OS 10.8.3 saves unwanted changes
Just upgraded OS to 10.8.3 from 10.6.?. Have a couple of quirks I'm hoping someone can resolve.
1st one is, when I make any changes to a document in pages or a spreadsheet in numbers, I don't always want to save the changes. In the past I would simple close the document by hitting the red circle, but NOW it automatically saves my changes. I need to control what changes I make and sometimes I don't want to save things. After a 2nd review of the program, I don't even see a save option.
Please tell me how to correct this so when I close a document I don't have to save it.
2nd issue involved safari. I use to be able to have a screen open with whatever content I was looking at. I then could select a website from my desk top and it would open a 2nd window. Now it doesn't, unless I select a new window from the File before selecting a website off my desk top. How do I make my safari program open a new window without me having to select one first.
You can enable a preference in Mountain Lion to ask you to save changes in System Preferences > General.
Similar Messages
-
Will updating from CS6 to CC Indesign cause any unwanted changes to existing CS6 documents?
Will updating from CS6 to CC Indesign cause any unwanted changes to existing CS6 documents?
The update itself will not affect exisiting files, but if you open and save them in CCC you will no longer be able to open them in CS6.
-
I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?
Hi Atrec,
If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
Regards,
Ian. -
Create a Procedural ALV Report with editable fields and save the changes
Hi,
I am new to ABAP. I have created a Procedural ALV Report with 3 fields. I want to make 2 fields editable. When executed, if the fields are modified, I want to save the changes. All this I want to do without using OO concepts. Please help . Also, I checked out the forum and also the examples
BCALV_TEST_GRID_EDIT_01
BCALV_TEST_GRID_EDIT_02
BCALV_TEST_GRID_EDIT_04_FORMS
BCALV_TEST_GRID_EDITABLE
BCALV_EDIT_01
BCALV_EDIT_02
BCALV_EDIT_03
BCALV_EDIT_04
BCALV_EDIT_05
BCALV_EDIT_06
BCALV_EDIT_07
BCALV_EDIT_08
BCALV_FULLSCREEN_GRID_EDIT
But all these are using OO Concepts.
Please help.
Regards,
SmruthiTABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) TYPE c, "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-edit = 'X'
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_pf_status_set = 'STATUS'
i_callback_top_of_page = 'TOP-OF-PAGE'
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekko.
LOOP AT it_ekko INTO wa_ekko.
ld_color = ld_color + 1.
IF ld_color = 8.
ld_color = 1.
ENDIF.
CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
MODIFY it_ekko FROM wa_ekko.
ENDLOOP.
ENDFORM. " DATA_RETRIEVAL
FORM top-of-page *
FORM top-of-page.
WRITE:/ 'This is First Line of the Page'.
ENDFORM.
FORM status *
FORM status USING rt_extab TYPE slis_t_extab. .
SET PF-STATUS 'ALV'.
ENDFORM.
FORM USER_COMMAND *
--> RF_UCOMM *
--> RS *
FORM user_command USING rf_ucomm LIKE sy-ucomm
rs TYPE slis_selfield.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref1.
CALL METHOD ref1->check_changed_data.
CASE rf_ucomm.
when 'SAVE'.
get all the modified entries and store them in an internal table and udpate them in to the required transaction or your custom table.
endcase.
endform.
ENDFORM.
here u need to 2 performs for PF status and USER_COMMAND in the ALV parameters.
create a custom PF status and create push buttons and assign your ok codes in your PF status.
if the field has to be edited in the ALV then pass EDIT = 'X' for that field in the fieldcatlog preparation.
Hope this will help you.
Regards,
phani. -
I have a keynote presentation that includes a significant amount of video. When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)? I edit the presentation depending on the audience to which I am presenting.
If you add a new slide with just a text box (therefore a very small amount of data), to an existing presentation then save, Keynote will only save the new content to the file, it wont save pre-existing content as its already included in the file.
The time taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again. -
In Pages, In the past, I was able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file". And I can no longer open the actual template, when template is clicked, it automaticaly opens an "untitled" version???
In your description you say the first document opens as the Title you gave it.
Templates always open as Untitled so it sounds like you have saved a regular document, perhaps into your templates folder which is possible.
Since you have already worked on it and it has been previously saved, Lion will now Save for you and Save a Version is available
The other document does open as Untitled so sounds like a real template and as Peggy has pointed out will not have either Revert nor Save a Version until you Save it and have changed something in it.
This is a classic example of just how Apple's supposedly "simplification" of the process, is leading to confusion of what has happened. That the conditions and resulting actions from those conditions is so convoluted says it all.
It all reminds me of the Monty Python Life of Brian sketch with the "simplified" John Cleese instructions to the class, as to if you have a brother in an older dorm whether to hang your hat and bag on the hooks provided. The trouble is Apple does not get the joke, that it is transforming itself into a frequently self contradictory bumbling bureacracy. The price of unchallenged self appointed geniushood.
The incoherent half baked stumbling juggernaut has reached new triumphs with its edict on enforced Sandboxing on developers when it is unable to follow even its own instructions.
Peter -
Error while updating the Human task in JDeveloper. Can not save the changes
When I try to update my Human task the following error is occuring in JDeveloper and I can't save my changes, any help will be appreciable. thank you.
Uncaught exception
java.lang.NullPointerException
o.bpel.services.workflow.verification.impl.TaskContentAccess.getAccess(TaskContentAccess.java:127)
o.tip.tools.ide.workflow.util.AccessRulesUtil.getDefaultActionAccessData(AccessRulesUtil.java:265)
o.tip.tools.ide.workflow.util.AccessRulesUtil.getChangedActionAccessData(AccessRulesUtil.java:174)
o.tip.tools.ide.workflow.editor.tab.TaskActionAccessConfigurationPanel.getData(TaskActionAccessConfigurationPanel.java:272)
o.tip.tools.ide.workflow.editor.tab.TaskAccessConfigurationPanel.getActionData(TaskAccessConfigurationPanel.java:103)
o.tip.tools.ide.workflow.editor.tab.AdvancedOptionsPanel.getData(AdvancedOptionsPanel.java:215)
o.tip.tools.ide.workflow.editor.tab.AdvancedOptionsEditor$LocalPropertyChangeListener.propertyChange(AdvancedOptionsEditor.java:141)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.tab.AssigneesEditor.propertyChange(AssigneesEditor.java:186)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.v2.StageEditor.firePropertyChange(StageEditor.java:1488)
o.tip.tools.ide.workflow.editor.v2.StageEditor.propertyChange(StageEditor.java:1081)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
j.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
j.a.Component.firePropertyChange(Component.java:8128)
o.tip.tools.ide.workflow.editor.v2.ParticipantEditor.editParticipant(ParticipantEditor.java:1304)
o.tip.tools.ide.workflow.editor.v2.ParticipantEditor$LocalMouseAdapter.mouseClicked(ParticipantEditor.java:1004)
j.a.Component.processMouseEvent(Component.java:6266)
jx.s.JComponent.processMouseEvent(JComponent.java:3267)
j.a.Component.processEvent(Component.java:6028)
j.a.Container.processEvent(Container.java:2041)
j.a.Component.dispatchEventImpl(Component.java:4630)
j.a.Container.dispatchEventImpl(Container.java:2099)
j.a.Component.dispatchEvent(Component.java:4460)
j.a.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
j.a.LightweightDispatcher.processMouseEvent(Container.java:4247)
j.a.LightweightDispatcher.dispatchEvent(Container.java:4168)
j.a.Container.dispatchEventImpl(Container.java:2085)
j.a.Window.dispatchEventImpl(Window.java:2478)
j.a.Component.dispatchEvent(Component.java:4460)
j.a.EventQueue.dispatchEvent(EventQueue.java:599)
j.a.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
j.a.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
j.a.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
j.a.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
j.a.EventDispatchThread.run(EventDispatchThread.java:122)Resolved ..
It was an issue with permissions .
Thanks -
i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer.
Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails.
However, when i try to create a form using item content type, it creates a form successfully.
Could you please let me know hte workaroud for this.
TnxHello,
This link may be help you to create custom form using content types:
http://blog.splibrarian.com/2011/03/21/using-content-types-to-modify-the-newform-aspx-and-editform-aspx-pages/
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help <br/>(On vacation from 16th Oct to 28th Oct 2014) -
How to suppress 'Do u want to save the changes?' When there are no changes
Hi All,
I have developed one form,which contains 3 blocks in that 2 are database blocks and one is control block.It's working fine.When I close the form without doing any change also it is showing an alert as 'Do you want to save the changes you have made?'. How can I suppress that alert when I haven't made any change to the form.
I am displaying one filed in the database block as 'null' until check box is checked.For that I have written code in when-new-block-instance trigger of that block.
There I wrote SET_RECORD_PROPERTY (GET_BLOCK_PROPERTY (:SYSTEM.TRIGGER_BLOCK, CURRENT_RECORD), :SYSTEM.TRIGGER_BLOCK, STATUS, QUERY_STATUS); also to change the block status as query.
But it is not working, still I am getting the alert,How can I solve this could anyone please give me a suggestion..
Thanks in advance.So, this functionality can be done through CHECK BOX itself. Why you are making null by WHEN-NEW-BLOCK-INSTANCE. You can just set the update and insert property for that fields and rest things you can control from chexbox. And WHEN-BLOCK-INSTANCE-TRIGGER will fire once when you will access that block. If you want to set the same functionality for each record. Then you must use WHEN-NEW-RECORD-INSTANCE. for ex.
Trigger = WHEN-NEW-RECORD-INSTANCE (BLOCK-LEVEL)
Here i will assume that if check box is checked then he can update that fields.
IF :CHECKBOX='Y' THEN
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',INSERT_ALLOWED,PROPERTY_TRUE);
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',UPDATEABLE,PROPERTY_TRUE);
ELSE
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',INSERT_ALLOWED,PROPERTY_FALSE);
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',UPDATEABLE,PROPERTY_FALSE);
END IF;In the above code no need for set value to NULL.
And on CHECK BOX you can write like this...
Trigger WHEN-CHECKBOX-CHANGED (ITEM-LEVEL)
IF :CHECKBOX='Y' THEN
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',INSERT_ALLOWED,PROPERTY_TRUE);
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',UPDATEABLE,PROPERTY_TRUE);
ELSE
:FIELD_NAME:=NULL; -- here if check box is unchecked then it will set value to NULL
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',INSERT_ALLOWED,PROPERTY_FALSE);
SET_ITEM_PROPERTY('BLOCK_NAME.ITEM_NAME',UPDATEABLE,PROPERTY_FALSE);
END IF;-Ammad -
How to avoid the message "Do you want to save the changes you have made?"
i have 3 forms
master block
detail1 block of master
detail2 block of detail1
when i go out of detail1 and detail2 blocks after doing some modifications it asks me "Do you want to save the changes you have made"?
i want to avoid this message as well as my changes should be posted in the database. what is the solution for this big pblm?hi
may be you are trying to modify the database item or reassigning the database item value which is not actually needed.
try to comment the reassigning database values
and give clear_form(do_commit);
most probably u will not get the message again
Regards
Rajdeep .A -
Dialog Box as "Do you want to save the changes?" in Forms.
Hi,
I have 4 datablocks in my forms that corresponds View.
In the form design, I have a canvas(multiple inserting design) with two buttons that calls the other two blocks.
Am inserting the records in the following way,
In first record,
am entering the value in one block, then a button-press event and so it opens another canvas where I enter some values then return to my main canvas. This is one row.
But while I try to insert in the second row, there arises the dialog box as "Do you want to save the changes"?
I should not get that dialog box.
Please suggest me with the solution.
Regards,
MiniThanks for the response,
Let me clearly explain.
I have 3 blocks created from view not table.
I have a canvas in the multiple display layout i.e Number of items displayed is 10.
In that canvas, I have set the two buttons. the button event is calling another canvas.
Am inserting a record in the first row in the following sequence.
Inserting the values for some fields in the main canvas, then entering the button, it opens another canvas that responds to another block, there am entering some values and closing the button event canvas, then returning to my main canvas, then entering the remaining fields with the values, thus my first row ends.
Now I want to enter the values in the second row, while I navigate from the first Row to the Second row, there arises the dialog box as to save the changes or not?
I should not get the dialog box.
Am inserting the values in the database using Insert statements in all the blocks.
Hope U understand the issue.
Suggest me with the solution.
Regards,
Mini. -
I am viewing a crossword(HTML file) prepared by me, on FIREFOX. I wish to change the color of the blank squares (which are black now), to improve the appearance of CW. I have located the appropriate place on the "Page Source" file for effecting the change. ''But, I am not able to effect the change, as the file does not accept the editing.'' Please, advise
how I can effect the change and also save the changes effected...ThanksIt is View > Page Source and not Edit > Source, so you can't make changes to the source in Firefox.<br />
You will have to do that via an external editor.<br />
You can also override CS style rules with the Stylish extension.
* https://addons.mozilla.org/firefox/addon/2108 - Stylish -
In Photoshop Elements 12, is there a way to batch process all photos in a file with 'Auto Tone' and save the changes?
Thank you, that was perfect!
Yoni -
I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
Working with a Retina Macbook Pro and current software
These are newly created documents -
View Object Editor in JHS 10.1.2 does not save any changes....
Hi,
When I did exactly as the JHeadstart Tutorial says, I noticed that
in JHeadstart 10.1.2 with JDeveloper 10.1.2
JHeadstart does not save any changes I make in the View Object Editor
of the Application Structure File Editor !!!
For instance when I change the Width property of an Attribute from 60 to 5
it changes to 5, but when close the View Object Editor
and reopen it again, the Width is back to 60...
Even when I click the button "Validate the Application Structure File" before
closing the VO Editor....
What do I do ??? Is the only solution to edit the XML file
or something like that without using the VO Editor ?
Or is there a better solution ?
Does it maybe work in an older version of JHeadstart ?
If so, where is the older version available for download ?
Thanks,
Eric JoosseEric,
How did you leave the JHeadstart VO editor?
The changes should be saved when you click the OK button in the VO editor itself, but they are not saved if you click Cancel, or the little cross in the upper right corner, or leave it open while going back to the Application Structure File editor. That's because it's a standalone editor (you can also find it when right-mouse-clicking the VO in the Model project). The icon in the Application Structure File editor is just a quick way to get to it.
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting
Maybe you are looking for
-
Hi, I'm using WebUtil to have user upload the file from their computers to server, but the file on the server got the date they're uploaded, not the original date they've been created, is there any way I can set it up to keep the original file date?
-
Creating fixed slots in calendar
I have 3 meeting rooms available to be reserved in the same slots. Using Outlook 2013, I would like to create a frame schedule for each of the rooms, with the available slots (for instance, a half an hour window), which are then used by executive ass
-
I am unable to open elements 4. it keeps telling me I do not have the appropriate permissions.
I have tried repairing or deleting it from the control panel, and with the CD. I am getting error code 1321. Can you help please.
-
i've had this Macbook for two months, and it is literally the slowest laptop i've ever used. applications sometimes take 3 minutes to open, and if i have a few things open (like MS word, Safari, itunes, and photo booth) then it gets extremely slow. i
-
Acabo de recibi el iphone 5S y desde que le hice el backup dice que está descargando las fotos y aunque ya lo reinicié dos veces no cambia el problema. Que puedo hacer?