OS 10.4.3, BlackMagic DeckLink Extreme and Motion 2.1 filter creshes

Any update on what Apple or BlackMagic Design is doing about this issue?
Is there a site that gives update information about what is going on, or when we will have a solution?
Clemente

Things never work that fast in the release world. I think we just learned of this problem less than a month ago - I'd bet we get something in the coming quarter... But I'm not holding my breath.
Patrick

Similar Messages

Understanding the way to connect a MDD to BlackMagic Decklink Extreme card

Hi,
I require some help in the following:
I recently bought myself a Blackmagic DeckLink Extreme™ with 10bit SDI/analog video and audio capture card.
Looking at the specs, http://www.blackmagic-design.com/products/sd/specs/, can someone give me directions as to the best setup I can do from the following sources and what other equipment I may require to achieve it.
- mono stereo audio VHS -> has 1 video/audio in and 1 video/audio out (composite connections)
- stereo audio video camera -> has 1 8 pin S-Video out port to composite connections (Hi8 tape type)
- DVD player -> has composite 2 x 2ch stereo audio out, 1 x 5.1ch stereo audio out, 2 x video out, 1x component video out, 2 x S-video out, 2 x digital audio out; 1 x RCA/OPT
- 2 x 23" monitors connected by ADC and DVI connections to a Apple MDD G4, may relay to 60" Plasma for video monitoring from video card prior to creating DVD final piece for playback.
Basically, I wanted to have multiple source inputs and outputs, but I'm having difficulty in understanding the setup. Please refer to http://www.blackmagic-design.com/downloads/connections/decklinkdiagram.pdf page 5/6.
I purchased the following from JayCar
- 6 x PA3655 ADPT PLG RCA:
https://secure4.vivid-design.com.au/jaycar2005/productView.asp?ID=PA3655&CATID=& keywords=PA3655&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumb er=&priceMin=&priceMax=&SUBCATID=
- 1 x AC1668 SWITCH AV 3WAY:
https://secure4.vivid-design.com.au/jaycar2005/productView.asp?ID=AC1668&CATID=& keywords=AC1668&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumb er=&priceMin=&priceMax=&SUBCATID=
What other devices do I need to set up the equipment in the following way:
<pre>
Computer ------- Video In + Stereo In -----------> 3WAY SWITCH BOARD
| | ^ ^ ^
| | | | |
Bigpond |---- OUT ---> TV --------|-----|-----|
(Satellite Internet) | | | |
FOXTEL DVD VCR V/CAM
(Satellite TV)
</pre>
Currently I have not succeeded.
I have just done a simple test like so:
<pre>
Computer ------- Video In + Stereo In ---------> DVD (*)
|
Bigpond
</pre>
(*) Tested using the following:
<pre>
From Decklink -- Y IN (from deck) --> DVD Y port
-- B-Y IN (from deck) --> DVD Pb port
-- R-Y IN (from deck) --> DVD Pr port
-- SDI IN (from deck) ---> DVD Digital audio out
ASWELL AS
From Decklink -- Y OUT (from deck) --> DVD Y port
-- B-Y OUT (from deck) --> DVD Pb port
-- R-Y OUT (from deck) --> DVD Pr port
-- SDI OUT (from deck) ---> DVD Digital audio out
</pre>
Not one has seemed to work. What am I missing here?
Thanks
Tiberius
PPC MDD Dual Boot/Dual 1.25GHz Mac OS 9.2.x 2 x 23" Apple HD Display, 2GB RAM, 2x150GB + 1x1TB HD

pomme4moi wrote:
I want to buy a hard disk (not a NAS device) and plug it into my Airport Extreme in order to share data between two Mac computers, and to stream iTunes content to my Apple TV.
One option is to purchase a hard drive (say, a 2TB Hitachi G-Technology drive) and connect it to the USB port on the back of the Apple Extreme. The other option is to purchase a drive with an ethernet connection (say, a 2TB Lacie drive) and connect it to an ethernet port on the Apple Extreme.
In the second case what you'd have actually is a NAS. Apple's AirPort routers aren't known for fast file sharing. The NAS option might be faster.
Is either option better for streaming movies from the hard drive to my Apple TV?
I could be wrong, but an AppleTV may not be able to access content directly from a network drive. It may require that a Mac serve as an intermediary.

Help outputting using Panasonic AJ-SD955 / Blackmagic Decklink Extreme

Hello to all,
Anyone out there able to walk me through connecting and outputting to a Panasonic AJ-SD955 and getting a reference signal? I am using a Decklink Blackmagic Extreme Card and FCP 5.0.4. I've been capturing all night, literally , from the deck, but am unable to Edit To Tape/output. I need to black and code a tape and output with picture starting at hour 1. I do not seem to be getting picture or reference to the deck.
Picture shows up on my monitor when playing straight from the timeline when viewing via the Blackmagic card.
When I park on the timeline and push the record button on the deck and view via the deck, I have picture on my broadcast monitor.
The picture is jumping every few seconds, hence my thinking that I am not getting reference.
On the front of the deck the SDI light and Analog video are lit up. They are not flashing.
When I tried black and coding the tape timecode laid to the tape but no black.
When I try Edit To Tape nothing is going to the tape.
From the Blackmagic Card to the deck the connections are the following:
(14) Genlock is going into the top Ref. Video In -- The 75 termination switch is on.
Analog Composite Video Out is going to line B on my Sony monitor and provides the picture from the deck.
(16) Deck Control to Remote IN/OUT.
(13) SDI out to SDI IN on deck (top port)
(15) SDI in to SDI out on deck (top port)
If you need any other information please let me know. I am posting in several places in an effort to get an answer fast, because what would life be without deadlines? LOL!
As always, thanks in advanced!
Peace,
Lisha
www.badamitv.com

Awesome - the Out Ref fix did it!
When I did the edit to tape I tried both insert editing and assemble editing - both ended up the same.
On a side discussion - how do you sync the FCP machine with the black burst generator? I'm still a bit new to this - what exactly does the genlock do on the Decklink Extreme card? Is this where I sync with the black burst?
I assume the digibeta deck will also get synced with the same black burst generator. Does this go into the reference input on the back?
Thanks for your help,
-Grant

Outputting via SDI to DigiBeta thru Blackmagic Decklink Extreme

I'm running Final Cut Pro 5.1.2 on MacOS 10.4.8. I've edited a 23.98FPS - DVCPro50 sequence. I can preview using the Decklink Extreme card fine. I can output via compenent out to a regular beta deck (UVW-1800) just fine, which is also the deck I use for monitoring while I am editing. I plug the SDI output from the decklink card into our digibeta deck (DVW-A500). I also send the audio over SDI. I see both the audio and video in my digibeta deck. If I just PLAY the sequence out, the digibeta sees and hears it fine. No problems.
This is my problem. Whenever I try to 'edit to tape' it usually starts out fine... then I get A LOT of digital drop outs / squares / digital distortion on the digibeta. They come up randomly and it also digitally distorts the audio when you play the tape back.
The digibeta deck is fine, as we use it to output via our Avid Media Composers every day...no dropouts or problems. It has to be with FCP / DeckLink Card when you try an 'edit to tape'. I've also tried a 'print to video' with the same results. Have you guys heard of this problem at all? Hopefully you have a fix for me...
thanks.

Awesome - the Out Ref fix did it!
When I did the edit to tape I tried both insert editing and assemble editing - both ended up the same.
On a side discussion - how do you sync the FCP machine with the black burst generator? I'm still a bit new to this - what exactly does the genlock do on the Decklink Extreme card? Is this where I sync with the black burst?
I assume the digibeta deck will also get synced with the same black burst generator. Does this go into the reference input on the back?
Thanks for your help,
-Grant

Blackmagic decklink extreme 4k capture issues

I can't get my decklink extreme 4k to capture anything at all! All the settings seem fine. I know the card works and captures in it's own software, but not in Premiere CS6. Nothing shows up! HELP!

YOu won't if you don't have the Decklink drivers installed...
Shane

Blackmagic intensity extreme and adobe FMLE 3.2 question

I have been having some serious issues. FLME 3.2 keeps crashing when I have the capture device set to blackmagic intensity extreme. I am using 720p HD 59.94 as my settings.
If it is the settings how do I go about bringing it down to SD? I do not think there is a lower setting on my camera.
I am unhappily using a Sony Handycam HDR PJ200.
I would like to be using my Sony Evi D100, however those breakout cables on my blackmagic are very confusing.

Anyone know the answer to this?

5.1 audio suggestions for FCS2 with a Decklink Extreme and Mac Pro?

I'm using a Mac Pro with Final Cut Studio, and I'm wondering if I can get 5.1 sound out of the decklink card. When I use a Firewire interface (M-audio firewire 410) to output audio, it is out of sync with the video coming out of the decklink card. So I guess the alternative is to find out how to get AES/EBU to output the 12 channels it says it can do in HD. I can't afford an HDCAM deck with 12 outputs, so how would any of you suggest I go about doing something like this? I really just want to get 5.1 going and in sync for the Final Cut Studio 2 release.
Thanks so much for any help!
Bob Stovall

Hi Bob,
I'm using a Mac Pro with Final Cut Studio, and I'm
wondering if I can get 5.1 sound out of the decklink
card. When I use a Firewire interface (M-audio
firewire 410) to output audio, it is out of sync with
the video coming out of the decklink card.
See my response to your other post on this. Note that M-Audio is not famous for excellence with Core Audio drivers.
So I
guess the alternative is to find out how to get
AES/EBU to output the 12 channels it says it can do
in HD. I can't afford an HDCAM deck with 12 outputs,
so how would any of you suggest I go about doing
something like this?
The Decklink AES/EBU hardware output will only source 2 channels of audio. If you have the 410, just use that with your audio software and set up the offset as I previously described. Plug its analog outs into your surround controller. It's very straight forward and you shouldn't have too much trouble.
If you tell us what audio software you're intending to use to produce your soundtrack, we could probably be more helpful.

CLoud Premiere Pro and BLackmagic Decklink

I,
I've installed the last driver Blackmagic Decklink extrem 3 but I've no output from Premiere Pro...

Am moving your discussion to the Premiere Pro forum. The experts here are better placed to help you.

Capturing device offline with BlackMagic DeckLink Quad

Hi guys,
I have a problem capturing with a BlackMagic DeckLink Quad and Premiere Pro CS6. Capturing with the Blackmagic included Media Express software works fine. However, Premiere Pro tells me that my capturing device is offline.
What I did to run the capture:
Open Premiere Pro CS6
New project --> set capture to Blackmagic capture --> press ok
New sequence dialog --> select format exactly like specified in system control panel of BlackMagic (1080 25p).
Open capture dialog with F5 key.
Tells me that the capturing device is offline.
Controlling capturing properties for Blackmagic Capture and ensuring that they match the system control panel specs and the specs used in the other software(1080 25p, Video Format: Motion JPEG)
Final State --> Premiere Pro still tells me that the capturing device is offline and I have a black window.
I read somewhere that the installation order of driver and Premiere Pro is important, therefore I tried already both constalations (Driver, Premiere Pro - Premiere Pro, Driver ) without any success. A driver update of the Declink Quad did not have any effect.
Driver version:
Blackmagic DeckLink SDI - Date: 22.01.2015 Version: 13.4.10.868
Any help would be highly appreciated.
Best

Yes, Component is indeed not a better quality... Interesting because I did plug into a flatscreen, and I have nothing as well... So maybe it is the component out of the z1u that is not even working! Will try with another cable in case, but that may be the answer... Thank you for pointing that out! didn't even think about it...
I'm really trying to capture old HDV tapes, and always get those phantom breaks with Firewire (using another deck since it's broken on the z1u), now I'm wondering if you get less breaks doing 1080i or ProRes?? Although files are way bigger.

Will FME work with BlackMagic Decklink card?

Has anyone used this combination of components together? I want to capture SDI and might have access to a Decklink card, and I only use FME 3.2 so want to be sure they'll work together before I spend the money. Thanks-

I'm using BlackMagic DeckLink Duo and it works fine.

Playback Issues with multiple framerates and Blackmagic Decklink 4K Extreme

I recently swapped by AJA Kona Card for a Blackmagic Decklink 4K Extreme in order to get external monitoring in DaVinci Resolve.
I'm working in a 1080p 23.976 project that includes some 29.97 SD and HD footage. When loading this 29.97fps footage into my source footage, I periodically encounter frozen playback (The play triangle in my toolbar becomes a square symbol and remains that way). From there I am unable to playback any footage in any timeline, and requires a full system shutdown to return to normal! The problem is seemingly intermitent, with successful playback happening sometimes.
The 29.97 footage was DVCPRO, I attempted to transcode to Prores to troubleshoot. No dice. I believe it to be an issue related to the Decklink's inability to handle multiple framerates on-the-fly but wanted to submit here, too. I've also experienced intermittent sync delays on my broadcast monitor.
Decklink Driver 10.0
Premiere CC 7.2.1
Mac OSX 10.9.2 (same problem pre-mavericks)

Hi Andy,
You should not have any issues with Blackmagic handling multiple formats on the fly. However, I believe the frozen playback issues your describing is related to the Desktop Video 10 driver. I suggest rolling back to 9.3.3 for the time being. Blackmagic is looking into this issue now.
Best,
Peter Garaway
Adobe
Premiere Pro

Can't playback on Blackmagic Decklink HD extreme 2

Hi all,
I am looking to crossgrade from FCP7 to Premiere CS6 so I have the Master Collection Demo installed on my work station along with FCP. It's on a 2008 Mac Pro with 2 Quad core 3.2G Intel Xeons, 16GB ram, ATi 2600 HD 250mb graphics and a Blackmagic Decklink HD Extreme 2. In the FCP set up this card fed a full HD JVC broadcast monitor via HD-SDI and I had no trouble with it at all and it played any type of sequence. My problem is that I can't for the life of me get a picture on the screen in Premiere. No combination of BM sequence settings or codecs, either BM or otherwise, seem to get it going. Output options seem extremely limited in the application set up with only one box to tick under the playback menu. This seems to have no effect whatsoever. The aplication can obviously see the card because the option to check it as a playback is there and the audio routes through without error. I have installed the latest Premiere updates and am running Desktop video 9.6. AE plays on the monitor fine but nothing in Premiere unless I switch the BM card to extended desktop and use the broadcast monitor as a second LCD and tick that option under the playback menu but then my GFX card seems to struggle and drops frames all over the place. I admit the ATI card is a bit of a slouch but options were limited for Mac unless you want the high end cards, which I am considering, could the fact the card is under powered have anything to do with video not getting to the BM card. I don't know much about the MPBE apart from the fact my card doesn't qualify.
Any ideas on how to proceed would be greatly appreciated.
Apart from no client monitor I'm loving Premiere, I'm finding th realtime stuff quite refreshing after FCP, which was a bit of a joke really in that area...but if I can't monitor, I can't make the switch.
Thanks in advance.

Hello,
You don't need to use the blackmagic presets to play back through your card. What are your settings under preferences>general?playback? You might want to try uninstallig the blackmagic presets and installing the latest Deskstop from BM. The uninstall option will be available when you download BM Desktop from their support site. Having the latest version isn't what is important but uninstalling is.
Cheers,
Gerry

FCP, Beta SP and Blackmagic Multibridge Extreme capture card

I'm having problems getting a video signal into FCP via a Multibridge Exteme capture card by Blackmagic Design. I currently have device control and am able to view footage already in FCP on an NTSC monitor so it appears as though the capture card is working. I have my capture setting set to blackmagic NTSC-10 bit (i've tried several different settings). I have the deck connected to the card through the component ports. Here are the specs on what i'm working with:
Mac Pro dual 3.0GHz Xeon
10 GBs of RAM
Blackmagic Multibridge Extreme capture card w/ breakout box
Sony PVW-2650 Beta SP player
FCP 5.1.4
Quicktime 7.1.6
OSX 10.4.10

Under System Preferences go to the Decklink Preferences.
Change the input from SDI to Component and XLR audio
Problem solved.
Phil

Premiere CS4 4.1 and Blackmagic Decklink

I've loaded CS4 4.1 along with the latest Blackmagic Decklink 7.2 update software. I can see my timeline playing on my production monitor but I have no audio. If I load a clip into a new project using just the DV-NTSC 4:3 option then I get audio but I don't see my playback on my production monitor. If I select new project and select the Blackmagic DV-NTSC 4:3 option then I see the playback on the monitor but I get no audio. I've tried to change the preferences in CS4 in the audio section to recognize the Blackmagic Audio output and still nothing. I've checked the Blackmagic audio drivers on my machine and they are recognized. Anyone have similar problem or ideas how to fix. Greatly appreciated.
Thanks

Have the same exact issues in our rig. Have the HD Extreme 3, with with our P6T7 WS SuperComputer MoBo with the intergrated SoundMAX HD audio and the Bose Companion 5 multimedia speaker system. I have contacted BM about this. Their support has been terrible to say the least. I have sent a couple emails in the past week with no response. I should have gone with the AJA Kona but thats another story. Our issue, which is similar to yours:
(my email to BM)
We have the HD Extreme 3 and we just purchased a Panasonic BT-LH1710 LCD reference HD monitor. We have it connected via BNC in the SDI on the monitor and out of the Extreme card in the first BNC slot (closest to the breakout cable input). We just shot footage with the Panasonic Varicam 2700 and if we choose DVCPROHD 720p from the presets in Premiere 4.1, we can view the material that is in the source monitor on the Panasonic but once we put on the timeline and thus program monitor, we cannot see the footage on the Panasonic reference monitor. If we choose from the Blackmagic presets it does work. Do we have to use the Blackmagic presets for our footage to be seen on our Panasonic monitor even though we should be using what we shot in, which in this case was DVCPROHD 720p 24fps P2?
-Answer to this from what I gathered from others is: "You must always use a Blackmagic Design preset when you create a new Sequence. You will never ever get any out put from any other Timeline" Which I really don't know how that effects the project when cutting, if at all since we are not capturing from the card (thus using BM's CODEC but rather, using footage shot from our Panny P2's.
Second issue is audio, even when using the blackmagic presets, we cannot hear audio. I have the settings all correct in Premiere and can see the levels moving, just can't hear anything out of our speakers. The audio works fine with our speakers in every other preset but Blackmagic's (if we choose Premiere Pro Sound as the Audio Hardware and Audio Output Mapping). Once we switch to Blackmagic, we do not hear any audio.
-Answer - I have tried everything and am still unsuccessful and getting audio to play out o our BOSE speakers. It does play (not well) our of the Panny reference monitor but am still searhing for a solution. Under control panel for audio, it does show blackmagic audio and working but nothing as of yet. Kind of driving me crazy.
If you read the third post down http://forums.adobe.com/message/1989667#1989667 from Roger he kind of touches on it but still doesn't solve the issue.
I'd be interested to hear if you have a solution or really anyone has a solution.

Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

Hi !
I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
I can ingest audio with video using log and capture, then I know my card and my cables are working.
I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
I've been looking on the BM website, but I found nothing.
Can you help me ?
Thx

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

OS 10.4.3, BlackMagic DeckLink Extreme and Motion 2.1 filter creshes

Similar Messages

Maybe you are looking for