OS 10.6.5 on an aluminum PB?

I recently bought a MacBook Pro but also have a (1.33GHz) 15" Aluminum PB. How well do you think OS 10.6.5 would run on the Powerbook? Would it be painfully slow?

If you have the Radeon Mobility 9700 video chipset, OD 10.5 may work fine if you have a lot of RAM in the PB. I recently installed 10.5 on my 1.25ghz SP G4 Tower with the same bus speed and your PB (has 1.75G RAM). The video card in that computer doesn't  support Core image and 10.5 is a little choppy. I recall the the Radeon 9700 (that should be the chipset in your PB) has core image support--better.
With modern modules, the G4 PowerBook will accommodate a max of 2G RAM. That could help, at least bumping the RAM to 1.5.
10.5 is still available from Apple but you have to call the main store (not a retail store) at 1-800-MY-APPLE. It's not on the web store.

Similar Messages

  • Apple Mini-DVI to Video Adapter doesn't fit my aluminum iMac

    I previously had a 17" white iMac (pre-Intel) machine, and about 6 months ago I bought the mini-DVI to video adapter so I could connect it to my television. Worked like a charm. But I recently bought a new aluminum iMac, and the adaptor doesn't fit into the mini-DVI port in the back of the machine. It appears the adaptor and port are both male ends.
    Has the port changed on the aluminum iMacs? The product description for the adaptor on Apple's website says it works with iMac (Intel Core Duo). Isn't the aluminum iMac an Intel Core Duo? I can't figure out why it doesn't fit and which cable I'm supposed to be using instead.
    Any advice would be appreciated!

    Hi Paul
    Yes the Intel iMac [Spec's|http://support.apple.com/specs/imac/iMacMid2007.html] call for the (M9319G/A) Apple Mini-DVI to Video Adapter!
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 19G/A
    The iBook, eMac, or iMac G5 use the Mini-VGA to Video adapter.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=722 C6629&nplm=M9109G%2FA
    Dennis

  • Aluminum Apple Remote not working well with Keynote '09 v.5.0.4

    I have an i7 17" MBP and I purchased the aluminum remote to go with it. I do training/presentations for a living and generally halfway through various presentations, the remote will stop controlling them. Sometimes if I restart Keynote it will work again. Sometimes I have to reboot the computer. Other times it just doesn't work at all.
    I can use it with my 2007 G4 17" MBP, but I haven't used it enough to see if it develops the same issues as the i7.
    I've gone to Preferences > Security > General and tried to pair the remote with the laptop, but holding down the Menu and Next keys at the same time for a few seconds...or minutes... does not bring up the "paired" graphic. I've tried the Menu button and every other key, just to be sure, with the same lack of result.
    What the hey? (And, no, "Disable remote control infrared receiver" is not selected.)

    I have the white remote stop working on my new 15"MBP occasionally too. Same as you described in the post, it happens pretty randomly. I can get it back to work doing a unpair/pair under system preference panel though. It ***** but better than restarting the computer like you did, try that next time, just takes seconds...
    after reading your post I guess I'll give up on trying to buy a aluminum remote. Logitech R400 looks very promising, if you give presentation all the time it might worth the investment.
    cheers!

  • New aluminum Macbook and S-Video

    New aluminum Macbook and S-Video
    It have come to the conclusion that the new MacBook's and MacBook Pro's can not output to S-video. I have tired the Apple Mini DisplayPort to DVI and then the Apple DVI to Video but no luck, the two do not connect as the Mini DisplayPort to DVI is missing 4 pin holes. I have tired Mini DisplayPort to VGA and then a VGA to s-video adapter but no luck, the MacBook did not even see a second display.
    Is there any hope to achieve my goal? I need s-video out for work and will have to exchange the computer for a Black MacBook if the new computer can not output to s-video.
    Any thoughts?

    *Mini Review - PC to Video EZ*
    _*It works!*_
    !http://farm4.static.flickr.com/3236/29803095101fb261f66ao.jpg!
    I, and many others, have been looking for a way to output video (composite and s-video) from the NEW Macbooks and MacBook Pro's sporting the Mini DisplayPort since Apple as yet to release such adapter. I use my computer to output video (s-video) for digital slide shows and presentations. If our new aluminum MacBook could not meet this requirement back to the store it would go.
    While searching the web for a adapter, converter or whatever could help get video out of the new MacBook I quickly learned ($10 later) that a simple VGA to s-video cable would not work.
    !http://ecx.images-amazon.com/images/I/41fD46i4gVL.SS400.jpg!
    *NO GOOD!*
    I soon came across the PC to Video EZ. It is sold at several online retailers but I finaly decided to buy it from NewEgg.com (links at bottom of post). NewEgg is retailer I knew I could trust and get fast shipping from. I ordered the converter box on Friday and it arrived today (Monday) with standard shipping!
    Bottom line, the PC to Video EZ from GrandTec outputs video (both composite and s-video) at equal quality to Apple's own video adapters used on previous (pre-DisplayPort) computers. I, owning a MacBook Pro with DVI to video adapter, could not tell the difference.
    The device itself is small. It is nothing you would complain about carrying around and it gets the job done.
    !http://farm4.static.flickr.com/3222/29803104503aa9314222o.jpg!
    *PC to Video EZ from GrandTec*
    !http://farm4.static.flickr.com/3169/2979454029c07766ce1bo.jpg!
    *PC to Video EZ with new button-less Track Pad*
    !http://farm4.static.flickr.com/3171/2979454137839fb19b1do.jpg!
    *PC to Video EZ with new aluminum MacBook*
    !http://farm4.static.flickr.com/3018/29794542513448691da0o.jpg!
    *PC to Video EZ with new Mini DisplayPort to VGA adapter (still a required purchase)*
    The back of the unit has two VGA ports, one in and one out. You can use the VGA out port as a pass through so you can still have your computer connected to a VGA monitor while outputting to video. A feature I will never use but it is still nice to have, especially for desktops.
    Also on the back is the video ("yellow" composite) and s-video out.
    !http://farm4.static.flickr.com/3150/2980310816fd29234965o.jpg!
    Back
    !http://farm4.static.flickr.com/3209/2980310910a387be2a8fo.jpg!
    *Back with end of Mini DisplayPort to VGA adapter*
    On the right side of the unit you will find a place to plug in the power adapter. Good news, its powered by USB. Bad news, the thing needs to be powered at all... More bad news, the unit does not use a standard USB cable. You better not loose the one that comes in the box! At least there are no power bricks to lug around and a simple USB to wall power adapter (like the one used with iPod or the iPhone) should also power the device. My testing showed that power is required.
    !http://farm4.static.flickr.com/3162/2980311010daa3207621o.jpg!
    *Power in. Why no USB A to USB B?*
    !http://farm4.static.flickr.com/3032/2980309856563935f1c3o.jpg!
    *USB power cable*
    The unit comes with every cable you would need which is a huge plus! Included in the box is a short VGA cable (3 feet, which is perfect), a s-video cable and a composite video cable.
    !http://farm4.static.flickr.com/3168/2979453321a01c534560o.jpg!
    *Included cables. All you need to buy is the Mini DisplayPort to VGA adapter.*
    Although not as neat as an Apple Mini DisplayPort to video adapter would be it does get the job done.
    !http://farm4.static.flickr.com/3251/29794536291b56a7febdo.jpg!
    !http://farm4.static.flickr.com/3051/2979453521fe14baa0b1o.jpg!
    *Typical Setup*
    !http://farm4.static.flickr.com/3061/29803103608b7b074438o.jpg!
    *Final Product*
    *The unit supports the following screen resolutions & refresh rates.*
    * # 640x480@60/72/75/85Hz, 800x600@60/72/75/85Hz, 1024x768@60/75/85Hz and 1280x1024@60Hz. _On my SD TV I had luck with 1024x768@85Hz. Anything larger would not display._*
    Pros:
    * Power supplied from USB ~NO BULKY EXTERNAL POWER SUPPLY!
    * No software required! (works with Mac or Windows or any OS!)
    * Composite and S-Video outputs
    * VGA IN and VGA OUT for simultaneous TV/monitor viewing
    Cons:
    * Requires power
    * Does not use a standard USB cable
    * Not as neat as an Apple Mini DisplayPort to video adapter would be
    * You still need to buy the Apple Mini DisplayPort to VGA adapter
    *Package Contents*
    * PC to Video EZ
    * User Guide
    * Composite Video Cable
    * S-Video Cable
    * USB Power Cable
    * VGA Cable
    Links:
    http://www.grandtec.com/products/video/untimateEZ.html
    http://www.newegg.com/Product/Product.aspx?Item=N82E16815117101
    I HOPE THIS HELPED MANY LOOKING FOR A SIMILAR SOLUTION. I KNOW IF I WOULD HAVE FOUND THIS POST I WOULD HAVE BEEN VERY, VERY HAPPY! PASS IT ON.

  • Apple Aluminum Keyboard slow responding after reboot

    I have Leopard installed on my external firewire drive, and 10.4.1 installed on my PowerBook. Whenever I boot from one to the other I get a very slow response from my new Apple Aluminum Keyboard and my USB trackball. I have the trackball connected to the keyboard's USB port and the keyboard is plugged directly into the PowerBook. When I boot into either system it takes a good five minutes before the keyboard and trackball respond. In the meantime I have to use the keyboard on the PowerBook and the trackpad to login, etc... I also have USB Overdrive installed on both systems, but this problem developed before I installed USB Overdrive in Leopard. Any clues?

    Does this new keyboard pair fine with the other computer?
    I can only think of two other things given the troubleshooting that has been done so far.
    This may be an OS issue (Reinstall the Mac OS) or something in or around your setup is generating interference: http://support.apple.com/kb/HT1365 (doubtful as you said you used another computer and it was fine in the same area).
    If you have already contacted AppleCare and the replacement keyboard did not resolve the issue you might want to give them a call back to follow-up so they can investigate the issue further.

  • Macbook Pro 2.53 mid 2009 came with 60 watt magsafe can I use a 85 watt without issues also can i use the new aluminum tip one?

    My macbook came with a 60 watt magsafe charger with the white magnetic tip. It crapped out on me and now need to buy a new one but everyone says it uses a 85 watt which is false since i bought it new and the 60 watt charger came in  the sealed box.
    1. If I buy the 85 watt will it damage my macbook pro?
    2. can I use the new magsafe charger with the new aluminuin tip with my macbook pro?
    Look below in red is the proof
    15-inch Configurations
    Enclosure
    Precision aluminum unibody
    Processor
    2.53GHz Intel Core 2 Duo
    2.66GHz Intel Core 2 Duo
    2.8GHz Intel Core 2 Duo
    L2 cache
    3MB shared
    3MB shared
    6MB shared
    System bus
    1066MHz
    1066MHz
    1066MHz
    Memory
    4GB (two 2GB SO-DIMMs) of 1066MHz DDR3 SDRAM; supports up to 8GB
    Hard drive4
    250GB Serial ATA; 5400 rpm
    320GB Serial ATA; 5400 rpm
    500GB Serial ATA; 5400 rpm
    Slot-loading optical drive
    8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
    Graphics
    NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
    NVIDIA GeForce 9600M GT graphics processor; and NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
    Graphics memory
    256MB GDDR3
    512MB GDDR3
    Video
    Built-in iSight camera; Mini DisplayPort output port with support for DVI, VGA, and dual-link DVI (requires adapters, sold separately)
    Display
    15.4-inch (diagonal) LED-backlit glossy widescreen display, 1440-by-900 resolution
    Expansion
    One FireWire 800 port (up to 800 Mbps), two USB 2.0 ports (up to 480 Mbps), SD card slot
    Audio
    Built-in stereo speakers, built-in omnidirectional microphone, combined optical digital input/analog line in, combined optical digital output/analog line out
    Networking
    Built-in 10/100/1000BASE-T (Gigabit) Ethernet
    Wireless
    Built-in AirPort Extreme Wi-Fi (based on IEEE 802.11n draft specification)2; built-in Bluetooth 2.1 + EDR (Enhanced Data Rate) module
    Hardware accessories
    60W MagSafe Power Adapter, AC wall plug, power cord
    85W MagSafe Power Adapter, AC wall plug, power cord
    Limited warranty
    and service
    Your MacBook Pro comes with 90 days of free telephone support and a one-year limited warranty. Purchase the AppleCare Protection Plan to extend your service and support to three years from your computer’s purchase date. Only the AppleCare Protection Plan provides you with direct telephone support from Apple technical experts and the assurance that repairs will be handled by Apple-authorized technicians using genuine Apple parts. For more information, visit Apple support or call 800-823-2775.
    Apple and the global
    environment
    Learn more about Apple’s dedication to reducing the environmental impact of our products and processes. The Apple Product Environmental Specification details the environmental attributes of our products.
    Recycling
    Apple takes a holistic view of materials management and waste minimization. Learn more about how to recycle your Mac.

    Yes, you can use the 85 watt adaptor. You cannot use the new adaptors because your computer is not equipped with the proper MagSafe connector. But you can use the older MBP adaptors as well as a 60 watt replacement adaptor. All can be found at Apple's Online Store.

  • User Contributed Tips in The MacBook 13-inch Aluminum (Late 2008) Display

    *The following User Contributed Tips are located in the MacBook 13-inch Aluminum (Late 2008) > The MacBook 13-inch Aluminum (Late 2008) Display forum:*
    <pending>
    *The following related tips are located in other areas of Apple Discussions:*
    a brody - I need Firewire for Camcorders, yet the MacBook and MacBook Air lack it
    http://discussions.apple.com/thread.jspa?threadID=1928027
    Publish date: April 4, 2009
    a brody - Using a second Mac as a display for a first
    http://discussions.apple.com/thread.jspa?threadID=1587927
    Publish date: July 7, 2008
    See also User Tips Library

    But according to OWC it will support 8gb of RAM. http://eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macbooklate08.ht ml
    and also http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3
    Check the Boot ROM Version in your System Profiler at this link:
    http://support.apple.com/kb/HT1237                       
    MacBooks with a Model ID of MacBook5,1 should have  a Boot ROM version of MB51.007D.B03.
    If your Boot ROM version does not match the numbers above, download the appropriate
    For MacBooks (MacBook5,1)
                MacBook EFI Firmware Update 1.4 (Apple.com Download)
    Once you have ensured that the Boot ROM is the correct version,
    make sure your Operating System is updated to Mac OS X v10.6.6.
    You must be running Snow Leopard to address 8GB on these systems.

  • I replaced my keyboard batteries and the light is flashing so it is in discovery mode. But I am stuck on the home page where I need to type my password, without a keyboard. Aluminum trick didn't work. What do I do?

    I shut off my computer and the next day replaced the batteries in my keyboard after getting the low battery message. After replacing them and turning the keyboard on and off the green LED was blinking which meant it was in discovery mode. The problem is I can't login to my computer because I need to type in a password. But I can't use the keyboard so I can't use my mouse to find the device because I can't login.  The aluminum ball trick did not work and I did recheck the battery life and they are in the right way. How do I fix this?

    Try resetting the iPod >  iPod touch: Turning off and on (restarting) and resetting

  • Can I upgrade my 2.4 iMac's HD (1st Aluminum gen) to a 1TB?

    Hello,
    I have a 20" 2.4GHz iMac (first generation of the Aluminum series) with a pre-installed 320GB hard disk. I'd like to upgrade it to a 1TB. Is that possible? Would my machine run a 1TB or is my maximum a 500GB?
    I need to purchase the Hard disk separately because it is not available in my country. So what exactly are the recommended specs and brands that will be fully compatible with my iMac? And what is the maximum size I can go for?
    Thank you,
    Carol

    You can go for 1.5TB if you really wanted to (kind of grey, since some PC's cant support 1.5tb properly). Pretty much any SATA 3.5 inch hard drive will work. The ones you want would be SATA or SATAII or SATA2 or SATA 3.0 (which are all the same, most companies will just call it a SATA drive. the 2/II just represents the generation of SATA which reads at 3gbps or something like that, hence the 3.0, but you dont have to worry about it, just get a SATA and it will work).
    For the 1TB lineup, I chose the Samsung Spinpoint series because it had the fastest read times compared to the rest of drives from seagate etc ect. Just make sure the hard drive is initialized before you go and install it into your imac. I did this by initializing it from my PC before sticking it in. Im not sure if you can initialize the harddrive while installing OS X, so i didnt take that chance. (Taking it apart waskind of a hassle).
    It reads everything fine at 1TB, you can get a OEM harddrive (without any cables or mounting brackets) because everything you need, you can just take from your harddrive already in there. Look online for step by steps of how to open the aluminum imac. youll need non-magnetized screwdrivers and a bunch of suctioncups to remove the plexiglassish cover.
    I would personally recommend the Samsung Spinpoints, i have 4 of them in 3 of my computers and none of them arrived dead or are having any defects. They go for about 120-150$ canadian, or about 70-130$ american. Ill admit ignorance, and say i dont know what currency Egypt uses. :P
    Remember though that theres only space for 1 3.5 inch desktop hard drive in there.
    - SATA Desktop Harddrive 3.5inch (standard desktop size)
    Message was edited by: Neoblackout
    Message was edited by: Neoblackout

  • I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8?  Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

    I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8?  Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.
    You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
    10.8 Mountain Lion is a download from the App Store, the price is $19.99.
    Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
    Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • Wireless Aluminum Keyboard Troubleshooting

    If you're having issues with your Apple Wireless (Aluminum) Keyboard disconnecting, there are a few things you can try.
    First, check your wireless network configuration to see if you can avoid interference. See this post in another topic:
    http://discussions.apple.com/message.jspa?messageID=5783742#5783742
    Although I did have success with tweaking my wifi setup, my keyboard disconnect problem returned again a couple of weeks ago. I had recently upgraded to Leopard (10.5.1) which may have contributed - although I had been using wired ethernet, and switched back to wifi around the same time as my Leopard upgrade.
    Like others have posted, I also noticed the bluetooth daemon log errors in my system log. To look for them, you can open console.app, and search for "blued" in the system.log and also its archive history. Here's an example:
    +Jan 25 09:17:22 Macintosh-2 kernel[0]: IOBluetoothHCIRequest::Create [0x55da000] Request OpCode 0000 Generated by: blued (47) status: 0 timeout 1000. has a too small timeout, a reasonable value would be 5000 (5 seconds)+
    Here are some other things to try. You should only try one at a time - so that you can tell which change fixed your problem.
    1. In the Bluetooth System Preferences panel, unpair your keyboard, and re-pair it again
    2. Also in the Bluetooth System Preferences panel, add the keyboard to your favorites. To do this in Leopard: select the keyboard in the bluetooth devices list. Click on the tasks cog at the foot of that pane (just beside the plus and minus). Select "Show more info". Select "Add To Favorites".
    3. Reset the bluetooth preferences by moving system preference files. Warning: only try this if you are comfortable using the OS X terminal!! :
    sudo mv /var/root/Library/Preferences/blued.plist /var/root/Library/Preferences/blued.plist.old
    sudo mv /var/root/Library/Preferences/com.apple.Bluetooth.plist /var/root/Library/Preferences/com.apple.Bluetooth.plist.old
    (you will need to enter your password at least once, and then will need to restart your machine).
    Keep a log of all the things you've tried. If none of these work, its probably time to call AppleCare. If you have one of the new Apple (Aluminum) Wireless Keyboards, it is still covered by warranty at this point.

    It sounds like the bluetooth in both of your keyboards has simply died. If it's still under warranty (if it has one), take it to the apple store and show them. They may give you a new one. For future reference, the new wired USB keyboard is now exactly the same as the wireless (except that it has a wire), and you won't face any bluetooth issues like that. You can get the new wired keyboard here:
    http://store.apple.com/us/product/MB869LL/A?fnode=MTY1NDA1Mg&mco=NDE4NjI4Mg
    Also, if you're willing to spend a bit more money, Macworld rated the Logitech DiNovo Edge Keyboard very highly. Here's a link to that:
    http://store.apple.com/us/product/TU938LL/A?fnode=MTY1NDA1Mg&mco=MjgzMTkxNA
    Hope this helps.

  • Aluminum Keyboard Sometimes Not Recognized By USB Port

    I have an Aluminum wired keyboard that occasionally isn't detected by my Macbook in both Windows XP (Boot Camp) and Leopard. This is an exchanged one because the first one also behaved this way. I'm not using the extension cable. I have a USB wireless mouse plugged into one of the keyboard's USB ports and a flash drive. When the keyboard isn't detected, the mouse doesn't work (no lights on the receiver, can't connect), but the flash drive gets recognized. I've also had the keyboard not be detected without the flash drive so I know that it isn't the issue.
    When it isn't detected I have to disconnect and reconnect the keyboard multiple times until it randomly starts working. Once it works, it doesn't stop working, though after going to sleep it occasionally disconnects itself on startup. All the function keys work properly and there's no updates available...is there anything I can do about this?

    I've seen the very same problem. In my case I have a wired Mighty Mouse attached to one of the USB ports on the aluminum keyboard. Every time I plug it in -- not recognized first time. Second time -- success. Highly annoying.
    Unfortunately I don't have a solution for the problem.

  • My aluminum remote for Apple TV no longer seems to connect to the Apple TV receiver; I've changed the battery, but w/o success

    My aluminum remote does not appear to connect with the Apple TV receiver; I've changed the battery.  I can turn on the Apple TV and the opening screen comes up, but the remote doesn't seem to connect...no cursor or movement on the Apple TV screen occurs.

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Kernel panic when I try to run Aluminum Keyboard Firmware Update

    Hi,
    I'm trying to run the Aluminum Keyboard Firmware Update and every time I try, as soon as I've entered my admin password I get a kernel panic. I've tried it 5 times and it's the same every time - I click Update, I put in the password and bam.
    Anyone else had this?

    If you don't get the KP when booting from the internal, then suspect a corrupt installation on the SSD or that the SSD is causing the issue. See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • New MacBook (Aluminum), new Time Capsule (Dual-Band), backups not working

    My Mom got a new (refurbished) 13.3" MacBook (Aluminum) and new (not refurbished) Time Capsule 500 GB (Dual-Band.) The Time Capsule is working great for wireless internet and we can copy files to and from it, but Time Machine backups are not working. I enabled Time Machine, selected her TC, and then when it tries to backup it sits at the preparing stage for a little while and then gives a very unhelpful "the backup failed" message. Unfortunately I don't have the exact error message, but it never gets out of the preparing phase. It doesn't stay in preparing forever, it only stays there for a minute or so before it gives up and reports the backup failed message and stops. It's unclear to me, searching these forums, if this problem is the same as others are reporting.
    I've tried turning off Time Machine and back on, removing and reselecting the Time Capsule, etc. Nothing makes a difference. There are no backup files on the TC - it's brand new.
    This happened out of the box, but I also tried installing the latest Time Capsule firmware. It didn't help.

    Apple needs to create a configuration tool that configures all the Apple devices one owns by creating a network diagram using drag and drop symbols...
    Sounds like a cool suggestion. If you want Apple to hear it, go to www.apple.com/feedback/timecapsule.html

  • Remap volume and eject keys on aluminum keyboard?

    Is there a way to remap the volume, mute and eject keys on the Apple
    (wired) aluminum keyboard?
    I'd rather have them above the keypad if that's possible - like they
    were on previous Apple keyboards.

    Something vaguely relevant from MacFixit:
    "Friday, March 03 2006 @ 02:46 PM PST
    Mac OS X 10.4.5 Special Report: Keyboard/Mouse issues
    Some users are reporting issues with specific input devices -- generally third-party keyboards -- after the update to Mac OS X 10.4.5.
    One reader writes:
    "After updating my iMac Core Duo to 10.4.5, the scroll function of the blue, middle button on my IBM SpaceSaver USB keyboard (with integrated trackpoint pointing device) no longer works. I had been using USB OverDrive 10.4.4 to gain this feature."
    Re-installing combo updater The versatile workaround of re-installing the Mac OS X combo updater (PowerPC, (Intel) works to resolve a number of odd keyboard and mouse issues occurring after the update, including inversion of mouse buttons. "
    http://www.apple.com/support/downloads/macosxupdate1045combo.html

Maybe you are looking for