding pbx & linux hardware issues.
    New to all this so feeling a bit lost...

    Hi.
    These products are being handled by the Cisco Small Business Support Community.
    *If my post answers your question, please mark it as "Accepted Solution".
    Thanks!

  • WIN 7 Home Prem 64-bit has crashed & burned. Need copy of original install disc. HELP!

    I have a "Windows Error Recovery: Windows failed to start." error. And,the F8 page is asking for the "installation disc” to "repair your computer".  How can I get a copy of the original Home Prem 64-bit to re-boot or restart my Satellite P770?
    Thanks, jb

    Satellite P770 (PSBY3U-04201N)
    As you say, it's essentially the same as this one.
    Satellite P770-BT4G22 (PSBY3U-02W01N), so the downloads here will work.
    i guess this notebook is/was not a popular one since its not in this Toshiba support website
    This situation is not uncommon. It's either a special order or from a big-box store.
    Try a Startup Repair and a System Restore from the Windows Recovery Environment.
       What are the system recovery options in Windows 7?
    Let us know how it goes.
    -Jerry

  • Deleted files from the Original and Data folders - help?

    Hello,
    I imported my fiance's iphoto library to try to recover photos that I lost from when my hard drive crashed. They first were not importing into iphoto (while the files were on the harddrive), so I placed them in my Originals/Data iphoto folders. Now I have 6-8 versions of files that I don't even necessarily need, mostly thumbnails and a few of the original files.
    I know I have made a lot of mistakes... so at this point what do I do- I've stopped manually deleting folders from these categories, but I do not want to lose what precious pictures I had from before the harddrive failure, and how do I get back to a iphoto library without duplicates?
    Please advise!!! Thank you!

    My library still opens within iPhoto- will it continue to do so? Do I need to do anything now (since I have already messed with the Originals and Data folders?)
    In addition, iPhoto now shows me blanks for some pictures/events, is there a way to have iPhoto scan the entire computer and realize files are missing and to ignore them?
    Therefore it is not a fully functioning iPhoto library - it is corrupted
    3 - if you do not have a fully functioning iPhoto library then quit iPhoto and drag the iPhoto library to the desktop, launch iPhoto and create a new library and then open the bad iPhoto library on the desktop and open the originals folder and drag each folder from it onto the iPhoto icon in the dock (or the iPhoto event window) to create events with all of your photos, then back up and run duplicate annihilator
    Since you have corrupted your library you can do anything you want to it before you create a new one from the remaining photos
    LN

Maybe you are looking for