Original System for transformations and DataSources

Dear All,
I have imported all DataSources and transformations from DEV box into QAS box. Transports ended without errors and they are working fine.
I have the following questions, when check the Object Directory Entry (RSA1->Extras-> Object directory entry) for transformations and DataSources the Original System is QAS.
Should not the original system be DEV?
Transformations technical names in QAS are not the same as in DEV. Should not they have identical technical names?
Details:
BI70 SAP NetWeaver 2004s
Support Packge 10
Thanks,
Carlos Weffer

Transfornations' technical names change is normal.
Also, when you see the object directory, the sysytem will eb Qa only as you would have converted the source system while transporting.
Ravi Thothadri

Similar Messages

Mass change original system for objects

Is there a way to change the original systems for multiple objects at once?
So instead of changing them one by one, can the original system for objects be changed for multiple objects at once?
Kind regards,
Ben

I've checked with the Basis team, but they couldn't help me further.
For the moment we'll leave the objects like they are and Overwrite the originals when transporting.
Kind regards and thanks,
Ben

Certified operating systems for 32bit and 64 bit with bussines intelligence

Hi,
Pls can you tell me where I can find the list of certified operating systems for 32bit and 64 bit with bussines intelligence standart edition1.
thank you in advance,
Denis

Check the documentation:
http://www.oracle.com/technetwork/middleware/real-time-decisions/downloads/bi-se1-089899.html
regards
John
http://www.obiee101.blogspot.com/

HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Errors related to downgrading iOS

How to change the source system for just a datasource

Hi,
Our test/development BI system ( BI 7.0 Unicode ) is connected to our development system and to our test system, 1 BI system connected to 2 R/3 systems.
During some time, the test system won't be available so all datasources that point to the test system must be connected to the development system. In RSA1 is not possible to change the source system in a datasource: RSDS 057
'Creation of DataSources for SAP source system D30CLNT007 is not permitted' , same error trying to copy the datasource,.
Any idea about how to proceed ?
Regards,
Joan

Hi,
If I try to repliclate metadata in the datasource, message RSAR 051 appears: 'error when opening an RFC connection'. This error is expected because the logical system pointed in the datasource does not exist.
Is not possible to change the source system in datasource ( in RSA1 ) because the field is always greyed, also if I try to copy the datasource the message RSDS 057 appears.
Any idea about how to proceed ?
Regards,
Joan

Logical systems for modeldata and RFC metadata

Hi All,
I want to know how I can display the my own created logical system names under the drop-down menu when i have to select the logical system names for modeldata and rfc metadata. I don't want to them to be written instead i want them to be one of the options in the drop down menu, as we have them in the FLIGHT_LIST_INIT example found in the sample applications and examples.
Thanks in advance
Srikant

Hi,
While creating SLD for your R/3 systems give the desired name of wht u want instead of logical name.
For configuring the same refer the link below :-
http://help.sap.com/saphelp_erp2004/helpdata/en/29/e0b75c2b7d40c5bfbda82e905b701c/frameset.htm
Regards,
guru

Individual business system for ABAP and Java Stack

Hi All,
I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
Thanks + Best Regards
Jerome

Are you sending same message type from ABAP proxy and Java Proxy to XI?
If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
--Archana

Confusion with OCFS2 File system for OCR and Voting disk RHEL 5, Oracle11g,

Dear all,
I am in the process of installing Oracle 11g 3 Node RAC database
The environment on which i have to do this implementation is as follows:
Oracle 11g.
Red Hat Linux 5 x86
Oracle Clusterware
ASM
EMC Storage
250 Gb of Storage drive.
SAN
As of now i am in the process of installing Oracle Clusterware on the 3 nodes.
I have performed these tasks for the cluster installs.
1. Configure Kernel Parameters
2. Configure User Limits
3. Modify the /etc/pam.d/login file
4. Configure Operating System Users and Groups for Oracle Clusterware
5. Configure Oracle Clusterware Owner Environment
6. Install CVUQDISK rpm package
7. Configure the Hosts file
8. Verify the Network Setup
9. Configure the SSH on all Cluster Nodes (User Equivalence)
9. Enable the SSH on all Cluster Nodes (User Equivalence)
10. Install Oracle Cluster File System (OCFS2)
11.Verify the Installation of Oracle Cluster File System (OCFS2)
12. Configure the OCFS2 (/etc/ocfs2/cluster.conf)
13. Configure the O2CB Cluster Stack for OCFS2
BUT, here after i am a little bit confused on how to proceed further. The next step is to Format the disk and mount the OCFS2, Create Software Directories... so and so forth.
I asked my system admin to provide me two partitions so that i could format them with OCFS2 file system.
He wrote back to me saying.
*"Is what you want before I do it??*
*/dev/emcpowera1 is 3GB and formatted OCFS2.*
*/dev/emcpowera2 is 3GB and formatted OCFS2.*
*Are those big enough for you? If not, I can re-size and re-format them*
*before I mount them on the servers.*
*the SAN is shared storage. /dev/emcpowera is one of three LUNs on*
*the shared storage, and it's 214GB. Right now there are only two*
*partitions on it- the ones I listed below. I can repartition the LUN any*
*way you want it.*
*Where do you want these mounted at:*
*/dev/emcpowera1*
*/dev/emcpowera2*
*I was thinking if this mounting techique would work like so:*
*emcpowera1: /u01/shared_config/OCR_config*
*emcpowera2: /u01/shared_config/voting_disk*
*Let me know how you'd like them mounted."*
Please recommend me what i should convey to him so that i can ask him to the exact same thing.
My second question is, as we are using ASM, for which i am gonna configure ASM after clusterware installation, should i install Openfiler??
Pls refer the enviroment information i provided above and make recommendations.
As of now i am using Jeffery Hunters guide to install the entire setup. You think the entire install guide goes well with my enviroment??
http://www.oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html?rssid=rss_otn_articles
Kind regards
MK

Thanks for ur reply Mufalani,
You have managed to solve half part of my query. But still i am stuck with what kind of mount point i should ask the system admin to create for OCR and Voting disk. Should i go with the mount point he is mentioning??
Let me put forth few more questions here.
1. Is 280 MB ok for OCR and voting disks respectively??
2. Should i ask the system admin to create 4 voting disk mount points and two for ocr??
3. As mentioned by the system admin.
*/u01/shared_config/OCR_config*
*/u01/shared_config/voting_disk*
Is this ok for creating the ocr and voting disks?
4. Can i use OCFS2 file system for formating the disk instead of using them as RAW device!!?
5. As u mentioned that Openfiler is not needed for Configuring ASM... Could you provide me the links which will guide me to create partition disks, voting disks and ocr disks!! I could not locate them on the doc or else were. I did find a couple of them, but was unable to identify a suitable one for my envoirement.
Regards
MK

HT5622 After both (1) changing the password for my Iphone 4S and now (2) loading latest system for it (and restoring when Itunes said I must) it will no longer restore all the apps I bought with the old password. How to get them please?

After both (1) changing the password for my Iphone 4S and now (2) loading system 6.1.3 for it (and restoring when Itunes said I must)
- Itunes it will no longer restore all the apps I bought with the old psasword.
How to get them please?
===========================
Sorry - no - all well, they seem to be all coming back - back just after I put this question.
Mysterious to me but very satisfactory.
Profile doubtless that of an ignoramus.

Ok, so I was able to find one but the one i'm most diappointed is the "free music" app i purchased and it had hundreds of songs that i didn't put on my desk top to save. So just so we're clear, I cannot get that app back again with all my songs if it wasn't in the "purchased" place?
Also,
my husband has a iphone 4 and i've been trying to connect it to our Garmin GPS through bluetooth. Now both devices recognize it but once a call is made or received, nothing goes through the GPS. I've had it working before but it was before a couple of upgrades. It is currently on ios7.2 upgrade. Is that why it won't work?
Thanks

NI LabVIEW Base Development System for Windows and NI CVS-1454

I have NI CVS-1454 and NI LabVIEW Base Development System for Windows (LabVIEW 8.5, no LabVIEW Real-Time Module and Vision Development Module). How can I build a LabView-program and run it on my CVS-1454?
Kirill Kostousov

Hi Kirill,
In order to use your CVS-1454 you will need to buy the LabVIEW Real-Time Module and Vision Development Module as these features are not supported in your version of LabVIEW.
Thomas Clark
Applications Engineer
National Instruments UK & Ireland

System for AE and PPro cs5

Hello,
I have finally got the budget for a long overdue upgrade from an amd turion 1,8 ghz laptop and i am considering two build options. One with a raid controller and one without one, going on software raid 0 with backup on external hdds.
Basicly both options are with the same core components, different beeing only the storage options
Option 1
Mainboard
I like it because it has a lot of sata 2 and 3 inputs
Mainboard Asrock P67   Extreme6 B3
174 eur
CPU
I plan to overclock to 4.2ghz
CPU Intel Core i7 2600K   SandyBridge BOX
275 eur
CPU Cooler
CPU Cooler Noctua NH-D14
80 eur
RAM
4 x RAM Kingston DDR3 4096MB 1333MHz CL9
150 eur
PSU
Not sure if it will sustain my storage configuration and a 4.2 ghz overclock...
PSU Corsair CMPSU-850HX 850W
153.4 eur
UPS
I just need 2 min so i could save my projects and shut down, i think its enough wattage...
UPS Apollo 1100F
54 eur
Case
I like this one because it has 8 HDD spaces and a lot of fans. I would have liked a LianLi, but there is no dealership in Romania.
Case Antec Dark Fleet DF-85
168 eur
Video Card
Would consider one with a Display port output, but not sure if i need one. I have a LED Samsung tv with only HDMI and VGA connections, and i would like sometimes to view the edit on a TV, not on a IPS panel monitor that i will buy:)
Video Card Palit GeForce GTX   580 1536MB DDR5
441 eur
External storage
Pretty good price and performance. I have 5 of these on usb 2.0, and i edited full hd P2 40min+, 3 layer multicam materials on these babies. Not too fast scrooling, but realtime playback ok.
HDD extern Samsung Story Station   Plus 1.5TB USB 3.0
85 eur
Optical Drive
Basic need, i prefer IDE because i can use the extra sata port on a hdd
LiteON   LNIHAP122-19 DVD-RW Black
       20 eur
Monitor
At first, and then his big brother HP LP2475W
Monitor LCD HP ZR24w
      360 eur
Storage
Here i have 2 possible configurations
Option 1: 6 TB - 4 HDD + 1 SSD
SSD for OS and page file
2x Seagate raid 0 for project files
2x WD raid 0 for media cache
2 x HDD Seagate Baracuda XT 2000GB   SATA SATA 3
281 eur
2x HDD Western Digital Caviar Black   1000GB 7200rpm SATA 3 64MB
155 eur
SSD OCZ Vertex 3 2.5 120GB SATA   3 MLC
258 eur
Option 2: 8 TB - 9HDD
Controller server Intel   INSASMF8I
221 eur
9x HDD Samsung Spinpoint F3 HD103SJ 1TB 32Mb                                                   562 eur
And an OS 320GB disk.
The controller option is a bit more expensive, but performance-wise, i understand its better. I tried to find areca, but they are not sold in Romania, and i need the warranty, so i cannot order from abroad. US prices are better, but when it comes in my country, i have to pay VAT wich in the end adds up to more then its worth at prices locally.
I tried to find in the user guide of the controller if i can add hdds to the array without formatting, so i could buy at first just 4 hdds and then add as i make the budget available.
First and foremost worry i have is that wthout the controller i have sata 3, and a 6 tb capacity with 4 hdds, rather than a 8 tb in a 9 hdd array... kind'ov expensive for the number of hdds... If i would add 2tb hdds to the array, it would be way over budget....
Total budget would be around 2800-2900 Euro...
I would like some opinions on the build if you have the time.
Thank you,
Sebastian Plamadeala
Bucharest, Romania

Anybody? Any ideeas?
Thank you!

Inactive Transformations and DataSources in Production System.

Hi Experts
We are working on BI 7.0 engine within Solution Manager.
We had some issues with DataSources initially while transporting BI Objects from Devp to Prod. We logged it into OSS and followed their procedure to redo the transports.
In the process, the issue was resolved but 2 New Transformations are created one for each Data Model (since I have only 2 InfoCubes) automatically and is the working model now.
Actual Transformations from Devp became Inactive in Prod and also there are 2 Inactive DataSources which are also from Devp. 2 New DataSources are again from Devp.
When I tried to Delete these unwanted Objects from Prod (I asked the Basis to Open Prod for me though this is not the best practice), it is asking for a Request ID. Also, since the Project has Gone Live already, I am scared if I might disturb the Production System.
Kindly, advise what best could and needs to be done.
Thanks,
Chandu

Initially, we implemented BI-HR module with standard content, which 3.x content (transfer / update rules)... in parallel we also did transformations & DTPs (BI 7.0 model).
Since, client wasn't sure with conversation of transfer rules (has lots of routines) to transformations & DTPs . So we transported both the models to prod sys... We created daily load process chains with transformations & DTPs... The actual plan was, if PC loads fails, then to go for manual loads of 3.x model...Fortunately 7.0 models was successful...
Then one month later, we deleted those transfer / update rules and 3.x datasources from prod sys, on the weekend (process chains runs only week days) without any issues...
We captured those deletion requests and deleted them from SE09 by unlocking them in SE03.

Error while transporting transformations and datasource Urgent need Help

Hi all,
I have been working on this problem for a few days now. I created an ODS object, transformations, DTP and I am using a R/3 datasource for extraction. The ODS populates fine in the Dev box, the tranformations and the datasource are fine only in the Dev box. I tried to tranport the objects to the QA box from the Dev Box. Only the ODS transports properly. The transformations are not transported at all. Here is the error I get:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Rule 1 of transformation   () is not valid and is being deleted
Rule 2 of transformation   () is not valid and is being deleted
Error occurred during post-handling RS_After_import for TRFN L
Ended with return code : ==> 8 <===
Please do let me know what could be the problem. Please do respond ASAP......
if you experienced this issue please let me know how you solved it or a possible work around. any help will be greatly appreciated....
So far we have been using only 3.5 objects. This is the first 7.0 (end to End) transport.

Hi voodi,
I just followed the exact sequence that you mentioned. I transported the
DataSource first....then ODS(write optimized)....then transformations....then Dtp & infopackage.
data source ... no errors
2) ODS ..... no errors
3) Transformations .... Error....same as mentioned in my earlier post....
4) DTP and Infopackage ....Error similar to whats mentioned ...and it says that transformation does not exist.
Could it be an issue with Source System Translation ..... I dont know much about it .....could you please tell me what it could be and how to resolve it.   I am thinking in these lines because the source system in QA3 exists in the Data Souces Folder and it has translated properly to QA3Client300. But under the Infoproviders folder (in Q03)...under my DSO the data source still shows Dev3Client 200(client not changed). If this is the issue do you think I need to talk to Basis support for asking them to modify the transport(internally)......can it be done....
please do give me your feedback....thank you.

How to Set Up OOTB code in Local System for Telecom and how to open EM

Hi AIA team,
I have newly stepped to the vast world of AIA.
I am very enthusiastic to learn the same
1.
I have Installed Jdev 11.1.1.4
Want to set up OOTB code for Telecom
2. Open an ID to access Oracle SR
3. Want to Open EM and deploy the code there.
4. I have SCA files of some project. Could SCA files be imported to Jdeveloper.
Please help me
Contact me: [email protected]

Made a copy of MCDOKZNR report and modified external_number_check form: it used to check the number against the interval set in dc10 (as External number range), now the check tries to match any external range.It works ok for my setup, but generally it's no good since original logic is broken.

How to set-up a wireless system for Mac and Windows?

In a few weeks I will visit my brother in Tennessee, USA who has a cable modem (very good speed - "Comcast") connected to one desktop PC (Windows XP I believe).
I want to spend 2-3 weeks at his home using my MacBook core duo (May 2006 version) via wireless-- and what is the BEST way to install a wireless internet access for my brother that I can use for the 3 week visit? NOTE: After I leave, this has to work for him wireless with his PC's - not Macintoshes. But I want to have the flexibility to be in several rooms of his long (but single story) home during my stay.
Can I use an AirPort Extreme Base Station "n" and if so, will my MacBook work with this at maximum download / upload speed (i.e. equivalent to the cable) - and will my brother's PC's also be able to connect? Or is there another Airport base station?
OR-- should I head down to "Generic Computer Store" and just by a wireless router (WiFi)(think that's what they call them) and connect this to his cable modem? IF SO WILL THAT WORK FOR MY MAC?
Thanks for any comments or references here -
Regards,
Steve

Can I use an AirPort Extreme Base Station "n"
Yes.
and if so, will my MacBook work with this at maximum download / upload speed (i.e. equivalent to the cable)
The speed of your internal network generally is much much faster than the speed of your internet connection. Unless he has an internet connection faster than approx 6Mbps then even dropping down to the old 802.11b Airport would not seen any decrease in speed of downloads etc...
and will my brother's PC's also be able to connect?
If his PC is 802.11b/g-compliant, it shouldn't have any problems connecting to the AirPort base station.
Or is there another Airport base station?
The other AirPorts would work, but the AirPort Express & older 802.11g AirPort Extreme base stations have a max. range of 150 feet.
OR-- should I head down to "Generic Computer Store" and just by a wireless router (WiFi)(think that's what they call them) and connect this to his cable modem? IF SO WILL THAT WORK FOR MY MAC?
That is always an option as well, especially since he will be the primary user throughout the year. I'd suggest going with a brand name, like Belkin, D-Link, or Linksys for the wireless router choice.

Original System for transformations and DataSources

Similar Messages

Maybe you are looking for