OS 10.3.9 and adding a new internal drive
Hi -
I have a G5 1.8ghz Dual with the original 80gig hard drive.
I would like to add a new internal drive. After reading post I like the WD SE16 500 GB sata drive.
Do I have to upgrade to OS 10.4? I know I should but do I have to do this first. Also can I boot off the WD Drive.
Great drive. No OS limitation. It does work. There was one 400GB model a year or two ago that would not work in early G5s. The 500GB model is fine.
Check out http://www.xlr8yourmac.com
OWC also has Maxtor 300GB MaxLine III $73 if you want a couple smaller and less expensive.
I think 10.4.9 is nice and good time to upgrade.
Similar Messages
-
Backing up images on external hard drive and restoring to new internal driv
I recently purchased a new external hard drive and a new internal hard drive. Before installing the new internal drive, I backed up the old internal drive on the external drive. Then I installed the new internal drive to my Macbook Pro. However, when I tried to access and print my Aperture images on the new internal drive, I received an error message saying "versions with unavailable master images cannot be printed." I clicked on 'show referenced files," but couldn't determine how to recover my master images. I checked the forum and under "referenced files go offline after restore from a backup" it said to go to "File>manage referenced files" but nothing else. How can I recover my master images? Please help - I have nearly 6000 images that are lost without recovering the master images. And no, I was ultra stupid in not placing everything in a vault = but I'm relatively new to Mac OS and thought a backup would be sufficient. Thank!
The volume name of the new hard drive needs to be the same as the old hard drive - rename it if you have to - then they should be fine.
If you cannot seem to make this work then you will have to reconnect them with locate referenced files under the file menu. Select all the files that are disconnected before going into the dialog.
RB -
I deleted my old email address and added a new one, after my iPhone died iCloud keeps popping up asking for the password of my old email address. I can't remember my password and the account is still gone, it pops up every few seconds. How can I fix this?
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?
Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance -
How to install and reconfigure a new hard drive?
How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can giveHow to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
Hi!
I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege
-
I have a wireless printer and received a new hard drive on laptop. How do I reset the scanning
I have a wireless printer and received a new hard drive on laptop. How do I reset the scanning
Macdi2000 wrote:
How do I reset the scanning
I have no idea what your question means; can you clarify?
Also, what Adobe software do you use? -
I dropped my mac pro. The disc drive plays but will not record. medium drive error. How hard is it to replace the drive my self. i see screws on the bottom. Could I just order a new internal drive and replace it? Or is it too complicated for the average person? Would be cheaper to buy an external drive than to replace internal one? Any advice is appreciated
How certain are you the superdrive ONLY is at fault?
That depends on your skill level, if you grew up tearing things apart and putting them together, its absurd how easy it is.
For some however its too daunting. On a general skill level for the "average" person its about a 3 out of 10 in difficulty.
Can you order same? yes. -
My old c: drive was becoming slow. I moved this drive as my backup e: drive (didn't delete any files) and installed a new c: drive. I can view and move all my files from this e: drive to the new c: drive. However, I have not been able to import my Firefox bookmarks. I have looked all over the hard drive and cannot locate them. Any suggestions?
Hi,
The path to look for would '''E:\Users\???\AppData\Roaming\Mozilla\Firefox\Profiles\***.default'''''', assuming that it hasn't been deleted and the old installation of Firefox was a normal installation. The bookmarks + history are stored in the '''places.sqlite''' file. The auto bookmarks backups are in the '''bookmarks''' folder. Please also see [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]. The link also has information regarding other files which you may want to copy.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins] -
The hard drive for my MacBook Pro recently crashed. I purchased and installed a new hard drive (i.e. a Samsung SSD). When I try to re-install the Mac operating system, I come to the part of the installation instructions where you are asked to choose a disk to install the software. However, there is no disk listed in the selection screen. Why is there no disk in the selection screen?
Welcome to Apple Support Communities
You haven't formatted the SSD, so you can't install Mac OS X.
First, close the OS X installer and open Disk Utility. Then, choose the SSD at the top of the sidebar, go to Erase tab, choose "Mac OS Extended (Journaled)" as "Format", and press Erase. Finally, close Disk Utility and reinstall OS X. See > http://pondini.org/OSX/DU1.html -
I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on an external drive. Both drives are backed up on Time Machine. I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac. This would save having to transfer several hundred GBs of data. Will this work using Set Up Assistant?
Your user account on the new Mac must have a different UID than on the old one. See the pink box in Problems after using Migration Assistant for an explanation.
You'll need to change the permissions on the iPhoto library on the external HD. Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password.
Then click the plus sign, select the user account you want on the next screen, and click Select. Then change Read only to Read & Write for that user via the little arrows. Finally, click the "gear" icon and select Apply to enclosed items. That may take a few mintutes on a large library. -
Could not see my photos after Installing new internal drive
Aaarrgghhh! I installed a new internal drive to keep data separate from applications, transferred all the data to the new drive and now all the work I did in sorting thousands of photos has gone, same with iTunes. Does anytone know how to restore my categories of photos and tunes?
thanksBefore anyone can help, they need information to work with. Basic stuff: What version of iPhoto. What version of the Operating System. Details. What were you doing when the problem arose? Did it ever work properly? Step-by-step descriptions of how you got to this issue. If something doesn't work, are there error messages? What happens when you try to do this thing? And what steps have you tried already to solve the issue. With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that a helper is simply guessing. With information, s/he may be able to get your issue resolved sooner. -
Upgraded to ios7 on iPad 2. Now can't send or receive mail (outlook).
I tried starting and restarting. I tried rebooting. I tried deleting mail account and adding in again. I
Now what do I do?I think I have solved this problem on m iPad2 by:
1. Reinstalling my email account.
2. Changing the settings on my PC to stop it from deleting my email from the server before my iPad could load them.
My PC uses Windows Air Mail. I made no known changes to my PC from the time I was running iOS6 to the installation of iOS7 ??? MS did come out with several updates this week??
3. In the same time frame when I was scrolling through web pages the Control Bar popped up every third stroke. It is very easy to change the setting of the Wy Fi setting from On to Off while deleting the unwanted Control Panel without any indication. This means that the Wy Fi must be constantly checked to make sure that is ON???
The three problems at the same time have made this the worst mess to fix in 12 years of internet use. The fix has lasted for about 8 hours at this point, Tomorrow will tell. -
Transferring Itunes data and Library to new hard-drive question
Hello,
First I want to state that I made a mistake when I transferred my music to a new bigger harddrive. My bad.
I look here for some guidance, I read this article after the fact: http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive so it was too late for me and I got these "!" signs on all my song. I have over 5000 songs (not including podcasts, movie and TV shows.
I tried to move my library (succesfully) in my new hard drive so I could keep my laptop clean of all music.
I though I will be clever and replace the target links into the "Itunes Library.xml" and "Itunes music Library.xml" files. Well not so clever because I still have the issue.
My question: Does anybody knows what else should be done to fix this issue (if fixable)? I would try to avoid linking all my music one at the time by using the "locate" function that ITunes pop up when you try to start a song.
It is also too bad that you must do it one song at the time, I calculated that if I do 20 songs a day it's going to take me 250 days and more...
Thanks for any idea/solutions you may have
ThierryI though I will be clever and replace the target links into the "Itunes Library.xml" and "Itunes music Library.xml" files. Well not so clever because I still have the issue.
iTunes does not use these files.
They are created only for other apps to access the iTunes library.
Does anybody knows what else should be done to fix this issue (if fixable)?
See this -> iTunes Track CPR v1.3
"This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx). Any correct files found will be added to iTunes and will replace the "dead track" in each playlist it appears in (except Smart Playlists). Most tag data will also be rescued." -
I've been thinking about adding a second hard drive. The problem is that I'm not sure which configuration would best fit my needs.
Currently I have one 120GB Maxtor SATA drive which, after six months, is half full. This leads me to conclude that eventually I'm going to fill it up.
Since I have only this one drive and no DVD writer, I don't have any good way of backing up my drive in case something fails. I don't have any vital data, but I've spent a long time getting my settings perfect, and I don't want to lose them.
I also know that doing a RAID doesn't give me more space. I know that RAID 0 basically uses two drives in parallel to double the storage efficiency, but if one drive fails, all the data on both is lost. I also know that RAID 1 copies all changes to the second hard drive and thus also does not increase my overall storage space.
What are my other options? If I buy another SATA drive, what ways do I have to copy my entire disk onto the new one? How does XP handle installation on the new drive? How do I switch between drives? I was thinking that I could put all my large music and video files on the new drive and then optimize my old drive for my games. This will still make it possible for me to listen to my music in Winamp while playing a game, right?
How do I install the new drive? Do I have to go into my BIOS and configure something? Here's what it says about my IDE setup (I don't know what IDE means either.)
Primary IDE Master = DVD-ROM
Primary IDE Slave = CD - RW
Secondary IDE Master = n/a
Secondary IDE Slave = n/a
Third IDE Master = Maxtor HDD
Third IDE Master = n/a
etc.
What does Master/Slave mean as far as usage and performance goes? Which SATA plug should I use for the new drive?
Sorry for the silly questions, I've never used a machine with more than one hard drive before.
EDIT: What brand hard disk do you guys recommend? I have in mind either Western Digital or Seagate. I won't have any compatibility or performance issues from using two drives of different make and capacity, will I?
Here's my specs:
Intel Pentium 4 2.8e HTT @ 3.26GHz
Thermaltake Spark 7+ Xaser Edition A1715 CPU Cooler
MSI 865PE Neo2-PFISR motherboard (BIOS ver. 3.8)
2x512MB OCZ PC3700 Gold Edition Rev 3 Dual Channel Enhanced Latency DDR @ 466MHz (2-3-3-5)
Built-by-ATI Radeon 9800 Pro @ XT 128MB DDR 256-bit @ 415/744 (Catalyst 4.12)
Arctic Cooling VGA Silencer Revision 3
Creative SoundBlaster Audigy2 ZS Platinum
Cyber Acoustics CA-4100 4.1 Surround
Maxtor 6Y120M0 120GB HDD 7200RPM SATA150 8MB cache
Sony DDU1612 40x/16x DVD-ROM
Sony CRX230ED 52x/32x CD-RW
Enermax Noisetaker EG475P 470W PSU(+3.3V = 34A, +5V = 40A, +12V = 33A)
Ultra Dragon ATX Mid-Tower Case
Windows XP Pro SP2Hi. I will try to help with some of your questions. Its easy but time consuming to move/copy files from one hard drive to another. Just drag the files/folders from one drive to the other one. That moves them. To copy them Select them and the select copy then go to the other drive and select paste. With two hard drives its best to set them up as one for system files and apps (your c drive) and one for storage (your D drive). Your optical drives then become e and f. If your case you would leave your current drive as C and the new drive would become your d storage drive. Moving your mp3s, vids, etc (i.e, non-system files or not apps), could take some hours, but that is usually no problem because you can do small numbers of files at a time or do it overnight. By the way you never want to fill up your hard drive, especially your c drive. Always leave 20+ percent free so you can get quick reading/writing to it. Mp3's, vids, pix etc play just fine from your stoage drive and your games play great from the c drive. And you can do both at the same time.
Masters and slaves have the same performance but that only applies to IDE drives. There is no master/slave designation for SATA drives.
Backing up your system files can then be done on your storage drive, but as harib said you can back up the important system files to a CD. Windows provides a backup utility for that. You can also back them up to your storage drive if you want.
If you truly want backups of ALL of your files, including storage, is simply a matter of adding another drive and then copying all of the files to the new drive. Hopefully you would never have both those two drives go bad at the same time.
Western Digital, Maxtor and Seagate are all good drives. You first must decide if your new drive will be SATA or IDE. You might just get another SATA drive for storage, but a lower cost IDE drive of similar capacity for your storage drive likely will be just as fast for for mp3s,etc. SATA really helps on your system drive which you already have.
Installation of drives is a bit more complicated with SATA drives in the sytem but can be relatively easy to do once you decide what drive to get. Don't base your purchase decision on installationo ease.
When you are about ready to install come back to the forum with specific details of what you want to install and someone will be happy to talk you through the process.
Good luck!
Maybe you are looking for
-
Windows Intune support deployment for windows phone (8.1) *.appx files
Hi We are trying to deploy a windows phone 8.1 appx file with intune (over sccm console). the appx file is signed with a valid symantec certificate. the installation of the app fails, either when we upload the file as "Required" (so pushing it automa
-
Can I share my iTunes library with my daughters iPod?
Hello, Is anyone able to tell me if you can share an iTunes library with another person who lives at the same address, ie my daughter. Thanks
-
If the space of the windows storage space server is full, is it possible to setup another windows storage space server and combine the new one to original storage pool?
-
Edited RAW photos not appearing in Lightoom V2 automatically
I have just upgrade to Lightroom 2 and I now find that if I edit my Canon CR2 RAW images in Photoshop CS3 directly i.e. CTRL +E (not CTRL+ALT+E) and then use SAVE, the image which is now a TIFF file does not automatically appear in the Lightroom cata
-
Logged out of the app store and can't log back in!
Hi all, Earlier this evening I logged out of my app store account on my iPhone and now I can't log back in. It says "Could Not Sign In" - "An unknown error has occurred". I tried logging in with my other two Apple accounts and it still says the same