OS 10.3.9 defaults to a refresh rate that is too high for my monitor.

Hello experts!
I bought a great little NOVA 15" LCD VGA monitor which I love since it has a TV tuner built-in. It is capable of 1024 * 768 @ 56 to 75 Hz. Unfortunately, from start-up Panther uses a default of 85 Hz whenever this monitor is the only one attached, and nothing gets displayed.
I can leave the Mac on and swap VGA out to my old Apple 15" Multi-scan and the desktop is there. Now that I can see what I'm doing, I can change the refresh rate from 85 Hz to 75 or 70 or 60 Hz. Still leaving the Mac on and switching the VGA output back to the NOVA LCD results in a normally displayed picture at any of the 3 lower refresh rates. But if I open Display Preferences and press the Detect Displays button, the desktop disappears and the NOVA monitor indicates "no signal." As you may have guessed, Panther is trying to give it 85 Hz again.
The monitor is DDC 1/2b compatible, and the ATI 9200 is DDC 2a/b compatible, so they should be sending the right info to each-other.
What I would like is for someone to tell me how to make the Finder change the Monitor settings to 1024 * 768 @ 70 Hz in a way that can be assigned to a Function key (say F5). That way, when the Mac has finished starting-up, I can just press F5, and even though the screen is blank the Finder will run a little program to change the monitor settings and, voila, I will have a working display.
I have looked into Apple Script, but it seems to have no control over this sort of function (unless I have missed something).
Many thanks in advance, and Happy New Year!
1.1GHz G3 B&W, ATI 9200, 512MB RAM Mac OS X (10.3.9) Logitech gaming mouse MX510

The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks.

Similar Messages

17" crt monitor, but not all refresh rates showed

Its a duplicate from this thread:
http://bbs.archlinux.org/viewtopic.php?id=89220
But this is the right subforum.
Only some refresh rates are displayed as an option.
Look xrandr:
$ xrandr
Screen 0: minimum 320 x 175, current 1280 x 1024, maximum 1600 x 1200
default connected 1280x1024+0+0 0mm x 0mm
1600x1200 50.0 56.0
1400x1050 51.0 57.0
1280x960 52.0
1024x768 53.0 61.0 62.0 63.0 64.0
800x600 54.0 67.0 68.0 69.0 70.0 71.0 72.0
640x480 55.0 76.0 77.0 78.0 79.0
1280x1024 58.0* 59.0
1152x864 60.0
896x672 65.0
832x624 66.0
720x400 73.0
640x512 74.0 75.0
640x400 80.0
640x350 81.0
576x432 82.0
512x384 83.0 84.0 85.0 86.0 87.0
416x312 88.0
400x300 89.0 90.0 91.0 92.0 93.0
360x200 94.0
320x240 95.0 96.0 97.0 98.0
320x200 99.0
320x175 100.0
The weird value rates are fault of the nvidia driver telling jokes.
But how can i have more refresh rate in 1280x1024 than 1280x960? My monitor is a standard 4:3 crt.
I tried disabling EDIDs and specifying the sync values according to the monitor.
The monitor is a samsung syncmaster 700p.
Any ideas? Thanks in advance.
HEre is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Dec 9 16:34:26 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
# Load "drm"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
# Load "dri"
EndSection
Section "ServerFlags"
Option "DontVTSwitch" "no"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 160.0
# Option "DPMS"
Option "UseEDID" "false"
Option "IgnoreEDID" "true"
Option "ModeValidation" "NoEdidModes"
EndSection
Section "Device"
# Driver "radeonhd"
# Option "AccelMethod" "exa"
# Option "DRI" "on"
# BusID "PCI:1:5:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "UseEDID" "false"
Option "IgnoreEDID" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "nologo" "true"
SubSection "Display"
Depth 24
Modes "1600x1200" "1400x1050" "1280x960" "1280x960@75" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection

I see you have a nvidia card. For nvidia users xrandr displays wrong value. If you want to check exactly what you're running, search some of the monitor options, it should have it in there. Also use the nvidia-settings, but for me at times it too reported wrong refresh rates.

Flickering/Refresh rates RoboHTML 6.0

We just recently upgraded to RoboHTML 6.0. Now the Topics
Pane on the left-hand side of the screen refreshes constantly. This
constant flickering is enough to drive you batty. I looked at
refresh rates in the online help & the only thing I could find
had to do with Robosource Control which we do not have loaded.
One interesting thing that I just discovered is that the
project that is flickering is a very big project divided into 30
folders & hundreds of topics in each folder. I just opened a
much smaller project & it doesn't flicker at all. Makes me
wonder if it doesn't have something to do with the size of the
project.
Can anyone please tell me how to fix this? I sometimes spend
all day inside that huge project & that flickering is awful!
Thanks!

Hi all
Cindys, you may wish to try closing RoboHelp, opening Windows
Explorer and clobbering the ProjectName.CPD file. Just rename it so
RoboHelp can't find it. Then restart RoboHelp HTML and open the
.XPJ file. The .CPD should rebuild automatically as a result and
may eliminate the flicker. But be forewarned that the flicker will
likely continue until the .CPD has been fully rebuilt.
As for checking that RoboHelp WYSIWYG is the default editor,
it normally is. The trick is often the other option that is often
missed. The setting that determines whether the editor is
auto-selected or if the default is used. Normally that one is
configured for auto-select. If so, it *COULD* cause a different
application to open, depending on what was used to initially create
the topic page.
Cheers... Rick

Increase refresh rate of my LCD display

Hey hey hey. How can I increase the refresh rate available for my LCD display? Should I increase the refresh rate? I cannnot find where to change it.

There are different refresh rates that you can set, but I agree, 60 should be adquate. You can check this under Control Panel, Display, Settings, Then Click on Advanced, then Monitor. There you will see the refresh rate. Unclick the "Hide modes..." and you will see other rates which may not be able to be applied to your machine.

Diablo II Refresh Rate (Solved)

Whenever I start Diablo II it sets a werid Refresh Rate that causes my Monitor to be unable to display! Is there a way either in the xorg.conf or in Diablo II to specify a Refresh that must never be changed or safe ones that always must be met?
Last edited by Sean-Der (2008-07-02 00:19:11)

After the latest update with nvidia graphic's driver I had to add an entry in xorg.conf in order to force the apropriate refresh rate (for any resolution besides 1024x768)
Section "Screen"
Identifier "Screen 1"
Device "NVIDIa GeForce FX 5200"
Monitor "Belinea"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768_75 +0+0; 800x600_75 +0+0; 640x480_75 +0+0"
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
What you need to add is: (If, of course it's not already there)
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768_75 +0+0; 800x600_75 +0+0; 640x480_75 +0+0"

W540 - Get 75Mz Refresh rates on 3k screen?

The W540 with a K2100 and a 3k screen has a maximum refresh rate of 60Mz. It is not currently possible to lower the screen resolution and get a higher refresh rate of 75 or higher.
If I got to Screen Resolution > Monitor Properties > Display All Modes, they are all 60Mz even when the screen is tiny. Intel's advance feature to create a custom resolution is also disabled.
I've tried some Custom Resolution softwares, but it just made my system crash.
Are there ways around this or potential software updates that could change this?

I don't think there are any mainstream 75Hz LCDs; just a boatload of 60Hz LCDs and a small percentage of 120Hz ones.
You can't "unlock" 75Hz on an LCD that doesn't support driving it that fast, unlike CRTs, where the bottleneck was available bandwidth.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Gx620 HDMI higher refresh rates

Hello,
I've bought a Samsung SyncMaster 2233rz to get a lower inputlag and higher refresh rates. GeForce 9600m GT doesn't have a DVI-D port, thus I'm using the HDMI port with a DVI-D adapter as the monitor only has a DVI-D port. I've read you couldn't get a higher than 60hz signal from the graphics card through HDMI for some reason (..it being a mobile card). I'd imagine it has something to do with the bandwidth, but so far I've managed to get atleast 1680x1050 @ 75hz. It stutters sometimes, but quite rarely.
The refresh rate options are very limited as I use Windows 7, which reads the EDID-information from the display. Nvidia control panel registers the connectors as HDMI - HDTV. I've tried editing the EDID-informations and use powerstrip and such programs to get a higher refresh rate, but so far I'm stuck at 75hz. I wouldn't mind lowering the resolution to get atleast 100hz refresh rate, but so far I've had no luck with it. Have any of you managed to get a 100hz refresh rate from gx620 (through the vga-port perhaps)?
BR,
Exa

Quote from: Henry on 03-February-11, 19:15:00
Read this: http://www.ehow.com/about_5067955_refresh-rate-computer.html
Refresh rate is actually a term for analog CRT monitors, not digital monitors.
Hello,
I know how it works on LCD's. That wasn't the question, thanks though.
BR,
Exa
EDIT: I posted about the issue in Nvidias forum, here's the url incase it gets answers
http://forums.nvidia.com/index.php?showtopic=192351

Adding refresh rates?

my xrandr list
$ xrandr
SZ: Pixels Physical Refresh
*0 1024 x 768 ( 271mm x 201mm ) *85 75 72 70 60 100 90
1 800 x 600 ( 271mm x 201mm ) 85 75 72 70 60 56 100 90
2 720 x 576 ( 271mm x 201mm ) 60
3 640 x 480 ( 271mm x 201mm ) 85 75 72 60 100 90
4 640 x 400 ( 271mm x 201mm ) 75 60
5 400 x 300 ( 271mm x 201mm ) 75 60
6 320 x 240 ( 271mm x 201mm ) 75 60
7 320 x 200 ( 271mm x 201mm ) 75 60
Current rotation - normal
Current reflection - none
Rotations possible - normal
Reflections possible - none
I am pretty sure my monitor manages better Refresh rates that this, how can I add them in the xorg file?
thanks

I do not think that is the problem, here pieces of my xorg.conf:
Section "Monitor"
Identifier "Monitor0"
VendorName "Philips"
ModelName "109B4"
# DisplaySize 360 270
DisplaySize 269 201
HorizSync 30.0 - 97.0
VertRefresh 50.0 - 100.0
Option "dpms"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
EndSection
and
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
It is maybe about the `cvt' output program?

Refresh Rates

Does anyone know the refresh rates of Apple's notebook computers? I can't seem to find this info any place. The reason I am asking is low refresh rates sometimes gives me a headache. I'm looking at the macbook pro and maybe the air.
Thanks,
Tony

I know that my 27" Apple Thunderbolt Display has a refresh rate of 59.95 Hz - but only because it's listed in Wikipedia. That's the only source that I know that you might visit to find refresh rates on specific models.
This Wiki article doesn't list the various refresh rates that may be on the MacBook Pros, though. I suppose it depends on the screen manufacturer...
Sorry,
Clinton

Nvidia 195.36.31-1 doesn't detect horizontal refresh rate correctly

With both the nvidia driver 195.36.15 that was in the main repositories before the last update, and the nvidia-beta driver 256.35-1from aur my monitor's horizontal refresh rate is detected correctly(129.5khz with a 120hz vertical refresh rate). However, the nvidia driver currently in the repositories 195.36.31-1 doesn't detect it correctly and forces a horizontal refresh rate of about 185khz. This causes horizontal white lines to be seen all along the screen.
I'm now happily using the beta driver from aur, but I can try to pinpoint the problem if someone can point me in the right direction.
thanks.

this is not a bug. this is a nvidia workaround so that xrandr is able to handle correctly multihead refresh rates. see the nvidia readme for details, and don't worry, the refresh rate is correct, else you would see garbage.
Last edited by lloeki (2007-04-28 20:50:16)

Changing default monitor refresh rate

Hello-
I have just installed x86 Solaris8 on my system at home. I have a TNT2 Ultra card and I am using the default Nvidia TNT2 drivers included with the install on a Hitachi Superscan Monitor. I am capable of displaying the Solaris CDE at 1600x1200 but I have display issuesthat force me to reset my vertical and horizontal positioning every time I turn on the monitor or ever time the screen resolution changes.
This problem has existed ever since I got my videocard back whenI still had Win98 on the machine. The only way to correct it was to set the default refresh rate for all resolutions to 60Hz.
Is it possible to do this in Solaris8 and how?
Any assistance will be greatly appreciated!
Thank you,
Daniel J. Noah

stop the dtlogin, login on the text console, and run kdmconfig.
In kdmconfig, choose the video card menu entry, don't make changes
to the video card but use on of the multifrequency monitor entries.
For example, the multifrequency monitor entry upto 110kHz should give
~85 Hz refresh rate at 1600x1200, use one of lower freq. entries to
tune down the refresh rate...

What is the defaults refresh rate of the Mac book pro 15inch?

What is the defaults refresh rate of the Mac book pro 15inch? and how can I change it?

I don't believe there is a refresh rate for LCD or LED monitors. Refresh rate is something that is used for old style CRTs if i'm not mistaken.

Default credentials not being saved in Hyper-V Manager for a single VM

Greetings,
I have a Server 2008 R2 SP1 Standard Hyper-V box running about 8 virtual machines on it. The machine is joined to a 2008 domain.
Recently, I moved the .VHD file for a single machine from one folder to another folder. After doing so, when I connect to ONLY that specific machine via Hyper-V manager, I receive the error: "Your credentials did not work. Your system administrator
does not allow the use of default credentials to log on to the remote computer XXXXXX because its identity is not fully verified. Please enter new credentials."
I have the "Use default credentials automatically (no prompt)" option checked in the Hyper-V settings, and I have tried checking and unchecking this box and saving multiple times. I have also deleted the saved credentials and the system reports no
saved credentials.
I have attempted to change settings in the group policy (gpedit.msc) regarding enabling the Local Computer Policy > Computer Configuration > Administrative Templates > System > Credentials Delegation > Allow Delegating Saved Credentials with
NTLM-only Server Authenticaton setting, something I found in older blog posts here in the Hyper-V forum and on other websites, and it has not made any difference.
At this point, I can only assume this must be some sort of bug because I cannot identify any other possible solution for getting rid of this annoying Windows Security pop-up box. There are no entries in the Windows event log that indicate anything
odd. When I enter the correct username/password, I can still access the VM, but the credentials are never remembered, and ONLY for this single VM.
Does anybody have any knowledge of how to fix this issue? I can't believe that just moving a VHD caused all these problems.
Thanks!

Ah, finally found a solution! I cannot explain why this suddenly got changed other than to assume it must have had something to do with a recent Windows Update or me trying to install Remote Desktop Services and Network Policy and Access Services.
I roughly followed the directions from
KB954357 or this
older post on the Hyper-V forum.
FIX:
1) Run gpedit.msc on the Hyper-V host that exhibits the problem.
2) Enable the policy setting Local Computer Policy > Computer Configuration > Administrative Templates > System > Credentials Delegation > Allow Delegating Default Credentials with NTLM-only Server Authentication. Click the Show... button
next to "Add Servers to the list", and add the value "Microsoft Virtual Console Service/*" without the double quotes. Click OK. Click OK again to exit the dialog box.
3) Run a command prompt and execute gpupdate /force to refresh the group policy.
4) Now try to log into a machine in Hyper-V manager with default credentials enabled, and note that you are not prompted.
Again, I don't know why I had to do this, but it's working fine now.

Xorg and refresh rates

I'm running Solaris Express 10 x86 4/05 on a Dell Optiplex GX260. Xorg refuses to give me a refresh rate higher than 60Hz. This is using the i810 driver but it also happens with the VESA driver. Here's my xorg.conf:
Section "Module"
# This loads the DBE extension module.
    Load        "dbe"   # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
# This loads the font modules
    Load        "bitstream"
    Load        "type1"
#    Load        "speedo"
# This loads the Xst module
     Load       "Xst"
# This loads the SolarisIA module
     Load       "IA"
# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
    RgbPath     "/usr/X11/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
    FontPath   "/usr/X11/lib/X11/fonts/TrueType/"
    FontPath   "/usr/X11/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11/lib/X11/fonts/Type1/sun/"
    FontPath   "/usr/X11/lib/X11/fonts/F3bitmaps/"
    FontPath   "/usr/X11/lib/X11/fonts/misc/"
    FontPath   "/usr/X11/lib/X11/fonts/100dpi/"
    FontPath   "/usr/X11/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11/lib/X11/fonts/local/"
#    FontPath   "/usr/X11/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/X11/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
#    ModulePath "/usr/X11/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#    Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
#    Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#    Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#    Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
#    Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
#    Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
#    Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
#    Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
    Identifier "Keyboard1"
    Driver      "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
    Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""
#    Option "XkbDisable"
    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc101"
    Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
    Identifier "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "Auto"
    Option "Device"      "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
#    Option "Resolution"        "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate" "9600"
#    Option "SampleRate"        "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
#    Identifier "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber" "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber" "1"
#    Option     "SendCoreEvents"
# EndSection
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber" "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber" "1"
#    Option     "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
    Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync   30-85
#    HorizSync 30-64         # multisync
#    HorizSync 31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 48-120
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName   "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset    "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam   256
#    Clocks     25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
    Identifier "** Intel i810 (generic)               [i810]"
    Driver      "i810"
    VideoRam    8192
    # Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier "Screen 1"
    Device      "** Intel i810 (generic)               [i810]"
    Monitor     "My Monitor"
    DefaultDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
    Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
    Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
#    Mode 0666
# EndSectionIf I use the Xsun server, everything works great. I get 1024x768 at 85Hz. With Xorg, I get 1024x768 at 60Hz. Why won't Xorg drive the display at a decent refresh rate?
Thanks.

I upped the log verbosity on Xorg and checked the Xorg.0.log file. I found some interesting things.
First, I found this line:
(II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs.
Later on, I found these:
(WW) I810(0): Extended BIOS function 0x5f05 not supported.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(WW) I810(0): Set VBE Mode rejected this modeline.
Trying standard mode instead!
Presumably, "standard mode" is an eye-watering 60Hz.
This is on a Dell Optiplex GX260 with BIOS revision A09. The video chipset is an onboard Intel 82845 and the driver is Xorg's i810.
Everything works fine with Sun's X server. I get a nice 87Hz refresh at 1024x768. I'm surprised that Xorg can't set the refresh on this machine. It's listed as Test Suite Level 2 certified in the HCL. Unless somebody can tell me what I'm doing wrong here, I'm going to post this incompatibility as a comment on the HCL.

Judder using Mplayer... maybe force different resolution/refresh rate?

Hi!
(I posted this in the newbie section too, but this is maybe the most appropriate place??)
I've set up my computer as a media center using Freevo. As the main media player in Freevo I use Mplayer. The setup is working beautifully, but I'm getting some judder and it's a bit annoying. It's most noticable during bright, fast moving scenes.
So I've been trying to figure out how to remedy this, but it's harder than I thought. My setup is the following:
AMD 4200+ dual core, 2 gigs ram, Nvidia 7800GTX, 24" LCD and Pioneer LX508D plasma TV, and I'm using CoreAVC as decoder (amazing piece of software )
When I bought the 24" screen for my computer the sales guy (using windows) forced the resolution to 1920x1080. It looked a bit stretched, but if I could do this in Linux I'd avoid having parts of the picture missing on my TV. Now I have to use 1920x1200 resolution as main X session and since my TV is 1920x1080 parts of the desktop is out of view on my TV. This isn't too big of a deal though cause when playing movies they come out in 1920x1080. It'd be nice though to get the correct aspect ratio between my pc screen and my TV (I've been trying to use Twinview and clone, but it's impossible to use 1920x1200 on the 24" and 1920x1080 on the TV at the same time). I've tried to force my pc screen to use 1920x1080 (since it worked in windows it's supposed to be possible), but when I enable it through xorg.conf the screen goes blank. Using nvidia-settings doesn't give me the option of using 1920x1080 on the 24" at all.
So what I'm hoping to be able to do is to force the computer screen to use 1920x1080 and a refresh rate of 72Hz. This should eliminate alot of the judder and at the same time I won't have to use the "PC mode" on my TV (PC mode restrict the Hz to max 60Hz). Hopefully the TV will accept the 1920x1080 72Hz as any input and let me use the normal input (and then be able to use 72Hz... or 96Hz for that matter).
Anyone know how I might be able to do that? I'd really appreciate any help at all since this is the only thing that's not perfect with my setup.

Ok, I tried to change the xorg.conf file to 72Hz on the TV and it when black again. This is what the xorg.0.log shows:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux arch 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 19 13:36:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 3
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 103c,2a24 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 1002,5a34 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4379 card 103c,2a24 rev 00 class 01,01,8f hdr 00
(II) PCI: 00:13:0: chip 1002,4374 card 103c,2a24 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4375 card 103c,2a24 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4373 card 103c,2a24 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4372 card 103c,2a24 rev 11 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4376 card 103c,2a24 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,4377 card 103c,2a24 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0091 card 10de,02c2 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 13f6,0111 card 153b,1144 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:03:0: chip 10ec,8139 card 103c,2a24 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 1106,3044 card 103c,2a24 rev 80 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfcffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[b]
(--) PCI:*(1:0:0) nVidia Corporation G70 [GeForce 7800 GTX] rev 161, Mem @ 0xfa000000/24, 0xd0000000/28, 0xfb000000/24, I/O @ 0xef00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI I/O resource overlap reduced 0x00004100 from 0x0000411f to 0x000040ff
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe0000000 to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.09 Thu Jun 5 00:07:40 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.09 Wed Jun 4 23:47:25 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "TwinViewOrientation" "Clone"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7800 GTX (G70) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.70.02.11.20
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7800 GTX at PCI:1:0:0:
(--) NVIDIA(0): BenQ G2400W (DFP-0)
(--) NVIDIA(0): PIONEER_PDP. (DFP-1)
(--) NVIDIA(0): BenQ G2400W (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): BenQ G2400W (DFP-0): Internal Dual Link TMDS
(--) NVIDIA(0): PIONEER_PDP. (DFP-1): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): PIONEER_PDP. (DFP-1): Internal Single Link TMDS
(II) NVIDIA(0): Display Devices found referenced in MetaMode: DFP-0, DFP-1
(II) NVIDIA(0): Assigned Display Devices: DFP-0, DFP-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "trustda"
(**) Keyboard0: XkbModel: "trustda"
(**) Option "XkbLayout" "no"
(**) Keyboard0: XkbLayout: "no"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/Type1, removing from list!
My xorg.conf looks like this now (I don't know what values to use for HorizSync and VertFresh on my TV, the ones that are in there I just made up ):
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Mon May 19 00:34:28 PDT 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "record"
Load "freetype"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "trustda"
Option "XkbLayout" "no"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ G2400W"
HorizSync 31.0 - 94.0
VertRefresh 50.0 - 85.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "PIONEER_PDP."
# HorizSync 15.0 - 80.0
# VertRefresh 23.0 - 60.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G70 [GeForce 7800 GTX]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "true"
Option "TwinViewOrientation" "Clone"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I read somewhere that the TV is supposed to be able to show 1080p in 72Hz. But when I try that it goes blank. Maybe it has something to do with the monitor being 1920x1200 and the TV 1920x1080. The monitor won't accept 1920x1080 as resolution so I guess that can only be done in Windows...

OS 10.3.9 defaults to a refresh rate that is too high for my monitor.

Similar Messages

Maybe you are looking for