OS 10.4.5 and Epson Photostylus 750

I have just upgraded my G3 Pismo Powerbook to run on OS 10.4.5. So I downloaded the relevant driver for the Stylus Photo 750 from the Epson website and installed it. I printed a document, selecting the Stylus as the printer. The document spooled to the printer and shows in the Epson 750 window, but then states 'Jobs stopped'. If I click on 'start jobs', there is an attempt to print the document and again I get 'jobs stopped'. The printer itself does nothing - the power light does not even flash. Any suggestions?

There are tons of posts on similar problems in this forum. Do a search for stopped jobs and you'll see. There are a lot of suggested fixes, it sounds like some work for some people and not for others. Also, although it sounds like it's usually Epson printers, it's not always. And it's all different models. I have an Epson Stylus CX6600. I haven't had a chance to try all the fixes yet, but one that did work for a couple months for me was this:
Before printing, go into your application's "Page setup" option and make sure that the "Format for" says your printer and not "Any printer." I'm not sure why this works but it's even on the Epson tech support website in their troubleshooter. You will have to do this for every application and it quit working for me after I updated to 10.4.5, but maybe it could be a temporary fix for you as well.
Please post if you come up with a more permanent solution!

Similar Messages

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • I have an HP Photosmart 8200 and and Epson Artisan 800 printer and neither one is showing up in my printer selection any more.  How do I get these back?

    I have a MacBook Pro that came with Mac OS 10.7 Lion on it, and had been printing on both an HP Photosmart 8200 and an Epson Artisan 800.  I had an issue where I would print from Photoshop and every time I would print I'd need to make a new printer.  I don't think that it was ONLY WAY, but it worked for me.  Anyways, I finally got tired of scrolling down the list to choose the new printer  – HP Photosmart 8200_23 – or something like that, so I deleted some of the printers that had extra numbers.  This is where the print Print & Scan dialog in the system prefs has the little plus and minus.  It turns out that I pressed the minus on everything - going overboard with my clicks.  Now, I have NO PRINTER and each time my computer tries to download drivers from HP and Epson, they have no updates for me.  When I go on there website there are no drivers for Mac 10.7.  I have no idea how to get my printers back.  Any ideas or assistance would be greatly appreciated.
    Thanks,
    Erik Jurado

    Download the HP drivers here:
    http://support.apple.com/kb/DL907
    Download the Epson drivers here:
    http://support.apple.com/kb/DL1398

  • Photoshop CS3 and Epson printer

    I have PS CS3 with an Epson 4000 running on windows XP. I know Adobe is aware of a problem in which under some circumstances, (when you use roll paper) PS will print a smaller image off center and displaying in the interface the portrait mode despite me clicking landscape. I also know Adobe has a technote that offers solutions (I am already using version 10.0.1 with Bridge 2.1.1.9. Also solutions 2,3, and 4 on the tech notes have not worked. I tried different combinations and permutations of settings to no avail. Now I work on CS3 on the image, save it, and print it on CS2 which I kept on my computer, and has no problems printing. Can you please keep this as an on-going problem, since it has not been solved yet? Any feedback on this? There are a lot of Epson printer out there, and printing for a photographer is absolutely important. Thanks.
    Ed Kneler

    Have spent hours with both Adobe and Epson support people. I've read several of these forums. Is there an insurmountable problem with CS3 and Epson (2200/2400 are mine)? I have the Leopard patches and upgrade 10.5.4.
    With Photoshop managing the color I get prints that are slightly underexposed and carry a pink cast. Color management is off. With the printer managing the color I get prints that are too green and dark. Epson advice here is to have color management off. There are two other choices for management but to adjust a perfectly balanced print to the printer's whim seem like cruel punishment.
    Have a calibrated monitor and my CS2 works beautifully. Perhaps the best idea is to just go back to CS2 until Adobe and Epson can decide what to do. According to Adobe people, the CS3 gives much of the management back to Epson. According to Epson -- with CS3, you should choose the printer to manage the color (since this seems to be the trend between the two companies) but we users are not happy with the results.
    What is the solution for right now?

  • Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

    Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
    System: Windows 7
    Adobe CS5
    Printer: Epson Stylus Photo 1400
    Paper: Inkjet matte presentation paper with slight luster
    Installed latest patch for Adobe CS5
    Epson driver up to date
    After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
    The files I am printing are photographs of dogs with lots of detail  I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
    My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
    Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
    When I change to these settings in printer window: Color Handling:  Printer manages color.  Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
    Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
    Also I am confused as to what ICM color management system to use with this printer and CS5:
    What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
    Do I embed the ICM I choose into the new files I create? 
    Do I view all files in the CS5 workspace in this default ICM?
    Do I set my monitor setting to the same ICM?
    If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
    Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
    Is using the same ICM for all devices what is called a consistent workflow?
    I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

    It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
    I hope this may help...............

  • Color Management, Photoshop CS3 and Epson Inkjet Printer

    I have been down this road before but here goes again...
    Im using Photoshop CS3.
    Im printing on an Epson Stylus Photo RX680 using Photo quality inkjet paper.
    I know this printer is capable of very good quality prints.
    Thing is I can not figure out the correct combination of color management settings to get a decent print out of Photoshop or InDesign.
    I have read that you are supposed to turn off all printer color management and let Adobe manage the color. Doesnt seem to work.
    I just get overly magenta images that look awful.
    If I let the Epson color management control color I can get a lot closer but the print out is far from accurate or high quality.
    So what the heck IS the correct protocol for printing to an Epson inkjet printer from an Adobe app.
    BTW, I do seem to get a fairly decent print out of something like a PDF which I understand does its own postscript conversion before hitting the printer.
    Is this what my issue is?
    Does Photoshop or InDesign require postscript ripper software to get decent results out of an inkjet printer?

    Have spent hours with both Adobe and Epson support people. I've read several of these forums. Is there an insurmountable problem with CS3 and Epson (2200/2400 are mine)? I have the Leopard patches and upgrade 10.5.4.
    With Photoshop managing the color I get prints that are slightly underexposed and carry a pink cast. Color management is off. With the printer managing the color I get prints that are too green and dark. Epson advice here is to have color management off. There are two other choices for management but to adjust a perfectly balanced print to the printer's whim seem like cruel punishment.
    Have a calibrated monitor and my CS2 works beautifully. Perhaps the best idea is to just go back to CS2 until Adobe and Epson can decide what to do. According to Adobe people, the CS3 gives much of the management back to Epson. According to Epson -- with CS3, you should choose the printer to manage the color (since this seems to be the trend between the two companies) but we users are not happy with the results.
    What is the solution for right now?

  • The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't work.  All software is updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

    My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini.  I have to physically disconnect the HP and then reconnect for the Mac to find it.  Turning off the wireless Epson doesn't resolve anything.  All software/drivers have been updated.

  • I use MACBOOK , APPLE AIRPORT AND EPSON PRINTER. I AAM GETTING MESSAGE "PRINTER OFFLINE". PRINTER WORKS WELL AND INTERNET WORKS WELL. How can I get printer to respond

    I use a macbook, apple airport and epson printer. After several printer jobs, I get a message "printer offline". I have tried restarting computer. restarting printer and still cannot connect, I can print directly with a USB cable. How can I connect to my printer via the airport?

    Delete the printer in System Preferences and re-add it. You may also want to restart the Airport.

  • HT4356 What printers beside HP will work continuously with an i-pad?  I tried Canon and Epson and both time-out after a short time, requiring the user to re-initialize.  This defeats the idea of a wireless printer,  Thanks Art

    What printers besides Hp will work continuously with an i-pad?  I tried Canon and Epson and both time-out after a short period of time rerquiring the user to re-initialize, which defeats the purpose of wireless printing.  Please help, Apple can not.  Thanks to all.  Art

    Canon support told me that the I-pad printer driver would not work with any printer, including HP.  They offered to fix the problem for $50.  I turned them down.
    If they really could fix the problem, they must be saying to update the printers firmware. Look on the cannon website & update the priners firmware.  While you at it, update the routers firmware.
    What printer do you have?
    List of supported AirPrinters.
    http://support.apple.com/kb/HT4356

  • Photoshop CS5 and Epson 9900, Win 7, 64bits

    Hi,
    I recently upgraded from photoshop cs3 to cs5 and now all of my prints on epson 9900 large format printer come out too dark. The same pictures printed with cs3 look good but not on cs5. How can I fix it? Is there a patch for this issue on Adobe website? Just to clarify: same image printed on CS3 looks good but printed with CS5 looks too dark. It can't be the printer driver issue since there is one driver for both version of Photoshop (6.62, most recent).
    I have Photoshop CS5 and Epson 9900, Windows 7, 64bits.
    I have "Photoshop manages colors" selected and "no color management" for printer - I know the proper set up, I've been doing this for quite some time, so it's definitely not the settings issue or media profile issue. Well, the same settings are use with CS3 and CS5 but results are different, that's why I think it's photoshop's fault. If I can't print color managed prints than CS5 is useless to me.
    Any ideas? I have seen post reg. this but no solution and they go back few years back. Has Adobe finally addressed the issue?
    Please, help.
    Peter,
    http://www.canvasandprints.com
    http://www.abovesigns.net/

    Hi Chris,
    I have the latest patch 12.0.4 but it does not solve the problem. What kind of "user error" are you talking about? As I stated before: I use the same settings in both version of PS: photshop manages color, printer profile: my canvas media profile, BPC: on. In print settings: mode: custom (off, no color adjustment), media type: my canvas type. There is no room for "user error" here.
    As for driver bugs: are you referring to Epson driver? I have the latest driver v6.62. What else can I do? Did i skip something?
    Well, of course I'm using Windows (64bits), so I guess there is lots of room for error there, right , but I don't think it's OS since it prints fine in CS3 but not in CS5.
    Any suggestions will be appreciated.

  • OSX Lion and Epson perfection 2450 scanner

    After having upgraded to Lion, i cannot run the utility by espon to use my Epson perfection2450 scanner.
    Shall i throw the scanner away or there is a way to use it?
    Wich program shall i use to scan my pictures?
    I'm worried!
    thanks

    Wayne of America wrote:
    I too have an Epson scanner and Epson's scanner software no longer works.
    Lion's Preview application allows me to scan (Preview>File>Import from Scanner) with very good options and functionality.
    I was in the same boat with my Epson 4180 scanner.  Luckily your little trick saved the day and I was able to get something scanned and printed through Preview.  I had previously spent a lot of time downloading and installing the updates which did no good, Lion still won't let me use it.
    Then I read about opening it through System Preferences and thought I'd found the answer, but that didn't work either.  Thanks for your post as it was very helpful to me.

  • Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

    Seeking help with PS Elements 11 which does not work with Epson r2000 printer.  Epson tech support could not fix, said it is PS e11 problem.  Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct.  Have set PS to manage color and printer manages color to off.  Would appreciate any suggestions.  Thank you.

    Hi,
    Sincerely appreciate your help.  Running Windows 7 on a  Dell XPS420.  System has been very stable for years.  Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems.  The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints. 
    Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
    Will let you know how things go.
    Richard
    Date: Thu, 12 Sep 2013 19:47:38 -0700
    From: [email protected]
    To: [email protected]
    Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
        created by Barbara B. in Photoshop Elements - View the full discussion
    What operating system are you using?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Photoshop Elements 10 and Epson xp-810 Printer

    I just purchased an Epson XP-810 printer.  I can print from Photoshop Elements 10 just fime.  I need to know how to set the printer up so I can import from its scanner.
    Can anyone help me with this?

    Thanks!
    Date: Mon, 25 Nov 2013 20:14:45 -0800
    From: [email protected]
    To: [email protected]
    Subject: Photoshop Elements 10 and Epson xp-810 Printer
        Re: Photoshop Elements 10 and Epson xp-810 Printer
        created by Barbara B. in Photoshop Elements - View the full discussion
    In PSE you need to install the TWAIN driver:
    http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop -elements-11.html
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5874804#5874804
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5874804#5874804
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5874804#5874804. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Elements at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Photoshop CS3 and Epson R2400

    Since I installed Leo on my Mac Pro, my R2400 will not work as it used to. I can not access the printers option menu where I can setup the paper, printer resolution, etc. When I am printing out of photoshop CS3 I will only get a standard printer menu provided by Mac OS and not by epson. I can´t change any settings and the prints come out terrible. I use the latest Epson driver - 6.12 - but nothing works as it should. Does anybody experience the same problems or might have a solution for this? I got plenty of print jobs to do before christmas! Thank you for any hints ... Jochen, Germany

    Jochen,
    I managed to get my 2400 printing OK now. I spent a completely wasted hour e-talking to Epson UK Support yesterday. They offered nothing useful and spent all the time telling me to do obvious things, which was very frustrating. Then I decided to go back to basics. I ditched all the personalised settings in all the print dialogue boxes and tried printing with only basic settings. I had professional print profiles for each of my papers and printers, but none of these will now work and I think that they were the crux of the problem.
    This is what I did:
    Step 1 - I turned off my printer. After ditching the entire Epson folder from the library and restarting Leopard, I downloaded the current Mac drivers from the Epson Support website and started by reinstalling the 2400 from scratch. I turned on my printer. I ran the downloaded installer and then went into Apple/Preferences/printers and faxes and removed the 2400 that leopard had installed with the gutenburg driver. I then installed the 2400 again through this screen and checked that the downloaded Epson 6.12 driver had installed. It had.
    Step 2 - I went to page set-up for the photo I wanted to print in Photoshop CS3 and in Format For: I selected Epson Stylus Photo R2400 and in paper size: I selected A4 (sheet feeder - borderless) and clicked OK
    Step 3 - I selected File/print. In Printer I selected Epson Stylus Photo R2400. In colour handling I selected Printer Manages Colour and in Rendering Intent I selected Relative Colorimetric. The I pressed the Print button.
    step 4 - I then pressed Proceed in the larger than paper dialogue box taht then appeared and this closed.
    Step 5 - This brings you to the Epson Printer Dialogue box. I selected the Print Settings section and selected Premium Glossy Photo paper as the Media Type. In colour settings I selected Epson Standard (sRGB). and selected the Advanced radar button below and best photo as the print quality. When I pressed print I got a good quality print....and it seems to work every time now!
    I have also tried this with my Epson 950 and it also works. In fact I am getting better prints with this one than I was before Leopard!
    Don't ask my why it is working this way. I don't know. I used to let Photoshop CS3 manage the colour using my profiles, but this will not work now. I suspect that as my profiles were done in tiger they are Tiger dependent. I will contact my supplier next week and discuss this with him. I am still disappointed that I seem to have lost complete control over my printing and blame Apple and Epson in equal measure. From my "discussions" with Epson support it is clear that their "fix" is aimed at the amateur user and not those requiring control over the production phase!
    I hope this helps.
    David

  • Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print. It did until quite recently . Now I get Filter failed and RastertoescpII when i try to print ( test sheets ok) . Have tried to to uninstall and reinstall but nothing. Any advice, please.

    Question ?
    Macbook Pro OSX 10.8 and Epson WF 7525 will no longer print.
    It did until quite recently . However now I get filter failed and RastertoescpII and pages of items when i try to print .
    Print head test sheets/head cleaning etc ok  .
    Have tried to to uninstall and reinstall but nothing.
    Any advice, please?.
    ps
    The printer deos not show up on Epsons site but i think I have the software from Apple.
    Not an ideal situation.

    Try a reset >  OS X Mountain Lion: Reset the printing system

Maybe you are looking for