OS 10.4.7 may have issues.........
I have never had a problem with any update until now. 10.4.7 didn't finish installing (it closed itself). My system wouldn't boot properly, so I did an Archive & Install, then tried it again - same problem. I did another Archive & Install & this time installed the 10.4.6 Combo. I usually skip the verification of the installer (using Onyx), but decided to let it do the check when I expanded it the third time. It had an invalid checksum error, as did the QuickTime 7.x.x update. I think that some of the downloads people are getting are corrupted (possibly server errors or ISP errors). I won't be installing 10.4.7 until I download it again & it expands without a checksum error.
You can't downgrade. You can try an Archive and Install using the original software disks that came with your Mac, which would return you to the system version that shipped with your computer, but I tried that after the 10.4.7 update hosed my system, and it didn't work for me.
Some background: I used Software Update to update Quicktime, the iTunes Phone Driver, and to install the 10.4.7 update. Neither the 10.4.7 update nor the phone driver finished installing. Both errored out. Afterwards, I had many problems. For example, Safari wouldn't open, some Classic apps and docs lost their icons would not open using the Classic app that created them, I couldn't drag to the trash in my dock, and I could not change my doc prefs.
I tried the Archive and Install option, but it errored out, too. So I used Disk Utillity to verify the disk (which I also did before I attempted the 10.4.7 update, by the way - I always verify disks and permissions before attempting any updates.) No problems were found before 10.4.7, but after 10.4.7 and the attempted Archive and Install, it found serious problems it couldn't repair. I am certain that one or more of the updates caused the problems. I had to reformat my HD to fix it. Luckily I had all my important stuff backed up.
After reformatting, I ran Disk Utiltiy again. No problems were found this time, and my HD was verified. I reinstalled OS X, Classic support, and all of my apps one-by-one and applied the 10.4.6 Combo Update. I also updated iTunes, iPhoto, etc. using Software Update, but I avoided the latest Quicktime and iTunes Photo Driver, in case they were part of the prolem. Finally, I restored all my documents, music, photos, etc.
It took me a few hours. All is normal, now, and my hard drive is fine. Everything works as it did before I attempted the 10.4.7 update.
Although I am sure 10.4.7 has issues, I would also avoid the Quicktime and the iTunes Phone Driver updates for now. Those were the three things that I attempted at the same time, and then I had problems, so maybe one or all of them are problematic.
Until we know for sure, leave your system alone!
Similar Messages
-
So, what's with this? What does it mean? What are the reprocussions?
I am mostly worried that my LaCie won't work. I've backed up all my photos on it. Should I delete the new update? If so, how? The notice I got after downloading read as follows:
"Incompatible software
Some of the software on your computer is incompatible with this version of OS X. Because this software may cause problems with your computer, it has been moved. You can delete incompatible software that was moved.
Incompatible software on your computer was moved to a folder named "Incompatible Software" on your startup disk:
LaCie USB 3.0 Driver: this version of LaCie USB 3.0 Driver is not compatible with this version of OS X."
Hope someone can help me.
EWelcome to Apple Support Communities
OS X moves unsupported apps and extensions automatically to a special folder and disables them. If not, you will start seeing kernel panics and your Mac Pro wouldn't work correctly.
If your LaCie devices are working properly, there's nothing to worry. If not, download the most recent version from the LaCie site > http://www.lacie.com/us/support/drivers/driver.htm?id=10239 -
HI,
We are getting following error message for all users while sending mail to external but we able to receive mail from internet.
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may
be preventing delivery.Hi,
Please follow Luke and Shelly’s suggestion to check your SPF record and Send Connector configuration. Also you can post the complete NDR message(with NDR status code) here for further analysis.
If there is any updates, please feel free to let us know.
Thanks,
Winnie Liang
TechNet Community Support -
i have moved my sdcard over to my samsung brightside phone,. but the videos can not be read. Is there anyone out there whom may have experienced the same issue? I also tried transferring my files over to my pc first, then reformatted the sdcard, then transferred to the appropriate files back onto the sdcard and put back into samsung.
Thanks for the info SuzyQ. lorsa, the community is correct, pictures and videos can be saved differently on other phones. What phone did you remove the SIM card from? Where did you purchase your SIM card from? Your previous phones SD card and format may not be compatible with your Brightside device. I show you advise that you reformated your memory card but make sure the files are saved correctly. Listed below are the different type of files you can save, receive, and view for pics and videos with your device.
Files that are compatible with the Brightside device:
JPEG (*.jpg, *.jpeg, *.jpe)
BMP (*.bmp)
PNG (*.png)
GIF (*.gif)
3G2 (*.3g2)
3GP (*.3gp)
MPEG4 (*.mpg)
Please let me know if the information above helped with your issue. Please reach out to us if you have any questions or concerns. Make sure you always power cycle periodically. You may also need to peform a hard rest for your phone.
KinquanaH_VZW -
Strange Comments issue I may have caused, any suggestions?
Hello, I may have caused a problem on my iWeb blog and hope that someone can offer suggestions.
What I did was this - my blog page name was Weblog. I changed it to Blog while making other changes to my website. I then published changes. However, when I saw that my changes were still showing in red (website was not updated), I published all and everything went to blue. My site was updated.
Problem - after doing the above, I noticed that all my entries on the website said "No Comments", even on entries that I know have comments. I went into iWeb and it says the same thing, but when I read the blog entry, the comments are there with the correct count. So I can see the comments in iWeb, but not on the website. Both iWeb and the website show "No Comments" in the blog page and in each entry.
I later read the Apple troubleshooting note (via a link in this forum) that because the comments are stored on their server, we should not change the folder name. However, I did not change the folder name, did I? Is that the same as changing the page name in iWeb?
Anyway, I first tested my site by posting a comment in a new entry and it works. However, if I add a comment to an entry that had previous comments, the old comments go away and only the new comment shows. So, I deleted the new comments and quit iWeb without saving. This got me back to where the old comments were still there.
I decided to change the page name back to Weblog and I republished the entire site, but that did not work. All the entries and blog page still say "No Comments" in both iWeb and on my site, even though the comments can be seen in iWeb.
If anyone has any suggestions for getting the website to show the counts, and for the website to show the counts and the comments, I would appreciate it. It was always working well before, I shouldn't have changed the page name, and then change it back, but I didn't think that would do any harm.
BTW, this was my first use and publishing on iWeb since updating to OS 10.5.7 late last week, so not sure if that had anything to do with it. I am also on a new iMac after migrating yesterday, hope that doesn't add to the issue.
Thanks in advance for your help. I have always been able to resolve issues with help from the users here, but I fear that I may have caused a doozy.
Santiago
link to my website blog if it helps --> http://web.me.com/sabretado/sabretado/Weblog/Weblog.html
The last entry that I know had comments was the one about the World Baseball Classic on March 22, 2009. I looked at the source but don't see any of the comments showing, just something about the Comments widget. Thanks.Santiago ~ The "Fix iWeb" section here has some suggestions:
http://www.iwebformusicians.com/WebMusic/iWebTips.html
And MobileMe live chat support is now 24/7 — see this announcement. Other Apple support options are here.
Problems with iWeb's blog and comments feature are a recurring theme in these discussions. You may want to consider a dedicated, more robust blogging system such as:
http://www.posterous.com/faq
http://support.wordpress.com/getting-started -
As an early adopter (and champion) of Firefox, it is with great sadness that after more than 10 years I find that I will need to un-install Firefox and move to another browser due to your ongoing compatibility issues with Shockwave Flash (a page freeze with an eventual pop-up message saying "shockwave flash may be busy, or it may have stopped responding..." on any and every page that has flash content). It has made my browsing experience horrible for more than half a month, and I've invested more than a week trying to address it. I started with all of the tweaky recommendations from your support site, Adobe's support site and many 3rd party sites; then a Firefox reset, and then eventually moved on to complete clean re-installations of Firefox and Adobe. Nothing fixed the issue. And it is an issue that doesn't occur on other browsers like IE, Opera and Chrome. Frankly it just shouldn't be this hard, and I believe you should be addressing it head on. I see from many online forums and your support site that I am far from alone. Do a quick Google search of "Firefox, shockwave flash may be busy, or it may have stopped responding" if you actually need to confirm this. I am using modern hardware (HP laptop with an i7 processor) and a major, supported OS (Windows7 64-bit). I hope for your sake you get it figured out. If you do, feel free to let me know... I might consider coming back, though frankly this may just be a sign that the Mozilla of old is no more. It makes me sad for both of us.
''klear101 [[#question-1038386|said]]''
<blockquote>
As an early adopter (and champion) of Firefox, it is with great sadness that after more than 10 years I find that I will need to un-install Firefox and move to another browser due to your ongoing compatibility issues with Shockwave Flash (a page freeze with an eventual pop-up message saying "shockwave flash may be busy, or it may have stopped responding..." on any and every page that has flash content). It has made my browsing experience horrible for more than half a month, and I've invested more than a week trying to address it. I started with all of the tweaky recommendations from your support site, Adobe's support site and many 3rd party sites; then a Firefox reset, and then eventually moved on to complete clean re-installations of Firefox and Adobe. Nothing fixed the issue. And it is an issue that doesn't occur on other browsers like IE, Opera and Chrome. Frankly it just shouldn't be this hard, and I believe you should be addressing it head on. I see from many online forums and your support site that I am far from alone. Do a quick Google search of "Firefox, shockwave flash may be busy, or it may have stopped responding" if you actually need to confirm this. I am using modern hardware (HP laptop with an i7 processor) and a major, supported OS (Windows7 64-bit). I hope for your sake you get it figured out. If you do, feel free to let me know... I might consider coming back, though frankly this may just be a sign that the Mozilla of old is no more. It makes me sad for both of us.
</blockquote>
Strangely I tried all the suggested fixes for the problems of Script errors especially related to adobe. In addition when I clicked the firefox icon it took a long time to load. None of the suggested fixes in the forum has changed or fixed either of these 2 problems.
Yesterday I entered services.msc and changed all of my microsoft network services and services related to my adapor that said manual to automatic. I did this unrelated to firefox but because my network/wifi was connecting slowly when I booted up my computer. I then rebooted my computer.
To my surprise not only did my wifi connect faster but firefox now loads normally and all the script error messages related to adobe have disappeared. Firefox has worked perfectly now for 2 days.
For my individual situation my firefox problems were all related to network services being set to manual rather then automatic. How this effects firefox is unknown to me but must somehow be related to how firefox is accessing the network. -
hi Guys
please help me out for below issue
Some time we are getting error while sending mail to particular recipient and getting below error
"Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery.
The following organization rejected your message:"
but some mails are going without any issueHi,
First, please check if there is a transport rule blocking you from send email to the particular recipient. Besides, please check for any third party transport agents, I recommend you disable third party transport agents temporarily. If there is any AV/AS
scanning on your Exchange server, please disable it temporarily and test again.
If the issue persists, in order to troubleshoot the problem more efficiently, I need to clarify some information.
1. Did you send emails externally or internally?
2. How many recipients were affected?
3. From "Some time we are getting error while sending mail to particular recipient", do you mean all users couldn't send emails to the particular recipient or just some users of all couldn't send emails to the particular recipient?
Sometimes message tracking log is useful for us, to narrow down the issue, I recommend you check message tracking log for related error message.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected] -
Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan FoleyThank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. -
I am working on SharePoint 2010 Enterprise and had recently upgraded our site from Sharepoint 3.0 Services to SharePoint 2010 Enterprise. Everything seems to be working fine for the site, but there is one issue. The problem I am running into
is when I create a Network Place, I am able to view the documents and lists of the main page, but if I click on a folder for a sub site, I get the following error:
"Documents in this folder are not available. The folder may have been moved or deleted, or network problems may be preventing a connection to the server. There is a problem with the web server. Please try again later or contact the
server administrator."
If there were a network issue, I would not be able to navigate around on the main page to lists and document libraries. This seems to affect all of the sub sites on my site. Explorer view works if that information is required and I do not get
error messages using Explorer view.
Thanks in advanced for any help on this.
-ThaoHi pei jingw,
You should be able to log in with your Adobe ID/password in lieu of a serial number. Are you able to do that?
Best,
Sara -
I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others. -
Macbook Pro, running 10.8.5 - can't restart but can shutdown and boot up - may have virus or malware
Needless to say I'm beyond embarrassed. I teach computer science (Middle School, private school) and have forever warned my kids to be very careful what they download; but are always "safer" with Mac OSX. Alas, maybe not. I was trying to download Google Earth a few weeks ago and got caught in that fake trap (the fake "Installer" trick) and realized way too late I'd downloaded something "else" instead of Google Earth. Pop up adware by the gazillion. My browser settings were a mess. Went in and reset them as best as I could. And for awhile, so far so good. Until I tried to launch Firefox this week; and WOW...awful. I deleted my Firefox files, went to Firefox and RE DOWNLOADED (or so I thought) a new version of Firefox, and WHAM. Hit again. I can shutdown my Macbook; I can boot it up from a cold dead start...BUT I can no longer "Restart" the computer without an annoying popup message pretending to be a wayward "Installer" wanting to "complete a download" stating if I didn't want to complete it I could 'click' Abort...well I tried but the screen froze. I've had to shutdown or do a hard reboot to get it back up again. I've checked my settings on Google Chrome; seems fine. Don't use Safari that much, but it appears to be a Firefox troll.
What should I do to troubleshoot what this is and how to be rid of it? I wish I could send you a screen shot of the pop up but alas, it freezes the screen when I try to click anything thus my Screen shot capability is nil.
I bought this Macbook Pro in April, 2013. It's my workhorse. HELP!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I only show one iCloud on my IPhone that can do a restore. I synced it with my MacBook Pro and I think that may have messed things up. Prior to that I have several backups. Will a "genius" be able to access the info I need?
If things seem to be going haywire with your phone, it seems that it MAY be a software issue.
Now, that being said, that does not necessarily mean that it is a virus. Software issues do happen sometimes. It is probably just coincidence.
What you need to do is restore the device using iTunes. This will fix any software issues. After you have done this, you can restore from an iCloud backup.
iCloud does not back up the actual software, so no, the "virus" would not have gotten into the backups.
The link below provides steps on restoring your device using iTunes as well as how to restore from an iCloud backup.
http://support.apple.com/kb/ht1766
Don't worry! Everything should be back to normal if you follow these steps. -
I need the Adobe Flash Player version 11.1.102.64plug in on my MacAir to view Ustream videos. Adobe message says the version is for Intel-based Macs with Safari; also says that I "may have to temporarily disable antivirus software. is it safe to download?
Your MacBook Air is an Intel-based system. To download the current version (11.2.202.228), go to http://get.adobe.com/flashplayer/ and download it from there.
If there is still a Flash issue, you can try the Google Chrome browser, which has the current Flash built into it, to see if it works any differently with the videos. It's available from https://www.google.com/chrome
Maybe you are looking for
-
Unable to update numbering schemes in define purchasing options
Hi, We are unable to update the numbering scheme from manual to automatic in define purchasing options (Numbering Tab). Documentation says that you can update it, but it does not give any reason under what circumstances we would not be allowed to upd
-
Where can I find a tutorial for Dreamweaver CS6?
Where can I find a tutorial for Dreamweaver CS6?
-
How to make this effect precisely
Hey, some ideas have been to use Halftone Pattern effect but this produce a somehow different look. thanks!
-
think i accidently singed in to face time which has changed my icons/settings ect how to i return to original
-
Steps to follow to migarate datafrom oracle 10g to oracle11gR2
Hi , I am trying to do data migration from oracle 10g(hp-ux platform) to oracle11gR2(linux) using export and import. First time i did full data base import and export and it is completed succsesfully.But i can see so many objects with "INVALID" state