OS 10.5 Dialup (PPP) Given Up The Ghost, Just NOT Working
I assume this is a well know problem by now. Just wanted to make my problem "official".
Installed 10.5 which is generally working well; however dial-up has just gotten worse and worse....
I cannot dial-up at all now and have given up trying all the various work arounds, and just boot up in 10.3.9. (And then suddenly it might just work under 10.5, which is weird).
When I attempt dial-up there are no dial tones, so I'm assuming the software isn't even connecting to the modem. I read that something similiar happened with 10.4. System details follows:
Hardware Overview:
Machine Model: Power Mac G4
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 2 MB
Memory: 1.12 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.5f1
Serial Number: SG13900ULJR
Modem Information:
Interface Type: Serial
Modem Model: Spring
Driver: com.apple.driver.AppleSCCSerial (v1.2.6)
Hardware Version: 7.0F
Country:
SKU Name: Australia
Modulation: V.90
I had the very same problem ith my 933 Mhz G4. It also uses the same "Spring" internal modem. I got on the phone with Apple tech support, and they had me make a new "location" in the PPP control panel, and i got conected one time after doing that, but then after that I could not reproduce it, and it worked only once.
The only way i was able to get online was tyo use the included "Generic" modem scriopt, and use the "Dialup Service" option for the "Generic" modem. I do not know what the conect speed rate is since the 10.5 panel no longer tells you what your connect rate is like it did in Tiger, but from using it, it fels about as fast as the Apple Internal Modem script did in Tiger.
Leapord had this long delay in getting out, and yet it does not work with a Apple internal modem on a machine that is supposed to be compatable with Leaport??? Seems like someone dropped the ball here big time....
I also got the Blue Scrren of Death, after I took all the precautions to prevent it, including getting rid of all Program Enhancement software, and even all of their Preference files, including insalling back my original Safari program that was unaltered. So I had to do a Archive and Install. i stil had to sue the "Generic" Modem script even after the Archive and Install without saving Network Preferences.
Similar Messages
-
MBean sample program given in the URL is not working....
Hi, i am a newbie learning about JMX and mBean and its registration.
I am going through the following URL and downloaded jmx_examples.zip given in that page.
<p>
" http://java.sun.com/docs/books/tutorial/jmx/mbeans/standard.html "
</p>
But, when i run it from my local system, i am getting the following errors,
C:\JMX_samples>javac com\example\*.java
com\example\Client.java:15: cannot find symbol
symbol : class JMX
location: package javax.management
import javax.management.JMX;
^
com\example\QueueSample.java:9: cannot find symbol
symbol : class ConstructorProperties
location: package java.beans
import java.beans.ConstructorProperties;
^
com\example\QueueSample.java:18: cannot find symbol
symbol : class ConstructorProperties
location: class com.example.QueueSample
@ConstructorProperties({"date", "size", "head"})
^
com\example\Client.java:113: cannot find symbol
symbol : variable JMX
location: class com.example.Client
JMX.newMBeanProxy(mbsc, mbeanName, HelloMBean.class, true);
^
com\example\Client.java:167: cannot find symbol
symbol : variable JMX
location: class com.example.Client
JMX.newMXBeanProxy(mbsc, mxbeanName, QueueSamplerMXBean.class);
^
Note: com\example\QueueSampler.java uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: com\example\Client.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
5 errors
I know that, i have to include some jars, but i dont know what are they? please help me find them and also let me know what are the jars that i need to run this sample program?
Edited by: vinney_143 on Apr 7, 2009 5:31 PMIt looks as if you are trying to use an example for Java 6 with a Java 5 platform. The javax.management.JMX and java.beans.ConstructorProperties classes are new with Java 6.
Regards,
Éamonn McManus -- JMX Spec Lead -- [http://weblogs.java.net/blog/emcmanus] -
Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
AlexMany thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
The wi-fi on my ipod touch is connected but the internett is not working! Help
Soo annoying, it's connected but the internett is not working. I don't know what to type in or what to do, so I need help.
Are you 100% positive you are connected? Head to Settings - Wi-Fi and tap the > next to the network you are connected to? What is listed for an IP address? If it's in the 169.x.x.x range, it means your iPod did not properly receive a valid IP address via DHCP from your modem/router. So the 169.x.x.x address is a self-assigned one.
This can usually be resolved by a reboot of your router. You can do this by unplugging it for about 30 seconds. After it powers back up, try reconnecting it. It wouldn't hurt to try a reset of your iPod as well. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting suggestions.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock -
Satellite U400 - the webcam does not work anymore
Hello guys here is my sudden probloema!
About a year ago I purchased a laptop
TOSHIBA - Satellite U400
with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
Gan you help me?
GrazieeAre you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction. -
I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.
Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.
-
WRT1900 AC V1 - Linksys is aware that the router is not working properly. Help spread the word.
I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900 AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900 AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900 AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900 AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?FernandoRocker wrote:
Well... instead of looking into this with Engineering, I would prefer you to talk about this with the Sales department and exchange my WRT1900AC for an EA8500 (I will pay the difference if needed). Seriously. The device is useless. Not just a paperweigt... an expensive paperweight.Actually I looking into the swap for you because I think that would be best in your case. Keep this in perspective. There is laterally millions of WRT1900AC V1 out there with very few issues with latest firmwares and of course the odd exception. In your case it could be a defective WRT1900AC. -
WRT1900AC V1 - Linksys is aware that the router is not working properly. Help spread the word.
I just had a conversation with Linksys' Customer Service via chat: Daphne L. J: Hello Fernando Paramo. My name is Daphne L..
Daphne L. J: Welcome to Linksys Global Chat. Is this your initial contact or do you have a case number?
You: Case number is 04971062
Daphne L. J: Please give me 3-5 minutes to pull up and review your case.
You: OK
Daphne L. J: Thank you.
You: I have a WRT1900AC, V1. The router is not working properly. I have disconnections every few minutes.I already installed the new firmware version and I still have the same issues. I already reset the router to factory defaults and same issues. I have changed the settings back to my personal preferences: Changed the SSID, changed the wireless security settings, changed the DNS and deactivate WPS. That's it.I'm using 5 Ghz mode with my laptops (5 Ghz adapters) and 2-4 Ghz with a few devices (Chromecast, Nintendo 3DS).
Daphne L. J: Thank you for waiting.
Daphne L. J: Please confirm if the following information is correct:
Name : Fernando Paramo
Phone Number :
E-Mail Address :
Model Number : WRT1900AC
Serial Number : 13J10609406280
Country : United States
You: That's correct.
Daphne L. J: Okay. Were you able to check if the devices have stable connection wired to the router?
You: No. I do not have devices with Ethernet ports. Well, only the cable modem.
You: But the modem is fine. No disconnections from my ISP.
You: It is the router.
Daphne L. J: Alright. What is the current firmware version of your router?
You: I tried to return the router to Wal-Mart yesterday with no luck. This is a useless device. And I have been reading comments on the community forums and a lot of people are having problems.
Daphne L. J: We are actually aware of the issue and are working on a resolution. What is the current firmware version of your router?
You: Ver. 1.1.10.167514
You: Latest one.
Daphne L. J: Yes, so you reflashed the firmware, reset and then manually reconfigure it after, not using backup configuration, is that right?
You: That's correct.
Daphne L. J: And it is intermittent on all devices connected to both 2.4 and 5 Ghz networks, is that right?
You: That's correct.
Daphne L. J: Thank you for the information. Please give ,e 3-5 minutes to verify this with my superior.
Daphne L. J: Thank you for waiting.
You: I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myseld.
You: I do not want my current hardware.
You: It is useless for my needs.
You: I can't believe I had an older E3000 that didn't give me any problems.
Daphne L. J: We have already exhausted all possible troubleshooting steps for your concern. As verified with my Supervisor, we will forward your case to our Customer Assurance Team. They are highly technical and knowledgeable when it comes to advanced troubleshooting. They will contact you in the next 24 to 48 hours. By the way, who is your Internet Service Provider? And do you Cable or DSL connection?
You: Cable connection.
Daphne L. J: Who is your Internet Service Provider?
You: A company called .
You: How are they going to contact me?
Daphne L. J: Alright. By the way, on the device itself, on its FCC ID, please check if you have WRT1900AC or WRT1900AC v2.
You: Are you paying attention to me?
You: I already told you it's V1.
Daphne L. J: They will call or email you. Please double check if these informations are correct:
Name :
Phone Number :
E-Mail Address :
You: I told you I want to send you my WRT1900AC and get a V2 or I want a EA8500 and pay the difference myself.
You: I want them to contact me to my email. I can't answer the phone during work hours.
Daphne L. J: We can't assure you if we will be able to replace it with Version 2 or if you are allowed to have the EA8500 instead.
Daphne L. J: Just in case, do you also have an alternate number?
Daphne L. J: Also, what time zone are you in? And what is your preferred time and day for them to contact you?
You: I have the one from my office in Mexico. Central Time. Any time is good.
Daphne L. J: So, you are currently in Mexico?
You: I work in Mexico but I have the house in USA. I live in the border.
Daphne L. J: I see. Do you have any other questions or clarifications?
You: I live 10 minutes away from the International Bridge. But that's not an issue. I bought the router at Walmart in Laredo, TX.
Daphne L. J: Thank you for the information. Would that be all for now?
You: I want a clarification: Do you realize that there is an issue with the current WRT1900AC? Are you aware of that?
You: Because this is a very expensive router that is not working as it should be.
Daphne L. J: Yes, we are aware of the issue and are working on a resolution.
Daphne L. J: Would there be anything else you need?
You: That would be it. I will wait for you to contact me.
You: Thanks.
Daphne L. J: Alright. Thank you for giving us an opportunity to serve you through Linksys Live Chat. You may also visit our support site at www.linksys.com. For your reference, your case number is 04980394. Thank you for choosing Linksys and have a great day! We paid $250 for this piece of equipment. That's a lot of money for a device that doesn't work. I just want to get a V2 replacement, or better yet, an exchange for a EA8500. We should all demand this. It is not fair for us. The current WRT1900AC is a useless device. They even should do a recall of the product. I will wait for them to contact me, but I'm thinking if I should send the information to The Consumerist or someone else. What to do?Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
-
my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?
You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.
-
My mac fall and now the trackpad is not working?
So today my macbook fall and the bottom left part of the trackpad is not working . I can still move the cursor, but if I click on the bottom left corner of the trackpad, I cannot tap the other trackpad part, it will not respond. To make it respond again, I need to click on the bottom right corner of the trackpad, so I can tap the other trackpad parts. In short, I must TAP to click, I can't click on the bottom left corner. The secondary click (bottom right corner or two fingers tap) works fine.
There's no Apple Store in my city (or even country, I live in Indonesia), I just have an Apple Reseller on my city. What do I need to do?I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees). -
I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?
I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue. -
Hey I plug my iPhone 5 and the charger is not working and I'm freaking out!!! It never hasn't happened and I just have in this moment 4% I all ready tried on pther pluggers on the house and is the charges that doesn't work. What should I do?
@whimsei,
Hello and thank you for posting back. What it sounds like is the cable that connects to the screen from the motherboard has either come loose or has a issue after the fall.
To fix this it would have to be opened up and the connections checked. If there is an issue with the cable then it would have to be replaced. This will require either you opening up the system yourself and checking the connections and tha cable or sending it in for repair.
Here is the link to the maintenance and service guide. If you feel comfortable doing the work it will help you.
HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC
Maintenance and Service Guide
If you want to send it in for repair here is how.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Please let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP -
i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?
Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/ -
I am trying to open a service request and the site does not work.
I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.
I just went through several screens and had no problems. Try clearing your browser's cache and/or history.
Maybe you are looking for
-
Laserjet 3100 driver for Vista OS
Need help finding a driver for my Laserjet 3100 on Vista OS Thanks
-
News Videos won't play - Fox & a local TV news station.
When I try and watch my news videos Fox News & my local TV station news (WHIO CBS) will not play. Fox just has a black video screen which never starts & my local news has a small circle that just spins but never starts the video. MSNBC, CBS, ABC & so
-
Contacts background won't change to white
When I change from dark to white, then close and reopen, nothing changes and there isn't a save button.
-
Is there a 64 bit foxfire for win7?
if so, where do i find it?
-
I'm trying to restore my ipad 2 ios 7.1 still getting error (9)
i'm using windows 7 and i have leatest version of itunes and my ipad 2 now in recovery mode and when i restore it to ios 7.1 i getting error (9)