OS 10.6.8 doesn't allow duplex printing on my HP all-in-one printer

After upgrading to 10.6.8, duplex printing option has disappeared from my print options  for my HP officejet 909g printer. It worked prior to tis particular upgrade. Any thoughts?

See if there is a driver/software update for your printer over at HP.
Their support is excellent as well, one of the best in the industry.
Good Luck.

Similar Messages

  • WINDOWS 10 DOES NOT ALLOW ME TO SCAN ON THE ALL IN ONE HP 3055.

    INSTALLED WINDOWS 10. HP 3055 PRINTS WELL BUT DO NOT SCAN. SCANNER CANNOT BE DETECTED BY COMPUTER HOWEVER IT SHOWS AS A DEVICE ON COMPUTER.

    Hi, Please try new driver from the following link:    http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-3000mfp/All-in-One-Printer-series/1161389/model/1140780#Z7_3054ICK0KGTE30AQO5O3KA30R1 Good luck.

  • Can't duplex print B4 paper size with Snow Leopard and HP8100N

    Apple print drivers dumped the standard European paper size B4 (see ISO 216 for specs) many OS's ago, however, I was able to duplex print B4, which is a standard size for the HP8100 trays, using the HP Duplexing accessory, by specifying a 'custom' paper size (10.14 x 14.33). Now, with Snow Leopard and the 10.6.4 and the updated HP8100 print driver from Apple, I get the message "The Duplex Option, Flip on Short Edge" is not available when the destination paper is set to Custom."
    It seems the easiest solution would be for Apple to bring back the B4 paper size--I don't know why they eliminated it. The next solution would be for Apple or HP (whoever is responisble for the print driver) to back up to whatever allowed duplexing of custom sizes in all recent OS's up to Snow Leopard.
    I have thousands of pages of music to print and manual duplexing just isn't an option. Anybody have any work-around ideas?

    try converting your cmyk  doocument to rgb and then print

  • Can the Canon Pixma ix 6520 support manual duplex printing?

    I know that this printer doesn't support duplex printing but I was wondering how would I double side print manually with the canon pixma ix6520?
    Thanks!

    Hello thekay94.
    Manual duplex printing can be done by printing on one side at a time. 
    If you are printing from a Windows computer, please select the Duplex printing option in the Page Setup tab of the Printing Preferences menu.  If you are printing from a Mac, please use the options in the Layout menu to print the odd pages first, then load the stack back in the printer with the blank side facing you to print on the even numbered pages.
    If immediate assistance is needed, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Duplex printing not available on Photosmart 5510 properties window

    My Photosmart 5510 All-in-One has avery limited choice  when I go to properties options i.e no duplex printing (which I use regularly) no choise for colour , gray or black and few others diferent options. My old HP Al -in One had a fantastic number of options to choose from for printing.
    I've noticed that only the Basic driver is downloaded and installed and I can not get it to download and install the full version. I have tried with the installation CD it came with as well as directly from HP web site.
    Can anyone help?

    Is there a link for installing the Photosmart 5510 all-in-one on a Mac with OSX?  My friend needs to have draft mode available and I will be installing this new printer for her.  Too bad it doesn't offer duplex printing.
    Judy

  • Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page...

    Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..

    [BUG FIXED, see "EDIT 2" at the end of my post]
    I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
    Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
    I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
    I hope this helps!
    EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
    https://github.com/greasemonkey/greasemonkey/issues/1406
    EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful!

  • HT5527 How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."

    How do I choose the $40.00 Icloud plan? When I attemp this, it doesn't allow me to click "next."
    The only way it allows me to click "next" is if I choose the $100.00 plan. The email that was sent to me says that I should upgrade or reduce storage because my plan will be reduce to 5GB as of September 30, 2013. Please advise.

    Try Settings>iCloud>Storage & Backup>Change Storag Plan.  If you are a former MobileMe user you should see Purchase Current Plan listed between the 20GB and 50GB options.

  • Migration Assistant doesn't allow me to choose what drive.

    Well, I got my new computer. I tried to migrate a drive from my old computer using Migration Assistant. and it doesn't allow me to choose what drive.
    In my old computer I have 5 drives. The original HD (was 10GB, was replaced last year by a 40 GB) and on my Hitachi 250 GB drive that I added 2 years ago, there's a partition with 4 drives.
    I wanted to migrate one particular drive from there (called Current work).
    First I did a mistake. I connected both computer via the firewire in the afternoon when there was enough daylight so I don't have to do it later at night (the computers are under the table.) I thought it's OK since I'm not pushing any button yet ("migrate now", "transfer", and such).
    I turned on the new computer and a message appeared: you must restart.
    That's strange, I said to myself. it's a brand new computer. Usually It says that when there's a problem, but OK I restart and when it's back on, I see that my external drive (Neptune from OWC which was still hooked up in the old computer) is on the desktop. And it took just a few seconds. I open it and all the files, etc. are there. It did copy the whole external drive !
    I'm not an computer expert but I believe the Mac Pro did notice that's there's a firewire hooked up and then, without asking me, migrated the external drive and that's why it asked me to restart. I would have prefer if it tells me "restart so migration can begin".
    I don't mind for now that my external drive is on my new computer. I can always erase it if I don't want it. It is still external right ? so it doesn't intrude on the 640 GB of my HD so I just keep it.
    But it also copied/migrate Mac HD 40 GB which is full of OS 9 and I almost never use it anymore. I don't want it coz it has applications and they advise not to migrate applications (certainly not applications with issues).
    They say migrate folders, settings but re-install applications.
    And it migrated also another drive called "Scratch" which has only personal date no system, no software.
    Anyway, I erased everything and re-installed using the Install disk that came with the computer.
    BTW, what they say in the manual (p. 90: Re-installing the software that came with your Mac Pro) is different than what really happens.
    They say insert disk, double- click on Install and then click options in the "Select a destination" pane of the installer. Then click "erase and install" Problem is: there's no "Select a destination" pane. Or any options.
    I had to go to Disk utility and erase, then re-install OS X.
    Then re-install the applications using "Install applications" (the other disc that came with the computer. )
    OK, I did that. Then while everything is empty, new, I used Migration Assistant.
    Now here is the reason why I post this.
    They say hold T key until you see a firewire icon then select a drive. I can't see when there's an icon coz I have only one monitor, so I just hold and hold the T-key and turn on the old computer. The screen shows "waiting for you other computer to restart" 2 min.... 5 min... 7 min. Nothing happens. I stop holding.
    I look at the desktop and I see that the icon of the old 40 GIG Mac HD is there. (and I believe with a firewire logo, but not sure about that.)
    I have the impression that if I kept the T-key longer it would have migrate the other drives as well.
    They say keep the T-key down until you see the firewire (then let go I suppose. As I said I don't see what's going on on the desktop of my old computer so I kept the T-key for a few minutes. I also tried another time to let go after 1-2 min. No difference.
    I shut down the new comp. and the old computer screen appears automatically (both are connected to the monitor; the old with analog port, the new with digital port) and sure enough the firewire icon is moving on the screen.
    I go back to the new computer and put the old 40 GIG Mac HD in the trash. Actually, when it touched the trash, I just saw an eject icon and the drive disappear. Did not go in the trash which is empty. So I guess I ejected, not sure what's the difference but I looked for it to see if it's anywhere in the computer. Could not find it. Not in the HD, not in the desktop. Good, I don't want it there. Is it hidden somewhere ?
    So I tried again but wondering perhaps the old computer should RESTART not turn on (it was off) so now I wait until it's on, then push restart. I hear the gong when it shuts off but that's it, no other gong when it comes back. I keep the T-key. But nothing happened. Just see the message "waiting for your other computer to restart"
    PS: BTW Target mode (which seems to me similar to Migrating with "Migration Assistant") will not work for me because it must be SATA, mine is ATA.
    I didn't try but read that it has to be SATA.
    Is it the same ? In migrating they say hold down the T-key (T for target)
    And how come that my 40GB HD which is ATA did migrate (not that I wanted too but still).
    Also, this drive ("Current Work") that I want to migrate to the new computer is in my external drive. Can't I just drag it ? If it has only personal data, files and folders I know I can, but It has system (OS X) and applications. It's the one I use and boot on, in my old G4 but I want to transfer Files and folders and settings, so the new computer will know what are my Safari preferences, Automatic fill-in, and perhaps it will move my iTunes music Library too ?
    Basically everything except applications. Although I would like my Nikon scanner to be in the new computer as well as the LaCie DVD recorder but I guess I can do that later, separately ?
    What are the settings or info I need ? Because if it's just Safari preferences, automatic fill-in and other such small thing, it might be better to just do it again in the new comp and forget about the hassle of migrating.

    Try getting into Windows and then plugging in the Superdrive. The drive will only be attached to one OS or the other, not both.

  • Duplex printing doesn't work on HP Laserjet 3055

    Hi!
    I am a new rMBP user and I need your help with setting up a printer. I want to use my old printer HP LaserJet 3055 for both side printing - using Widnows I didn't have any problem with that. The printer supports manual duplex printing - it means - print odd pages - beep - then I put sheets into the tray and click button - even pages. I use this printer via network.
    I was thinking about solution for a few hours. I've tried:
    installing printer with PCL, Postscript drivers,
    downloaded HP drives from Apple (even app store installed some kind of upgrade but doesn't include 3055)
    using HP Laserjet 3052 drivers (it's default choice by OS X)
    upgrading remotely printer drives using ltr command in Terminal,
    installing printer via USB,
    even installing Gutenprint and then hpijs with some sh**
    The printer is printing but not on both side My first impression about  OS X Yosemite and rMBP is awsome and I know that using so old devices may cause problems but I cannot change my printer.
    Help my guys, please!!
    PS Sorry for my English

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do I edit a document I saved?  It doesn't allow me to edit, just fill in on top of my entries

    How do I edit a document I saved?  It doesn't allow me to edit, just fill in on top of my entries.@

    Adobe Reader (the focus of this forum) cannot edit PDF files (Adobe Reader is only a PDF viewer).
    Be well...

  • Pages 5 Document Endnotes doesn't allow text continuation onto next page?

    For large blocks of endnote citations, Pages 5 doesn't all the text to flow down to the end of the page before going to the next. Rather it treats the endnote text area as its own section, thereby moving the entire text box to the next page. This is problematic from a formatting standpoint because it wastes page space, does anyone have a workaround or suggestions?
    Example:
    Citation 5 is long but I would like to keep it on the same page as Citation 4 and just let the text continue onto the next page. However Pages 5 doesn't allow me to adjust the endnote text box and just jumps to the next page. Rarely do you see endnotes arranged in this manner in high-level research reports and we can't have this.

    I exported a PDF from Pages v5.2.2. This uses Apple's Quartz PDFContext, not Quark.
    In Windows 7, I opened this PDF with Adobe Acrobat Reader v11.0.09. I then copied/pasted a paragraph of this PDF content into LibreOffice Writer (v4.3.2.2). Since there was Baskerville in Windows 7, this comment pasted correctly including font-size. I did not have to make any adjustments to LO to accept this text.
    On Ubuntu Linux 14.04, with the latest updates, I opened the same PDF in Evince, the default PDF viewer. Adobe does not offer an Acrobat Reader download for Linux. Again, I copied and pasted a paragraph of content from the PDF viewer into LibreOffice Writer. As there was no Baskerville installed, Writer defaulted to the Liberation font, at the correct point size.
    In either of these platform scenarios, there were no anomalies with sentence/paragraph newlines .vs. carriage return issues from the PDF document during copy/paste operations. These were default control-v pastes that did not use the Paste Special menu item in LibreOffice.

  • NTFS Partition Doesn't Allow Programs To Access It [SOLVED]

    Hello all,
    First of all, I have finally returned to Arch after several years of using Linux Mint. It feels good to be back in a bloatware-free environment, and I'm enjoying my 1 second boot times! Unfortunately, this hiatus has caused me to lose much of my former Linux knowledge base.
    My System:
    $ inxi -Fxz
    System: Host: MSIGS70-ARCH Kernel: 4.0.4-2-ARCH x86_64 (64 bit gcc: 5.1.0)
    Desktop: KDE 4.14.8 (Qt 4.8.6) Distro: Arch Linux
    Machine: System: Micro-Star product: GS70 2PE Stealth Pro v: REV:1.0
    Mobo: Micro-Star model: MS-1772 v: REV:0.B
    Bios: American Megatrends v: E1772IMS.106 date: 04/30/2014
    CPU: Quad core Intel Core i7-4710HQ (-HT-MCP-) cache: 6144 KB
    flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 19961
    clock speeds: max: 3500 MHz 1: 2500 MHz 2: 2500 MHz 3: 2500 MHz 4: 2500 MHz
    5: 2500 MHz 6: 2500 MHz 7: 2500 MHz 8: 2500 MHz
    Graphics: Card-1: Intel 4th Gen Core Processor Integrated Graphics Controller
    bus-ID: 00:02.0
    Card-2: NVIDIA GK104M [GeForce GTX 870M] bus-ID: 01:00.0
    Display Server: N/A driver: intel Resolution: 89x69
    Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
    driver: snd_hda_intel bus-ID: 00:1b.0
    Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
    driver: snd_hda_intel bus-ID: 00:03.0
    Sound: Advanced Linux Sound Architecture v: k4.0.4-2-ARCH
    Network: Card-1: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller
    driver: alx port: c000 bus-ID: 04:00.0
    IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
    Card-2: Intel Wireless 7260 driver: iwlwifi bus-ID: 05:00.0
    IF: wlp5s0 state: down mac: <filter>
    Drives: HDD Total Size: 1128.2GB (61.7% used)
    ID-1: /dev/sda model: TOSHIBA_THNSNJ12 size: 128.0GB
    ID-2: /dev/sdb model: WDC_WD10JPVX size: 1000.2GB
    Partition: ID-1: / size: 29G used: 5.4G (20%) fs: ext4 dev: /dev/sda5
    ID-2: swap-1 size: 17.83GB used: 0.00GB (0%) fs: swap dev: /dev/sdb3
    Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 25.0
    Fan Speeds (in rpm): cpu: N/A
    Info: Processes: 182 Uptime: 33 min Memory: 1191.8/15971.7MB
    Init: systemd Gcc sys: 5.1.0 Client: Shell (bash 4.3.391) inxi: 2.2.21
    The Situation:  I have a separate hard drive formatted to NTFS, which I use for my file storage on all of my OSes (I have 4 right now, including Windows 8).
    The problem:  Despite configuring the mountpoint (/media/aaron/data) to mount under my user, aaron, and the 'all' group, other applications do not have any access to the /media/aaron/data directory. Because of the fact that it is NTFS, and I am multibooting with Win8, I cannot simply chown the directory and subdirectories to my name. Instead, I had to amend the /etc/fstab to mount the directory under my user and group, which is where I believe my problem is.
    Background:  I have searched for hours on the internet, including the Arch forums to find a solution and the best I have found is a post here (answer #1) which at least allows me to access the directory through the file manager (Dolphin). I first noticed the problem when trying to download a torrent file using ktorrent. Ktorrent spat out the following message:
    Cannot create /media/aaron/data/Downloads/wattOS-R8-32bit-mate.iso: Permission denied
    Now, I think I have isolated the cause, however I have no idea how to fix it. I believe the cause is that only owner has permission to view and modify content. Group has permission only to view content. Other has no permission whatsoever. I believe that I need to somehow allow all of the users to have read and write privileges. It would be a simple chown, if it weren't for the fact that the FS is NTFS. I need some amendment to my fstab that will achieve this result, but I have a limited understanding of the various fstab options and masks.
    My fstab file reads as follows:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    # /dev/sda5
    UUID=b1b2ca8c-e7fc-42a2-aabb-a2c3208c2a65 / ext4 rw,relatime,data=ordered 0 1
    # /dev/sdb3
    UUID=7381274f-2aea-4960-a45e-4fe2c7afac9f none swap defaults 0 0
    # /dev/sdb1 DATA on /media/aaron/data
    UUID=B64C82184C81D391 /media/aaron/data ntfs uid=1000,gid=100,dmask=027,fmask=137 0 2
    it is /dev/sdb1 that I am configuring, and the options shown above are what allow me to access the directory using my non-privileged account.
    I am sure I have probably forgot something, forgive me, it has been quite a long time now! Thank you all in advance, I appreciate anyone who takes the time to give this a wee bit of thought!
    Let me know what information you require, and I will see it delivered promptly,
    HPG
    Last edited by hotpepperguy (2015-05-30 13:50:12)

    UPDATE: 
    I installed the package ntfs-3g to my system, as per the  Arch Wiki instructions, and then set the fstab options as follows:
    UUID=B64C82184C81D391 /media/aaron/data ntfs-3g uid=aaron,gid=users 0 0
    Just setting the uid and the gid alone allows permissions to be granted to all groups, so this is obviously not a solution for a multiuser system. As for a single user setup - it is perfect.
    cheers,
    HPG
    Last edited by hotpepperguy (2015-05-30 13:55:31)

  • Trying to change the country from my apple account!!!and doesn't allow me to!

    Hello, i'm trying to change the country of my apple account to get in to the istore online from my country and the system doesn't allow me to. It says that i have to buy something for $0.43 that i have on my account but i've never buy or anything b4.help!
    I don0t know how but when i entered the first time to Apple ID, i've already had an account... and i've never created one!
    Just was created with my same hotmail account and i am using it since then..... (4 or 3 years ago).
    This account is from US.
    But each time that i try to change to a peruvian account to enter itunes.... and maybe get a purchaise... it says that i am not allowed!!!
    And i want to cancel the money i have in the "ghost account" that i've never purchaise... and set a new one with $0.00 !!! to start to used it....!!!!
    Please give me a solution right away!
    Best regards.
    Rosa Elena

    Click here and ask the iTunes Store staff to zero your account balance.
    (99669)

  • Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

    Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

    1. Use the mouse to select the field and then press the space bar.
    2. A null string is the same as zero. What is the result for division by zero?

  • What do I do when trying to send a reply email and it won't send because it doesn't allow relaying?

    What do I do to be able to send a reply email when the response is it doesn't allow relaying?

    Try this and see of you can get the reply to go through.
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    How to fix
    If this is an AOL issue, try these: go Settings > Mail, Contacts, Calendars > select your AOL.com account > SMTP from the Account Info Page > SMTP from the SMPT Page > make sure that the Server is ON, make sure that the Host Name is smtp.aol.com. Further make sure your username and password are correct and added in the Outgoing Mail server; make sure that Authentication is set to Password and make sure that Server Port is 587
    If this is not an AOL email: go Settings > Mail, Contacts, Calendars > Accounts >Account Info > SMPT> turn off primary server, turn on other (e.g. AT&T) SMTP server.
    Go into Settings > Mail, Contacts, Calendars > Your Account > Outgoing mail Server SMTP > Primary Server then turn Server ON and fill in both User Name and Password under Outgoing Mail Server.

Maybe you are looking for