Orignaly App error 606...help

Device info.
Im with 3, however i did not receive the handset from them. Its a Blackberry torch 9810.
I Assume it was/is running the newest OS, but at this time i cant turn the device on to check.
My desktop software version is 7.1.0.37.
Issue.
My phone a couple of days ago was unexpectedly turned of. When i tried to turn the device back on, it took a long time getting half way through the OS booting loading screen, crashing and starting again. Eventually it got past the loading screen and showed me the app error 606 screen.
Now all the phone does when trying to boot up is get stuck in a loop of the blackberry loading screen, crashes after about 20 seconds, then starts again when the red light comes on. When attempting to connect to the computer using blackberry to usb wire, to reload the OS, it stays contended for about 20 seconds, the same time the phone keeps crashing. It just keep losing power, even though Ive been charing it for a while.
Ive tried following Knowledge base
-KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
-KB20371 BlackBerry Desktop Manager cannot communicate with the connected BlackBerry device
I know i have to reload the OS, however first i need to make sure the blackberry stays connected.
In Knowledge base KB10144 How to force the detection of the BlackBerry smartphone using Application Loader i get stuck on the step where blackberry software can not communicate with the connected device, either click Retry, Update or Cancel, when i click update, then repair, it just says there are no updates available, and a form below where you can enter your email address. Does not repair the phone at all. Is it supposed to open the application loader? I think this is all to do with the fact the phone keeps switching on then off, when either charging or trying to connect to the computer.
Might just be me being an **bleep**. But am i missing something? Ive read a million threads to do with the app error 606, Ive tried for about 2 days now to get a proper connection to the computer, or even just to see the app error screen again. Just always gets stuck on the black berry loading screen.
Any help would be much appreciated.

theotedted wrote:
No other ideas then. Just get a new phone....
Have you tried wiping the device completely? You can skip to step number 5 if you want and see if BBSAK will connect and wipe the device. Then you'll need to come back to step number 3 (you can skip the backup since you can't make a backup at this point.) Another trick is to remove the battery and attempt to connect to the device.
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. It doesn't hurt to do a manual backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. You can get BlackBerry Desktop Software here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file from step 1 to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml." Also check the following locations for vendor.xml files and delete any instances of the file:
On Windows Vista/7 navigate to C:\Users\YOUR_USER\AppData\Roaming\Research In Motion\BlackBerry\Loader XML (Where "YOUR_USER" is your username)
On Windows XP navigate to C:\Documents and Settings\YOUR_USER\Application Data\Research In Motion\BlackBerry\Loader XML (Where "YOUR_USER" is your username)
5. If you're simply updating the OS to a newer version skip this step. If doing a clean OS reload use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to next step.
6. Plug in BlackBerry and double click on "Loader.exe." It's located in c:\program files\common files\research in motion\apploader
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

App Error 606 ~ Please Help

Just upgraded to OS 6.0. Deleting unwanted mailboxes > asked to update Email Set Application > did so > BB dies with message...App Error 606, Reset.
What to do?

At this point, you'll need to reconnect to BlackBerry Desktop Software to get anywhere with your phone. Have a look at this article from RIM:
http://www.blackberry.com/btsc/KB10144
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

App error 606 and can't connect to desktop software either

hello,
today my blackberry (bold 9780) rebooted and once it restarted i got the app error 606, which i can reset over and over again (no help). i've googled and found out there were more people who've come across this problem. there were a lot of suggestions to use the dekstop software to backup and reinstall. but now i can't even connect to the desktopmanager, and the 'update' button isn't working either. i'm using a macbook pro (10.5.8) by the way. what can i do?
thanks.

Hey,
I already had it fixed. I know you can reset it via desktopmanager and there are some problems with new macs. But my mac isn't new (so no 64bit problem) and it wouldn't recognize it begin with. I never found out it had something to do with the fact that i never connected it before.
What I did was go to the store, had it send away.. So blackberry did the reset job for me. I got it back in 4days which made it less **bleep** haha.
I immediately connected it to my mac, and all was fiine.. So some can reset even with an error and some don't.. Hope this says enough.

App error 606 reset

I updated by Verizon BB Bold 9650 three days ago to OS 6. It worked fine until this morning when I turned the phone on and received a 102 error on the phone. I performed a re-install of the most recent OS6 using BB desktop software. After installation I received this message:
Your BlackBerry® Device Software is updated and you can safely disconnect your device.
Warnings were encountered during the loading process:
The following modules could not be loaded because their digital signatures were invalid.
    SecurIDLib.cod
    net_rim_bb_diagnostic.cod
    net_rim_bb_file_explorer_library.cod
    net_rim_bb_fileindexservice.cod
    net_rim_bb_medialibrary.cod
    net_rim_bb_media_framework_api.cod
    net_rim_font_european_sff.cod
    net_rim_font_arial.cod
    net_rim_font_courier.cod
    net_rim_font_georgia.cod
When turned on, the phone cycles through several error screens ending with a white screen stating App Error 606 reset, then another screen stating failed task: 'JVM'.
Have tried reloading OS5 software without solution and attempted x3 to reload OS6 with same result.
Any help is greatly appreciated.

I updated by Verizon BB Bold 9650 three days ago to OS 6. It worked fine until this morning when I turned the phone on and received a 102 error on the phone. I performed a re-install of the most recent OS6 using BB desktop software. After installation I received this message:
Your BlackBerry® Device Software is updated and you can safely disconnect your device.
Warnings were encountered during the loading process:
The following modules could not be loaded because their digital signatures were invalid.
    SecurIDLib.cod
    net_rim_bb_diagnostic.cod
    net_rim_bb_file_explorer_library.cod
    net_rim_bb_fileindexservice.cod
    net_rim_bb_medialibrary.cod
    net_rim_bb_media_framework_api.cod
    net_rim_font_european_sff.cod
    net_rim_font_arial.cod
    net_rim_font_courier.cod
    net_rim_font_georgia.cod
When turned on, the phone cycles through several error screens ending with a white screen stating App Error 606 reset, then another screen stating failed task: 'JVM'.
Have tried reloading OS5 software without solution and attempted x3 to reload OS6 with same result.
Any help is greatly appreciated.

Torch App Error 606 + Can't connect to desktop Manager

Hi,
I was backing up my blackberry torch last night and the connection was disconnected during the backup. When the phone restarted the message "App Error 606" / "Reset" came up. I can't do anything on my phone except for reset it, and pulling the battery does nothing.
When I try to connect it to blackberry desktop software it wont connect... I left it for an hour and it still just said that it was connecting.
I also tried connecting to BBSAK and it couldn't connect there either, so I can't reset it to factory settings. I checked the desktop manager and it recognizes the USB port as connected to a blackberry device but that is about as close as I can get to connecting to anything.
I have a backup of all of my information from before this happened so I don't mind completely resetting my phone, but I have no idea how to do this without being able to:
a) connect it to the computer
b) do anything except reset on the phone
Any help would be great!
Thanks,
Mike

Try in Safe mode, remove last installed 3-th-party appliction, may be it's help you?
Safe mode:
When starting the BlackBerry smartphone, safe mode can be used to prevent third-party applications from running automatically. Safe mode is designed to allow troubleshooting or remove any unwanted applications.
To turn on safe mode, complete the following steps:
Remove and reinsert the BlackBerry smartphone battery.
When the red light-emitting diode (LED) light goes out, press and hold the Escape key as the BlackBerry smartphone is loading. See KB05470 for the location of the Escape key. (The Escape key is located on the right side of the trackball, above the keyboard on the BlackBerry smartphone.Use the Escape key to exit a screen, move back a page in the browser, close a message, or close a menu.)
When the dialog box appears, click OK.
Note: Safe mode is indicated by a safe mode indicator in the BlackBerry smartphone status section of the Home screen.
To turn off safe mode, remove and reinsert the BlackBerry smartphone battery.
Be sure to click Likes! for those who have helped you.
If your query is resolved then please click on “Accept as Solution”.

App Error 606

Hello, my blackberry is giving me "App Error 606" with a white screen and "Reset" I reset the phone but nothing happened. I couldn't connect the phone with the Blackberry Desktop software ! How can I fix the problem without losing my data. note: I didn't packup my device ! Another question is if updating the OS will fix the problem, would my files remain the same or everything will be deleted after the update is done ?!

Hi q8fh and littlebird3450
Welcome to BlackBerry Support Community Forums
As you are unable to start you device on safe mode to do a backup as adviced above, so you might loss your data in order to recover your device . Please follow the WorkAround suggested within this KnowledgeBase to Recover your device :
KB23954 : "App Error 606" is displayed on the BlackBerry smartphone.
So please try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

TS1717 Installed the iTunes 10 update on my computer (Windows 7). iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help. Tried setting up a new user, no help. What's wrong??

Installed the iTunes 10 update on my computer (Windows 7). iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help. What's the fix??

Hi sahgin,
The issue eventually resolved itself, I still don't really know why. I kept up with Windows update, and attempted downloading iTunes again from the Apple website, and it just... worked. It now works fine. I don't know why it took approximately 4 months to work, though.
I'm sorry I don't have any more helpful information. Posting here was my last resort, and clearly Apple never bothered to reply.

App error 552 PLEASE HELP ME!!!

Hi for days now i have had a white screen and small writing on saying app error 552. The phone will not come on at all, just resets to the same screen so I cant do anything via the phone.
I asked on my facebook and was giving a link to try for some software. I downloaded it and it recognised my phone (well i think it did) but kept saying no updates available. and wouldnt do anything basically could not choose options or device as no highlighted options.
I was then told today to download another which i did, I downloaded blackberry device software for my phone and installed.
After installation and On starting the program, it comes up with : Devie connection, enter pin?
It does not have any options and wont let me input anything in to it.
I was told if I got the software I could plug in to the computer via a usb and do a master reset, or reset and delete all files and hardware and this would sort out the problem.
I just need help, i can do it if i have clear instructions to read, simpler the better lol. I dont want to have to get a new phone.
I dont care if i lose everything as long as i cn use it and get stuff back on it.
Please help all suggestions welcome.

Hello,
First, start with this reference:
Article ID: KB18751 Error "Reload Software: 552" is displayed on the BlackBerry smartphone
Next, please conduct these steps as preparation:
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below. (this is likely moot in your situation)
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Now, attempt to use these tricks..however, please substitute the Desktop Sofware or LOADER.EXE from the above rather than any update website they may direct you to:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

My ipad2 won't accept my apple password for new app install. I've tried several time and get a pop up "unknown error". Help?

Sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try again.

BB Bold 9900 APP ERROR 200.....HELP!!!

I have a BB Bold 9900 and has the white screen with App Error 200 Reset screen, I have tried taking the battery out and plugging it into computer to reset it but comes up with the update screen and then says repair and then says No BB device updates available...what do I do now as just have an exspensive brick????? thanks

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB30100 "JVM 200" appears on the BlackBerry smartphone
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
You also might want to do an OS reload. The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

1. Make sure software is up to date
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo

When i try to update an app it says unable to download at this time. No matter how many time i do it. But then i tried to delete an app then redownload it to see if it will let me but i cant download it either it has the same error! HELP!!!

When i try to update an app it says unable to download at this time. No matter how many time i do it. But then i tried to delete an app then redownload it to see if it will let me but i cant download it either it has the same error! HELP!!!

Rebooting will not make you lose any content. Rebooting is when you hold the home button and the sleep button down at the same time until the Apple logo appears on the screen.
You can these suggestions. One might work for you.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.

When i try to download apps from the app store it gives me an error message help!!

when i try to download apps from the app store it gives me an error message help!!

Well this is my first time using the support community so I didn't know how it worked. It was giving me the error message 1004. I figured it out though thanks.

App error 205 reset- NEED HELP

Hi, so I have a Blackberry Cuve 8900. I was downloading something and than my usb connection accidently resetted on my laptop portable. I then unplugged my usb cable from my laptop while it is updating. Then I get this screen saying, "APP ERROR 205 Reset". What do I do?
Solved!
Go to Solution.

Try this first, before anything more complicated:
See the link below, for the download and simple installation instructions.
First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

App error 200 reset??? help me

Hi,
Can anyone help?
I was doing a update but then accidently unppluged the phone so my blackberry torch started to reboot, it took a while then white screen App error 200 reset shows up i push it and then it trys to reboot again but same app error 200 reset over and over again. how can this be fixed?

Try the method above, which circumvents Desktop Manager. If that doesn't work, post back and we'll try some other things. In fact, go ahead and download an app to your PC called BBSAK, which you get here: www.bbsak.org
Once the app is installed, connect your device to the PC, then launch BBSAK. You'll be asked for a password. If you don't have a password set for your device, just click OK.
Your device should hopefully be recognized by BBSAK, in which case, choose the Wipe Device option. This will wipe the OS from your device, allowing you to do a fresh install using the instructions above.
*** If I've been helpful please consider clicking the LIKE BUTTON beneath my post.
*** Please remember to mark your thread as "Resolved" by clicking on OPTIONS to the right of the post and selecting "Accepted Solution."

Orignaly App error 606...help

Similar Messages

Maybe you are looking for