Orrarp report toll in appliaction 10g wants the solution for 11g

Dear all,
my orrarp reporting tool which will prompt me to select the printer from network was working fine with me on application server 10g when I moved to 11g middle ware this is not working as i am not getting printer window to select the printer on the network kindly help to configure and reolve my issue.
Thanks
Massi

Hi There,
No, I did not find any solution. However I managed to convert these into 11g from the only opportunity I got. I will explain....
On one instance, I managed to open up a report (which was crashing earlier) successfully in the 11g reports builder. As soon as I managed to do that, I opened up all the 10g reports that were crashing before and all of them opened up in the same report builder session and I saved it. Once all of these were converted, I took the back up of those reports. I then tried the same thing by opening another report builder session to see if the problem no longer exists, but I was not able to open these again. But lucky me, I took oppurtunity of the only chance I got and I managed to convert all the reports in the same report builder session when I managed to open one report successfully.
I thought that there must be something within the temp folder it is storing some information or something within the temp folder it is corrupting something, hence I cleared off everything from the temp folder and tried the same steps but in vain.
No one seems to know the solution so far. If you do happen to know the root cause please let me know.
Regards
Sanjiv

Similar Messages

Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I

Hello please I want the solution I have in my iTunes I own $ 112 and you purchase from the game of war gold price of gold and 99.99 discount iTunes money did not come in the gold game of war and that I am two days ago, I did not find the solution please I want the solution quickly

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

TS4185 I have a I Mac in my office & a mac lap top at home. Now I have the same e-mail address. I want the Facetime for my mac at home. 10.5.8 how can I get it?

I have a I Mac in my office & a mac lap top at home. Now I have the same e-mail address. I want the Facetime for my mac at home. 10.5.8 how can I get it?

Addition to above...
I need this on iCloud. anyone know where to find it?

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

Dont want the posting for mandotory condition type

Hi,
i have make pr00 mandatory but not assign any accounting keys to it as i dont want the posting for that price but at sales order creation it is asking for G/L numeber and giving the error.
please help me on this hwo i can remove this rpoblem as i dont want to hit g/l posting but also dont want to make condition type statical.
Thanks,

Monty,
During sales order, if you are getting a message to maintain a GL account, it may not be related to the condition type. It may be related to some other account assignment features also.
If you have maintained a condition type as mandatory and have not maintained an account key, it is fair. Such a configuration is acceptable and it will not post to GL account.
So, the message you are getting is related to something else, please post the verbatim of the message in the forum.
Also check if you have some functionalities like project in SD process, cost or profit centers, third party sales transaction etc during which this error has come.

I just want the download for vzw...i deleted it because coming up with error i would like to reinstall the vzw mobile app

i just want the download for vzw...i deleted it because coming up with error i would like to reinstall the vzw mobile app

Go to app store and search my Verizon and download

I bought an SD TV Show for $1.99 and I really wanted the HDMI for $2.99, how can I get this without extra cost?

I bought an SD TV Show for $1.99 and I really wanted the HDMI for $2.99, how can I get this without extra cost?

1 and 2: Please get the iPhone iOS 4 user guide.
3. Yes.

Is RoboHelp Server the solution for us?

Hi all,
I'm trying to figure out whether RH Server is the solution for us. I've seen a few similar posts in the forums, but none that really answer my specific questions. I'm hoping for feedback from someone with experience in RH Server, who is perhaps in a similar situation to us.
We are a software development company, creating desktop software for PCs. We have three main applications, and approximately 20,000 users. I am the company's (only) Tech Writer.
Currently I provide documentation (user guides) to our clients in the form of the good ol' CHM file. I develop these in RH8. Each of our applications is bundled with an installed CHM file which users access by pressing F1. I'm sure you're all familiar with this process. Our users run our software on their own systems, completely independent of us - there's no connection to us whatsoever. However, they all have Internet access, as it's a requirement for them to be able to use certain functionality within our applications. Hold that thought.
I also write Knowledge Base Articles in MS Word, as PDFs, which users access via our web site. Internal to our organisation, I provide KBAs and other such material for our Technical Support staff. These aren't available/accessible to the public. I write these in Word because they need to be sent around to a team of reviewers from time-to-time, and whilstI'm the only person with RH installed, everyone has Word.
What I'm hoping to achieve with RH Server is this:
Do away with the old CHM files that our users have. They're just awful. I'm hoping that in future, when our users press F1 from within our applications, they will be taken to a corresponding page on a web site or AIR page similar to what the Adobe Help looks like when we access it from RoboHelp. Forgive my ignorance if I've used incorrect terminology. That way they'll always be reading the latest Help content, live, online, instead of what I wrote last time we sent a product update out. I imagine our programmers will have to edit the functionality behind the action of our users pressing F1 in our applications. Has anyone done this? Are there any issues we should be aware of? What happens if our users don't currently have Internet access, for example - is it possible to call a local version of the Help instead, if this is detected? Has anyone done this with a similar number of users to us? We could well have 100s of users trying to access the system simultaneously.
Gather feedback from users. From what I understand, we'll be able to use RH Server to see which Help topic/content is being viewed, and also receive feedback from users. Can anyone give me feedback on their experiences with this? Any tips/hints/issues I need to be aware of? Is it possible for us to determine which users accessed which content? Remember, the idea is that users should be able to access this content by pressing F1 - I don't want them to have to sign in every time they need to access our Help system - it should be seamless to them. So, I'm wondering how it would be possible to track user usage without making them sign in. This is important to us because some of our content is region-specific, and it would be handy to know if users from those regions are actually accessing the Help content that relates to them.
Host our internal documentation on the same server as our public documentation. Is it possible to host all of our internal, private documentation on the same RH Server, making it available to our Tech Support team (and other internal teams) only? I imagine we could do this by password-protecting it, but I want to ensure that the public don't even know it exists. ...and our Tech Support people would not be impressed with having to sign in every time they wanted to access their Knowledge Base. Any tips here regarding locking down / restricting access to content?
A quick note about collaboration:
Currently, although the Help menus are developed in RH, the KBAs and other PDF documents are written in MS Word. I send them around to a team of reviewers who add their comments/edits and send them back to me. From what I understand, this is something I can do with RH10 - export PDFs and send them around for review, combining the results later, at which time I give them a final review before publishing. Have I understood this correctly? Does RH Server play a part in this process? Can I use RH Server's feedback capabilities as a mechanism for my review team to make edits/comments? I guess I'm trying to get an understanding of how sophisticated the RH Server feedback system is. If I can use RH Server to have the team read/review documents, it'll save me having to manage a bunch of Word documents that I email them. It'll also minimise the chance that a redundant document gets distributed by mistake - something that can occur because people use their locally-saved documents I emailed them earlier, instead of the finals.
Thank you.

Hi, symmetricalMan
Let's see if I can tackle some of these "inline". There are a lot of moving parts to your system (you're a busy guy!)
I only have time for a few of these. Perhaps Colum McAndrew and others will chime it with their experiences.
>>they will be taken to a corresponding page on a web site or AIR page similar to what the Adobe Help looks like when we access it from RoboHelp.
It would be WebHelp Pro in the scenario you mention (not AIR Help).
By "taken to a corresponding page" you are referring to Context Sensitive Help which RoboHelp Server does support (including your F1 scenario).
>>What happens if our users don't currently have Internet access, for example - is it possible to call a local version of the Help instead, if this is detected?
Hmm. You could either package a plain WebHelp (not Pro) output and distribute for access on a share drive. The detection thing would be up to your developers. Come to think of it, AIR Help does have a potential alternative here which might be worth looking into. Obviously, there would be two systems to maintain. I'm not up to date on it, but you'll find info here in the online help: http://help.adobe.com/en_US/robohelp/robohtml/WS81F63111-6ACF-4a02-B2B2-461FEBFA8093.html
>>.we'll be able to use RH Server to see which Help topic/content is being viewed, and also receive feedback from users.
Actually, the "feedback" is anonymous (no names are collected.) You can however, create "Areas" and analyze the traffic on topics according to sub-sets of your users.
The feedback is not direct from the users. In other words, RoboHelp Server (at least for now) does not support Commenting (as AIR Help does). So Feedback Reports are derived from the end-users "surfing" your site and collecting their search terms verbatim to get an idea of what they are searching for in order to improve your content.
>>So, I'm wondering how it would be possible to track user usage without making them sign in.
RH Server Sites do not have to be "Protected" by authentication. It is your choice. You can have some sites (called Areas) that are authenticated and some sites that are not authenticated, all on the same RH Server. RoboHelp Server uses a database and can authenticate users (by setting up protected "Areas".) However, my networking knowledge is limited and you would have to ask someone else about "persistent logins" etc.
>>content is region-specific, and it would be handy to know if users from those regions are actually accessing the Help content that relates to them.
Yes, you can do this. This is where RoboHelp Server can be used to create "Areas" for different content to be delivered to different audiences.
>>Is it possible to host all of our internal, private documentation on the same RH Server,
Yes you can. However the Tech Support sign in scenario question would have to be answered by someone else. It's hard to know from where I sit.
>>RH10 - export PDFs and send them around for review, combining the results later, at which time I give them a final review before publishing
Yes, this workflow would seem to work for you. However, RoboHelp Server plays no role in this review one way or the other. There are many alternatives for sharing the PDF which is described in the documentation.
See #6 on this page:
http://help.adobe.com/en_US/robohelp/robohtml/WS1b49059a33f77726-2db1c75912bc47baaf8-7ffb. html
You should also download the Adobe RoboHelp Server Reviewer's Guide which also has videos embedded.
http://www.adobe.com/support/documentation/en/robohelp/9/AdobeRoboHelpServer9_ReviewersGui de.pdf
Hope this helps
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com
Twitter: @hypertexas

Is JMS the solution for me?

I don't know very much about JMS so I would like to ask everyone whether I am on the right track.
The application I am trying to build is a multiple client/single server app.
The communication between the client and the server (going both ways) needs to be as close to real time as possible, and the messages from the server will be going to all of the clients at the same time.
I can't have the server create a message list and the clients read it when they want.
I would also like to be able to pass objects back and forth.
Is JMS the solution for me.
If not can someone recommend something better.
Thanks

Any type of communication can be close to real time whether you use sockets, RMI, CORBA, SOAP and JMS.
I would expect JMS to be slower than other techniques since it utilizes a middle layer, which others may not need. and SOAP which uses a verbose XML protocol.
The distinct advantage of JMS in your scenario is that you can broadcast your message to multiple clients very easily using the publish/subscribe method.
The disadvantage perhjaps is the reverse client to server communication. It is completely workable but will be less real-time than other solutions. The others solutions are are really geared towards client communicating to the server. JMS is geared to the server publishing to the client.
Im not sure what you want. If your client to server communication is simply to request different messages then JMS is the way to go. You can use message filters, called selectors. and that is very standard JMS.
If it is some other request, then it will be more complicated.
GLuck

Where can I download the agent for 11g database for 10.2.0.4 grid control?

where can I download the agent for 11g database for 10.2.0.4 grid control? i can't find the link.

I don't think there is one yet, but you can use Grid Control 10gR4 to monitor a 11g database. Please refer the certification matrix in Note 412431.1 Oracle Enterprise Manager 10g Grid Control Checker

I have my Adobe ID and the Adobe Digital Editions. But when I download an EPUB-ebook, I don´t see the ebook or "My Digital Editions-Bibliothek".What is the solution for this problem?

@I have my Adobe ID and the Adobe Digital Editions. But when I download an EPUB-ebook, I don´t see the ebook or "My Digital Editions-Bibliothek".What is the solution for this problem?

how can we solve the problem?
I have my adob.e ID, downloaded Adobe Digital Editions.
Whren I download EPUB-ebooks and want to use
Digital Editions, nothing happens and appears!??
Please give me a short feedback and help

Pls give me the solution for this requirement

Hi experts ,
pls give me the solution for this requirement
what we have to do when basis guys are tranported my object to the production without completting . how can we rectiify this .
thanks in advance

Hi
After Transporting a request or released a request you cant do any thing in that so now you have to create a new Transport request for your report continue with that. After completion transport it . It will makes no difference it will just over write already existing report
Reward alll helpfull answers
Regards
Pavan

TS1702 I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just give me a blank page.!!!! what is the solution for this.!!!!

I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!

Cc2528 wrote:
The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
but I would be more inclined to to the factory reset and start afresh.

Why doesn't my iPhone 4 have an 'Internet tethering' options? Is it carrier related or iOs related? Please help me find the solution for this. thanx

Why doesn't my iPhone 4 have an 'Internet tethering' options? Is it carrier related or iOs related? Please help me find the solution for this. thanx

Personal Hot spot
http://support.apple.com/kb/HT3574
Understanding
http://support.apple.com/kb/HT4517
Trouble Shooting
http://support.apple.com/kb/TS2756

Is iwork the solution for uploading spreadsheets from a PC to view on a ipad?

Is iwork the solution for uploading spreadsheets from a PC to view on a ipad?

So do you think any one at apple can answer this question, instead of having to check out there in the world to see if someone has accidentally figured it out?

Orrarp report toll in appliaction 10g wants the solution for 11g

Similar Messages

Maybe you are looking for