OS 10.3.1.156​5

Unfortunately I have upgraded my z30 to bb os 10.3.1.1565.  I have stuck with BlackBerry over the last 7 years as the best phones for a business use but I feel that this latest update has taken too much of an android turn. As I spend a lot of time a car, voice dialling via a vm-605 bluetooth kit was a near perfect solution as after activating voice dialling all that was needed was to say call, name and location, (e.g. Call Joe mobile). The latest version of bb10 has introduced blackberry assistant which as far as I can see allows me to speak various commands but requires me to look at the phone and also select by touching the phone, not at all convenient when driving ( and also illegal in the UK)
So the question is how do I downgrade my os to a previous version to get my phone back to a workable business phone.

Enhanced . Yes I understand that I can now do all the things I could before with voice activation but It is still true that if you activate BB assistant and say call and a name and it comes back with possible multiples for that contact because of similarity , (or not as I have found on occassion), it will not speak the multiple contacts but just displays them on the screen.
The old version in BB os 10.2.1 used to reply with the phrase "did you say" and repeat back the interpretation of what you said and wait for you to say yes or no before moving on to the next option. the old version also used to allow you to select voice dialling only. You could also by saying the word "exit" at any time leave voice dialling on the old version at any time. BB assistant keeps repeating its last request until you manually exit the application by closing it by touching the screen.
So enhanced it might be but better i think it is not.
Again does anyone know if it possible to load earlier version of the os.
Thanjks

Similar Messages

  • Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    Warehouse managment has its own movement types, most identical to inventory management movement types.
    These WM movement types are determined via reference movement types.
    the error you have just looks like your customizing is not complete.
    IMG > LE > WM > Interfaces > IM > define movement types.

  • 156" width Crystal Report with Visual Studio 2005

    Post Author: kunchesm
    CA Forum: .NET
    Hi,
    I have a requirement to design a 156" width report (for exporting to Excel). And naturally i dont have printers to support this huge width reports (as these reports are not used for printing but just for exporting to Excel).
    One of the option which i have tried to design these reports is -
    - Installed MIcrosoft XPS Document writer and
    - Created a new server form (in Printers&Faxes>File>Server Properties) and assigned my custom width & Height for the paper size as per my requirement
    - Used this printer and form in my crystal report
    Now, my question... is there any better alternative or option to design huge width Crystal reports in Visual studio 2005? Any help in this regard is highly appreciated!
    Thanks & Regards
    ksm

    Hi Ganesh,
    So it all depends on how you created your WEB Project. If it was a CR Web App then no issues, if it was a WEB Form app then no issues except you need to copy the whole folder: C:\inetpub\wwwroot\VS2013WebsiteCR\aspnet_client
    to your app folder, maybe...
    If it was an empty WEB app then it may be an issue with permissions ( more on this soon once we do some testing, R&D may have provided a work around to get IIS Express to work, not sure about using IIS directly.
    Also search on Sessions and PostBacks, to get the second page you need to keep the session open/active. If not you may get nothing ot the same page everytime.
    Don

  • Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

    Hi Guys,
    I am currently facing some issues with respect to the deliver creation.
    The scenario is somthing like this.
    I have assigned a FOC Item category to an Consignment Issue order type.
    The system is able to determine the Item category successfully.
    However when the delivery is created it throws an error message
    'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
    Not sure why this occurs.
    All the settings seem to be set.
    If any one of you can help me out it would be great.
    Thanks.
    Regards,
    Pandi

    Dear Pandiraj
    The standard process is that consignment issue order should be created with reference to Proforma invoice.  Having said that I dont understand why you have assigned a FOC item category to issue order.  Not sure, whether this will work.  Also I feel that you should explain in detail the process for which you are configuring this.
    thanks
    G. Lakshmipathi

  • Error while determining ref.mov.type for WM via table 156S:601///

    Hi SAP gurus
    while doing delivery i am getting error like
    Error while determining ref.mov.type for WM via table 156S:601///
    please give me needful solution
    regards
    Sarvesh

    Chk via
    SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
    maintina the correspoding entries..
    BR,
    Krishna

  • Satellite M50-156: How can I change resolution for my external monitor?

    Hi,
    I bought an exernal monitor for my laptop M50-156 which has a resolution of 1920x1080.
    But the problem is that such a resolution is not available in the display settings of my computer!
    I tried to update the graphic card and chipset, but the max resolution I have is 1280x1024!
    So my external monitor cannot display properly :( Did anybody have the same problem?
    Please help.. Thanks.
    Beb

    > But the problem is that such a resolution is not available in the display settings of my computer!
    The resolution is not available and this says everything!!! Its not possible to choose this and you will have to use another resolution!
    There are two reasons why your favorite external resolution is not available:
    1) the graphic card chip does not support this
    2) or the graphic card driver does not contain this resolution.
    In your user manual you can find all supported and available external resolution
    But I assume the 1920x1080 is not supported

  • Send SMS with GSM Modems (D-Link DWM-156)

    Hi
    I am developing an application for GSM Modems (D-Link DWM-156) in C#.Net using AT commands. I have a problem sending English SMS. I try to send "hello", But I receive
    "e2□y" in my phone or ...exept hello!
    when I send "h"(one character) ,I receive correctly in my phone. but when 2 or more character for example "hello", ,I don't receive correctly in my phone.
    serialPort1.DataBits = 8;
    serialPort1.Parity = Parity.None;
    serialPort1.StopBits = StopBits.One;
    serialPort1.BaudRate = 9600;
    serialPort1.PortName = comport;
    serialPort1.DtrEnable = true;
    serialPort1.RtsEnable = true;
    serialPort1.Encoding = Encoding.GetEncoding("iso-8859-1");
    serialPort1.Open();
    serialPort1.DiscardInBuffer();
    serialPort1.DiscardOutBuffer();
    serialPort1.Write("AT\n");
    serialPort1.Write("AT+CMGF=1\n");
    serialPort1.Write("AT+CSCS=\"PCCP437\"\n");
    serialPort1.Write("AT+CMGS=\"09390150369\"\n");
    serialPort1.Write("hello" + "\x1A")
    I  replace \n with \r.but it doesn't do correct too.

    This is likely because your C# strings are unicode (wide). Use one-byte strings.
    -- pa

  • Qosmio G20-156 - no sound

    Hi,
    i'm having a bit of trouble with my g20-156.
    It had stopped locating wireless networks, so as it was in need of a bit of a clean up anyway, i restored it back to factory default settings.
    The good news is that the wireless problem is now resolved - the bad news is that i no have no sound!
    I have checked all of the settings in the sound and audio menus and cannot see anything obvious.
    There is a 'mute' light next to the volume wheel that is permanently on.
    Any help would be greatly appreciated, as it's driving me crazy!
    thanks

    There is no manual mute button.
    If the mute is unchecked in control panel -> sound then the sound should not be muted.
    You said you have set the Qosmio back to factory settings using recovery disk and this didnt help?
    Hmm strange for me this would mean that this might be a hardware issue.
    The sound driver is from Sigma its very unusual sound driver
    Check this HowTO about how to find right drivers maybe you will need some 3rd party drivers
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  • Failed to retrieve data from the database.DB Vendor Code 156

    Hi,
    We recently migrated our scheduled Crystal Reports from BO XI R2 platform to BO XI 3.1, and are having issues with select reports that pull from the same SQL database.  The tables and fields exist in the database - and I ran the SQL in a different tool and the syntax is correct.  When I try to run an on-demand or schedule one of these reports in 3.1 Infoview I receive the following error:
    Failed to retrieve data from the database. Details: [Database Vendor Code: 156 ]
    Running:
    CR 2008 SP2
    BO XI 3.1 SP2 (FP 2.7)
    Please advise!  Thanks!

    Hi LuAnn,
    Not really clear what he said but I believe this is correct. The BOE servers are typically running under the local System Account. So when it passed the report job from the BOE Server it is the Local System account that the database is getting. We only do single hop for security. Which means if you are logged into InfoView under your local domain account and try to run a report BOE will not, unless specified in the custom database connection options in the CMC, pass your credentials to the DB but will pass the local system account credentials which is likely why these reports are failing.
    As A TEST only Ask your Administrator to set up a user account in MS SQL Server that has rights to run all reports. Or when you create the report check on the option to use Trusted Authentication. Then when the reports are published to BOE your log on credentials should get passed to the DB server through BOE.
    You'll have to more testing to find a Use account that you can run BOE Servers under and still maintain DB security and report level security that works for you. I also suggest you post your security questions to the BOE Administrator forum to get help configuring all of this and what others are doing.
    Thank you
    Don

  • I'm Using home sharing and there are 156 tracks I can't import because these tracks were purchase with a diff account

    I'm Using home sharing and there are 156 tracks I can't import because these tracks were purchase with a diff account. How could I import them in my new computer
    TY

    Authorise the new computer to the older account. Can you do the transfer now?

  • I am having problems with my canon mg2520 trouble code 5,156,69

    My scanner quit working. the printer prints and when doing a manuel scan I can perview the scan but it will not scan the material and place it in a file.
    I am using a Dell Insp. 660s or 6605 desk top computer running windows 7 home premium and service pack 1. My printer/scanner is a Canon mg 2520.
    When attempting to scan i get a code 5,156,69 and message telling me the printer is either not connected or turned off.
    The printer connects just fine and prints with no faults but wont scan.
    I have rebooted the computer and uninstalled the printer. reinstalled the printer and get a message that drivers are not installed. I use the installation disc to reinstall the drivers but get a message that the printer cant be found. How ever the printer still prints just fine.
    I have run tuneup utilities and found a lot of problems and corrected them still have printer but no scanner.
    I red your forums and performed the process for repairing a scanner with trouble code 5,156,61 on a mg2120 and a dell lap top but this also failed. I know this is not the same code I have but the complaint was the same. 

    Hi Toyvo,
    Since reinstalling the printer using the installation CD did not resolve the scanning issue, we can try downloading the latest drivers from the Canon USA website.  The following link will take you to the initial download page for your PIXMA MG2520:
    PIXMA MG2520 Drivers and Software page
    Once on the initial download page for your model, please do the following:
    1.  Verify that your operating system type is selected correctly in the OPERATING SYSTEM field.  If it is not, please select your operating system from the drop-down field. 
    2.  Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click the FULL DRIVER AND SOFTWARE PACKAGE file.  When you do, another page will appear giving details of the file you are about to download will appear. 
    3.  Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button.  After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver.  The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded. 
    Once the new drivers are installed, please restart your computer and attempt to scan. 
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I have 2 downloads "Sneak Peek: America The Story of Us" on my computer that I can't get rid of. One is HD &156.9 MB, the other 62.3 MB. I don't want them to download, what can I do to remove them?

    I have 2 movies, "Sneak Peek: America The Story of Us" on my computer attempting to download.  One is HD 156.9 MB, the other 62.3 MB. I have tried several things to remove them from my account  but that doesn't work. What can I do to remove them?   

    im so happy I have a iTunes Card Code absolutely free! I got it at http://linkbitty.com/freeitunes2014

  • DWM-156 D-link Mobile ConnMgr

    Hello All,
    I am trying to make my 3G USB dongle work with my macbook pro early 2011 .
    When starting the application D-link Mobile Connmgr it seems that the window for entering the pin code doesn't show up.
    I found with google a pdf
    http://www.dlinktw.com.tw/temp/dk2Support_Firmware/998/Readme.pdf
    wicth tals about a version 2.10 of this software but i can't find it anywhere even on this chinese site using google translater. Doesn anyone knows a olution ?
    thx,
    cyrus

    Nice too meet you .I am Henry.  live in Taiwan . This is my first time to answer on the web .
    I ever use  DWM 156 A1  Product version:1.0.1.103 on the mac book pro (last vision core 2 Due ) .
    It can work on my old macbook pro.
    But It can't work on my new macbook pro.
    I only have  v1.0.1.103 driver . I also can not find new vision.
    Could  it help you ?
    Best Regards
    Henry

  • CanoScan LiDE 220 error Cannot communicate with scanner Error 2, 156,182

    A month ago I bought a scanner the "Canon CanoScan LiDE 220" .
    I get this scanner after a month of testing not stable / operational.
    I keep getting the following error message :
    and also the error 2, 156, 182
    Configuration:
    A. Mobo ASUS X99-A > with the latest Bios Level
    B. Windows 7 64-Bit
    C. When connected to a USB 2.0 or 3.0 does not matter.
    D. Scan Driver is the
    http://www.canon.nl/support/consumer_products/products/scanners/lide_series/canoscan_lide_220.aspx
    CanoScan LiDE 220 Scanner Driver v. 1.01 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP)
    File version: 1:01
    Release date: April 24, 2015
    E. Quick Menu v 2.5.0 (Windows 8.1 / 8.1 x64 / 8/8 x64 / 7/7 x64 / Vista / Vista64 / XP) File version: . 2.5.0 " is used.
    Please help me, It's very frustrating when you buy new stuff and it all turns out not to work.
    Regards,
    Rob Blankestijn

    I am also getting a similar error, except mine is "Code:2,156,182"
    If anyone is also getting these errors or if someone on Canon tech support could rectify this, I would really appreciate it. 

  • Macbook cannot detect D-Link DWM-156(A7) USB modem after upgrading to OS X Yosemite ver 10.10

    Hi
    My MacBook Pro 13" is unable to detect D-Link DWM-156(A7) USB modem once I open the D-Link Connection Manager app (to connect to the internet) even though the USB is plugged in.
    The MacBook is able to detect the USB at first, but once after I open the D-Link Connection Manger, it can no longer detect the USB Modem and a notification which says "No USB Modem Connected" pops up.
    This problem only surfaced after I upgraded the Macbook to OS X Yosemite ver 10.10. I tried to solve the problem by restarting the Mac but the same problem still arise.
    What do i do?
    Thanks in advance.
    Regards

    I figured it out!
    I had the same problem with the dongle sent to me by Telkom South Africa.
    Mine was D-Link Model: DWM-157. Here's how I fixed it.
    I basically flashed or updated the firmware on the dongle to the latest one I got from the D-Link website.
    1. You need access to a PC (Windows computer).
    2. Go to: http://www.dlink.com/uk/en/support/product/dwm-157-3g-hspa-plus-usb-adapter
    3. Scroll down and download firmware version 4.5.4.7
    4. Once download is complete, move over to your windows PC. Plug in the D-Link USB dongle.
    5. Run the firmware update on the Windows PC while the USB Dongle is plugged, Follow the prompts, it takes a little while, sometimes it seems like it is stuck but be patient. Once its done it will ask you to press any key to continue.
    6. After the install, pull out the dongle and plug it back in, sometimes the device installation prompt will appear. If so, rerun the device installation again. Wait for all the drivers to install. If not open d-link connection manager on your windows PC and test if it is able to make a connection to the internet. If the test was successful go to #7 below.
    7. Go to your Mac. Uninstall the current D-Link connection manager your have.
    8. Plug the USB Dongle back, the installation prompt will pop up again.
    9. Go through the installation steps and a prompt will pop up asking you to restart, restart your machine.
    10. Run D-Link connection manager and you can now get to the connection screen. Wait a while for network to be found.
    11. Click connect.
    12. Come back here and tell us if this worked for you. It certainly worked for me.

  • Trying to click and drop photos from iPhoto into an Empty SD card. all I am getting isThe item "IMG_0346.JPG" can't be copied because there isn't enough free space. Card is 156 MB Photo is 1.56MB. Help please.

    Trying to click and drop photos from iPhoto into an Empty SD card. all I am getting isThe item “IMG_0346.JPG” can’t be copied because there isn’t enough free space. Card is 156 MB Photo is 1.56MB. Help please.

    Select the photo(s) in iPhoto and export to a desktop folder (file menu ==> export) - see this user tip for export options - then be sure the card is not locked and in the finder verify available space and if it is adaquate drag that folder to it
    LN

Maybe you are looking for

  • Hyperlink with BEx in BOBJ 4.0

    Hi, I'm using Webi reports directly from SAP BW Queries in BOBJ 4.0 Environment. I have created 2 WebI reports from 2 BI queries respectively. Both BI queries are using Fiscal year/period variable 0P_FPER. Step 1: From WebI report 1, I can call the o

  • Y50 display questions

    I have a few questions about the display on the lenovo y50 touch.What are the specifications of the display? (like brightness, etc)The touch model is heavier than the non touch one, is it because it has a touch screen? I saw the instructions on how t

  • ATI Radeon 3870

    In the new 3870 card, when and where is the HDMI output used? I thought none of the Apple Displays had HDMI connections. Is some kind of external box needed? Is this primarily for games? Carlos

  • Command click in 10.4.11 and Safari 3.0.4

    I just upgraded to 10.4.11 on my MacBook Pro laptop. Before the upgrade, when I wanted to open a website new window, I would "Command click" on the link and it would open the site in a new window. Now when I "Command click" it does not open in a new

  • My Lightning Charger Won't Work

    my lightning charger for my iPod Touch 5th gen won't work, but when i plug it into another charger it does. i don't have any extra chargers at home, and need to figure out what's wrong with it. any help?