OS 10.3 works with Linksys but when startup using 9.2.2 won't work

I apologize if I'm on the wrong forum. I don't know if what I'm asking applies to Express or Extreme--all I know is that I have an airport card in my laptop. I have a wirless airport card in my old titanium G4 and it works fine with my Linksys SRX router when I'm running 10.3. When I start in 9.2.2 (which I have to do to run the version of Virtual PC I own) I can't seem to get the computer to talk to the Linksys. I set appletalk to airport and TCP/IP to airport and DHCP but when I type in the password for the router it says it can't go to the network. Any thoughts? I used to use the 9.2 side with an airport base station that has since died and I hadn't used the 9.2 since I bought the linksys. Thank you.

I hope I'm doing this right. I forgot to mention
that I am using WPA personal
This is why.
You need to be running 10.3 or later to connect to a WPA encrypted network, a Mac running OS 9.22 will only be able to connect to a WEP encrypted network.
iFelix

Similar Messages

  • My PC works OK with dowload, but when I try to make an update for Premiere Elements 9, it says "An error occured during download, quit and retry later"

    My PC works OK with dowload, but when I try to make an update for Premiere Elements 9, it says "An error occured during download, quit and retry later" - What can I do ?

    try a manual update,  http://www.adobe.com/downloads/updates/

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?  Please help me.

    I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi?     Please help me....
    Thanks in Advance.
    Neeraj@iDev

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • My iphone 4s suddenly has no sound whatsoever!! i have been using this for barely a month now, brand new. what's wrong with it???? but when i use my headphones, it works fine but when i took it off, it doesnt work anymore!!! grrrrr!!!!

    Ive been using this brand new iphone 4s for barely a month now and then all of a sudden, it lost its sound! but when i use my headphones, it works. when i take it off, it doesnt! grrr... what should i do?

    Yes my Iphone has done the same thing!!! I was listning to music then it just stopped.
    There is no sound coming from it what so ever!!!! I have tried eveything, i actually work for a mobile company and i on Ipone support and i know all the tricks but nothing has worked!!! Not happy at all!! Restoring to new dose nothing, the same as when i put it in to safe mode?????????

  • We are using SAP SRM to punch out external catalogs. Firefox version 3.5 and below works fine and the items from the catalogs are brought back to SRM .But when we use version 3.6.12 the items are not getting transferred back to SRM from the Catalogs.

    SRM is a procurement system from SAP which we use to purchase goods and service. We have external catalogs like officemax, cdw etc which we punchout the items and bring it to SRM for ordering.
    When we use firefox version 3.5 and below the items which we add from the Catalogs are correctly brought back to SRM for us to order. But when we use versions 3.6.12 the items are not brought back to SRM.
    Internet Explorer 7 and 8 works fine. Is there anyway you can help us.
    Thanks
    Jayant

    Hi,
    Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version  for SAP solutions. Many of your problem will get resolved with it.
    Question 1:
    So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
    For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
    Generate EarlyWatch report for more detailed view
    Question 2:
    My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
    The libttsh11.so library cannot be found in the related directory.
    Cause
    The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
    Such a configuration will cause, installation, relinking and other unexpected problems.
    Solution
    Disable the CIO option on the filesystem.
    References
    NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
    Hope this helps.
    Regards,
    Deepak Kori

  • My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

    My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How do I send am iMessage to a friend that has an iPad device? She is in my contacts but when I enter her name it won't work. Suggestions please??

    How do I send am iMessage to a friend that has an iPad device? She is in my contacts but when I enter her name it won't work. (*note she has no other apple devices.)

    Has she registered her e-mail address and/or phone number with iMessage? Are you using the same one that she registered?
    She should open Settings > iMessage and make sure that it's set up.

  • I have to backup of Gmail with Thunderbird Portable, so I could free some space on server - but when I use IMAP (to keep labels) after deletin on server...

    I have to backup of Gmail with Thunderbird Portable, so I could free some space on server - but when I use IMAP (to keep labels) after deletin on server...
    ...my post also deletes on Thunderbird. Please make an option to prevent it, so deleting on a server doesn't effect mail in the Thunderbird. I would be so happy to have it...
    David

    First Thunderbird portable is supported by its author at portableapps.com.
    Secondly you are describing exactly how the IMAP email standard works and Thunderbird has no control over that.
    Thunderbird has Local Folders to move messages that you want to keep locally. Maybe the portable version does too.

  • Every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

    every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

    I just spoke with Tesco technical support (having been transferred to them by Clubcard support), who told me that the problems people are experiencing when visiting the Tesco site via Safari aren't currently being addressed because "not enough people have called to complain about it".
    I asked what percentage of people he thought might make the effort to call instead of just giving up. He replied that he would be one of those who just gave up.
    So it would seem that if we would like the problem to be resolved, we each need to take a few moments to CALL TESCO and ensure our complaint is logged by the technical support team.
    Every voice helps

  • HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???

    HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???

    The work path is a vector object, and infinitely scalable, but when you stroke it, Photoshop lays pixels on a layer that follow the path.  These pixels are raster based and can not be scaled without loosing quality.  You do have options.  If you want to make the raster layer bigger, transform the work path and stroke it again.  Or work at a higher resolution in the first place.
    Incidentally, you can't stroke a Path with the Pen, because it is a Vector based tool, and stroking is a raster based function.

  • My Ipad screen was "fixed" but when I use it, the screen taps random things slides onto other apps . I see people saying do a reset but it never works..

    My Ipad screen was "fixed" but when I use it, the screen taps random things slides onto other apps . I see people saying do a reset but it never works. Plz help!

    Hi Barry1965,
    If you are having issues with the accuracy of the touchscreen on your iPad, you may find the following article helpful:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    - Brenden

  • Hi, what do i do if I receive an email with link but when I click the link my mail stop moving...

    hi what can i do if i receive an email with link but when I click the link my mail wont move anymore?

    Close the Mail app in the Task Bar and re-launch.
    Double-click the Home button to reveal Task Bar. Hold Mail app down for a second or two; tap the minus sign to close app.
    If it still doesn't work, try a reset.
    Hold the Sleep and Home button down until you see the Apple logo.

  • I got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i c

    i got a macbook pro 13 inch core i5  late 2011 , it came with osx lion  and i been using facebook videocalls normaly , now i updated to Mountain lion
    but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self  i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
    any ideas ?

    Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
    http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

  • I'm trying to open a PDF from Safari with iBooks, but when I choose "Open with ..." in Safari, only Pages and Dropbox show as options.  I'm running iOS 7.1.2 and iBooks 3.2.  Thanks for any ideas!

    On my iPad, I'm trying to open a PDF from Safari with iBooks, but when I choose "Open with ..." in Safari, only Pages and Dropbox show as options.  I'm running iOS 7.1.2 and iBooks 3.2.  I have rebooted the iPad and that did not help, and reinstalled iBooks, which also changed nothing.  Thanks for any ideas!

    Yup, it was uploaded to our school Wiki as a PDF, and Pages did open it.  I was then able to move it to iBooks, but I'd rather avoid the extra steps.

Maybe you are looking for

  • I have a book on my iphone that is no longer on my computer, how can i delete off my iphone

    I have music on my iphone5 that I want to delete and cannot because the file is no longer on my computer (PC), is there anything I can do about this?  It will not play on the iphone, but does show up.

  • Not able to create a new listener

    Tried to create a new 11g grid infrastructure standalone and it failed at configuration assistant and thereby asm was not created. I tried the netca manually to create the listener but not giving the error " the information provided for this listener

  • Music plays in iTunes, but not on iPod

    Bought an iPod Classic 120GB recently.  Roughly half of my music will play on the iPod, but all of it plays on my PC.  I have resynced multiple times and actually traded it in through the Apple store thinking that might be a quick fix.  Still the pro

  • Bridge CC not displaying video files

    Bridge CC not displaying video files - I just installed the new Bridge CC and I am unable to view and play my video files.  The files are Quicktime files.  The title of the file is displayed with a QT logo, yet no video is registered.  Has any one el

  • Is it possible to omit year fom birthday?

    I would like to include the birthdays of everyone here in my office. In other words, month and day. Some people will not want to have their birth year posted, and having iCal automatically append the current year is annoying( I can already hear the l