OS 10.6.8.  Deskjet 3050A.  Wireless not working.

I can log into my router and ping the printer.  I can print to the printer via USB.  I cannot, however, print wirelessly.  I can, though, print through the HP eprint function (although that's because it's going through the router and not my mac).  When I ping it, I get this:  ping: sendto: Host is down
If I can reach it via the router, then the host isn't down, right?  I've shut my wireless off on the mac, turned it back on and get the same result.  I've reset the printing system.  Same result.  I've power cycled the printer.  Same result.  I've put it into the host file.  Same result.
I've worked with HP on this and they've sent me three additional printers because they thought the printer was bad, because I couldn't ping it with my mac.  I now believe it to be a localized issue, not a network or a printer problem. 
Any thoughts, ideas, and/or suggestions on what I should do next?

Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest Macs of each type that can run Mountain Lion:
iMac7,1
MacBook5,1
MacBookPro3,1
MacBookAir2,1
Macmini3,1
MacPro3,1
Xserve3,1
A computer incapable of running Mountain Lion which has a Core 2 Duo(not Core Duo) or better CPU and at least 2GB of RAM can run Lion 10.7, which is available by phoning the online Apple Store and ordering a download code for it.
(84216)

Similar Messages

  • Windows 10: HP Deskjet 2540 wireless not working anymore after upgrade.

    I was using Windows 8.1 and the printer was working fine via wireless printing. After upgrading it to Windows 10, printer stopped supporting wireless connection. It works through USB. I tried updating the software but the issue hasn't been resolved. 

    Hello MrBas,
    Please perform the below mentioned steps that should resolve the issue.
    Uninstall the existing printer software.
    Restart the PC
    Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Why deskjet 3050A J611b not working on mavericks

    Why cant i print and scan after i update to mavericks

    How does printing and scanning fail? Are you using the current drivers? Did you try removing and re-adding the printer? Reinstalling the drivers?

  • Intel 6205 wireless not working with Lenovo W520

    Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
    1) Machine Brand and Model (PC/Laptop):
    Lenovo W520
    Intel Centrino Advanced-N 6205
    Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
    2) Wireless Brand, Model and Wireless Chipset:
    $ lspci -nn
    03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
    3 ) check interface:
    ifconfig does not show wireless
    $ iwconfig
    lo no wireless extensions.
    eth0 no wireless extensions.
    4 ) Check for modules:
    $ lsmod
    iwlagn 215351 0
    iwlcore 139688 1 iwlagn
    mac80211 269644 2 iwlagn,iwlcore
    cfg80211 167809 3 iwlagn,iwlcore,mac80211
    5) Kernel boot messages
    $ dmesg
    [ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
    [ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
    [ 13.499187] lp: driver loaded but no devices found
    [ 13.502642] alloc irq_desc for 22 on node -1
    [ 13.502645] alloc kstat_irqs on node -1
    6 ) Network configuration
    $ sudo lshw -C network
    *-network UNCLAIMED
    description: Network controller
    product: 6000 Series Gen2
    vendor: Intel Corporation
    physical id: 0
    bus info: pci@0000:03:00.0
    version: 34
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress cap_list
    configuration: latency=0
    resources: memory:d5300000-d5301fff
    7 ) Scan for networks:
    not relevant as no wireless interface appears
    8 ) Ubuntu Version:
    Ubuntu 10.10
    9 ) Kernel/architecture (including 32 vs. 64 bit):
    2.6.35-28-generic x86_64
    10 ) Restarting the network:
    sudo /etc/init.d/networking restart
    * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
    [ OK ]
    Additionally, modinfo shows the following:
    $ modinfo iwlagn
    filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
    alias: iwl4965
    license: GPL
    author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
    version: in-tree:
    description: Intel(R) Wireless WiFi Link AGN driver for Linux
    firmware: iwlwifi-4965-2.ucode
    firmware: iwlwifi-5150-2.ucode
    firmware: iwlwifi-5000-2.ucode
    firmware: iwlwifi-6000g2b-4.ucode
    firmware: iwlwifi-6000g2a-4.ucode
    firmware: iwlwifi-6050-4.ucode
    firmware: iwlwifi-6000-4.ucode
    firmware: iwlwifi-1000-3.ucode
    srcversion: 8F7F4C6196599FCA596C837

    Hi  sparhk, and welcome.
    One of the Lenovo staff who frequents the forum put out a call to help you in a private forum.  I do a little Linux, so I poked into it.  To my amazement my first Google hit was your thread where you indicate you have solved the problem.  (At least, it _looks_ like you...)
    May I respectfully suggest that a post back here indicating success would be a nice touch?  That way anyone who passes by looking for help with this issue will have a better chance of finding it.  For posterity, here it is (see post number 25):
    [SOLVED] Intel 6205 wireless not working with Lenovo W520
    Glad you got it working,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • Wireless not working, iPhone 4S, upgraded to OS6, any suggestions?

    wireless not working, iPhone 4S, upgraded to OS6, any suggestions?

    Take the troubleshooting steps recommended in the User Guide.

  • Deskjet 3050A - wireless radio is not functioning

    I cannot connect my Deskjet 3050A-J611g on my wireless network.   In attempting to set up the network I get the message: "The wireless radio is not functioning.  Contact HP support".  The troubleshooting information does not appear to address this problem

    ATTENTION The wireless radio is not functioning.  Contact HP support
    diagnostic results
    >wireless 
                              --wireless on                                                                                 pass
                              --wireless working                                                                fail
                              --signal quality                                                                              not run
    >connectivity
                              --connected                                                                                    not run
                              --disconnect count total                                                              74
                              --disconnect count (last hour)                                                    0
                              --disconnect count (last 24 hours)                                            0
    >network      
                              --network name (SSID) found                                                     not run
                              --other networks detected matching your networks name no
                              --wireless networks detected                                                        0
    >settings    
                              --printer settings consistent with wireless router settings not run
                              --no filtering                                                                                      not run
                              --channel                                                                                            not run
                              --security                                                                                           not run

  • HP Deskjet 3050A wireless printing problem with Macbook Air

    Hello, I have a HP Deskjet 3050A printer that I have been using with my MacBook Air (2012 OS X 10.8.3) until a few weeks ago when it seemed to hang when trying to print and then say no printer found (even though it showed and was selected in the Printer options). So after a few weeks of this I decided to to remedy this issue once and for all by deleting the printer and 'refinding' it.
    However, upon 'refinding' printer by adding it through System Preferences no printer is found - I have updated all Macbook air software.
    All this time I have been able to continue printing wirelessly using my iPhone 4S and have changed no settings to the iPhone or 3050A which leads me to believe the proble the problem may lie with the Macbook Air?
    Can you help resolving this please? Thanks

    What router are you using?  Have you restarted it by pulling its power plug momentarily?
    If that does not work, download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Finally, reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printer :- HP Deskjet 3050A is not copying and printing properly

    Hi ,
    Could some body help me, i am tring to pring or copy my document but printer give me only paper with black and white  lines or color lines. see in attached image .
    please advise me what should i do to fix this.
    thanks
    regards
    sumit

    Hi there,
    I understand you're experiencing issues with the scanner/copier on your Deskjet 3050A printer. I'm sorry to hear this has been happening, but I'd like to help resolve this for you.
    Please click here to access a document in a very similar post that should help with your issue.
    If this series of steps does not help please do let me know and we will see what else can be done!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Satellite L300 - Wireless not working at all

    Hi everyone,
    Im new here and my name is Jodie. My husband and I bought new laptops a couple of weeks ago, the Satellite L300.
    On my husbands one the wireless just stopped working, the switch is on but no light is on. I've tried FN and F8 is says the wireless is not working. I then checked in the device manager under netwrok adapters to see if it said the same as mine and the Wireless Adapter has vanished? It's the Atheros AR5007EG Wireless Netwrok Adapter.
    Can anyone help? Can't bellieve this has happened and they are only 2 weeks old :(
    Thanks Guys
    Jodie

    >Can't bellieve this has happened and they are only 2 weeks old
    I understand what you mean but if you check this forum and all questions here your problem is not so complicated. You cannot even imagine which problems people have with notebooks. Sometimes I ask myself what people do with notebooks. :)
    Back to your problem: Jodie if there is no way to get WLAN to work I recommend you to use most radical but most effective way to test WLAN functionality install OS again using HDD recovery image. After doing this you will have factory state and all hardware components should be installed properly.
    Enable WLAN using WLAN switch, be sure WLAN is enabled with FN+F8 and scan the area.
    It must work.

  • Wireless not working at a hopeless tech person's house

    Wireless doing fine then I tried to connect the new direct tv connect kit. First step was to press my wan button on router till it blinked then press something on the direct tv connect thing. Never got it to talk to each other. But then none of my wireless things worked so I tried a unplug of modem and router and that didnt reset everything so then I hit the reset button and now my little button no longer lights up yellow. The tiny power light is flashing (not holding steady).did I ruin my router?

    Is that a Linksys/Cisco router? What is the model number? Reset again the router for 30 seconds and then unplug/replug the router for 30 seconds also. Observe after that if power light goes solid and if ever it still flash after a minute or two, try to plug the router in a different power outlet. If you get the power solid after the reset, reconfigure the router again for wired and wireless internet.
    Setting up a Linksys router for DSL Internet connection
    Setting up a Linksys router with Cable Internet service
    Different ways in setting up your Linksys wireless router

  • Wireless not working in linux, but works fine in windows vista

    Hello!
    I have installed Unbreakable Enterprise Linux 4 in a dual boot config. with Window Vista on a Compaq Presario laptop. After install completed I found that my on board Broadcom Wireless Adapter (Dell 1390 Mini PC card) was not recognized. I have tried installing NDISwrapper versions 1.48 and later 1.47 (after uninstalling 1.48) because everytime I got to the "modprobe ndiswrapper" received a fatal error about an unknown symbol or parameter, and on install I also encountered a "CONFIG_4KSTACKS" error as well. The good part is the light on my laptop for the wireless adapter finally came on and the driver (bcmwl5.inf) appears to be installed and the wireless adapter identified as being present, but it still doesn't show up in the network manager gui interface. So I am out of ideas if any one can give me a suggestion for a solution I would appreciate it.

    Hi there,,,,,
    I have Oracle Enterprise Linux 5 installed and Intel wifi 5100 card installed on my laptop. Wireless card does not work in Linux it works fine with Vista, I have dual boot. I have downloaded and installed the microcode for the wireless card for Linux,,,it is now active but it does not take ip address from dhcp and nor does it connect when i supply manual ip. it does not even scan for any wireless network. I have WEP enabled on my wireless network. It just says disconnected.....
    Please help me.....i have been trying to get this thing work for 3 weeks.
    thanks.

  • HP Laserjet Pro 1102w Wireless (Not working on MacBook Air 10.10)

    HP Laserjet Pro 1102w Wireless is not working on my MacBook Air Yosemite (v10.10).
    I tried setting it up via this link: (v10.10 Yosemite, Method 3: Wireless Setup Using a USB Connection)
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02847467#N2251
    All I get under printers is the USB kind and NOT the Wireless/Bonjour kind.
    Can anyone help me out?
    Thanks.  

    Hi @Random_Pelican ,
    I see that you are having issues setting up the printer on 10.10. I would like to help you out today.
    If the printer has a valid IPv4 address and you still can't add the printer as a Bonjour printer, most likely Multicasting is turned off on the router, since your not able to add the printer as a bonjour device and the other devices won't recognize the printer. Just call the router company and have them turn it on.
    If the printer doesn't have a valid IPv4 address please try these steps:
    Reset the printer first to clear out any previous network settings.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print out a configuration report and make sure the SSID and IP address are cleared.
    Printing a Configuration Page.
    Make sure Safari is set as the default browser. Sometime the Embedded Web Server won't open if it isn't.
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    I will provide the steps for 10.9, which should work the same for 10.10.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Here is a Youtube video of the Laserjet P1102w wireless installation on Maverick.
    Laserjet P1102w.
    You may follow the steps instead of watching the video.
    You have to connect the USB cable from the printer to the computer to install the printer as a USB device first and then configure the wireless network.
    Turn the printer on, connect the USB cable and install the Apple Update that should automatically load.
    Then go to the Apple, System Preferences, Printers and Scanners.
    Highlight the Laserjet on the left side of the window.
    Then click on Open Print Queue, click on Settings, click on Utility, click on Open Printer Utility, then click on the HTML Config button.
    The Embedded Web Server for the printer will open.
    Click on the Networking tab, select Wireless on the left side.
    Fill out this information for your network. Status make sure you select Enabled.
    Apply the settings.
    Then go back to Apple, System Preferences, Printers and Scanners and click the + sign to add the Laserjet bonjour printer. (might take a couple of minutes to appear) Make sure the printer listed beside use: shows the proper printer name and not the default driver, then click on the add button.
    Delete the USB printer from the list from the Printers and Scanners window.
    Disconnect the USB cable.
    Test the printer.
    Let me know how you make out.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • [Solved For Now] Wireless Not Working on HP Pavillion 15-n278sa

    EDIT: I seem to have fixed it for now by following this tutorial, I don't know how long it will last though: http://askubuntu.com/questions/337785/w … -c55-a5281
    Hi there guys,
    I have been having some problems with my Wireless under arch on my lapotop, which is a HP Pavillion 15-n278sa. I've had the wireless working twice before, but a reboot broke it both times. The Ethernet works perfectly fine. The first time I have no idea how I got it to work, it was a combination of a bunch of different threads and eventually I modprobed the wireless adapter and it worked (this no longer works).
    This is the output of when I try to connect to the wireless using wifi-menu:
    Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
    So I run systemctl status [email protected] and journalctl -xn and this is the output of the both respectively:
    Systemctl output:
    Loaded: loaded (/etc/systemd/system/[email protected]; enabled)
    Active: failed (Result: exit-code) since Wed 2014-03-19 11:20:53 GMT; 1min 49s ago
    Docs: man:netctl.profile(5)
    Process: 2154 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
    Main PID: 2154 (code=exited, status=1/FAILURE)
    Mar 19 11:20:52 carwyn-laptop systemd[1]: Starting Automatically generated profile by wifi-menu...
    Mar 19 11:20:53 carwyn-laptop systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
    Mar 19 11:20:53 carwyn-laptop systemd[1]: Failed to start Automatically generated profile by wifi-menu.
    Mar 19 11:20:53 carwyn-laptop systemd[1]: Unit [email protected] entered failed state.
    Mar 19 11:20:53 carwyn-laptop network[2154]: Starting network profile 'wireless'...
    Mar 19 11:20:53 carwyn-laptop network[2154]: The interface of network profile 'wireless' is already up
    journalctl output:
    -- Logs begin at Sun 2014-03-16 14:34:24 GMT, end at Wed 2014-03-19 11:24:47 GMT. --
    Mar 19 11:24:42 carwyn-laptop sudo[2237]: carwyn : TTY=pts/1 ; PWD=/home/carwyn ; USER=root ; COMMAND=/usr/bin/wifi-menu
    Mar 19 11:24:42 carwyn-laptop sudo[2237]: pam_unix(sudo:session): session opened for user root by carwyn(uid=0)
    Mar 19 11:24:47 carwyn-laptop systemd[1]: Stopped Automatically generated profile by wifi-menu.
    -- Subject: Unit [email protected] has finished shutting down
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit [email protected] has finished shutting down.
    Mar 19 11:24:47 carwyn-laptop systemd[1]: Starting Automatically generated profile by wifi-menu...
    -- Subject: Unit [email protected] has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit [email protected] has begun starting up.
    Mar 19 11:24:47 carwyn-laptop network[2301]: Starting network profile 'wireless'...
    Mar 19 11:24:47 carwyn-laptop network[2301]: The interface of network profile 'wireless' is already up
    Mar 19 11:24:47 carwyn-laptop systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
    Mar 19 11:24:47 carwyn-laptop systemd[1]: Failed to start Automatically generated profile by wifi-menu.
    -- Subject: Unit [email protected] has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit [email protected] has failed.
    -- The result is failed.
    Mar 19 11:24:47 carwyn-laptop systemd[1]: Unit [email protected] entered failed state.
    Mar 19 11:24:47 carwyn-laptop sudo[2237]: pam_unix(sudo:session): session closed for user root
    The network cards that I am using are the following (output from lspci -nn)
    02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01)
    03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07)
    This one being the wireless controller:
    02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter [10ec:8179] (rev 01)
    If there is anything more I can provide I would happily do it, I really need the wireless to work under this laptop. I know it works, I have had it working under Arch and it works under Ubuntu no problem. I am not sure if it is a driver problem, or if it's a problem with netctl. It looks more like a problem with netctl as after netctl updated it started working, and after a reboot it broke again.
    Thanks so very much everyone,
    Bacondrinker
    Last edited by bacondrinker (2014-03-19 13:47:15)

    Synaptics Touchpad driver:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-124009-1&cc=us&dlc=en&lc=en​...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Wireless not working after suspend (madwifi)

    Hi there
    I successfully converted from Vista to Archlinux! Everything's working fine (yep, I'm a bit proud as this my second try at linux ) except that after I suspend with powersave my wlan is not working anymore. I've also tried to unload the ath_pci module and restart the network in /etc/powersave/sleep but that doesn't seem to work.
    I guess it has something to do with the network deamon because when I try to restart my network manually it says that dhcpcd is already running for ath0... Oh, and also the iwconfig for ath0 seems to be perfectly correct after suspend...
    Here's the network part of my rc.conf:
    lo="lo 127.0.0.1"
    eth0="dhcp"
    ath0="dhcp"
    wlan_ath0="ath0 essid FeelGood key s:******"
    WLAN_INTERFACES=(ath0)
    INTERFACES=(lo !eth0 ath0)
    Any ideas? Help would be appreciated

    Well, maybe you already know this, but: ath_pci (the madwifi driver) is among blacklisted modules (/etc/hibernate/blacklisted-modules), so it gets unloaded during the suspend process. That screws up whatever wireless connection you might have had before suspending. Now if you have the option LoadModules auto in /etc/hibernate/common.conf, it should get loaded after resuming - but that of course doesn't renew the connection. So that I do is I have a short script that calls /etc/rc.d/network restart, and I run it manually after suspending to renew the connections.
    BTW, I have this in /etc/hibernate/common.conf:
    UnloadBlacklistedModules yes
    LoadModules auto
    EDIT: Eh, B managed to post before I finished writing this :)
    Last edited by bender02 (2007-05-05 14:32:11)

  • S10-3 Wireless - not working with Windows 7

    Hi, I bought the S10-3 two days ago and decided to load windows 7 (ultimate). The load was smooth but after I had finished the wireless was not working nut the wireless light on the front of the PC was on. The first strange thing I noticed was Fn5 did not work so the only on/off control I had was on the side switch. I eventually fixed this problem by downloading the driver from the internet , the wireless is the Atheros AR9285. Everything was well and proceeded to download anti-virus and other software.
    Then disaster, during the time of downloading windows had also been doing some updates and when the system restarted there is NO WIRELESS.
    It appears on boot that the "wireless" light indicator is ON and when windows fires up it goes off, I checked in the boot and it is enabled, I checked the driver again but it is OK but windows says it is not switched ON but I have checked the physical switch and it is ON.
    Any ideas appreciated.
    edit : correct machine model in postname 

    Hi and welcome, if all possible is switched on.. did you install the lenovo energymanagement ?
    where you can switch (softwarebased) seperately wireless devices... if wifi still isnt work...
    you have to bite in a sour apple and install windows 7 from a scratch again ... then first update all via windows updates , then ... install the lenovo energymanagement... , then, look in devicemanager if there is some questionmark ...  in normal case there is no need other driver to install...
    and all should be working... simply install a antivirus-program.. and all your need other personal stuff...
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Maybe you are looking for