OS 10.10 how to hide/show a folder with a password using terminal

In Yosemite 10.10.2 Terminal Can you please tell me how to hide/show with a password then show again on already existing folder created on a system drive and also an external drive. Please provide the path text to folder name "wbfiles". Thank you Winwoodb

You can drag it from one place on a drive to another.  If you are moving it from one drive to another then it copies it.  If you are moving it on the same drive and are getting that message then not being able to move the folder is the least of your problems.  Free up space immediately because your computer is about to crash and probably lose files.  Then you'll have lots of space.

Similar Messages

  • How can i protect a folder with a password so everytime i want to open it it requires my password?

    how can i protect a folder or application in iPad  with a password so everytime i want to open it it requires my password?

    No way to do so at this time.

  • How to hide/show reports region with radio group selections

    Hi, I have an HTML region with a radio group of two choices (Rpt1 and Rpt2). Also got two other report regions which depend on the radio group selections and by pressing a button it will display records.
    Everything does work perfect BUT say I select Rpt1 and press the report button it will show the records and after that if I select the Rpt2 radio button I still see the result of Rpt1 records. How can I clear or hide the reports regions when I change my radio button selection?
    Thank you
    -iahmadi

    Hi,
    You can create HTML regions that do not need to contain anything at all (use the "No Template" region template to ensure that you don't see a region Title on the page).
    However, in order to get this region to be displayed until the Report button is clicked, you would need to have a hidden page item (called, say, P1_SHOW_REPORT) that has, as a default, 0 as a value. The branch that is triggered by the Report button would then set this item to 1 - so, 0 = hide and 1 = show
    On your page you should have a branch that is conditional on the Report button being clicked. On this branch, set the first "Set these items" to P1_SHOW_REPORT and "With these values" to *1*. You should also have a branch on the page that is unconditional - meaning that it can be triggered by anything that submits the page. Firstly, this branch should have a high Sequence Number (say, 99) and secondly, should should set the value of P1_SHOW_REPORT to *0*. So the Report button sets it to 1 and anything else (which will include the radio button selections) will reset it to 0.
    Now, on your regions you have to change the conditions slightly as we now have two conditions to check - which report has been selected and whether or not the Report button has been clicked.
    This can be done by using a SQL Exists condition of something like:
    SELECT 1 FROM DUAL WHERE :P1_SHOW_REPORT = 1 AND :P1_RADIO = 'ABC'(where ABC is the value for the radio button for the report
    The "blank" region would also have a condition - that would be a simple Item = Expression 1 condition of P1_SHOW_REPORT = 0
    Andy

  • How to login as a user with EMPTY password in terminal?

    hi there
    i have created a standard user account without a password.
    logging in works fine via GUI (login window). but i cannot login via the login-command in terminal (shell).
    how can i do this?
    thanks, olli

    Interesting. I found a way. First log in as an administrator. Then become root by entering sudo -s. Then, instead of using login, use su username to log in to your passwordless account.
    Perhaps somebody knows of a less cumbersome way and will post it.

  • How do i lock one folder with a password? just one folder individually.

    thanks

    The Finder does not let you revoke both read and write permission from yourself, but you can revoke read permission from the GUI. Otherwise you have to use Terminal.
    Get Info on your folder
    Under sharing and permissions change privilege to "No Access" for Group & Everyone (probably labeled "Staff" & "Everyone"). Change the permission to Write Only for "Me".
    Click the lock to prevent changes.
    Now nobody can view the contents of that folder without your account password.
    To open the folder get info again, click the lock in the lower right corner, enter your password then change the "Me" permission to Read & Write.

  • How to Hide/show the columns data while doing Drill down or drill up

    Hi ,
    How to Hide/show the columns data while doing Drill down or drill up in webi report .
    Does it possible BO 3.1 version ?
    Please suggest me on this.
    Thanks & Regards
    Venkat

    While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
    So I have an alerter applied to every cell of the table.
    When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
    because its now empty and doesn't need to show, it wont.
    For the detail table I use the opposite, so when you drilled down it becomes visible...
    Hope this helps all that do not have 40 yet
    Good luck,
    Marianne

  • How to hide/show dashboards for user/groups

    Hi,
    Please help on how to hide/show dashboard menu/sub menu to users/groups based on their profile settings.
    thanks in advance.
    regards,
    kumar.

    Hi Jinu,
    1) Do some or all of those subreports span multiple pages?
    2) Do each of the Subreports start on a new page?
    If yes, for both, then here's what you need to do:
    1) Create a formula (@True) with this code:
    shared booleanvar SetStatus:= True
    2) Create another formula (@False) with this code:
    shared booleanvar SetStatus:= False
    Drag and drop the @True formula on the details sections for which you want the Page Footer to be suppressed.
    Similarly, drop the @False formula on the details sections for which you want the Page Footer to show up.
    Then, go to the Section Expert > Select Page Footer c > Click the formula button beside Suppress and use this code:
    shared booleanvar SetStatus;
    -Abhilash

  • How to hide/show chart at runtime

    Hi All,
    Can anyone help me in how to Hide/Show a chart at runtime.
    Thanks & Regards
    K.Srinivas

    Hi
    THere is simple way of doing it. Follow the steps below -
    1. Create 'Radio Button' in another form.
    2. Create 2 buttons in it e.g - 1=Show & 2=Hide.
    3. THen there is option as 'Visibility Condition' on Chart 'Properties'.
    4. Write condition as - IF('Form Tech name'@ST1=="1",true,false)
    here ST1 is tech name of the radio button you can select it in formula option.
    5. Then make 1 or 2 as default value.
    You can change radio button at run time & you can show or hide the chart.
    Let me know if you have any issue.
    Regards
    Sandeep

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

    how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

    Hi,
    This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
    Jamie

  • Mack G4 start up with just showing a folder with a ? mark and will not start

    HI I have a G4 Mac and have it for 2 weeks and I was updating software and it froze and on restart it just shows a folder with a ? mark what can I do I tried using the Control key + P+S or what ever and it did nothing.
    Please help so I don't go back to my PC it crashes every day that is whey I got the used G4 so Please anyone help Me.
    Thanks Erick

    When you zap PRAM like you did, or have trouble, two things:
    You lost the default path to the boot drive volume;
    Your boot drive needs to be repaired.
    Your better off with the PowerMac forum.
    G4s can't run 10.7 or 10.6. And 10.4.11 is the best OS for PowerMac G4.
    Mac Pro
    startup disk maintenance Disk Utility fsck
    Help_ Repairing startup disk
    Hard Drives Recovery

  • Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

    Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

    Cant we even use the dlls in an application?
    In order to automate Acrobat, you need to have Acrobat installed. There is
    nothing you can do with just the DLLs. As was already stated, Acrobat is
    not licensed for use on a server, but regardless of that, it's also
    not technically suitable for server use. You need to find a solution
    outside of Acrobat to solve your problem.
    It also seems that you don't have a good understanding of what is going in
    inside a PDF file. PDF is a very complex file format, and based on
    your questions
    and followup questions, you need to spend a considerable amount of time
    getting familiar with the PDF file format to understand how color works in
    the PDF context. Reader the PDF spec, while paying special attention to the
    section about color. You will find out that if you want to convert the
    color space of a "PDF file", you actually need to convert the color space
    associated with every single object in your PDF file. That is fairly simple
    for vector graphic and text, but when it comes to images, you may have to
    convert the image data. Once you have a good understanding of what it is
    you need to do within the PDF file, then you can start looking for tools
    that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
    not suitable for this task. If you want to stay with Adobe products take a
    serious look at the PDF Library, which his licensed through Datalogics (
    http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
    there are other, non-Adobe PDF libraries that you can also use, but this is
    the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
    You are wasting your time while looking for a simple solution that does not
    exist.

  • TS2094 After resetting the pram, the screen only shows a folder with a question mark inside.  What does this mean?

    I followed the initial steps in this post and reset pram.  After restarting, the screen just shows a folder with a question mark.  What does this mean?

    Thanks Niel, I tried using Option and nothing happened so I next tried inserting the Leopard disc and rebooting while holding C.  Nothing happened until the disc was ejected and then the folder with question mark reappeared.  I inserted the disc again and at this point and it booted OSX.  I tried to acess disc utility to repair but my harddrive wasn't listed, only the CD drive and the OS disc.  Does this mean I'm lost everything?

  • Anybody can help me? I'm trying to start my computer and it shows this question mark. Then i restart it holding the option key and it shows this padlock with a password field. What should password should i put?

    Anybody can help me? I'm trying to start my computer and it shows this question mark. Then i restart it holding the option key and it shows a padlock with a password field. What password should i put? I would appreciate any help

    Contact Apple, or if you bought the computer secondhand, the previous owner.
    (118258)

  • HT4085 how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.

    how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.

    You can set a passcode to be requied to unlock the iPad via Settings > General > Passcode Lock. In terms of locking the actual screen whilst using an app, then that isn't currently possible, but with iOS 6 in the Autumn there will be a new 'accessibility' feature (from here) which will allow you :
    ... to limit an iOS device to one app by disabling the Home button, as well as restrict touch input on certain areas of the screen

Maybe you are looking for