OS 10.8.3 can't connect to Apple TV through Airport

I have an Apple TV, MacBook Pro, iPad, iPhone all on an Airport WiFi network.  I can control the Airport or use the Airport for Airplay form both my iPhone and my iPad, but cannot from my MacBook Pro.  So, this leads me to think there is a software issue between the MacBook Pro running OS 10.8.3 and my Airport WiFi network.  My recollection is that I have not been able to communicate from the MacBook Pro to the Apple TV since I upgraded to Mountain Lion.  As an interesting side note, I can access and play my iTunes library on the MacBook Pro from the Apple TV device.  Is there a way to correct this configuration?

Here is info:
Airport Utility finds an Airport Extreme with 802.11n(fast ethernet)
Base Station Name: Home
IP Address: 10.0.1.1
Airport ID: 00:19:E3:FA:A8:32
This is not the IP address of the modem. Even though light is green on Base station the ATV doesn't make the wireless connection.

Similar Messages

  • Can't connect imac to internet through Airport Express

    Hello
    I am trying to connect my new imac (2.4Ghz,OS X 10.5) to the internet through my Airport Express (v6.3) but have encountered some problems.
    The set up goes like this:
    Cable Internet <wired> TP-LINK Router <wired> AE <wireless> imac
    The internet is coming from my landlord on the bottom floor of my apartment so I can't change the router.
    The router is assigning a static IP to my AE (192.168.5.101).
    I am using WEP 128 bit security.
    I have set the AE through Airport Utility to act as a Bridge.
    On the imac I set the Network preferences to manually select an IP address (192.168.5.110) which is out of the range of the Router (192.168.5.101-108).
    The AE connects and lights up green and the imac recognises the AE but I still cannot access the internet...
    I have also tried to wirelessly connect my PC laptop to the AE using other static addresses but I still can't connect to the internet.
    Can anyone please help??
    Regards
    Starwolfgang

    Hello Starwolfgang. Welcome to the Apple Discussions!
    The router is assigning a static IP to my AE (192.168.5.101).
    Are you sure that this provided IP address is static? If so, you also need to note the provided DNS server(s) IPs as well.
    On the imac I set the Network preferences to manually select an IP address (192.168.5.110) which is out of the range of the Router (192.168.5.101-108).
    Since you configured your AX in bridge mode, your computer will be dependent on the NAT (& possibly DHCP) services provided by your apartment's router. Assuming that your landlord doesn't filter out any IP addresses and that the IP address you set is valid, you need to compare your iMac AirPort's DNS server address settings with that provided by your apartment's router to be sure they match.
    Finally, assuming that your apartment provides you with an Ethernet jack, if you connect your iMac directly (via Ethernet) can it access the Internet?

  • How can I connect my Apple TV and Airport Express to the rest of the network for the least lag?

    Hey guys,
    I have an Airport network here in the office.  All new Airport Extremes.  The internet comes into one, which then connects to our switches, which then connects to other Airport Extremes over ethernet.  Everything is setup to create its own network with the same SSID, and only the leader is the DHCP server.
    I recently added an Apple TV to the network, only it was too laggy for video chat.  I bought an Airport Express (for the audio), and ran ethernet to connect it to the network and the Apple TV, but things were still slow.
    Now, I set the Airport Express up as a DHCP server (with NAT) itself, with a separate SSID, and it's working great.  The only problem is that people would rather not have to switch wifi networks.  Is there any way around this?  BTW, the AirEx is complaining about Double NAT, which I understand is happening, but it's still working fine... it's really just the having to switch networks that's a problem for us.
    Thanks!

    Hi - as you probably know, double NAT is not recommended - you might have problems with some websites and updating - but if it is working that is great - as far as the Wi-Fi issue is concerned, you should still be able to create a wireless network with the same name an password as the rest of your network so no one has to switch.

  • Can't connect to a VPN through Airport Extreme Base Station

    I'm unable to connect through my Airport Extreme Base Station to my office via VPN. Is there something needed to be set up specially?
    I'm using a notebook with WindowXP which connects to internet just fine.

    Here is info:
    Airport Utility finds an Airport Extreme with 802.11n(fast ethernet)
    Base Station Name: Home
    IP Address: 10.0.1.1
    Airport ID: 00:19:E3:FA:A8:32
    This is not the IP address of the modem. Even though light is green on Base station the ATV doesn't make the wireless connection.

  • Can you connect the apple tv through a Sony audio visual receiver that has hdmi inputs?

    http://www.lowes.com/pd_329379-53027-EL0529BK_0__?catalogId=

    The 2 input HDMI ports on Comcast X1 DVR box are disabled by comcast and comcast might never enable these ports.
    http://forums.comcast.com/t5/X1/X1-HDMI-input-ports/td-p/1992333

  • My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

    My Blu-Ray player has a USB input but it doesn't have an HDMI input. Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter? It would allow me to run the audio through my stereo. Thanks to all for your help.

    Can I connect my Apple TV to the Blu-Ray using an HDMI/ USB adapter?
    If you can find such a thing.  I really doubt that exists since USB is a data connector not a video connector.
    would allow me to run the audio through my stereo.     
    That would depend on this adapter.

  • Can you connect 2 apple TV's to the same iTunes account in 2 different houses ?

    Can you connect 2 apple TV's to the same iTunes account in 2 different houses ?

    Can you watch them both at the same time?

  • I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

    I am using only one Apple ID. The problem, since iOS 6,  is the App Store purchased items screen just shows loading screen  it finally crashes or gives the error message 'can not connect to  Apple store'

  • Can I connect two apple tv on same network and same apple ID at a time ?

    Can I connect two apple tv on same network and same apple ID at a time ?

    Welcome to the  Discussion Forums.
    Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though.

  • My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket .. Help!

    My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
    Help!

    No, unless you are using a home theatre system already, your only option is to connect to the TV.

  • Can iphone connect to apple tv?

    Can iphone connect to apple tv?

    Welcome to the Apple Community.
    You can send video and audio to an Apple TV via Airplay if that is what you mean, your question isn't very clear.

  • I can not connect my apple wireless keyboard to my iPad Mini?

    I can not connect my apple wireless keyboard to my iPad Mini?

    I can see it in the Bluetooth menu but it will not connect? The keyboard has new battery's but the light on the keyboard does not stay lite?

  • Can i connect my apple magic mouse and my apple wireless keybord with my pc?

    can i connect my apple magic mouse and my apple wireless keybord with my pc?

    try it find out

  • HT4262 How can I connect 6 computers simultaneously to Airport extreme?

    I have tried troubleshooting several ways and the some computers work and others don't. How can I connect 6 wireless computers to Airport Extreme?

    Matt
    Is it possible to speak on the phone?  The situation is so convoluted it might be easier to help me get back on track in person. When I first had this issue I got on an apple site that had a chat room in which I typed in my problem.  After several missives back and forth, the apple technician asked for my number and we spoke on the phone. The technician walked me through rebooting the actual airport plug (as opposed to the router box) and got me up and running. Do you know how I can relocate that chat site for technical support?
    Thanks
    David

  • Can i connect to the database through the internet

    hi all
    i installed a database oracle 8i enterprise edition on a pc that exists in a town far from me . i wonder can i connect to this database through the internet from my house
    please i need a answer
    thanks in advance

    You can connect from an Oracle client to any Oracle database in the world that meets certain requirements.
    First you need an open network connection between the two points so either no firewall exists between the two stations or the firewall(s) have been configured to allow Oranet traffic. This means both databases must have access to the Internet and certain ports are open.
    Second you will need the IP address and port for the remote listener, which in turn must be up and running on the target server.
    Then you must have the Service Name or SID and a valid username/password combination for the target database. Plus the username must have create session privilege.
    That should be about it.
    HTH -- Mark D Powell --

Maybe you are looking for