Original video file date changes when imported

When I import video files, the date of the original source file gets changed to the date of my importing it.
Premiere Pro CS4 never did that. Why is CS5.5 changing the date of the source file ??
steve

Hi Todd, --
I think you are saying my 'write xmp id to files on import' must be turned ON somehow. I did not do that, so if it is turned ON, it must be ON by default ?
It was both 'date created' AND 'date modified' that were being changed to the date of import.
Ok, I found that. It is turned ON by default, I turned it OFF. I also turned OFF the next one too - 'enable clip and xmp metadata linking'.
I just did a test import, and the 'date modified' of the video files on the hard drive has not changed. Thank you. VERY MUCH.
But, I have other problems too, with PP, and video file dates.
There's a 'date created' and a 'date modified' for video files. Plus, with Windows 7, there's a few more dates - 'date of content' etc.
My original untouched video file dates do not make any sense. 'Date Modified' is showing the date the video files were recorded. 'Date Created' is showing the date I copied the video files from the camera stick to the hard drive.
That makes no sense. They should be the reverse.
Why why why after 30 some odd years have the computer engineers NEVER made video files dates the same as digital photo files, with 'Date Taken'.
Also,
I have multiple cameras. For each event or trip or whatever I often take several 1,000 photos and videos. It's an absolute necessity to be able to mass import chronologically. The only way I can integrate / import them all in chronological order is by Date originally Taken, and then immediately drag all the files to the timeline while they are still all collectively highlighted in the order I just imported them all by date.
PP only allows for imports by 'date taken' for photos and 'date modified' for video files. And, if I don't immediately drag the imported files to the timeline while they are all still highlighted without doing anything else first, the bin window re-arranges them all by filename, and there is no way to later re-arrange them by dates.
This is extremely aggravating and impossible to work with for my need to import then later work with multiple-source recorded files chronologically.
All these 'date' problems for video files really totally screws that.
steve

Similar Messages

PLEASE HELP!! Why do my file dates change on import?

I'm trying to drag and drop iPhotos into Aperture or export a collection of files and then import them into Aperture, but the image date changes to a random date in the future when I do so.
What am I doing wrong?
How do I solve the problem?

hi, jan
quote: "Hmmm... the "Edit" button works for me, but it looks like the data I changed didn't actually change... even though the modified date on the .jpg file updated..."
I've been wanting to change the exposure EXIF data since I started using Aperture to make a 32bit HDR file from one photograph so as to fake bracketing of multiple photographs (with just one photo) and obtain a perfect exposure of difficult shots like forests, night city scenes, night clubs etc.
Back to the drawing board
Thanks for your help
victor

File names changed when imported into iphoto

I scanned thousands of photos and slides. I named them numerically with year and order it was taken (example for 102nd photo taken in 1984 is 84.102.jpg) I used Photoshop's file info to add a description on maybe 20% of the photos. Unfortunately, when I imported into iphoto, iphoto uses this information for the photo's file name. Is there a way to import photos into iphoto where it uses only the original files name and not embedded file info?

The ones that (on the originals) I entered descriptive things into Photoshop's XMP file info's document title line -- well that is what is shown as the name of the file rather than its real numerical name. Example: on a photo saved as 92
iPhoto uses the Exif and IPTC metadata for the photo information. When you typed "Big Snowstorm" in there you put it in the Title field. iPhoto is showing you the Title of the photo. It only shows you the Filename if there is no entry in the Title field. Had you put it in the Caption field you would not have this problem.
Try remove the title, see if that works.
Another commend: This format of filename
92.133.jpg
Is potentially very dangerous. Computers use the period to distinguish the filename from the suffix that tells your machine what the type of file it is. Currently, you're telling your machine that this is file 92, of the type 133 and also the type jpeg. Characters such as periods, slashes, dashes should eb avoided in filenames. Sooner or later your file naming convention is going to cause you problems.
Regards
TD

Video quality changes when imported into Final Cut Pro

I have video files that I have imported from an external hard drive that were transferred from an HD camera. When viewing the footage directly from the hard drive, the quality is great. Once imported into Final Cut Pro, however, there are small "flares" (don't know how else to describe them) that appear for split seconds across the screen. The best way to describe it is if you are watching a television that has an antenna, there will be static or interferance on the image. This is barely noticable but I can't determine what would cause the decline in quality. My video settings are set to DV NTSC 48 kHz and wonder if this is the problem or if anyone knows of something else that I should change prior to importing.

Thank you so much for your help! I am technically challenged and STRUGGLING to say the least.
Some files are definitely H.264 and I can convert them to ProRes. I also have clips that are
DVCPRO HD 1080p25, 1,440 x 1,080 (1,888 x 1,062)
Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
Current Size: 1,440 × 810 pixels
Will I need to do anything to those as well?
Here is the question I'm afraid to ask because I think I know the answer already. Can I simply replace the clips in my sequence with the newly compressed ProRes files or do I have to change all of the video and sequence settings and then start all over?

Frame Rate change when importing video into FCP 5

I am importing an HD h264 file into FCP 5. The video when opened in QT shows that it's frame rate is 30fps, what I exported it at. When I Import the file into FCP 5 it changes the frame rate to 29.97fps, which is causing major video/audio syncing issues. Any thoughts on how to stop the frame rate change when importing? I tried changing my system settings and audio/video settings before the import to match the file and it is still picking it up at 29.97, major headache especially since I'm cutting industrial.

yeah I'm kinda limited, working with video for the web and I'm making revisions as to what has been already posted. The H264s are the originals per say as we are using a screen capturing program to obtain the video, I could re export the originals at a truer format, but with the resources I'm given, its not truly the option I can afford to take. I've found a workaround through using imovie of all things, but I rather be in FCP. I've done some editing with h264s before and this is the first time I've seen this happen, it kind of reminds me of when I had an editor a few years back digitize video that was drop frame as non-drop.

Why is the date changed when I move files to an external drive

The date of my files is changed when I move them to my external Lacie drive.
Is there a way to prevent this?

Hi Luuk, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
This may be of interest
http://discussions.apple.com/thread.jspa?messageID=1463652#1463652
The date is retained in 10.4.8 here, on both a copy and a move to an external firewire drive.
Repairing Permissions in Disk Utility was another fix.

How i can play smoother HD video files in realtime, when i change the duration in cs6

How i can play smoother HD video files in realtime, when i change the duration in cs6.

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840

Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cps?

Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cds?

Hey amba1015,
I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/TS1387
Welcome to Apple Support Communities!
Have a good one,
Delgadoh

File size changing when pass through after effects (180Mb file goes in and comes out 33GB on export)

im processing a video recorded of an interview where the lighting was not very good on the interviewee
im brightening up the light on the interviewees face
the file was a 180Mb H.264 file on import
when i export the file its coming out at 33GB in size.... im not sure why this is
i have chosen the default setting "lossless" as the format for export
i just want the file to export the same size and quality as it was when i imported it
what options should i choose for this? AE does not seem to tell me how big the end file will be and it takes 1 hour and half to process this 2 minute interview so it will take me an awfull long time to get to the bottom of this if i try by myself
thanks

It doesn't "increase" the file size. You're making a brand new file.
What you put into After Effects has nothing to do with the resulting file. You can have an AE composition with no footage whatsoever and the resulting file will be much larger than 0!
After Effects works internally with completely uncompressed pixel data, so no matter what you toss into it, it produces whatever you tell it to produce. As Mylenium points out, you made an uncompressed final file.
Your original video file is VERY compressed. So, of COURSE uncompressed video is going to look massive by comparison.
Read Mylenium's link to understand a bit more and go here to learn AE: Getting started with After Effects There are lots of "gotchas" like this that'll bit your butt if you skip this basic training stuff.

File date modified on imported pictures

Hello,
I have imported a large number of pictures into iPhoto '08 from an external hard disk. Then I have checked the content of the "Originals" folder into the iPhoto Library. Some pictures have their file date changed to the date of the importation. I am not talking about the EXIF data but the files themselves.
All the pictures stored on my external hard disk have their file date set to the date of the shot. This is normal because I have transferred them from the camera to the disk then I have not modified them.
Do you know why iPhoto has changed the date of some of my pictures? Everything is fine for 99% of them, it happened only on the last pictures but I have not changed the way I transfer them...
I know that this is not a big deal because I can see the original date into iPhoto but I like to see it directly from the Finder when looking at file details.

LarryHN wrote:
Not weird at all - this is because when you import a photo into iPhoto it is copied into the originals folder - a new copy is "created" which of course sets that time as the "creation" time. The creation date is "when the finder created the file" - not at all weird
I understand and it sounds logic. But why are the other 99% of my pictures unaffected then?
Although this is probably relatively safe - I see no advantage to changing the creation date of the files since iPhoto ignores it and uses the EXIF date - and any time you make any change to any file within the iPhoto library you are risking corruption of the library
I synchronize the "Originals" folder with a Windows PC and I browse the pictures with the file explorer on that one... in "Details" mode. So, it is nice to see at first sight in the files list when the picture has been taken.
I know, it's not a big deal...

UIImage and original jpg file data

Hi,
i've encountered a strange behaviour in my iphone app that i didn't expect when using UIImage.
I would really need your expert help.
Assuming i have a jpg file (lets say.. somewhere in my app sandbox).
I load the image to UIImage using - UIImageInitWithContentsOfFile.
After that i use the UIImageJpegRepresentation and NSData object to write the image back as a file.
when i compare the original jpg file to the new one i just saved i see that the images are NOT the same !
Well, they look the same, but when i take a close look at both images i see a drastic change in the image's data (such as color space differences).
So, my question is - every time i use the UIImage object the original jpeg file data will be replaced when i write back to disk the same image ?
Isn't there a way to pass through the UIImage object but obtaining the EXACT same jpeg as a result ?
will my jpeg file data will change everytime i use UIImage ?
my app is really depended on jpg data consistency and i would like to know if that's possible..
please... need help.
thanks.

Hi,
thanks.
i still don't understand - is it possible to hold the jpeg data as raw data of an image which was picked using the ImagePickerController (i.e an image from the photo library). as i understand, since the picker controller gives me back an UIImage, the original jpeg data of the image file (the image from the photo library) is not available anymore because the UIIMage representation of the image is a bitmap (which means the photo library image was decompressed to be held by the UIImage).
what i really need is to hold the original jpeg raw data of the jpeg file of the image that was picked from the photo libray. it seemed to me that after i get the UIImage from the controller and save it to my sandbox as a jpeg, the original image from the photo library and the new saved image are not the same in terms of size and color space.

Possible to change date format when importing files into Aperture 3

Just wondering if it is possible to change the format of the date from YYYY-MM-DD to YYYYMMDD when you rename files as they are imported into Aperture 3? I typically rename my files and insert my initials, date the photo was taken, sequence number, camera used and original file name. When I do this in Aperture 3, the date format used includes dashes. I would like to have the file renamed without the dashes in the date. Is this possible?

You should be able to edit the format in the import presets. I have done this for folder stucture of imports, I believe you can do the same for the file renaming. At the bottom of the drop down box for file naming at improt should be an edit option which brings up the import naming presets, select the "YYYY-MM-DD" and remove the dashes.
Matt

Why poor quality AIC & Apple ProRes HQ video when compared to original video files!

First, I'm a long time PC user who has recently switched to Mac's and I'm rather picky about the quality of my videos.
Problem: I have HD video from a Canon HF S10 camcorder and Canon EOS 7D that looks fantastic on a PC... but looks very so-so once imported into a iMovie or FCE or FCP. I've tried all three programs using AIC and yes I've even tried Apple Pro Res HQ (FCP 7.0 log & transfer) and still end up with very poor quality mov files when compared to the originals. Part of the problem (or benefit of a PC) is that the PC actually plays the original RAW MTS/M2TS/MOV files without any trouble and and they look unbelievable. Where as my Mac has to import/convert the file to AIC or Apple Pro Res HQ... so no matter what codec I use, my Mac produces video that is not even close to what I get out of my PC.
My original RAW files are all 1920x1080 60i and are MTS files from the HF S10 and Mov files from the 7D. Even the original RAW Mov files produced from the 7D don't look as good on my Mac as they do on my PC. I even took a SD card with the original files down to the local Apple store to see how they look on a Macbook Pro and they still don't look like the originals on my PC. Also, all my comparisons are being done side by side on two 24" Apple cinema displays at full size (1920x1080) that are calibrated. What am I doing wrong and why the loss in quality? Any ideas as to why the quality is just so-so when compared to the originals would be greatly appreciated. Thanks in advance.

The thing that is wrong is that you are judging the quality of VIDEO on COMPUTER monitors. Properly calibrated or no...this is not how you do it. Calibration for computer monitors sets them right for PHOTOSHOP and color, not VIDEO and proper monitoring. Only getting a signal to a broadcast VIDEO monitor, or HDTV, will show you what you really have. And for that you need an HD input/output device or capture card...and the HDTV or HD monitor.
Computer monitors are never the place to judge video quality. Resolution is typically lowered to allow for full frame playback. Even if paused.
Shane

File name changes when I sync videos

As title says, when ever I load a video into my 3Gs Iphone the file name changes to a numerical one.
How do I keep the original file name?
As it is I can only sync 1 video at a time then rename it before adding another.

Oops, Just realised I put this n the wrong forum. Just to clarify this is prerecorded video files.

Why poor quality AIC & Apple ProRes HQ when compared to original video files!

First, I'm a long time PC user who has recently switched to Mac's and I'm rather picky about the quality of my videos.
Problem: I have HD video from a Canon HF S10 camcorder and Canon EOS 7D that looks fantastic on a PC... but looks very so-so once imported into a iMovie or FCE or FCP. I've tried all three programs using AIC and yes I've even tried Apple Pro Res HQ and still end up with very poor quality mov files when compared to the originals. Part of the problem (or benefit of a PC) is that the PC actually plays the original RAW MTS/M2TS/MOV files without any trouble and and they look unbelievable. Where as my Mac has to import/convert the file to AIC or Apple Pro Res HQ... so no matter what codec I use, my Mac produces video that is not even close to what I get out of my PC. My original RAW files are all 1920x1080 60i and are MTS files from the HF S10 and Mov files from the 7D. Even the original RAW Mov files produced from the 7D don't look as good on my Mac as they do on my PC. I even took a SD card with the original files down to the local Apple store to see how they look on a Macbook Pro and they still don't look like the originals on my PC. Also, all my comparisons are being done side by side on two 24" Apple cinema displays that are calibrated. Any ideas as to why the quality is just so-so when compared to the originals would be greatly appreciated. Thanks in advance.

If you're working in Final Cut Pro you should try that forum. What version of the software are you using? The AVCHD media should be ingested using log and transfer. The 7D media should be converted using Compressor. You don' need HQ, ProRes is sufficient. How are you monitoring the video? Are full size on a video monitor? All this should be explained on the FCP forum. FCE does not work with ProRes in any form.

Original video file date changes when imported

Similar Messages

Maybe you are looking for