OS 10.6.8 OS and I-mac Hard drive accessed almost constantly and ties up software trying to run including displayany solution?
OS 10.6.8 OS and I-mac Hard drive accessed almost constantly and ties up software trying to run including display. Any solution? My other I-mac no problem.
10.8.6? I think you mean 10.6.8.
Similar Messages
-
I have an alias of one of my external hard drives in my trash. When I tried to delete it, it showed that I was deleting 80,000 files and counting. I stopped the delete process and when I clicked on "show original" all my external H.D.'s and my Mac hard drive show up. How do I delete this alias from the trash without loosing all my files? When I tried to drag it back to the desk top, it just made a duplicate and remained in the trash. When I turned off the external H.D., the trash was then empty. Tried rebooting the computer and then turning the external hard drive back on and the alias shows up in the trash again. Much help appreciated.
RichIn Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474 -
How can I have my contacts on the cloud and my Mac hard drive?
How can I have my contacts both on the cloud and my Mac hard drive?
go to icloud.com
-
My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?
You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac. -
How do I unlock my external hard drives one has photos on them one is trying to run time machine and is not able to complete a basck up.
VK said for locked HDs and volumes at http://discussions.apple.com/thread.jspa?threadID=2329689
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/* -
Accessing Time Capsule and linked external hard drive from other devices and copying to these drives
Hi
Please be gentle. I am not that technically able :-)
I have managed to set up my time capsule. Router working, external hard drive linked, time machine back ups working...
The last thing I am looking to do is to access files on my time capsule and also external hard drive (linked to it), from Mac, Iphones, Ipads, Apple TV, Windows laptops X2. Am I able to do that? Have read so many discussions but dont get the answer. Please be gentle :-)
Regards
TommyThe last thing I am looking to do is to access files on my time capsule and also external hard drive (linked to it), from Mac
This should be automatic.. find the TC disk under shared in finder.. double click it and see under the data folder.. you can create new folders in there.
Note using the TC for data and TM backups is not the greatest of ideas.. please read pondini.
Q3 here. http://pondini.org/TM/Time_Capsule.html
The external drive is fine though..
Now it can have loads of issues if you run Mavericks.. so if you have trouble.. do not be surprised.. if you run Mavericks.. be surprised if it works without trouble.
Iphones, Ipads
iOS devices are not file based.. they are not intended to be used with a file device like TC and will neither backup to it nor open files from it.. of course what apple wants and what users want are different things so there are plenty of file apps to help you read and write files.
Filebrowser is the major one.
http://www.stratospherix.com/products/filebrowser/
You still cannot backup though.. iOS uses itunes to backup or icloud.
Apple TV
There is nothing you can do with AppleTV.. it is not a file device at all.. it is not even a media player.. it is a streamer. (Early model Gen1 and Gen2 can be jailbreak.. so they do actually have media player ability) Gen3 is tied to its mother's (iTunes) skirts with steel cables.. no JB.. no use really. If you want to play movies from a TC buy a WD Live TV.. it is a player.. !!
Windows laptops X2
You can access the TC from windows..
1. Make sure the TC naming complies with windows networking.. to put that simply.. all names should be short, no spaces and pure alphanumeric. Apple wizard will recommend a name for the TC, like
Fred Blog's Airport Time Capsule.. this is wrong on so many levels.
It will be a total pain on windows.. use FBATC or TC or anything you like.. as long as it follows the rules..
Short 2-20 characters.. less than 10 is better.
No spaces.
Pure alphanumeric.
All names must comply.. TC name and wireless name/s
2. Load the airport utility for windows into the computer.. you can download for up to win7.. apple haven't bothered with windows since then and are pretty out of date. The win7 utility will load on win8 with the usual voodoo and astrological help.
3. Windows must be set to home for location.. if you cannot open a command window and ping the TC by ip and name, then pull down the firewalls.
4. In windows explorer type into the address bar directly.
\\TCname or \\TCIPaddress (using, of course, the real name or real IP). -
New Computer and New External Hard Drive - why do folders and photos not show up?
I replaced my desktop with a new laptop and external hard drive. I transferred photos from the desktop to the external hard drive. Lightroom 2 only shows the mapped hard drive, but does not show any folders or photos. Can Lightroom be set up to house all the photos on an external hard drive rather than using space on the internal laptop hard drive? Do the photos and folders need to be imported again into LR2? The photos are available for viewing when you search folders, but they open up in Photoshop not LR2.
What should I do to configure imports to be housed on the external hard drive? Is this wise? I will not be able to hold all the photos on the laptop internal hard drive. Photos used to be JPEG and DNG from D700. I am starting to see NEF. Does this replace DNG? Besides RAW I also need to have JPEG for other family members to access photos on other computers connected to the network. I am watching a tutorial DVD and slowly picking up how this all works. Let me know if I am not using the correct terms.
Hardware: HP laptop w/64bit, Buffalo 1TB RAID hard drive.Lot's of questions here. I'll do a few.
Yes Lightroom can work with images on external drives. As many drives as you want.
I assume from what you said in your original post that you have had lightroom installed on the old desktop and now wish to transfer your catalogue and all files to the external drive and work from that.
So what you would do would be to transfer the entire contents of the lightroom folder on your old computer, except for any images, to the same location on your new laptop. This would include the catalogue files and any folders containing previews. Then you would copy all your image files to the new external hard drive. When you open lightroom you can then select the catalogue you copied from the old computer and open it. In the the folder pane in the library module you can then right click on one of the folders and select "locate missing files". Then you just need to point light room to the new location of your images. You may or may not need to regenerate all your previews.
I store all my images on external hard drives and I even run the catalogue and previews from the same external drives. I have backups of all my images of course. I have light room make backups of the catalogue to the C drive on my laptop so that the original and the backup are stored in different locations.
NEF is the proprietary file system for raw images used on Nikon cameras. DNG is a universal raw file format developed by Adobe. You can convert your files from NEF to DNG on import, but as Lightroom can read both types of files it is not necessary. At this point in time if you are using lightroom you should get similar results from either type of file.
To store imports on the new external drive you can you tell light room to copy the files to the new drive or you can manually copy the files to the new location and have light room import From the current location.
Hope this helps
Gordon -
IMac Had Many Issues and Now Internal Hard Drive is named Media and...
My iMac had the error where when you turned off the iMac it would freeze at the apple logo. I then tried verifying it using Disk Utility and it failed. So I just said because I have it backed up Ill reinstall mac and install the backup, but now my Internal HD became named Media and now claims to only have 0 bytes, help!
Your HDD is dead, contact Apple and see what they can do.
-
Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook, and wiping the hard drive for a complete reset.
A PowerBook G4 can't run Snow Leopard OS 10.6, however, it can run Leopard OS 10.5. But you must use a retail (black) Leopard install DVD.
What does the selling of your MacBook have to do with installing Leopard on your PowerBook?
Cheers, Tom -
Firfox consumes lots of CPU. Hard drive is always spinning and clicking w firefox. RUNS SLOW.
Firefox is pretty much unusable early in a session. Gets better aftyer a while,say 10 minutes.
I too have a similar problem except I think mine is flash related. It's fine when just surfing and watching news/videos but when I play a flash game the hard drive starts spinning constantly and it takes minutes to switch applications or shut the game down. This usually happens at the beginning of a flash game, settles down for a while, and after 45-60 minutes it starts up again but the hard drive keeps spinning for another 15-30 minutes then settles down again for an even shorter amount of time and then repeats the cycle. It started doing this to me in firefox 6, but I've since upgraded to 7.0.1 and flash is up to date. I've run all the malware/virus checks, tested the drive, but can not find anything wrong. If I manage to get the resource monitor running, firefox plugin container usually is reading my pagefile.sys at 40-50 million bytes/min, plus a few more firefox entries running in the low millions/min. I know flash is a memory pig but I have 2 gig memory plus the virtual memory which I tried a couple of custom settings and then set back to default, with no change in performance
-
I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?
dj_paige wrote:
however, I do point out that obtaining an additional hard drive and not throwing anything away seems a preferable solution to me.
heidie22, dj_paige has a very good point there. I would not through away the NEF files; I would archive them to a external drive.
By the way, I am assuming that converting RAW files to DNG is a decision you have made and not an accident. -
I want to use my 1TB Seagate Hard drive for time machine and transferring files from Mac to PC.
For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
Thanks in advance.To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC -
I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?
Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/ -
Backing up Mac HD with Time Capsule AND an external hard drive
I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
Thanks.Rheopaipo wrote:
I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
I don't think it's possible to configure Time Machine to back up to two locations without modifying its settings frequently.
You might consider using that external drive to hold a bootable backup. You can create such a thing with either of the utilities SuperDuper! or Carbon Copy Cloner. If you pay the registration fee for SuperDuper! (~US$28), there's a mode where it will back up only what has changed, which makes the backup operation run quicker. (Carbon Copy Cloner may offer a similar feature.) -
I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
TC was designed to backup your Mac. The TC literature is pretty clear about this:
If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
Have you thought about what will happen when....not if....the TC has a problem? Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
Then, the TC will backup both your Mac and the hard drive. So, you have original data on on one drive and backups on another drive.
That would be a minimum backup plan. Most of us have more than one set of backups.
Maybe you are looking for
-
How to Convert internal table data into text output and send mail in ABAP
Hi All, Good Morning. Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment. But thought of doing it without excel. I mean, I have an internal table whi
-
How to make a BW system non-modifiable?
Hello, How do i do that? Also what if i have to keep only the infopackages open for creation? Regards, aby
-
We have a interface File to file in which we are picking up the file from the ftp server. We have three different files provided. In FCC we are passing the whole data as a single row. We have tried different encoding of the files - UFT-8, UTF-16 and
-
Oracle Version 9.2.0.2 I'm trying to improve what is currently terrible performance with BI Beans!! I have 1 fact table with 3 dimensions, and 1 hierarchy, stored in a simple star schema. I've defined my metatdata using OEM. Reading the 9i OLAP Users
-
Before installing new activation-free version of CS2, during uninstall of old Photoshop, should I ke
Before installing new activation-free version of CS2, during uninstall of old Photoshop, should I keep or remove preferences and should I use standard or advanced uninstall?