OS 10.2.1 upgrade and bluebooth issues

Since the recent upgrade the bluetooth connection to my car audio keeps falling out. Also when it reconnects the audio works but the data on the song, artist etc is not displayed on the car media screen. Has anyone else encountered this problem?

After upgrading to 10.2.1 and also upgrading Say It,I did experience some bluetooth problems. After removing the Say it app my BlueTooth connection started working properly. After about a week I reinstall Say It and my BlueTooth problem started immediately. I am currently operating my phone without Say It and my phone and bluetooth connections works great.
My wife and daughter have Z10s and my son has Z30. They do not use Say It and they have 10.2.1 There BlueTooth connections are working properly.

Similar Messages

Upgrade and internet issues

I recently installed Arch 64 and have been having a couple of issues:
1.When I installed it I connected to the internet and tried "pacman -Syu" to upgrade my system. The download went fine( although a little slow) but when it came to the installation it spit out some junk about files already being in the filesystem and at the end something about errors occurring and no packages being upgraded. I can't even install my video drivers because it needs some files to be upgraded.
2.At first I had internet just fine but now it wouldn't connect. I have a PPPoE (username+password) connection. Also, when booting it says "eth0 timed out". I had another computer before this one. I had installed Arch 32 and had everything setup properly. But this time I need a 64 bit edition due to rendering purposes.
Any help is welcome. Thanks.
By the way, I have kind of mixed up shifts so I may not be able to answer you right away.

Thanks. The link worked. I managed to install my video drivers as a test but I somehow broke the system. I'm with a fresh installation but eth0 still times out when booting. I shutdown the Wake-On-LAN (I read it somewhere) but it still doesn't help. Since I can't connect to the internet I can't ping anything. Sorry.
This is my MB: Gigabyte GA-EP45-DS3L - RTL8168C(P) PCI-E Gigabit Ethernet NIC
EDIT: I booted LinuxMint (32 bit edition) and the internet worked just fine. It's weird because they both use the rp-pppoe plug-in. Is it 64 bit related? Is it my MB related? Any assistance would be great.
Last edited by Narrator (2009-02-14 23:28:54)

RE1000: 1. Firmware upgrade and strange issues. 2. WPS 'on' despite being clearly disabled

1. WPS shows 'on' in the RE1000's web status page even though it shows disabled in the wireless security page!
2. The unit seemed to be acting up multiple times ("attempting to connect" or whatever the exact message is) in the middle of both the firmware upgrade to 1.0.01 and the subsequent firmware downgrade to 1.0.00
Luckily it did NOT get bricked!
It also at times would just stop responding or redirect to to the erouter page, despite clearly being in the RE1000 web admin pages and clicking wireless survery links etc.!
Bizarre!
It may be that it needed rebooting / resetting, but it happened during the first upgrade.
3. It also said 'authentication / authorization failed' when I attempted to manually connect to my AP in the 'Site Survey' screen. However, when I then go to 'WLAN statistics' it shows Status: Associated anyway.
Bizarre!
Has anyone else seen any of this?

Mort wrote:
What is the make and the model number of your router? The RE1000 is meant to extend the range of an 802.11n network. If attempting to extend the signal for a traditional 802.11g router you will not achieve the desired performance because it is not optimized to extend standard 802.11G signals.
So if you are using n-technology router I suggest you to reconfigure the RE1000..
Here is the link for the configuration of the RE1000
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=22045&userrole=Links...
Setting up your RE1000 using the setup CD
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=1165f7b9a6fe4904bd7bf82eea32be0b_Setting_up_your_R...
I am using Linksys's own E4200 which is their current top of the line consumer router (802.11n 300 Mbps on 2.4 GHz and 450 MBps on 5 GHz).
Thanks for the suggestion, but my RE1000 has been configured perfectly since the beginning.
I also do not have WPS enabled (although the one screen says it is while the other setup screen clearly shows it is off) and other than the flashing light (and strange behavior / bugs), it works nicely as far as the actual intended functionality is concerned.
I had the same flashing light issue with my E4200 router, which Cisco finally acknowledged was an issue on their end (which I was convinced all along given how many others had the same exact issue) and which they fixed in the latest E4200 firmware (1.0.03) - see release notes.
I suspect the RE1000 has a similar code defect (bug) that happens under a specific set of circumstances (which explains why not all owners are affected).
Hopefully they will address it soon.

SQL Server Express 2005 to 2014 upgrade and Uninstallation issues

We have client application running SQL Server Express that connects to a SQL Server 2012 server. We are attempting to upgrade from Microsoft SQL 2005 express to Microsoft SQL Server 2014
express – but are having difficulties – especially with uninstall.
Our understanding is that we needed to follow the following steps:
    First we install Microsoft SQL 2005 express SP4 as required silently
Start /wait SQLEXPR.exe /qn ACTION=UPGRADE INSTANCENAME="SQLEXPRESS" UPGRADE=SQL_Engine SAPWD=<password>
SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD= SECURITYMODE="SQL"
    Then try upgrading with Microsoft SQL Server 2014 express, we use following command to do it silently
SQLEXPR.exe /q /ACTION=upgrade /INSTANCENAME=SQLEXPRESS /ISSVCAccount="NT AUTHORITY\SYSTEM" /IACCEPTSQLSERVERLICENSETERMS
We see following
    In Control Panel -> Uninstall or change program, we have all the instances listed 2005, 2008, 2012 and 2014.
    How do we uninstall the instance? , We try uninstalling 2014
But it is not cleanly uninstalled.
Questions:
    Is there any way for clean upgrade from Microsoft SQL 2005 express SP3 to Microsoft SQL 2014 express?
    Is there any specific steps suggested to uninstall upgraded SQL 2014 express from system?
    Are we doing anything wrong in commands for silent upgrade?
Thanks in advance.

Hello,
After you perform an in-place upgrade it’s normal to find the binaries and references of the old version of SQL Server on the Start Menu and Control Panel -> Programs and Features. That’s by design. After you have successfully upgraded an instance, you can
remove the old binaries.
IfIf you find some remnants after uninstalling SQL Server 2014, please perform the following steps to manually uninstall it:
1. Uninstall all SQL Server 2014 components you can using Control Panel -> Programs and
Features
2. Backup the registry.
3. Delete the following keys in regedit:
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
    --HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete
all the sub-keys referencing SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing
SQL Server.
6. Rename all the SQL Server folders in the computer like
C:\Program Files\Microsoft SQL Server and subfolders.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

HPE430me graphics upgrade and cooling issues

Hello,
I have an HP Pavilion Elite 430me and wish to upgrade the installed Geforce 440 card to a Radeon 6870.
I have 4 questions:
1-Does the MS-7613 (Iona-GL8E) motherboard support PCIe 2.0 as it doesn't state it in the specifications page; it just says PCIe 16X? Bear in mind that it is an H57 based board.
2-Does the case allow space for the 10" graphics card?
3-Is the 460W PSU sufficient?
4-I live in Egypt and the temperatures here is quite hot during much of the year and the case only comes with a single 80mm fan; is overheating a possibility here considering that a Core i7 870 is also present? Is there any way to install another fan on this case?
Thanks
This question was solved.
View Solution.

AhmedHM wrote:
1-Pcie 2.0 is backward compatible. Therefore, it should work fine.
I know, but I don't want to bottleneck my system... I understand. Using a PCIe 2.0 card will not bottleneck your system.
2- I don't believe that this card will fit. I normally recommend staying under 9".
3-The HD Radeon 6870 requires a minimum of 500W.
Could you recommend a good card at this size and power limit? If you mean for a 500W PSU, I suggest upgrading to at least 550W if that is your plan. This will give you many more options for cards. I like Corsair and OCZ. Both of the PSU's in the links have 120mm fans. This will help with cooling the computer.
As for a card, this is more difficult. HP has their video cards made to their specs. Therefore, it is difficult to know which cards would perform better. However, I like XFX, BFG, EVGA, Sapphire and PNY in that order. Here is a card that should perform to your needs. This is based on a nVidia chip. Also, here is a card based on an AMD/ATI chip. Both cards are double profile (cover two slots). This means that one of the PCIe x1 slots will be covered. It is always a good idea to read as many of the customer reviews as possible. They will give you the straight scoop without manufacturer hype.
4-The AMD/ATI cards come with their Catalyst Control Center. This software suite allows you to control the fan speed of the card.
I meant the case: is the single 80mm fan sufficient, and if not, can I add more fans? I understand. Controlling the fan on the video card will help the entire computer. The majority of heat can be generated by the card.
If you have more questions let me know.
Thank you for the quick reply
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

1.1.4 upgrade and restore issue...

Phone working fine this AM. Came into work put phone in cradle and it indicated an upgrade is available. Well the exact same thing happened as happened with 1.1.3 upgrade. Phone crashed completely. Now attempting restore of phone and it is "stuck" at the "Preparing iPhone for restore..." dialogue box (now for the 4th time and for at least 20 minutes this time).
iTunes is the most current version as well as I have removed and reloaded iTunes twice now.
Normally iTunes works fine. Any suggestions as I really do not feel like or have the time to drive the 50 miles to my "local" Apple store?

I have almost exactly the same problem, although I get past the "prepare iPhone..." point and start the restore before I lock up. I did get a few hours use of the phone after the 1.1.4 upgrade (absolutely no problems with 1.1.3, I probably should have waited to upgrade) but after the 1.1.4 upgrade the iPod module was screwed up, not syncing many of my songs, show the wrong or blank album art in coverflow, and other glitches. Attempts to sync either failed with "Device Timed Out" (the iPhone would kill the connection in the middle of a sync) or finished without syncing (or sometimes removing) songs I had on the iPhone.
I tried to restore but am now locked in "Recovery Mode" each time I try to restore. I am trying to do this through iTunes on Windows at my office (the only machine I have always synced with, although I do have a Mac at home). Right now iTunes itself is frozen in the restore cycle and I think I will have to hard kill it to start again.

B1 2007B Upgrading and migrating issues

Hi,
Is there any issues faced with the upgrade of 2005B to 2007B version? ifso, what are they?
What are the things to be considered?
What are the advantages of 2007B?

Hi Vijay,
the 2007B version of SAP Business One is currently in Ramp-up.
For info on new features etc please have a look at the landing page:
Cannel Partner Portal -> Solutions -> SAP Business One -> Hot Topics
Of particular interest should be the new unified reconciliation engine & the implications thereof, please see the recanciliation landing page as well. There is a hyperlink in the hot topics section.
All the best,
kerstin

N91 WLAN (WiFi) and Bluetooth Issues.

Hi Everyone,
I am having some issues with my new N91. I recently had the firmware upgraded, and the issues have not improved at all. I'm hoping someone out there has faced and solved some similar issues, or perhaps that you can point me in the right direction towards finding a solution of my own.
WiFi (WLAN). Okay, the N91 comes with WiFi built in. I have been able to find networks, and browse the internet on my phone, in Infrastructure mode. It is pretty simple. The problem has to do with encryption.
On my home network, I use WPA encryption with TKIP. The N91 configuration screens give me the option of using WPA with TKIP, but the phone won't connect. I tried changing to WEP on my home network, and configuring the N91 to use that encryption instead, but it also did not work.
Since I use other computers on my network with WiFi, turning off encryption is not an option. I did test the phone and the router with encryption off, it connects.
The issue is, the N91 will only connect to un-encrypted networks. This is fine for free hotspots, but I want to sync with my home PC via WLAN, send email and use the phone via VOIP. I also need to connect to encrypted networks on the road.
Has anyone managed to connect to an encrypted network with an N91? Do you know what specific hardware you were connecting to, and what protocols you used?
The second issue is Bluetooth. I drive a 2006 BMW M3 with bluetooth support. My old phone (Sony t630) connected to the car via bluetooth flawlessly. It shared the phonebook with my car, and automatically diverts calls to the car when I'm driving. I can answer the phone via a button on my steering wheel, which automatically cuts out the radio and allows me to take calls while driving.
The Nokia "pairs" with my car. However, regardless of what I do, it will not share the phone book, nor will it transfer audio to my car's sound system. According to the Nokia documentation, the pairing process requires that a code be entered for the bluetooth device on the phone, and for the phone on the bluetooth device. I cannot set a code in my car (the bluetooth device), since that is not an option. I can set the code on the phone for my car, and the phone then reports "Pairing Complete". Setting a code on the car was not required for my trusty old Sony. Though the N91 claims "Pairing Complete" there does not appear to be any mechanism for activating the car handsfree via the phone, and the car does not automatically take a call if the phone rings while paired. (On the Sony, one can "Send Call" to a blue tooth device, if the device doesn't automatically take the call, or if the pairing takes place after the call has been initiated.)
Does anyone know of a work around to get the phone to pair for audio (I can live without the phone book). Does anyone know of a third party application that will fix the blue tooth on the Nokia to make it work more effectively with my car?
Any information that can be provided on either of these topics will be greatly appreciated. Thanks!
Dan

Hi,
Thanks for the reply. Starting with the bluetooth aspect of your question. I can't say for sure which profiles the Bluetooth on BMW supports (still researching). I can say that my Sony t630 supports all of the protocols you listed, though I can't say for certain about the "AG" aspects. It lists:
File Transfer
OBEX
Object Push Protocol
Handsfree
Headset
And several others that I don't think are relevant to this particular issue. As I said, my phone lists "Handsfree" not "Handsfree AG". I'm still trying to research what if any distinction exists there.
The important point is that the bluetooth on the BMW isn't wholly defective. It does work with at least one phone. The bluetooth on my N91 hasn't worked with the car, but I have no other hardware to test with. I don't think it is defective either. I believe they both function, I just need to figure out what needs to be done for them to play together.
I think there are two questions that I'd like to find answers to. Has anyone ever modified a bluetooth profile on an N91 (or other Nokia)? Is it possible to add bluetooth profiles that don't already exist on the phone?
As for the point I made about my N91 not connecting to encrypted networks. I am correct to assert that it does not connect to unencrypted networks, though syntactically I shouldn't say "The N91" since it implies too much.
Semantics aside, my N91 can't connect to encrypted networks so far. My research on this site (and others) indicates other users have faced the same issue, and none of those threads came to a resolution that I could find. Searching this site, and others, I had found no documented cases of an N91 functioning on an encrypted network. Since posting (on another site) I have found one user who has had success, but that user hasn't yet responded to my question of how exactly he pulled it off.
In the absense of any evidence explaining how to connect an N91 to an encrypted network, and the prevalence of people expressing difficulty with it; I think it is correct to say "The N91 will only connect with un-encrypted networks."
I'd really like to be wrong on that statement, since I own the phone and I want to connect to an encrypted network. However, I haven't been corrected yet. So, if you can point me to a thread or discussion explaining what settings were used to make a successful connection on an encrypted WLAN of any type, that would be great.
To anyone reading this or helping out, I really appreciate your time and attention. Please let me know if I can provide any other information to help with this question, or on any other topics.
Dan

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

I am running osx version 10.6.8 with safari 5.0.5. recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in. how in the world do i combat this issue? thank you!

I am running OS X, version 10.6.8 with safari 5.0.5. recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in. how in the world do i combat this issue? thank you! I have reset Safari several times.
Another new problem is Firefox telling me, when the e-mail window is open, that the window must run in 32 bit. The window is then disabled and then i have to restart Firefox.
Thank You for any help/hope you can give me with these issues. deborah

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
From the menu bar, select
 ▹ Software Update
to install the latest Java update, as well as any other available updates. That should clear the infection in most cases. You must update to the latest version of OS X 10.6 or 10.7 before you can install the Java update.
The removal tool runs automatically in the background and is then deleted. Don’t look for something to click. If the malware is removed, you’ll be notified.
After you’ve secured your system — not before — change every Internet password you have, starting with banking passwords, and check all financial accounts for unauthorized transactions.

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Running Snow Leopard and having issues syncing. Are there any donwload/upgrades that can help?

...besides Lion, which I am unable to download because it is telling me I don't have enough memory on my Mac. I am looking for a way toset up iCloud on my desktop. I still get the mobileme logo oin my system preferences???

Running Snow Leopard and having issues syncing. Are there any donwload/upgrades that can help?
Yes. iCoud requires Lion v10.7.2
Read here > Apple - iCloud - Learn how to set up iCloud on all your devices.
am looking for a way toset up iCloud on my desktop
It can't be done with Snow Leopard.

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks in response to Pita Fito I have contacted three more people that made the upgrade and they have the same problem

I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
in response to Pita Fito
I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...

I can send e-mails just fine with apple mail on yosemite...
Might not be a generic problem but rather a personal problem..
You should try find a fix rather than waiting on apple.
Hopefully somebody can help you out.
More than happy to help with your settings/preference pain... And compare mine with yours...
If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
Is it a gmail or icloud email acount? Can be of more help if it is.

Audio and video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 13" laptop after Windows 10 FREE Upgrade?? - Intel Core i5 processor- 4GB memory I'm sure others are have the same Audio/video problems: - there is Sound and video playback but the sound and video is repeated slowly forward....impossible to understand the audio. The video is clear but also being played in repeated frames as it moves slowly forward!- sounds coming out of the speakers ok - everything was working great on Windows 8.1 (before upgrading to Windows 10). there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until a real fix is provided?? Regards - VK

I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27

Upgrade to 11.1.1.6 and Jdeveloper issues

Dear all
I completed the migration of my SOA environment to 11.1.1.6, including upgrade of WLS, upgrade of SOA infrastructure and schema upgrade with PSA. The environment seems to be working fine.
The issue is that, when I try to install Jdeveloper 11.1.16, it reports that my SOA installation is still at 11.1.14 level, and I can't continue,
Any help will be appreciated.
Thanks

Hi Arturo
I replied to your same question posted in different forums under Weblogic Server. JDeveloper and WLS+SOA should and must be in different middleware homes. Same folders may work but it overwrites some JARs. And in future you cannot upgrade this type of installation. We ran into this issue 2 yrs back with 11.3 having all in one single folder, and we were not able to upgrade it.
Best is, to have totally different folders as I mentioned in your other forum.
WLS/SOA upgrade to 11.1.1.6 and JDeveloper issues
Thanks
Ravi Jegga

OS 10.2.1 upgrade and bluebooth issues

Similar Messages

Maybe you are looking for