OS 10.0.10.672
Any deas if when Vodafone UK plan to release an update?
yasserhy wrote:
I am here in the UAE, how can I get the update?
Before when the carrier didn't release the update we used to go to BlackBerry and download the software nd install it using desktop manager. How can we do this now? Link is already messed up and not working for even backing up the phone
Plz tell me there is home for update
Hello,
Please refer:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/How-to-update-other-carrier-...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Satellite A60-672 hangs and will not boot up properly
Hi,
I have a Toshiba Laptop A60-672 it had been running slow but now when I turn the laptop it goes straight into the option screen where I choose safe mode or last known good configuration, every option I choose goes into the windows screen as if xp is loading up the blue bar runs across the bottom of the screen then you get a quick click of a blue screen then it reboots back to the screen of safe mode and last know good config ??
Can anyone advise me
Thanks and RegardsHi
The same happens on my brothers notebook because the files and sectors on the HDD were corrupted. This is happened after trying changing the partitions size.
I have booted from the original Microsoft Windows booting CD and went to the reparation console. I think you have to press the R to start the reparation in the Windows setup.
Then in the reparation console I have used the chkdsk /r option to solve this problem.
And I was successful try it! -
ABAP Email Sending error - MSG 672 - No entry in queue yet
I am trying to send mail by using function module
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
OPERATION_NO_AUTHORIZATION = 4
OTHERS = 99.
and running the program rsconn01 also
but in SOST its giving message MSG 672 - No entry in queue yet.
Mail has not sent to recipent. any solutions?
Regards
RajanbabuHello,
Please check SCOT setting.
Following will help you in case of SCOT setting are not done.
Do this and chk notes
Note 129950 - Required Customizing for use of SAP connect
Note 957412 - Troubleshooting automatic email transmission in SAP Solution
Set-Up SAPconnect
Use
E-mails sent from an SAP application are first sent to a queue. The queued e-mails are subsequently sent by a periodic background job.
Therefore, for automatic e-mailing you need to:
u2022 set up SAPconnect
u2022 set up a periodic job for SAPconnect
This IMG activity is a prerequisite for the following scenarios:
u2022 Testing
u2022 Monitoring
Activities
Setup SAPConnect
1. In transaction SAPconnect: Administration (SCOT) choose View -> System status.
2. Choose Settings -> Default Domain.
3. Specify your default domain and confirm. For example, "mydomain.com".
4. In the Administration screen, double-click the SMTP node.
5. Check the box "node in use".
6. Specify the mail host for SMTP. For example, "mail.mydomain.com".
7. Specify a mail port. The default port is 25.
8. Choose "Set" (for "Internet").
9. Enter an asterisk (*) for "address area".
10. Choose Continue.
Schedule the periodic background job to send queued e-mails
11. Call transaction SCOT.
12. Choose View - Jobs.
The SAPconnect Job Administration screen is displayed.
13. Choose Job - Create.
A dialog box is displayed.
14. Specify a job name.
15. Confirm.
16. In the next window, select the variant SAP&CONNECTALL.
17. Choose Schedule job.
18. Choose Schedule Periodically.
A dialog box is displayed.
19. Specify a time period.
For example, 10 minutes.
20. Choose Create.
Regards,
Sameer
Edited by: Sameer on Mar 13, 2009 12:30 AM -
Revision: 1098
Author: [email protected]
Date: 2008-04-03 14:50:39 -0700 (Thu, 03 Apr 2008)
Log Message:
Merge 3.0.x -- 362:394, 427:429, 603:608, 644:645, 651:663, 672:676, 755:756, 763:766, 785:790, 812:814, 854:861, 862:866, 866:933,971:1009, 1050:1056 --> trunk
Modified Paths:
flex/sdk/trunk/frameworks/build_framework.xml
flex/sdk/trunk/frameworks/projects/airframework/build.xml
flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/Window.as
flex/sdk/trunk/frameworks/projects/airframework/src/mx/managers/WindowedSystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/CursorBookmark.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/IList.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/IViewCursor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/ListCollectionView.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/XMLListCollection.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/ComboBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Label.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/Spacer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/TextArea.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/TextInput.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/VRule.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridDrag Proxy.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListItemDragProx y.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/ListItemRenderer .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/TileBase.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/listClasses/TileListItemRend erer.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/menuClasses/IMenuItemRendere r.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/DefaultDataDescr iptor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/treeClasses/ITreeDataDescrip tor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/videoClasses/CuePointManager .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/videoClasses/VideoError.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/ComponentDescriptor.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/CrossDomainRSLItem.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/IRepeaterClient.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectTargetFilter.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Tween.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/effectClasses/ParallelInstanc e.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/events/NumericStepperEvent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/events/ScrollEvent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/events/SliderEvent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/logging/LogLogger.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/BrowserManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/DragManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/FocusManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/IBrowserManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/ILayoutManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/LayoutManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/DownloadProgressBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/preloaders/Preloader.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/Locale.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/resources/ResourceManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/DescribeTypeCache.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/ObjectProxy.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/FlexClient.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MessageAgent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MessageResponder.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/SubscriptionInfo.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/channels/StreamingConnectionHandl er.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/errors/MessageSerializationError. as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/events/ChannelFaultEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/messages/HTTPRequestMessage.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/messages/SOAPMessage.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AsyncRequest.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AsyncToken.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/Fault.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/Responder.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/events/FaultEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/events/HeaderEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/events/WSDLLoadEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/HTTPService.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/mxml/HTTPService.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/remoting/RemoteObject.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/soap/AbstractWebService.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/soap/LoadEvent.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/xml/IXMLEncoder.asYou'd be better off putting those values in a real table, and don't know why you already didn't consider that.
I would do so for an IN list of more than 4 values, this would also save on maintenance.
You could still put those variables in a PL/SQL collection and CAST that collection to a TABLE type variable, to use that in your IN clause.
http://asktom.oracle.com has examples similar to that, search for 'Dynamic IN_list'
Sybrand Bakker
Senior Oracle DBA -
RE: Firmware v2.00.02 & Driver v1.672 Update dated 06/04/06 for Megaplayer 533 - Model MS5533.
I think that there is a possible problem with the above Driver & Firmware Versions as they do not seem to work for the Mega Player 533 - Model MS5533 ???. It renders the player inoperable (ie.Unable to turn player on at all) and also makes the 256MB flash drive unrecognisable to the computer (ie. computer asks for a disk to be inserted into the flash drive, similarly like the SD Expansion slot) .
All Steps to update the firmware were followed to the letter, including no battery, updating to the new version of the driver software v1.672, formatting the drive at the same time and pressing sustained "play" button.
Possible Fix : I was able to make the player operable again by reinstalling the original driver software & rolling back the firmware version back to v1.00.06 again (Try original firmware v1.00.02 if you haven't saved the v1.00.06 Firmware to your hard drive, as MSI does not have any longer the v1.00.06 firmware on their website to download anymore ). It now works as it did before :D(unfortunately still with the "ROCK" setting bug) .
NOTE: In order for computer to recognise the drive, Press sustained "Play" button when connecting to the computer, then please go to "start" (below left corner) and enter "programs" and choose "MSI MEGA PLAYER MS-5533" then "Download Firmware".
Computer should then recognise the player and allow for the firmware update .
My main concern is that many of MSI's other unsuspecting customers will download this particular software and experience the same problems as I did. They probably won't be able to figure out how to rectify this issue & therefore unfortunately be left with a player that does not work at all .
I have logged this problem now with MSI, but have yet to hear a response from them.
Has anyone else out there experienced this same problem or is it just me??? ???.
I searched this forum for any similar posts for this problem but found none.
If I am doing anything wrong to update firmware v 2.00.02, please let me know.
I did notice however that driver v1.672 software for MS5533 was called a "Megastick" and NOT a "Mega Player". Is this possibly the cause of the problem as it is the wrong driver for the MSI 533 Mega Player - Model MS5533 ???. Any help with this would be greatly appreciated.Quote from: Questioon on 06-July-06, 06:54:00
Hello,
Actually it is a long story including 2 other 533s which are fried (literally) during upgrade process.
Here are some of my experiences...
After completion of one of my upgrade attempts I inserted battery and get "usb power surge" message when plugged. That rendered the device inoperable with the battery. It was still recognizable by windows both as recovery and storage devices depending on pressing/not pressing start button before plugging.
To be sure I checked the usb voltage of my PC with a multimeter and it was about 4.5 volts on load. During my countless plugging unplugging attempts I accidentally noticed that if I connect USB cable sort of half way (like only dc power pins connected but data pins not) device was able to start as mp3 player. I mean original mega logo appeared and device was able to play mp3s as normal. Then I made a special usb cable to try to power it with 3 serially connected AAA cells (~4.5 volts total) via USB port. And surprise,... it was working. So for a couple of days I used it with that external battery pack. It was big and ugly though. And I gave it to a friend who likes customized! devices : ).
And here is what I did to install latest firmware into my second 533:
1) I deleted all file instances and registry traces of old 533 driver and downloader versions both automatically (by uninstaller) and manually (coz related sys file was still there, in system32\drivers folder and maybe also in driver backup after automatic uninstallation). Also maybe it is necessary to perform a complete search because despite I deleted the related sys, windows was able to install recovery device probably from its driver backup folder. I also deleted related oemxx.inf from \inf folder (be careful, don’t delete the wrong oemxx.inf ones belong to other devices). Because windows rename/recopy original *.inf into oemxx.inf.
2a) I put firmware files from zip into driver installation package's bin folder.
2b) Again I put firmware files from the zip into c:\program files\msi\... after installation (though this step is probably unnecessary)
3) I removed battery, pushed the button, plugged in, windows recognized it as recovery device, after about 5 seconds (not too long coz a device timeout occurs sometimes, and if this happens unplug and replug while still pressing the button) started software, now device was disappeared from hardware list momentarily and re-recognized as storage volume.
4) Here I get an error message like "operating system error..." It was impossible to use software with the device recognized as "recovery device". I unplugged and re-plugged now without pressing the button, device was recognized as usb storage volume and I started the software and upgraded the firmware. Device was inoperable...
5) Repeated the process, now with pressing the button. I upgraded the firmware. And everything was OK. Rock EQ fault was gone. A playlist function is added, hough I dunno how to use this as yet : ) When I go into playlist option I’m unable to exit, and only way I found to exit is turnoff. Except this detail it works properly.
My computer is a standard Dell latitude c600 (an old model with one USB-1 port only), with windows xp spII. Device chip is stmp3502 according to latest driver but it was a stmp3500 according to driver on the cd came with the device.
Hope this helps,
Best regards.
PS: Despite the whole adventure I really like this device, its plain design, SD card feature, removeable battery, and especially its stmp35xx chip, also used in ipod shuffles which is regarded as best sounding ipod model, by some people.
PS 2: Maybe this is known to everyone, but I just noticed that it is possible to play non-compressed wav files with maga player 533 (16 bit 44.1 khz stereo PCM files). All you have to do is copying them into "voice" folder of the device. Then you have CD quality audio. I dont know whether it is possible with older firmwares too, or just a feature of latest one. I also tried higher quality formats like 24 bit 48 khz but device couldnt see these ones
anyone tried this procedure? did it work?didn't work for me.. -
Workflow - waiting for the communication Service - Msg 672
Hi,
We are facing problem in a program, which triggers mail through a workflow.
when the notification is rejected it calls an workflow
and when the notification is approved it calls an workflow
in the 2nd case.. when the notification is approved the mail is not getting delivered to the user.
in SOST we found that it is showing the satus sent.. with the Msg 672 ( waiting for communication services)
can anyone guide.. what may be wrong .. or where to check it and solve this issue
Thanks
am sHi,
You can use the program lines..
*** These two statemnets are used to force the mail to send it to the
*receipeint otherwise we need to go to SOST tcode where we need to press
* F8 to send the mail to the other user. To avoid this we need to use
*these two statemnets. Here the mail is not in queue.
submit rsconn01 using selection-set 'INT' and return.
call function 'SO_DEQUEUE_UPDATE_LOCKS'.
* SUBMIT rsconn01 WITH mode = 'INT'
* WITH output = 'X'
* AND RETURN.
But since you care sending the mail through a workflow and not programatically,
Copy the standard BO, SELFITEM in which you can add the above two commands in the SENDTASKDESCRIPTION method.
Create a standard task in PFTC binding the z BO and give this task in your mail step which will force the mail to your inbox.
Regards
Indu -
VS Load Test : Unable to execute a 672 hour load test
Hi Team,
We keep running endurance tests for a very long time and today we tried to run a 28 day test (672 hours). However below ERROR keeps coming and we can not proceed with load test.
Error occurred running test. Could not run load test <loadtestname> on agent <agentname>. Number must be either non negative and less than or equal to Int32.MaxValue or -1.
Parameter Name : millisecondsTimout
However, we are able to run a 590 hours load test. but problem is seen only we go around 600 something duration.
Other Details:
VS Version : 2012
Rig Setup ? : No
Run Type : Local Run
Please let me know if you need any more details
Thanks and Regards,
GauravHi Gaurav,
According to your description, please you share me the load test error log.
In addition, I suggest you try to create a yourself testsetting file and then add more time and then call the testsetting file run the load test check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Problems with grahic card on my Satellite A60-672
I have a Satellite A60-672 which has graphics by ATI. On a number of occasions on start up it has crashed and the online crash system says everytime that it is ATI technologies. I have emailed ATI and they said it is nothing to do with them.
I have tried to email toshiba but none of the address work. The crash system tells me to uninstall the software but seeing as I didnt put it on, i am wary about doing this as it might muck up the operation of my laptop.
Currently my laptop works fine with this continuous problem. Has this happened to anyone else or does any one know how to contact toshiba.
ThanksHi,
here is a url where you could choose your country. Then you have to choose PC systems, after a new site is shown and there is on the left side a telephone number from the Toshiba infoline. They could say you the country specific number for the Toshiba Support hotline!
http://www.toshiba.co.jp/worldwide/europe.html
Bye and a happy new year!
TOK -
Hi Experts,
I facing the error message 672 - 'Still no entry in queue' when iam using the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for HR developement. This FM is written in form..endform which triggered dynamically ( dynamic actions ) when a infotype is created. done.
CLEAR ls_objpack-transf_bin.
ls_objpack-head_start = 1.
ls_objpack-head_num = 0.
ls_objpack-body_start = 1.
ls_objpack-body_num = lv_tab_lines.
ls_objpack-doc_type = 'RAW'.
APPEND ls_objpack TO lt_objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = lv_doc
put_in_outbox = gc_checked
commit_work = gc_checked
TABLES
packing_list = lt_objpack
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
DOCUMENT_TYPE_NOT_EXIST = 3
operation_no_authorization = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 99.
Please guide me to slove this issueHello Kumar,
Actually I have met with the same issue as you before, we have raised a ticket to related component, and the colleague replies as:
the status 'no entry in queue yet' indicates that there has been no
COMMIT WORK at all aftr you have send the document; or the COMMIT
WORK was executed in a context where it is not active, eg. within
a 'call dialog', within an event handling, perform on commit or update
task.
Without COMMIT WORK the send request is not made persistent and there-
fore is not shown in the send queue.
The same problem might occur if the workflow is handling CRM objects
before sending and thus activate the object pool (class CL_OBJECT_POOL)
I am not sure whether this is exactly the reason of your issue. You can also refer to SAP note 1041227 and 1045925. Hope it helps you.
Best Regards,
Jerry -
Event 672 audit failure after migration to hosted Exchange
I recently migrated a company to hosted Exchange. They had been previously using in-house Exchange 2003 (on SBS 2003). Exchange has been removed form the server and the 2003 SBS server is still running as the DC.
Right after the migration the server began to recieve Error 672 failure audits, 1000s per day.
I suspect these can be safely ignored, but is there a way to stop them as they show up on daily security reports.
-Ken
Event Type: Failure Audit
Event Source: Security
Event Category: Account Logon
Event ID: 672
Date: 11/24/2014
Time: 10:11:40 AM
User: NT AUTHORITY\SYSTEM
Computer: BUZZ
Description:
Authentication Ticket Request:
User Name: user@hosted Exchange.lan
Supplied Realm Name: COMPANY.LOCAL
User ID: -
Service Name: krbtgt/COMPANY.LOCAL
Ticket Options: 0x40810010
Result Code: 0x6
Ticket Encryption Type: -
Pre-Authentication Type: -
Client Address: 192.168.x.x
Certificate Issuer Name:
Certificate Serial Number:
Certificate Thumbprint:Hi Ken,
I suspect these can be safely ignored, but is there a way to stop them as they show up on daily security reports.
We can stop audit failure events from being logged in Event Viewer by editing audit policy. More specifically, we can set the Group Policy setting
Audit logon events to not to audit logon failure
(uncheck the Failure checkbox), here is a screenshot below:
Best Regards,
Amy -
I am looking to make my Toshiba Satelite SA60-672 laptop wireless for the internet and stuff, but I dont know which card to choose (PCIMIA or mini card or something) and from reading another post theres meant to be a button on the right that you can move to turn on and off, well you can see where its meant to be, but you cant move it :S
Can anyone help me??
Thank you
BenjiHi again Benji
I didnt try it because I use mini card in my notebook but some friends of mine have PCMCIA wireless cards. One of them has Conceptronic Wireless 54Mbps PC Card and another one has Netgear WG511 Wireless PCMCIA Card 54Mbit 802.11g. Both of them work properly.
Pick up some information and ask some experts in electronic store which one will be good for your notebook.
Good luck! -
Hi All,
I m using open_form and close_form to send FAX.
My problem is , after executing program i got 672 status in SOST. Ideally it should be 710. I tried "Commit Work" after close_form but not working. Even my basis team confirms that settings are correct. I m using MySAP 2004 system. I think i m missing to fill some fields of structure ITCPP. Any idea?
Pls help me.Hi Ravi,
Thanks for response.
Actually FM CLOSE_FORM returns structure ITCPP and then i pass this structure to subroutine otf_open_spool(LSTXCOTF) to create spool. Do i need to update ITCPP before passing it to LSTXCOTF
Basically i m upgrading my system from 4.5 to mysap ERP2004 . so to accomodate SAPCONNECT, i m creating spool. But then also my SOST status is 672 only. I want it to be 710.
Regards,
Dharmesh -
New Edge Device (672) Addition in Existing Infra.
Hi All.
I have WAAS infra running with CM-612 and Edge-512 running on WCCP v2.
I want to add one more device for a location in existing infra of WAAS.Need steps to add this new device what configuration will be required.
Another question i have i added so many users with admin rights but when i give show run command on CM i am not able to see all of them.
I also want to know show run and show start only shows me some configuration like tacacs ,interface,mode of device and local user DB.
how to take backup of whatever the configuration is on WAAS box like profile in case if it dies how to restore in working condition.
Thanks in Advance for Help.
AjayHi Ajay,
If you want to add one more wae device for wccp redirection,following documentation links will assist answer the question.In short its the same set of steps that you did to configure wccp for your edge device
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/traffic.html#wp1041613
To view user accounts from CM click on My WAN > Manage Devices and click the Edit icon next to the device for which you want to view users. Then click Device Users or CM Users, depending on whether the device is an application accelerator or a Central Manager. The Users for device window displays all the user accounts defined for the device.
If the the above CM gui is showing you the users then even the cli should show the same users.When you type sh run | i username command you should see all the the users that you see on the CM gui under the CM device CM users.
More information on user accounts you can get from
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/usrmgmt.html#wp1042548
One the CM wae device in the gui and cli you should see all the users created from MY WAN--Admin---AAA---Users section.On the Application Accelerators wae's you will only see the users that have roles assigned to them.
Following link explains the Back-up procedure for CM and wae devices
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v431/configuration/guide/maint.html#wp1113704
Hope the above information helps
Regards
-Smita -
This is so painful.
I keep on marking my emails as read and they reappear 10 seconds later.
Is there a fix.
If not I'm off to HTCsuppose it depend on the carrier really never had anything like you describe with
hotmail as exchange
gmail as imap
aol as imap
yahoo as imap
all setup on the phone as just setting the phone to sync
from outlook or osx mail program or the likes don't really work as mails should
about the ultimatum to apple about fixing your mail problems then you will likely have more luck in the feedback channel then here were we're just users like you
http://www.apple.com/feedback/iphone.html -
I have an HP G72 notebook with a broken left hinge. It is out of warranty. Can this hinge be replaced? Thank you.
05/07/14 - Jeff reached out to customer
I work for HP
Maybe you are looking for
-
Hi I have a WM system with stocks inclusing of HUs because one of my WM managed storage location is also HU managed. Now, I have converted WM storage locations to EWM and removed HU management indicators were earlier HU managed and completed all nece
-
Problem about the macro in word using ole
Hi, Now i have an urgent problem. I want to use ole2_object to control a word document by calling the macro. i want to pass a parameter for the marco but i don't know how to pass it . the main method i use as following: macro = 'startmerg
-
hi, I would like to know how to change the work item language(in inbox the work item subject should come in the language in which a person logs in to the system)say if a person logs in french the work item subject in inbox should come in french.lik
-
Problem while importing files in premiere CS 5.5
Hi, We tried to import a 25 minutes video file (format Quicktime, codec H.264) in premiere CS 5.5. The process stops after importing just a couple images (between 2 and 100). The same happend with other files formate. Do anyone have an idea where the
-
How to i go directly to my inbox in windows live mail using firefox
Nothing more than what I've already said. I want to go directly to inbox in windows live mail (my account is actually Hotmail.com) if that makes a difference. I've tried what others have but they have used IE and the options are there from there sill