OS 10.4 not recognizing my PCI cards

I just upgraded my G4 dual 1.25gh machine from OS 10.3.9 to 10.4, using the disc which came with my G5 PPC machine (with PCI slots.) The drive doesn't find any of the 4 PCI cards (from 3 different manufacturers) installed in the G4. When I re-boot from a cloned 10.3.9 drive, the PCI cards are seen. I've updated to 10.4.11 (PPC) via download, but OS 10.4 still isn't seeing my PCI cards. Can anybody help me sort this out? Thanks, Tom

Besides the legal issue of one running copy per license, I'm surprised to hear that the G5's disk worked at all, you need either the Retail version of Tiger, or the Machine specific Gray one for the G4...
Tiger at Apple...
http://tinyurl.com/2u7ewu

Similar Messages

HT1267 i restored my iphone and itunes is not recognizing the sim card why?

okay im having problems with my iphone, it was disabled and i went to itunes to restore the phone, now that it has itunes is not recognizing my sim card that was originally in the phone during the disablement and the restoring, so i have a phone that says no service but has a sim card in it. what do i do

iPhones require a SIM card for activation. The SIM does not need to be active, but it must be for the carrier the device is locked to.

Am having problems buying app from App Store ... It's not recognizing my credit card security code... It's says " incorrect code" any help pls wot do I do

Am having problems buying app from App Store ... It's not recognizing my credit card security code... It's says " incorrect code" any help pls wot do I do

This can be caused by a few things.
      Make sure the billing card address, the one on the statement is the exact
             same as in iTunes.
      Note even the zip code being off can cause this.
       Try a different CC
      and the way the always works
          An iTunes GC.

System profiler "information is not available" for PCI cards

After swapping two cards in their slots, I get the message system profiler "information is not available" for all PCI cards. Mac Pro 4 core 2.66, OS X 4.11 server. The cards are still working. I tried clearing PRAM, etc. Is this a hardware problem or just system profiler being difficult? Is there any way to tell?

That is a bit odd. Maybe try forcing kextd to run can resolve. You might be working off cached info and it is giving System Profiler a hard time. Run this command and then reboot:
sudo touch /System/Library/Extensions
That will update the modify time of the Extensions folder and trick the system into thinking you installed new drivers. This will force an update of the kernel caches when you reboot.
Not sure it this will do it, but best I could think of.
Hope it helps.

My iphoto is not recognizing my sd card

I have a macBook Pro and I have been downloading my pictures directly from my SD card to my computer for about 2 years now. For the past few weeks I have been trying to download my pictures and the computer is not recognizing that I am inserting my sd card at all. The iphoto icon usually opens up on its own once the card has been put in, but now nothing. I've opened iphoto then tried to put he card in, but still nothing. I don't see the card anywhere on the computer at all. Any ideas?

Does it mount to the finder? Does Image capture see it?
What you need to do is find a way to get th ephoto soff and then use your camera's format command to reformat the SD card
In the future a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
LN

Windows 8.1 not recognizing my video card

I found this link of something similar to a forum thread that was never completed! I have the same problem this guy had last year, but he never responded if their fixes worked for him. So far, I've tried both boot camp 5.1 driver versions and neither has worked for me. The version for the older macs didn't allow me internet access, so I realized something was wrong, then switched to this newer model bootcamp 5.1 and am not seeing my video card at all!
My system is a mid 2014 MacBook pro
16gb Ram
512gb Flash drive
intel i7 quad core 2.5ghz
graphics card (unknown!) I think it is supposed to be a GeForce 750m or 850m or something like that... but I can't find it while in boot camp.
I've tried every fix I can think of, from searching for drivers on the internet (which doesn't really work when bootcamp doesn't even recognize the hardware in the first place), to reinstalling the bootcamp drivers... again. Someone please help!

Wow, nevermind. Trying the 5.1.5 for a second time fixed my problem. It is now registering my GeForce 750m and my Archeage game is running beautifully on very high settings! Why oh why didn't it work the first two times...

8100 Pearl not recognizing 2G MicroSD card

When I put the card in the phone, then replace the battery, the phone never turns on. The outside red LED flashes red and the phone never turns on. The options for the Media Card are:
Media Card Support: ON
Encruption ModeL None
Mass Storage Mode Support: On
Auto enable mass storage mode when connected: Prompt
Not sure if these matter or not, a friends' 512mb card worked fine.
Ill be returning the card soon, am I missing something? is there any settings I could look at?
Thanks,
Jason

2GB is supported by 8100. What is your OS version?
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Nikon raw files not recognized on CompactFlash card

Hi all,
I inserted my CompactFlash card (containing Nikon NEF files) in a card reader connected to my iMac today. iPhoto opened, showed the card but said there were no photos on the card. Image Capture also shows the card but says there are no images.
Examining the card in the finder showed the images as expected. I was able to copy them to the hard drive. When I imported them from the hard drive into iPhoto, the images were extremely pixelated. These same images open normally in Adobe Camera Raw and Photoshop CS3.
The card and card reader imported fine on an iBook G4 running iPhoto 6.
I tried the following to resolve the issue:
• refomatted the CompactFlash card, shot an image and attempted import
• rebuilt iPhoto library
• deleted preferences for iPhoto and Image Capture preferences in /Library and ~/Library
None of these were successful. Does anyone have any thoughts on further steps I can take to resolve this problem? Any help would be greatly appreciated.

Hi Terence. I initially did not find the RawCamera.bundle in /System/Library/CoreServices. I looked it up in Time Machine and found the version number. I then restored it from Time Machine backup and restarted. All works fine now. Now I need to figure out how RawCamera.bundle got deleted yesterday as I was not messing around in the /System/Library/CoreServices folder.
Thanks much for the help and ideas all.

RD430 will not boot when PCI card is added

I'm having an issue where my RD430 server will hang if I try to install a graphics card. My BIOS is up to date, using v2.12
I purchased an NVIDIA Quadro K2000 card. I attach it to one of the risers, connect my monitor to the NVIDIA card, and turn the server on.
Immediately before displaying the "American Megatrends" BIOS screen, the server beeps twice, the beeps are about one second apart from each other. The options F1 for set-up, F12 for Boot Menu are displayed, but they do not function. If I press F1 or F12 nothing happens. After about 20 seconds, the server beeps again but the screen does not change. Another 20 seconds, another beep. This happens a third time after another 20 seconds. After this the screen then goes black, and a blinking white cursor is up in the top left corner of the screen. Nothing happens after this point (I've waited hours.)
I turn off the server and I remove the NVIDIA card. I connect the monitor back to the on-board VGA port. I turn on the server and it operates normally. The OS boots, and I can also get into the Boot Menu and BIOS by pressing F1 or F12 when the American Megatrends screen is displayed.
I installed the NVIDIA card into a desktop computer to make sure it was operational, and the card worked perfectly.
Any idea what I should try? I checked the boot order in the BIOS and did not see anything wrong.

Update the bios... I had the same troubles and explain some about it in this thread.

Premiere Pro CC not recognizing my graphics card

I was editing with it fine, not all of sudden Premiere Pro cc dont recognize card a MPE is diabled
Mt card is a GTX 660

If Windows, it is "fairly" common that a Windows Update will change "just enough" that a graphics adapter driver will become out of date
If Windows,
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

My Iphone is not recognizing my SIM card...I've tried two cards but no luck...please help...

I tried putting two SIM cards in my iphone. It intially recognizes it, but it can't text, 1 out of 5 call attempts are successful. The rest is all good, but it's not like a phone anymore..

Are thses actual microSIMs or regular SIMs that have been cut down?
IF they have been cut down, it's possible they were not cut properly and are not making contact resulting in marginal performance.
If they are microSIMs then it's possible the iPhone is experiencing a hardware issue.

My ipad is not recognizing my sim card

my Ipad 2 is about 2 years old, i have downloaded IOS 7
and now i keep getting a message that i have no sim card ... i am travelling and require my 3G when not in wifi areas
anyone else had this problem ?? is it related to the IOS 7 ??
thanks ...
i have tried to reinsert the sim card ,,,,, but have no paper clip !!!

I hope I'm not jumping the gun, but after having the same "No Sim Card" problem after installing iOS7, trying the various "fixes" ... removing and replacing Sim Card, turning Airport Mode off and on, etc., without a permanent fix, just now I removed the Sim Card and cleaned the inside of the Sim Card slot on my iPad2.
To do this I took a thin flexible piece of plastic ... it's actually one of the removable collar stiffeners from a men's dress shirt, but a sized strip of cardboard would also work. I folded a cut-to-fit strip of paper towel ( I used heavy duty Bounty paper towel so it wouldn't fall apart ... a piece of clean cotton would work as well) over the plastic strip, soaked it with isopropyl alcohol, and carefully slid it back and forth in the slot a couple of times.
Then I reinserted the sim card and turned the iPad back on. At first I got the no card message again, but after simply turning Airport mode off and on, then wi-fi off and on, it started working again. This was a few hours ago. I've gone back to the iPad several times now and when I've turned it on, it continues to work properly. Only time will tell if this will work permanently, but since I've had the no card message non-stop for 2 weeks now, it's definitely encouraging.
It makes sense, because one of the fixes was to clean the Sim Card. Why wouldn't the Sim Card's receptacle be just as likely to get dirty or have a tiny bit of dust on it, stopping the connection? Wish me luck.

ITunes not recognizing my sim card after iPhone update

Hi,
So I just updated my iPhone software to the iOS 4 version on my 3G and connected it to itunes. Everything got backed up fine but when connecting to the itunes store, it says that my sim card is not supported.
I've tried turning it off and switching it back on, but nothing seems to work.
If anyone can help me in this, it would be awesome!
Thanks!

Are thses actual microSIMs or regular SIMs that have been cut down?
IF they have been cut down, it's possible they were not cut properly and are not making contact resulting in marginal performance.
If they are microSIMs then it's possible the iPhone is experiencing a hardware issue.

Computer is not Recognizing Compact Flash Cards and Readers

My digital readers are no longer being recognized by my computer. When I plug one of them into a multi-port firewire hub they are not being seen. In the past when I did this iPhoto would open and then I downloaded the photos into iPhoto. Now nothing happens.

Have you considered all relevant suggestions from here?
http://support.apple.com/kb/HT1317
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Log and transfer not recognizing my p2 cards

I have been off my computer for a few weeks and I just went to upload data from my p2 cards and log and transfer will not recognize them. I copied the card contents with the text docs into folders on my desktop to do the transfer and the Log and Transfer still did not work.
Last time I had problems with this was a quicktime update, I have updated since and it worked fine until now. does anyone have any experience with this problem or have I just messed something up? I am running FCP 6.0.4.

Do you have FX Factory installed? Version 1 and 2...and the demos...interfere with import. Either remove it or update to 2.0.1 and that will fix it.
Shane

OS 10.4 not recognizing my PCI cards

Similar Messages

Maybe you are looking for