Originals disappeared after renaming project

Hello!
After the import from a SD-card into a new project in Aperture I have
a) firstly deleted the photos (****!), then ...
b) created some new projects and finally ...
c) moved the initial photos from the new project into the other projects.
The result of all this is that all photos are still in Aperture (even in full-screen-modus) but the originals are not here anymore! Every time I try to edit/delete/export/send the photos Aperture refuses to do it and shows me in the error-message that the originals couldn't be found. Not even Spotlight/TimeMachine find them!
I could also repeat the whole process: I made new photos, imported them into a new project ... they were still there, even after restarting Aperture ... as soon as I rename the project Aperture said that the originals disappeared!
Do you have an explination for that?
And perhaps even a method to restore all the lost photos?
Desperately,
Vlad
P.S. iMac 3.06 GHz, MacOS X 10.5.5, 4 GB Ram, Aperture 2.1.2.

Honestly I cannot even remotely begin to figure out exactly what you did or did not do. My best guess here is that you imported the photos as referenced masters (leave images where they are option) and got rid of the masters at some point. If this is the case you are most likely SOL as the only recourse is to use a recovery program that takes forever to run and is the most successful the less volatile the file system/disk that it is recovering.
If you have a vault or other backup obviously they are still there. If not now is the time to fix your work-flow in a couple of ways.
RB
Ps. If this is not the case it is something inane but I will trust you when you say that they are gone. 99.9999% probability that Aperture didn't get rid of them if they are gone - you did. Gotta love all the folks espousing "only use referenced files no matter what".
Message was edited by: rwboyer

Similar Messages

  • Deploy occurs errors after rename project.

    deploy occurs errors after rename project.
    local project (in JAVA perspective refactor->rename)
    then rebuild,create,deploy.an erros occurs:
    2009-5-19 9:35:35 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [013]Deployment aborted
    Settings
    SDM host : 10.98.3.59
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME1/ADMINI1/LOCALS~1/Temp/temp6550783345363564101WYJ_WD_FlightList.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/ADMINI1/LOCALS~1/Temp/temp6550783345363564101WYJ_WD_FlightList.ear
    Aborted: development component 'WYJ_WD_FlightList'/'local'/'LOKAL'/'0.2009.05.19.09.30.59'/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application local/WYJ_WD_FlightList.. Reason: Clusterwide exception: Failed to deploy application local/WYJ_WD_FlightList. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:      com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/WYJ_WD_FlightList. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted
    Can anyone help me?
    thanks a lot!

    Thanks for Rajat Jain  and Umang Mathur  's answers 。
    the demo project can be download in SDN::TutWD_FlightList.zip   
    before i sign this thread ,i've followed the issue : (project folder，.project file )
    Rename package for an existing Web Dynpro App
      tips:if i only change .project file,i can not import the project.
    but these do not work。it shows the same erros.
    after then i just try to redo this in the other way: (in java perspective ,refactor->rename)。
    it shows the same errors.
    my environment:
    studio:Version: 7.0.11
    JAVA AS:7.00 sp18

  • CPD file smaller after renaming project

    Hello,
    I have renamed my RoboHelp project and have noticed after the project has been renamed, the cpd file in the renamed project is much smaller than the CPD file from the original project. Is this something to be concerned about? Why is the file so much smaller?
    Thankyou
    kt_25

    See here.
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

  • Photos disappeared after renaming them

    My photos on photobooth disappeared after I renamed them. I clicked on "reveal in finder" and after I renamed them, I could no longer find them. Any idea where I should look?

    You can always restore them from your iCloud or iTunes backup ...
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946

  • Pics in iPhoto Disappeared after renaming iPhoto Library File in Finder

    Friends,
    I was working on my parents computer in an effort to help them organize their files, etc.
    They have iPhoto 6 and I renamed the iPhoto Library folder in Finder. Obviously this is not a good idea since now there is no content (pictures) in iPhoto.
    This action made a new folder (with the new name) in Finder's 'pictures' section. So, I tried to copy and paste (or maybe I dragged it, cant recall) the contents of the newly named folder back under the 'iphoto library' folder however, that did not make the photos reappear in iPhoto.
    After moving (I think I highlighted & dragged) the file contents of the newly named folder back in the 'iPhoto Library' folder, I deleted the newly named/created file.
    It appears as though the images are still in the original & modified folders however, no pics in iPhoto.
    And, the irony of the entire action is that I was renaming the 'iPhoto Library' folder to 'iPhoto Library - Do Not Touch' so my parents would not mess with the content as they have done in the past. Apparently, I am the one who needs to stay away.
    Thanks a bunch!

    Thanks Badunit, and yes, you are correct about not having the newly named library to choose when holding down the Option key while opening iPhoto.....b/c I drug the contents back under the original iPhoto library folder and then deleted the newly name folder.
    The individual pics seem to be in the modified & originals folder but I do not know how to get them back into iPhoto. Importing one by one doesnt seem like the correct option.
    I attempted to rebuild the iPhoto library but that resulted in nothing happening when I choose that option.
    I know there is a solution but I dont know the smartest next step. I have read related discussions that almost provide a solution.
    Currently, I need to figure out a way to:
    1) get what seems to still exist in the modified & original folders back into iPhoto even if it means loosing albums, keywords. I am hoping this route doesnt wipe out dates that the images were taken. If there is a way to get them back into iPhoto this route, I need instructions.
    or,
    2) I have a back up of the entire HD on an external HD. Would it be best to somehow use that to replace what I have on the computer HD? I do not know how to do this so for sure need guidance.
    Help! I need to get this fixed today (i.e. father is getting an iPad for retirement at a big reception and I need the computer in working order to make it all happen so he has pics on the iPad to display at the event). I think I may have to page TD or Old Toad....
    Thanks friends!!

  • Premiere Elements 9 window disappears after loading project

    Hello all,
    I've been having issues with Premiere Elements (9) lately. I have read other threads similar to my problem and followed some of the instructions (deleting the Pref file, for example).
    Whenever I open a specific project (that has worked before until recently), the loading progess bar goes from 0-100 and then it stays there. After that, the entire program disappears. It doesn't crash (as it's still in the task bar), but when I click on PrE9, nothing comes up. When I mouse-over the icon on the task bar, it's just the window buttons (minimize, expand, exit).
    The reason I started this thread is because none of the problems I found were really similar to mine.
    Any help would be much appreciated.
    (Also, please pardon me if this thread is in the wrong place.)
    Thanks!

    Unitedmoviemaker
    Have you looked at any possible involvement of the antivirus program in the way of recent updates for it? Recent Windows Updates? Can we assumed that you have not added, subtracted any programs that would coincide with the onset of the issue?
    Have you checked to make sure that your video card is up to date according to the web site of the manufacturer of the video card?
    Recently, with Premiere Elements 10 and NVIDIA video card, answers have come from rolling back the driver.
    I guess you tried the Adobe Premiere Elements Prefs file deletion. But, did you try deleting the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists?
    Do you have the Premiere Elements 9 installation disc for installations files in case a deactivation, uninstall, run through of ccleaner, reinstall is indicated?
    But, let me backup for a moment. Is this issue confined to one previously created project or to all your Premiere Elements projects either new or old?
    Let us start here and then move forward according to your answers.
    Thanks.
    ATR
    Add On...Usual...confirm that you have the latest version of QuickTime installed, you are running the program as the 9.0.1 Update, and you are running the program Run As Administrator or from a User Account with Administrative Privileges.

  • IPhoto 09 originals disappeared after Aperture 3 import

    *My situation as it used to be:*
    Aperture 2 contained my iPhoto library as referenced masters. All was good.
    *My current situation:*
    After updating to Aperture 3, I decided to import all of my iPhoto files so I'd have a single library with all my photos. Like some other people, I ran into strange issues with only some of my photos being successfully imported. This led me to try to import my iPhoto library several times, both using "Import > iPhoto Library…" and the media browser. I also rebuilt my iPhoto library (by holding down cmd + opt while opening the program) a couple of times, and eventually gave up, thinking it might get fixed in a future update.
    Now, a few weeks later, further inspection reveals that a significant portion of my iPhoto images have in fact been deleted. Specifically, I've still got all 1437 thumbnails, but only 200 or so of the actual images. The ones I've got, I have both in the "Originals" and "Modified" directories, but like I said, more than a thousand are missing. I don't know how or when this happened, but it's not how it used to be, so I can only assume that it has something to do with my escapades described above.
    Unfortunately, I've backed up after attempting to consolidate these libraries, so the situation is the same on my sole backup drive. I know I should have redundant backups, but I don't.
    I've got two questions:
    i) Is there any way to get these images back? I don't see how it could be done without some serious forensics, but I have to ask…
    ii) Has anyone else experienced anything similar? Like I said, I'm not sure how it happened, I just assume there's some connection between said events and my files going missing. It seems reasonable to me.
    Thanks,
    Anders

    Update
    Thanks for your reply, Terence. I think I've figured out what happened. In addition to my iPhoto library, I used to have a folder hierarchy of old photographs as referenced files in Aperture. All of those images are gone from their original folders, but they are still in my Aperture library.
    What I think happened, is that I brought the files into my Aperture library with "Consolidate Masters…", thinking that would copy the originals into Aperture, not remove them from their original path. Later, when I discovered that my iPhoto folder was out of date, I removed it (as there is no synchronization feature) so that I could reimport all of the images once and for all. Because the files had actually been removed from their original place inside the iPhoto library, this failed miserably. It seems that the 200 or so images I was able to import, were the ones that had been modified in iPhoto and were still intact inside the "Modified" folder.
    I guess you could call this a PEBKAC moment, but I still think Apple's approach to dealing with this stuff is more confusing than it should be.
    I downloaded FileSalvage and ran it in trial mode. It seems like a decent piece of software, and was able to find about 20,000 jpegs in five hours or so, with the default settings; but I thought the price was a bit steep, so I decided to give PhotoRec a try before paying up.
    It ran for something like 18 hours, but when it finished, I had about 76,000 jpegs recovered. Of course, the vast majority of those are cached images of web pages, iPhone screenshots (for the animation effects, presumably), etc. The only downside of using PhotoRec is that it doesn't seem to recognize .cr2–files; I checked the .crw–box, hoping that would cover it, but apparently not. Almost all of the images I lost were jpegs anyway, though, so in my case it's no big deal. I highly recommend it.
    Now I just have to reorganize about a thousand images hidden among 75,000 others, all with anonymous file names. Fortunately, the Finder search options (such as Pixel width & height, Created date, Device make, etc.) greatly simplify this task.
    If anyone's using an *online backup service* they're happy with, I'd be interested to hear about it. I know a bunch of names (Carbonite, Mozy, JungleDisk, BackBlaze, iDrive…), but I haven't used any of them. I'm curious as to how much they would affect the performance of my computer and network bandwidth.
    Thanks,
    Anders

  • Subgroups disappear after closing project. Is there a subgroup limit?

    I have a program that takes in voltage inputs and converts some to rms current values and some to rms voltage values.  I created subgroups to use scaling factors in two seperate formula steps that would output the scaled rms voltage and currents.
    After saving the project and reopening, the subgroups are gone and the formula steps have the wrong inputs.
    I have redone the project many times with no success.  Is this a common problem? Or are there subgroup limitations?

    This issue is currently being addressed by R&D. A Corrective Action Request (CAR) has been filed and can be referenced with #124517.
    Regards,
    Glenn
    Applications Engineer
    National Instruments
    Regards,
    Glenn

  • Team tab disappears after loading project

    I recently setup Project server to TFS integration. I was able to run all the cmdlets fine. One of my projects (QATASks) integrates between Project server and TFS fine. However when I create a new project (Test1) in project server and TFS run the /mapplantoteamproject
    command and then open the Enterpriseproject in Project 2013 the "team" tab initially appears and then disappears. When I open QATasks the team tab appears and when I open Test1 it appears initially and then disappears.
    I have checked addins to make sure Team foundation addin is not inactive or disabled. Pl help - at my wits end. 
    I have also compared all permissions between QAtasks and Test1 and everything is setup correctly.

    Unitedmoviemaker
    Have you looked at any possible involvement of the antivirus program in the way of recent updates for it? Recent Windows Updates? Can we assumed that you have not added, subtracted any programs that would coincide with the onset of the issue?
    Have you checked to make sure that your video card is up to date according to the web site of the manufacturer of the video card?
    Recently, with Premiere Elements 10 and NVIDIA video card, answers have come from rolling back the driver.
    I guess you tried the Adobe Premiere Elements Prefs file deletion. But, did you try deleting the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists?
    Do you have the Premiere Elements 9 installation disc for installations files in case a deactivation, uninstall, run through of ccleaner, reinstall is indicated?
    But, let me backup for a moment. Is this issue confined to one previously created project or to all your Premiere Elements projects either new or old?
    Let us start here and then move forward according to your answers.
    Thanks.
    ATR
    Add On...Usual...confirm that you have the latest version of QuickTime installed, you are running the program as the 9.0.1 Update, and you are running the program Run As Administrator or from a User Account with Administrative Privileges.

  • Receiving CS0246 error after renaming solution and project.

    I am receiving this error...
    Server Error in '/RCIS.Mapping.WebApplications' Application.
    Compilation Error
    Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. 
    Compiler Error Message: CS0246: The type or namespace name 'MappingServicesWebApplications' could not be found (are you missing a using directive or an assembly reference?)
    Source Error:
    Line 26: using System.Web.Optimization;
    Line 27: using System.Web.Routing;
    Line 28: using MappingServicesWebApplications;
    Line 29:
    Line 30:
    Source File: c:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files\rcis.mapping.webapplications\4e36dc23\d07c1fd0\App_Web_index.cshtml.a8d08dba.0ryezucn.0.cs    Line: 28 
    Show Detailed Compiler Output:
    Show Complete Compilation Source:
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.34237
     after renaming the Solution and project from "MappingServicesWebApplications" to "RCIS.Mapping.WebApplications"
    I've searched the entire solution and can not find the text "MappingServicesWebApplications"
    anywhere...the solution builds fine, this is only happening at runtime...I'm not sure where to look for what is generating this text?

    Hi T junky,
    Glad to see this issue has been resolved and thank you for sharing your solutions here.It will be very beneficial for other community members who
    have similar questions.
    Have a nice day,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

    aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

    “Hi Kirby, thanks a lot for your answer.
    I got one answer, from DMoore, saying:
    “Try Safe boot and then restart with only Aperture open.  Still doent work write back with more details like Ram, HD capacity/free space.  Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
    Safe boot   http://support.apple.com/kb/HT1564
    Starting up into Safe Mode does several things:
    1  It forces a directory check of the startup volume.
    2  It loads only required kernel extensions (some of the items in /System/Library/Extensions).
    3  In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
    4  It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
    5  It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
    6  It disables all startup items and login items (Mac OS X v10.4 or later).
    7  Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
    As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
    But I understand your questions, so I’ll try to answer them;
    "loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or  I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
    I can see images in the Browser, so it only happens in the Viewer(s).
    I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers  – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
    Did Aperture work before?
    Yes it worked ok for a while, but I only purchased it on 24th May.
    If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
    So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
    But I have not changed the default Preview settings in Aperture Preferences.
    My macbookpro details:
    2.7 Ghz Intel Core i7
    Memory: 8 Gb 1333 MHz DDR3
    Hard Drive capacity 499.25 GB
    Available 387.36 GB
    I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
    I hope this helps you to understand more.
    Thank you for trying to help me.
    Tony

  • Renaming Projects in RH6

    I have a pretty large project created in RH6. I'd tell you
    how many topics are in it, but RH6 crashed while running the topic
    report.
    Anyway, I'm a template nut: I like having a bare-bones
    project with topics linked, index created, etc., then make a copy
    of the entire project, and apply client-specific info to the copy.
    This method involves renaming the project copy, but I've not had a
    great deal of success here. When it's finished (or when I think
    it's finished), there are so many broken links afterward, that I'm
    forced to delete the copy, make another one and try again.
    No, there are no broken links in the original project.
    I am not using RoboSource Control.
    I have not made any attempts to rename anything with Windows
    Explorer or another 3rd party tool.
    Is this just symptomatic of "version point zero" gremlins? Is
    there an ETA on a patch?

    Hey Peter. yes, I'm glad it works too. I've got a lot to
    report:
    1) I have no HHP file in the renamed project at all. The HHP
    file exists in the original, however. And when I copied the
    original project to the new folder in Windows Explorer, you can bet
    the HHP file was there too. Only after the renaming did the HHP
    file disappear.
    2) There IS an fpj file in every folder. Do you mean why
    would a list be needed? A list would be needed so that during
    renamings, RH6 can check the list to ensure all of them are
    accounted for. In this case, clearly, somehting is happening to one
    of them. So perhaps a list isn't the worst idea?
    3) Yes, I've made another copy, I've renamed the copy and the
    very same subfolder's fpj file is getting wiped out. There's
    nothing missing with the original project, I assure you. So if
    those subfolders are present in the original project, then they're
    present in the copy. And by the way...it's not that there's no fpj
    file in hw. The file exists. It just contains this:
    <?xml version="1.0" encoding="windows-1252"?>
    <rhpml majorversion="1" minorversion="0">
    <folders>
    <folder>
    <name>images</name>
    </folder>
    </folders>
    <topics/>
    </rhpml>
    In the above, I notice there's no <topics> tag to
    accompany <topics/> (which is the wrong syntax anyway). It's
    completely correct in the original fpj, filled with a list of
    topics and folders.
    What's truly baffling is this: if the fpj file is being wiped
    out, then how can it be that all the links between the pages in hw
    and all the subfolders are intact? After all, only the TOC and
    Index links are broken.
    Somebody cue Rod Serling: "Submitted for your
    approval..."

  • Playlist disappeared after software update

    Hello,
    All my playlist disappeared after i upgrade my itunes to the version 11.1.5 (5).
    Can anyone help me?
    Thank you

    Joshua
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • Image disappears after effect in HTML5

    Hi
    I am using Captivate 7.0.1.237.
    I have set up my project as follows:
    Slide 1:
    1. I have an image that has an effect of Left to Right. When the project is launched, the effect is paused using an adv. action. Got a variable, say Var_1, in an adv. action to pause it: On enter, if the variable is 0, then pause.)
    2. I have a button to generate a random number. This number is assigned as the new value of Var_1.
    Slide 2:
    Have an On Enter adv. action: If the value of Var_1 is "n", then pause.
    Though I have not explicitly mentioned, the project moves to next slide if the Var_1 value is not "n".
    Now, this is working fine in SWF output. However, in the HTML5 output, when the value is "n", the slide pauses but the image disappears after the animation effect.
    Any idea why?
    Thanks in advance.
    Sreekanth

    The current frame number when the action runs and when slide pauses as per the actions is same in both SWF asnd HTML5 outputs. Here are the screenshots. The yellow colored object is the one that has the effect. 181 is the frame number.
    SWF Output
    HTML5 Output. Notice the yellow object missing
    I noticed one interesting difference in starting frame of SWF and HTML5 outputs. When I launch the preview the SWF (using F12), the current frame number is 0, whereas the first frame in HTML5 preview (using F11) is 1. I am not sure if that has got anything to do with the issue I am facing.
    Sreekanth

  • After putting an entry into the calendar it disappears after a few seconds

    Calendar entries disappear after a few second and do not sync between iPad and iPhone.

    Hi,
    Go to c: program files*86:common: adobe: sl cache, rename the sl cache
    Go to c: program data: adobe: sl store: rename the sl store to old sl store.
    Right click on premiere pro and run as admin.
    Thank You
    Arjun

Maybe you are looking for