OS 10.4.6. has broken dialup connectivity when using fast user switching

I installed OS 10.4.6. It seems to have broken dialup connectivity when using fast user switching when switching from one user to the next.
For dialup, it is extreamly annoying that I can not resume downloading a file from were it got cut off, but now, if another user wants to check their email, my download always gets broken and has to be restarted. Dialup is slow enough with out having to start from scratch even more frequently, now.
Also, in earlier versions of 10.2 or 10.3 (I don't remember which), I was able to switch users and maintain listening to a single users' iTunes.
I would like to be able to switch users and not lose either my dialup network connection or the primary users currently playing iTunes songs.
Perhaps for iTunes, one should be able to chose to mute another users' instance of iTunes, if it is currently playing.
Mini-Mac 1.42GHz 80GB BT/AE Mac OS X (10.4.6)

I have not tried replicating this but might be able to provide some additional information.
We use network login accounts on our desktop computers. Fast User switching deliberately will not work for multiple network login accounts. (Remember network login accounts normally also have an associated network home directory mounted via AFP.)
Now a bit of background about volumes and mount points under Mac OS X. Under Mac OS X, any additional drive (or more accurately 'volume') is listed under the 'Volumes' folder, remember also that Mac OS X is a Unix operating system. So just as normal for Unix, the boot drive is '/' or the root level and Volumes is a folder in it. The underlying Mac OS X software automatically 'attaches' and additional volumes as sub-folders in the 'Volumes' folder (in Unix speak these are called 'Mount Points'), if you have an external hard-disc called 'Fred' then this would be represented by the following path
/Volumes/Fred
If you happen to have two volumes with the same name connected at the same time then while in the Finder they may show up with the same name, in Unix they would have different names automatically assigned to keep them separate like so
/Volumes/Fred
/Volumes/Fred 1
Now getting back to the Fast User switching problem and AFP volumes, when you login to a File Server volume it also is automatically added to the Volumes folder, so if we have a File Server volume called 'Shared' it would look like
/Volumes/Shared
With Fast User switching potentially both user accounts could be accessing the same /Volumes/Shared which means both user accounts would be talking to the server via the same File Server login, hence the possibility for one of the Fast User accounts to be using the 'wrong' permissions.

Similar Messages

Shared Disk - can't connect with Fast User Switching

Hi,
I've created a Disk on my Time Capsule, and shared it via "File Sharing", it's secured "with a disk password", and is working well ... sort of. I can connect to it with no issues, and so can my wife via her MacBook Pro. However, if I'm signed into my account, and she accesses her account using Fast User Switching, she can't connect to the shared volume. She has to Disconnect, and then reauthenticate, and after doing so, I can't connect to the shared volume. I must Disconnect, and reconnect. Why is this? Is there an authentication file that's set up some where on the root of the shared computer, that's preventing us from being able to signin to the shared volume? Or is something broken?
Thanks!

Complete uninstallation and reinstallation of network adapter drivers has been reported to resolve this error in some cases. Open
Device Manager and select Show Hidden Devices from the
View menu. Expand the Network Adapters category and delete all drivers under this category. After the devices are removed right click and select
Scan for hardware changes.
Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

Screen has a bluish tint after fast user switching and then warning tone

Hi all I'm having a bit of a problem that I hope someone can help me with. First the details, I have a MBP bought in late '07 and running Tiger. I was doing full backups using "Backup" and I also had Safari, iTunes, and Word open. I briefly switched to my other account using fast user switching and when I returned to the original account the whole screen had a blue tint to it. Like the color profile was off. This has happened before and a restart usually cures it, I haven't restarted yet but I am fairly certain it will correct the problem this time too. But is there anyway to prevent this? My second question is the one I'm more worried about. It also has happened before but usually when using more CPU intensive applications. When I went to System Preferences and opened up the display preferences in an attempt to correct the previous problem I heard a very loud tone. Like some type of warning tone, it was loud enough that it startled me. I had iTunes playing and after the tone the music got very quiet but relaunching it brought it back to normal. I'm just wondering is this some type of warning tone? Is it something I should be concerned about? Besides the music everything else seemed unaffected, although the previous times that this has happened usually when using handbrake there was noticeable problems after the tone (like applications crashing). All of these problems are gone after the computer is restarted though. Does anyone have any insight on these issues? Thank you.
-James

OK I ran TechTool and everything passed except for the volume scan. Then I checked this with Disk Utility and the HD failed for a few minor reasons, like invalid block count. I repaired it using the fsck -fy command in single user mode. The computer seems a little faster now. I don't know if this error is related to the beep in any way, I may try talking to an Apple genius to see if they know. Since it seems like pretty minor errors I'm not too worried about it but it does seem to be happening often. The last time I had this error was when I posted a question here about it which I just checked was on March 1st. So this error happened again after a little more than 2 weeks which seems excessive to me. Any thoughts?

Scan / Fax won't connect - check Fast User Switching

I posted in troubleshooting that I had connection issues with scan and FAX setup. I went into Control Panel (Windows XP), User Accounts, and disabled Fast User Switching. Seems, if this is enabled, folder sharing is disabled, and scan and FAX use this service.

Hi,
6. I'm pretty certain my computer has never been worked on, but... I don't have a serial number in the "About this mac" screen. I can't remember, perhaps I bought the computer refurbished from Apple...but it's never been into a store for repairs.
So, how likely is it that this is related to the serial number thing? Are there other things I can test that would confirm or at least support this theory?
If so, does this mean everyone with a missing serial number can't use messages?
Judging by the people who have posted that they 1) Had the missing Serial Number and 2) got it fixed it would seem that it is important.
There are some more recent threads/posts that suggest that at least for a time some people with version 7.0.1 of Messages (Came with OS X 10.8.2 Update) had the iMessages account working for them.
It seems that FaceTime and GameStation also seem to use the serial number in verification.
You could test those.
10:25 PM Wednesday; January 9, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

LabView 6.1 crashes now and then when I try to get rid of an accidential starting connection when using the wiring tool.

Sometimes when using my labtop it happens that I get unwanted connections when using the wiring tool because my labtop notices mouse clicks that never happend. Usually you can get rid of those connections by pressing ESC. But unfortunately now and than LabView crashes completely when pressing ESC to get rid of the connection.
How can I stop LabView from crashing in that case?
Thanks for anybodies help!

Yes, I see this problem on both my LabView-Computers but more often on the labtop because of the strange integrated mouse.
Yes, I get an error message but I can't really translate it in english. It says something about memory access to a special address.
I might try reinstalling LabView one day if I have the time. I don't want to try LabView 7.0. I'm afraid it would be great. Unfortunately my boss alreday told me, we don't have money for the new version.
Thanks for your help!

PLEASE HELP!!!---MY ADMIN USER HAS NO "FAST USER SWITCHING"

THER IS NOT A BOX TO CHECK FOR IT IN THE "LOGIN ITMES"-- UNDER ACCOUNTS. I have the lock --unlocked and it's just not there as an option to check--HOWEVER ther other user have it and can switch---It just really *****, because I as the administrator user has to log out and quick applications before another user can logi in---PLEASE HELP ??????????????????

arri:
Let's try this again.
*Go to the Apple Menu and open System Preferences.
*Click on Accounts.
*If lock is locked click on lock and authenticate.
*Click on Login Options
*Now look almost directly to the right of Login Options (just two lines up) is a checkbox with the words "Enable Fast User Switching."
*Check the checkbox.
Good luck.
cornelius
PS: Writing in all caps is considered shouting. Most people who post questions are frustrated with their issues. However, the rest of us are trying to be helpful, and shouting does not make it either easier or faster.
PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X (10.4.5) Mac OS X (10.4.5) Beige G3 OS 8.6
Message was edited by: cornelius

Broken Pipe Error when using database link

We are using WebLogic 6.1 sp2 / oracle database 8.1.6. / thin drivers.
The connection works fine, unit I try to access a view that has a union and db links
in it.
We have used one or the other (view or a dblink) and it works, but when used together,
we get broken pipe error.
I haven't proven that this is the cause, I will try to setup a test, but I was wondering
if this is a known issue or what ??
thanks
Rich

You need to create the catalog views that support distributed SQL in your remote database (the database you connect to via db_link).
To create these views, connect "/ as sysdba" and run:
$ORACLE_HOME/rdbms/admin/catproc.sql
which will in turn call several other scripts including: $ORACLE_HOME/rdbms/admin/catrpc.sql (which creates your missing view)
It is best to run the whole catproc.sql script (and not just the catrpc script).
You can run and rerun catproc.sql several times quite safely.
Cheers

Often lose wireless connection when using HDTV as monitor

I have an unusual wireless networking problem when using my Samsung HDTV in my living room as a monitor for my MacBook (when watching Internet TV shows, for example). Frequently when I switch URLs, networking freezes, even though the connection appears strong, with the Airport symbol at the top of my screen showing all bars. To re-establish the wireless connection, I have to go through the process of re-joining my network through the “Join Other Network" option. The signal holds as long as I don’t try to change it, as in selecting another URL.
I connect to my HDTV via HDMI cable, using a mini-DVI to HDMI adapter from my Macbook’s video-out port. The audio connection is a mini-plug from the Mac’s headphone out jack to stereo RCA plugs associated with the TV’s HDMI port.
The wireless connection is through a Lynksys Wireless-G 2.4 Ghz, 54 Mpbs Broadband router.
I’d appreciate any solutions the Apple user community has to offer.

I'd say this has nothing to do with your display. The problem will likely lie in either your router settings, network settings or a simple signal strength issue. Try first changing the broadcast channel on your router, and make sure all settings are correct for your desired network.

Is anybody else struggling with an intermittent connection when using the Magic Mouse/Trackpad ONLY on Boot Camp?

Hi,
I've seen thousands of posts about Bluetooth connection issues and interference and stutter/lag for both the Magic Mouse and Trackpad (affecting both Mac OS X and Windows under Boot Camp) but my problem is different.
To summarise my setup, I use:
- Retina MacBook Pro (lid closed or open, doesn't make a difference to this problem)
- Thunderbolt Display
- Wireless Keyboard
- Magic Trackpad (have also tried a Magic Mouse and experience similar issues to the Trackpad)
And in Mac OS X, everything works perfectly. The keyboard and trackpad work smoothly when I'm 6-7 metres from the machine, whether or not the laptop lid is open or closed, and whether or not the Thunderbold Display is connected.
But on to my problem: the bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
But during usage, the cursor stutters/lags frequently, and tap to click (when enabled) seems to get triggered by mistake all the time (even when I'm not touching the Trackpad or even at the computer, clicks get registered).
The Wireless Keyboard is perfect, and works well 5 metres from the machine. The Mouse and Trackpad, though, don't even work reliably when they are 6 inches from the machine. The built-in trackpad on the laptop works perfectly too, in Windows and Mac.
I spent a week assuming I was suffering from Bluetooth interference, so I tried:
- using the laptop with the lid open
- removing the Thunderbolt display completely and trying the Magic Trackpad
- repositioning items on my desk
- disabling wifi
All of these adjustments made minor differences to how good/bad the Trackpad was, but none came close to fixing the problem or making it work as smoothly as under Mac OS X. It was only after doing all of this that I realised perhaps it was just a Apple driver for Windows issue, so I booted into Mac OS X and tested everything out, and sure enough, it's all perfect. But back into Windows, the Trackpad doesn't work reliably at all.
Obviously, the hardware is not at fault, and I assume the signal strength doesn't vary between operating system (why would it?) so I'm left believing this must be a driver issue. The TrackPad and Magic Mouse drivers have been out for a couple of years, so I'm surprised they can still be this bad. I tried both the latest driver from Boot Camp 4.0 (3.2.0.0) for the Trackpad, and also the older one from Boot Camp 3.2 (3.1.0.7) and both are equally bad for me.
So my question is: has anybody else struggled with using the Trackpad (or Magic Mouse) with Boot Camp 4.0 and Windows 7 64-bit, whilst finding it to be perfect under Mac OS? I haven't found many posts complaining about the Windows driver, which is why I assumed it was an interference issue. But I'm almost sure it isn't, having spent 2 weeks investigating.
Any thoughts/suggestions/answers much appreciated!
Kyle

SOLVED!
After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp. Hopefully this will help others:
The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly. My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties". Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one. As soon as I enabled the Windows Wireless Service, the problem came back. Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem. This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer. So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
I really hope this helps others trying to use Bluetooth devices under Boot Camp. All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
Cheers

How to share the same Database Connection when using several Task Flows ?

Hi All,
I’m using JDev 11.1.1.3.0.
I’m developing ADF Fusion Applications (ABC BC, ADF Faces…)
These applications are deployed on a Weblogic server.
Each application has only one Application Module.
All Application Modules have the same connection type defined: JDBC DataSource : jdbc/GCCDS
It is working fine.
I’ve also developed Task Flow Applications for small thinks that are reused in multiple main applications.
Each Task Flow Application has also one Application Module with the same connections type as main applications.
All these task flows are deployed to JAR file (ADF Library JAR File) and are reused on my main applications. (drag and drop from the Resource Palette to ADF Regions….).
There are some parameters passed to Task Flows, so that they can filter data depending on which main applications they are called from.
Everything is working perfectly.
All my main applications are using more and more task flows. Which is nice for the reusability etc…?
Only ONE PROBLEM: DATABASE CONNECTIONS.
Every Task Flows service made a database connection. So one user may have 10 database connections for the same adf page. And when there are 100 users that are working at the same time, it becomes a problem.
How to share the same database connections for the main applications and all task flows which are used in the main application?
Best Regards
Nicolas

Hi John,
When I open a ADF Library JAR file of one of my task flow. (gcc_tf_recentSites.jar)
I can see TF_RecentSitesService.xml and TF_RecentSitesServiceImpl.class in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service folder
+ bc4j.xcfg in gcc_tf_recentSites.jar\mu\gcc\tf\recentSites\model\service\common folder.
bc4j.xcfg details are
+<?xml version = '1.0' encoding = 'UTF-8'?>+
+<BC4JConfig version="11.1" xmlns="http://xmlns.oracle.com/bc4j/configuration">+
+<AppModuleConfigBag ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<AppModuleConfig DeployPlatform="LOCAL" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model" name="TF_RecentSitesServiceLocal" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService">+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+<Custom JDBCDataSource="jdbc/GCCDS"/>+
+</AppModuleConfig>+
+<AppModuleConfig name="TF_RecentSitesServiceShared" ApplicationName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService" DeployPlatform="LOCAL" JDBCName="gccdev" jbo.project="mu.gcc.tf.recentSites.model.TF_RecentSites_Model">+
+<AM-Pooling jbo.ampool.maxpoolsize="1" jbo.ampool.isuseexclusive="false"/>+
+<Security AppModuleJndiName="mu.gcc.tf.recentSites.model.service.TF_RecentSitesService"/>+
+</AppModuleConfig>+
+</AppModuleConfigBag>+
+</BC4JConfig>+
So, it seems that the Application Module is packaged with the task flow....
Is it normal ?
Regards
Nicolas

Can I Show Time Connected When Using Netgear DG834 Wireless Router ?

When I had an old SpeedTouch USB Modem I could see the time I had been connected to the internet from a readout in the menu along the top of the monitor.
Is there a way of displaying or ascertaining this information using the Netgear DG834 wireless router?
I have discovered that by opening the Router Satus and clicking on "Connected Status" I can get a window displaying this info - but is there a quicker "automatic" way of doing it?
Ian.

Hi Ian,
Interesting one…
When you connect via a USB modem the computer is 'doing' the connecting using the modem so the computer has the 'time connected' status available locally. In the case of a router it is connected to the internet irrespective of the computer's status; on, off, sleep, or even, connected to the router. The only way you're going to get the info is from the router itself and, unless it has a setting whereby it will automatically 'inform' the computer of its connected time, I think you're going to have to carry on as you are.
I don't know that particular Netgear but used to have a different one until a thunderstorm fried it. I don't remember it having such a setting. My current Belkin certainly hasn't.
I'm quite interested to know why you want this info. Are you on some kind of PAYG tariff?
Adrian

Losing smart camera connection when using web server on NI1762 smart camera

Hi
I am using 2 smart cameras ( old NI1762 and the new NI1772) with Vision builder 2011 .
I am trying to find a way to retrieve data and image to a Visual Basic 6 application. i could not find an elegant way to do it , so instead , i am sending TCP command to the smart camera as an input and the smart camera send me back a TCP command a as an output. by this way i could communicate with the smart camera . For transferring images I could not use the TCP step , so I turned on the smart camera web server to get the image by a browser Object . But the problem is that everything is going well with the TCP, but when I turned on the web server and try to communicate with it, sometimes I loose the connection with the smart camera. That is happened with the 1762 smart camera. But when I use the NI1772 it rarely happed.
Please help me. is there any other elegant way to communicate with the smart camera , and if a TCP and web server is a solution , Why the NI1762 web server is not stable ? Why i am losing the connection when browsing to the inspection page???
Thanx

Previous versions of Vision Builder had a COM library that you could use from Visual Basic 6 or other environments and talk over the network to a Smart Camera running Vision Builder AI and control its execution just how you are requesting. In more recent versions, this has been replaced by a native .NET and LabVIEW-native API that is much more fully featured. Unfortunately, I do not think the older COM mechanism is still available/supported (but I certainly could be wrong...).
However, one avenue you may wish to persue would be to call into the .NET interface from Visual Basic 6. Microsoft designed .NET to allow COM interoperibility in both directions (.NET can call into COM libraries and COM libraries can call into .NET). Take a look at the following document from Microsoft:
http://msdn.microsoft.com/en-us/library/zsfww439(v=vs.85).aspx
You could then look at any of the .NET (C#) examples to get an idea of the API:
C:\Program Files (x86)\National Instruments\Vision Builder AI 2011\API Examples\dotNET Examples
Eric

Apple TV loses wireless network connection when using AirPlay from iPad or iPhone 5

Our Apple TV loses connectivity to our wireless network while using Airplay from our iPad or iPhone 5. This started occurring after the latest iOS update. We are able to wirelessly stream movies from iTunes without any problem. This issue occurs only when using AirPlay. Does anyone have any suggestions?

I have a:
new MBPr 15" late 2013 with dedicated graphics card
new airport extreme base station
3rd generation apple tv
iPhone 5s
200mb download speed (not important, as streaming video on your local network has nothing todo with outside bandwidth)
All equipment is up to date software wise. Airplay mirroring from my laptop to my apple tv is ok. I get frequent lag, pixelation, audio skip (every 10 mins or so).
I'm using the 5ghz specturm to connect to the airport express so shouldn't have any inteference from my neibours (accordiing to iStumbler i'm the only person with a 5ghz setup using channel 30). I've tried connecting apple tv wirelessly and wired. No issues streaming from my iPhone or an iPad!
Surprisingly, using apps such as Beemer or Air Video Server on my MBP work better than native mirroring when it comes to video play back.
Strange when you think how Air Video works:
Video file lives on MBP
iPhone connects to laptop
Video plays on iPhone and is sent to Apple TV via Air Mirroring
Rather than:
Video played on laptop
Video sent to Apple TV
Seems bizzare that my iPhone can handle better streaming than my pro laptop.

Why getting WebLogic Connection when using Oracle Driver?

Does anyone know why I would be getting back an instance of weblogic.jdbc.rmi.SerialConnection
when retrieving a connection out of the connection pool, via my JDBC TX DataSource,
when my JDBC Connection pool is configured to use oracle.jdbc.OracleDriver. Seems
that since I'm using the Oracle driver I should not be getting back this WebLogic
connection.
Any insight is appreciated :)
thanks,
Dan

innumonenu wrote:
Even we are facing the same problem of ClassCastException when we try to cast to
OracleCallableStatement from the weblogic pool made of Oracle JDBC driver.
What is the URL which explains,
"Our wrappers do provide access to various non-standard
Oracle methods, and we document how to cast (to our concret class or to an interface
we define) in order to access these calls." as said by Joseph.http://e-docs.bea.com/wls/docs70/jdbc/thirdparty.html#1043705
>
>
"Dan Branley" <[email protected]> wrote:
Joseph,
Thanks for the insight. This answers a lot of questions. I appreciate
the thorough
explanation. Your assumption is correct. I am trying to use an Oracle
extension,
specifically I need to call PreparedStatement.setBlob() passing an instance
of
an Oracle BLOB.empty_lob(). I'll take a look at the WLS documentation
for an
alternative.
thanks,
Dan Branley
Joseph Weinstein <[email protected]> wrote:
We never give application code direct access to pooled connections.We
always
supply a wrapper class. These wrapper classes have various extra functionality,
such as cooperating under-the-covers with the transaction coordinator
to provide
EJB/UserTransaction transactional semantics/guarantees, regardless of
the number
of EJBs involved in a given transaction. For instance, when in an EJB/UserTransaction,
our wrapper will cheerfully ignore if application code calls a Connection.commit().
The
application code has no idea really when the transaction is done and
commitable, only
the transaction coordinator does. Most simply, our pools guarantee that
whatever
application reserves a pool connection will have sole use of it until
they close the connection
to return it to the pool. If we allowed direct access to a pooled connection,
one application
could cache the reference, and re-use it later when we presumed to allow
another user to
use it from the pool. Some of our wrapper objects are RMI-enabled so
they work in
external client JVMs and will do JDBC over the wire to the weblogicserver
and it's
pool connections. This wayt application code need not change to work
inside or
outside weblogic.
I suspect this question is because you want to use some of Oracle's
non-standard
extensions to JDBC. Our wrappers do provide access to various non-standard
Oracle methods, and we document how to cast (to our concret class or
to an interface we
define) in order to access these calls. Not all calls can be successfully
proxied by our wrappers
because some Oracle methods (which claim to take java.sql object asarguments)
actually
require oracle specific classes, and reject our proxies, even if they
are standard JDBC objects.
Joe
Dan Branley wrote:
Does anyone know why I would be getting back an instance of weblogic.jdbc.rmi.SerialConnection
when retrieving a connection out of the connection pool, via my JDBCTX DataSource,
when my JDBC Connection pool is configured to use oracle.jdbc.OracleDriver.Seems
that since I'm using the Oracle driver I should not be getting backthis WebLogic
connection.
Any insight is appreciated :)
thanks,
Dan

Safari cuts connection when using bank indentification

When I'm using iPhone without wifi this works fine but both iPad and iPhone cut connection in Safari when using wifi. Is the problem in Safari or my wifi router?

Seems to work fine with Puffin Free. Has something changed in Safari lately?

OS 10.4.6. has broken dialup connectivity when using fast user switching

Similar Messages

Maybe you are looking for